linux/arch/arc/include/asm/cacheflush.h
Vineet Gupta f5db19e93f ARC: dma: ioremap: use phys_addr_t consistenctly in code paths
To support dma in physical memory beyond 4GB with PAE40

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-19 14:34:09 +05:30

119 lines
3.8 KiB
C

/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
* -flush_cache_dup_mm (fork)
* -likewise for flush_cache_mm (exit/execve)
* -likewise for flush_cache_{range,page} (munmap, exit, COW-break)
*
* vineetg: April 2008
* -Added a critical CacheLine flush to copy_to_user_page( ) which
* was causing gdbserver to not setup breakpoints consistently
*/
#ifndef _ASM_CACHEFLUSH_H
#define _ASM_CACHEFLUSH_H
#include <linux/mm.h>
#include <asm/shmparam.h>
/*
* Semantically we need this because icache doesn't snoop dcache/dma.
* However ARC Cache flush requires paddr as well as vaddr, latter not available
* in the flush_icache_page() API. So we no-op it but do the equivalent work
* in update_mmu_cache()
*/
#define flush_icache_page(vma, page)
void flush_cache_all(void);
void flush_icache_range(unsigned long kstart, unsigned long kend);
void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
void flush_dcache_page(struct page *page);
void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
void dma_cache_inv(phys_addr_t start, unsigned long sz);
void dma_cache_wback(phys_addr_t start, unsigned long sz);
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
/* TBD: optimize this */
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
#define flush_cache_dup_mm(mm) /* called on fork (VIVT only) */
#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
#define flush_cache_mm(mm) /* called on munmap/exit */
#define flush_cache_range(mm, u_vstart, u_vend)
#define flush_cache_page(vma, u_vaddr, pfn) /* PF handling/COW-break */
#else /* VIPT aliasing dcache */
/* To clear out stale userspace mappings */
void flush_cache_mm(struct mm_struct *mm);
void flush_cache_range(struct vm_area_struct *vma,
unsigned long start,unsigned long end);
void flush_cache_page(struct vm_area_struct *vma,
unsigned long user_addr, unsigned long page);
/*
* To make sure that userspace mapping is flushed to memory before
* get_user_pages() uses a kernel mapping to access the page
*/
#define ARCH_HAS_FLUSH_ANON_PAGE
void flush_anon_page(struct vm_area_struct *vma,
struct page *page, unsigned long u_vaddr);
#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */
/*
* A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
* This works around some PIO based drivers which don't call flush_dcache_page
* to record that they dirtied the dcache
*/
#define PG_dc_clean PG_arch_1
/*
* Simple wrapper over config option
* Bootup code ensures that hardware matches kernel configuration
*/
static inline int cache_is_vipt_aliasing(void)
{
return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
}
#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & 1)
/*
* checks if two addresses (after page aligning) index into same cache set
*/
#define addr_not_cache_congruent(addr1, addr2) \
({ \
cache_is_vipt_aliasing() ? \
(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \
})
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
memcpy(dst, src, len); \
if (vma->vm_flags & VM_EXEC) \
__sync_icache_dcache((unsigned long)(dst), vaddr, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
memcpy(dst, src, len); \
#endif