linux/drivers/usb/host/whci/pzl.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

418 lines
10 KiB
C

/*
* Wireless Host Controller (WHC) periodic schedule management.
*
* Copyright (C) 2007 Cambridge Silicon Radio Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/dma-mapping.h>
#include <linux/uwb/umc.h>
#include <linux/usb.h>
#include "../../wusbcore/wusbhc.h"
#include "whcd.h"
static void update_pzl_pointers(struct whc *whc, int period, u64 addr)
{
switch (period) {
case 0:
whc_qset_set_link_ptr(&whc->pz_list[0], addr);
whc_qset_set_link_ptr(&whc->pz_list[2], addr);
whc_qset_set_link_ptr(&whc->pz_list[4], addr);
whc_qset_set_link_ptr(&whc->pz_list[6], addr);
whc_qset_set_link_ptr(&whc->pz_list[8], addr);
whc_qset_set_link_ptr(&whc->pz_list[10], addr);
whc_qset_set_link_ptr(&whc->pz_list[12], addr);
whc_qset_set_link_ptr(&whc->pz_list[14], addr);
break;
case 1:
whc_qset_set_link_ptr(&whc->pz_list[1], addr);
whc_qset_set_link_ptr(&whc->pz_list[5], addr);
whc_qset_set_link_ptr(&whc->pz_list[9], addr);
whc_qset_set_link_ptr(&whc->pz_list[13], addr);
break;
case 2:
whc_qset_set_link_ptr(&whc->pz_list[3], addr);
whc_qset_set_link_ptr(&whc->pz_list[11], addr);
break;
case 3:
whc_qset_set_link_ptr(&whc->pz_list[7], addr);
break;
case 4:
whc_qset_set_link_ptr(&whc->pz_list[15], addr);
break;
}
}
/*
* Return the 'period' to use for this qset. The minimum interval for
* the endpoint is used so whatever urbs are submitted the device is
* polled often enough.
*/
static int qset_get_period(struct whc *whc, struct whc_qset *qset)
{
uint8_t bInterval = qset->ep->desc.bInterval;
if (bInterval < 6)
bInterval = 6;
if (bInterval > 10)
bInterval = 10;
return bInterval - 6;
}
static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset)
{
int period;
period = qset_get_period(whc, qset);
qset_clear(whc, qset);
list_move(&qset->list_node, &whc->periodic_list[period]);
qset->in_sw_list = true;
}
static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset)
{
list_move(&qset->list_node, &whc->periodic_removed_list);
qset->in_hw_list = false;
qset->in_sw_list = false;
}
/**
* pzl_process_qset - process any recently inactivated or halted qTDs
* in a qset.
*
* After inactive qTDs are removed, new qTDs can be added if the
* urb queue still contains URBs.
*
* Returns the schedule updates required.
*/
static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
{
enum whc_update update = 0;
uint32_t status = 0;
while (qset->ntds) {
struct whc_qtd *td;
int t;
t = qset->td_start;
td = &qset->qtd[qset->td_start];
status = le32_to_cpu(td->status);
/*
* Nothing to do with a still active qTD.
*/
if (status & QTD_STS_ACTIVE)
break;
if (status & QTD_STS_HALTED) {
/* Ug, an error. */
process_halted_qtd(whc, qset, td);
/* A halted qTD always triggers an update
because the qset was either removed or
reactivated. */
update |= WHC_UPDATE_UPDATED;
goto done;
}
/* Mmm, a completed qTD. */
process_inactive_qtd(whc, qset, td);
}
if (!qset->remove)
update |= qset_add_qtds(whc, qset);
done:
/*
* If there are no qTDs in this qset, remove it from the PZL.
*/
if (qset->remove && qset->ntds == 0) {
pzl_qset_remove(whc, qset);
update |= WHC_UPDATE_REMOVED;
}
return update;
}
/**
* pzl_start - start the periodic schedule
* @whc: the WHCI host controller
*
* The PZL must be valid (e.g., all entries in the list should have
* the T bit set).
*/
void pzl_start(struct whc *whc)
{
le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN);
whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED,
1000, "start PZL");
}
/**
* pzl_stop - stop the periodic schedule
* @whc: the WHCI host controller
*/
void pzl_stop(struct whc *whc)
{
whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0);
whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS,
WUSBSTS_PERIODIC_SCHED, 0,
1000, "stop PZL");
}
/**
* pzl_update - request a PZL update and wait for the hardware to be synced
* @whc: the WHCI HC
* @wusbcmd: WUSBCMD value to start the update.
*
* If the WUSB HC is inactive (i.e., the PZL is stopped) then the
* update must be skipped as the hardware may not respond to update
* requests.
