linux/Documentation/hwmon/ir38064.rst
Mauro Carvalho Chehab e57695e772 docs: hwmon: convert three docs to ReST format
Those three new drivers were missed on the initial conversion
to ReST format. So:

- Rename them to .rst;
- Add them to the hwmon index.rst index;
- add some blank lines at the "Supported systems:" part, in
  order to allow Sphinx to properly identify new lines,
  suppressing warnings and avoid it to output some random
  lines in bold;
- When multiple authors are involved, change the authors
  part to a list, in order to avoid adding blank lines.
- adjust the table cells (one of the tables seemed to be
  assuming that tab is 4 positions instead of 8) and add
  the table markup.
- be sure that the section markups have the same number of
  characters as the section title.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 15:27:27 -07:00

67 lines
1.8 KiB
ReStructuredText

Kernel driver ir38064
=====================
Supported chips:
* Infineon IR38064
Prefix: 'ir38064'
Addresses scanned: -
Datasheet: Publicly available at the Infineon webiste
https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
Authors:
- Maxim Sloyko <maxims@google.com>
- Patrick Venture <venture@google.com>
Description
-----------
IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Sysfs attributes
----------------
======================= ===========================
curr1_label "iout1"
curr1_input Measured output current
curr1_crit Critical maximum current
curr1_crit_alarm Current critical high alarm
curr1_max Maximum current
curr1_max_alarm Current high alarm
in1_label "vin"
in1_input Measured input voltage
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
in1_min Minimum input voltage
in1_min_alarm Input voltage low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_lcrit Critical minimum output voltage
in2_lcrit_alarm Output voltage critical low alarm
in2_crit Critical maximum output voltage
in2_crit_alarm Output voltage critical high alarm
in2_max Maximum output voltage
in2_max_alarm Output voltage high alarm
in2_min Minimum output voltage
in2_min_alarm Output voltage low alarm
power1_label "pout1"
power1_input Measured output power
temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
temp1_max Maximum temperature
temp1_max_alarm Chip temperature high alarm
======================= ===========================