linux/Documentation/hwmon/max20730.rst
Ugur Usug 5c9353f5f8 hwmon: (pmbus/max20730) Add max20710 support
Add support for max20710 into the existing max20730 driver.

Signed-off-by: Ugur Usug <ugur.usug@maximintegrated.com>
Link: https://lore.kernel.org/r/BYAPR11MB317423C13909AE6F1913BBD7FD9C0@BYAPR11MB3174.namprd11.prod.outlook.com
[groeck: Fixed various whitespace errors]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-07-24 07:44:18 -07:00

83 lines
2.3 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0-or-later
Kernel driver max20730
======================
Supported chips:
* Maxim MAX20710
Prefix: 'max20710'
Addresses scanned: -
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf
* Maxim MAX20730
Prefix: 'max20730'
Addresses scanned: -
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
* Maxim MAX20734
Prefix: 'max20734'
Addresses scanned: -
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
* Maxim MAX20743
Prefix: 'max20743'
Addresses scanned: -
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743
Integrated, Step-Down Switching Regulators with PMBus support.
The driver is a client driver to the core PMBus driver.
Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Usage Notes
-----------
This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
details.
Sysfs entries
-------------
=================== ===== =======================================================
curr1_crit RW/RO Critical output current. Please see datasheet for
supported limits. Read-only if the chip is
write protected; read-write otherwise.
curr1_crit_alarm RO Output current critical alarm
curr1_input RO Output current
curr1_label RO 'iout1'
in1_alarm RO Input voltage alarm
in1_input RO Input voltage
in1_label RO 'vin'
in2_alarm RO Output voltage alarm
in2_input RO Output voltage
in2_label RO 'vout1'
temp1_crit RW/RO Critical temeperature. Supported values are 130 or 150
degrees C. Read-only if the chip is write protected;
read-write otherwise.
temp1_crit_alarm RO Temperature critical alarm
temp1_input RO Chip temperature
=================== ===== =======================================================