*/
void pzl_update(struct whc *whc, uint32_t wusbcmd)
{
struct wusbhc *wusbhc = &whc->wusbhc;
long t;
mutex_lock(&wusbhc->mutex);
if (wusbhc->active) {
whc_write_wusbcmd(whc, wusbcmd, wusbcmd);
t = wait_event_timeout(
whc->periodic_list_wq,
(le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0,
msecs_to_jiffies(1000));
if (t == 0)
whc_hw_error(whc, "PZL update timeout");
}
mutex_unlock(&wusbhc->mutex);
}
static void update_pzl_hw_view(struct whc *whc)
{
struct whc_qset *qset, *t;
int period;
u64 tmp_qh = 0;
for (period = 0; period < 5; period++) {
list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
whc_qset_set_link_ptr(&qset->qh.link, tmp_qh);
tmp_qh = qset->qset_dma;
qset->in_hw_list = true;
}
update_pzl_pointers(whc, period, tmp_qh);
}
}
/**
* scan_periodic_work - scan the PZL for qsets to process.
*
* Process each qset in the PZL in turn and then signal the WHC that
* the PZL has been updated.
*
* Then start, stop or update the periodic schedule as required.
*/
void scan_periodic_work(struct work_struct *work)
{
struct whc *whc = container_of(work, struct whc, periodic_work);
struct whc_qset *qset, *t;
enum whc_update update = 0;
int period;
spin_lock_irq(&whc->lock);
for (period = 4; period >= 0; period--) {
list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) {
if (!qset->in_hw_list)
update |= WHC_UPDATE_ADDED;
update |= pzl_process_qset(whc, qset);
}
}
if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED))
update_pzl_hw_view(whc);
spin_unlock_irq(&whc->lock);
if (update) {
uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB;
if (update & WHC_UPDATE_REMOVED)
wusbcmd |= WUSBCMD_PERIODIC_QSET_RM;
pzl_update(whc, wusbcmd);
}
/*
* Now that the PZL is updated, complete the removal of any
* removed qsets.
*
* If the qset was to be reset, do so and reinsert it into the
* PZL if it has pending transfers.
*/
spin_lock_irq(&whc->lock);
list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) {
qset_remove_complete(whc, qset);
if (qset->reset) {
qset_reset(whc, qset);
if (!list_empty(&qset->stds)) {
qset_insert_in_sw_list(whc, qset);
queue_work(whc->workqueue, &whc->periodic_work);
}
}
}
spin_unlock_irq(&whc->lock);
}
/**
* pzl_urb_enqueue - queue an URB onto the periodic list (PZL)
* @whc: the WHCI host controller
* @urb: the URB to enqueue
* @mem_flags: flags for any memory allocations
*
* The qset for the endpoint is obtained and the urb queued on to it.
*
* Work is scheduled to update the hardware's view of the PZL.
*/
int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
{
struct whc_qset *qset;
int err;
unsigned long flags;
spin_lock_irqsave(&whc->lock, flags);
err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (err < 0) {
spin_unlock_irqrestore(&whc->lock, flags);
return err;
}
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
if (!qset->in_sw_list && !qset->remove)
qset_insert_in_sw_list(whc, qset);
} else
usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->periodic_work);
return err;
}
/**
* pzl_urb_dequeue - remove an URB (qset) from the periodic list
* @whc: the WHCI host controller
* @urb: the URB to dequeue
* @status: the current status of the URB
*
* URBs that do yet have qTDs can simply be removed from the software
* queue, otherwise the qset must be removed so the qTDs can be safely
* removed.
*/
int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status)
{
struct whc_urb *wurb = urb->hcpriv;
struct whc_qset *qset = wurb->qset;
struct whc_std *std, *t;
bool has_qtd = false;
int ret;
unsigned long flags;
spin_lock_irqsave(&whc->lock, flags);
ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status);
if (ret < 0)
goto out;
list_for_each_entry_safe(std, t, &qset->stds, list_node) {
if (std->urb == urb) {
if (std->qtd)
has_qtd = true;
qset_free_std(whc, std);
} else
std->qtd = NULL; /* so this std is re-added when the qset is */
}
if (has_qtd) {
pzl_qset_remove(whc, qset);
update_pzl_hw_view(whc);
wurb->status = status;
wurb->is_async = false;
queue_work(whc->workqueue, &wurb->dequeue_work);
} else
qset_remove_urb(whc, qset, urb, status);
out:
spin_unlock_irqrestore(&whc->lock, flags);
return ret;
}
/**
* pzl_qset_delete - delete a qset from the PZL
*/
void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
{
qset->remove = 1;
queue_work(whc->workqueue, &whc->periodic_work);
qset_delete(whc, qset);
}
/**
* pzl_init - initialize the periodic zone list
* @whc: the WHCI host controller
*/
int pzl_init(struct whc *whc)
{
int i;
whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16,
&whc->pz_list_dma, GFP_KERNEL);
if (whc->pz_list == NULL)
return -ENOMEM;
/* Set T bit on all elements in PZL. */
for (i = 0; i < 16; i++)
whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T);
le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE);
return 0;
}
/**
* pzl_clean_up - free PZL resources
* @whc: the WHCI host controller
*
* The PZL is stopped and empty.
*/
void pzl_clean_up(struct whc *whc)
{
if (whc->pz_list)
dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list,
whc->pz_list_dma);
}