mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
15c9583904
The transmitter and receiver part of the SAI interface need to be configured with different master/slave mode, especially to work with the audiomix module. +-------+ +-----------+ | SAI1 | --TX--> | | | | <--RX-- | | +-------+ | | | AUDIOMIX | +-------+ | | | SAI2 | --TX--> | | +-------+ +-----------+ The SAI1 TX is in master mode, but SAI1 RX is in slave mode. So add another two DAIs for TX and RX separately. but only defined fsl_sai_set_dai_fmt_tx() and fsl_sai_set_dai_fmt_rx() ops function for current case, in the future, the other ops function for TX and RX can be defined if required. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://patch.msgid.link/1718174452-17596-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
1832 lines
48 KiB
C
1832 lines
48 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Freescale ALSA SoC Digital Audio Interface (SAI) driver.
|
|
//
|
|
// Copyright 2012-2015 Freescale Semiconductor, Inc.
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/time.h>
|
|
#include <sound/core.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
|
|
|
|
#include "fsl_sai.h"
|
|
#include "fsl_utils.h"
|
|
#include "imx-pcm.h"
|
|
|
|
#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
|
|
FSL_SAI_CSR_FEIE)
|
|
|
|
static const unsigned int fsl_sai_rates[] = {
|
|
8000, 11025, 12000, 16000, 22050,
|
|
24000, 32000, 44100, 48000, 64000,
|
|
88200, 96000, 176400, 192000, 352800,
|
|
384000, 705600, 768000, 1411200, 2822400,
|
|
};
|
|
|
|
static const struct snd_pcm_hw_constraint_list fsl_sai_rate_constraints = {
|
|
.count = ARRAY_SIZE(fsl_sai_rates),
|
|
.list = fsl_sai_rates,
|
|
};
|
|
|
|
/**
|
|
* fsl_sai_dir_is_synced - Check if stream is synced by the opposite stream
|
|
*
|
|
* SAI supports synchronous mode using bit/frame clocks of either Transmitter's
|
|
* or Receiver's for both streams. This function is used to check if clocks of
|
|
* the stream's are synced by the opposite stream.
|
|
*
|
|
* @sai: SAI context
|
|
* @dir: stream direction
|
|
*/
|
|
static inline bool fsl_sai_dir_is_synced(struct fsl_sai *sai, int dir)
|
|
{
|
|
int adir = (dir == TX) ? RX : TX;
|
|
|
|
/* current dir in async mode while opposite dir in sync mode */
|
|
return !sai->synchronous[dir] && sai->synchronous[adir];
|
|
}
|
|
|
|
static struct pinctrl_state *fsl_sai_get_pins_state(struct fsl_sai *sai, u32 bclk)
|
|
{
|
|
struct pinctrl_state *state = NULL;
|
|
|
|
if (sai->is_pdm_mode) {
|
|
/* DSD512@44.1kHz, DSD512@48kHz */
|
|
if (bclk >= 22579200)
|
|
state = pinctrl_lookup_state(sai->pinctrl, "dsd512");
|
|
|
|
/* Get default DSD state */
|
|
if (IS_ERR_OR_NULL(state))
|
|
state = pinctrl_lookup_state(sai->pinctrl, "dsd");
|
|
} else {
|
|
/* 706k32b2c, 768k32b2c, etc */
|
|
if (bclk >= 45158400)
|
|
state = pinctrl_lookup_state(sai->pinctrl, "pcm_b2m");
|
|
}
|
|
|
|
/* Get default state */
|
|
if (IS_ERR_OR_NULL(state))
|
|
state = pinctrl_lookup_state(sai->pinctrl, "default");
|
|
|
|
return state;
|
|
}
|
|
|
|
static irqreturn_t fsl_sai_isr(int irq, void *devid)
|
|
{
|
|
struct fsl_sai *sai = (struct fsl_sai *)devid;
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
struct device *dev = &sai->pdev->dev;
|
|
u32 flags, xcsr, mask;
|
|
irqreturn_t iret = IRQ_NONE;
|
|
|
|
/*
|
|
* Both IRQ status bits and IRQ mask bits are in the xCSR but
|
|
* different shifts. And we here create a mask only for those
|
|
* IRQs that we activated.
|
|
*/
|
|
mask = (FSL_SAI_FLAGS >> FSL_SAI_CSR_xIE_SHIFT) << FSL_SAI_CSR_xF_SHIFT;
|
|
|
|
/* Tx IRQ */
|
|
regmap_read(sai->regmap, FSL_SAI_TCSR(ofs), &xcsr);
|
|
flags = xcsr & mask;
|
|
|
|
if (flags)
|
|
iret = IRQ_HANDLED;
|
|
else
|
|
goto irq_rx;
|
|
|
|
if (flags & FSL_SAI_CSR_WSF)
|
|
dev_dbg(dev, "isr: Start of Tx word detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_SEF)
|
|
dev_dbg(dev, "isr: Tx Frame sync error detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FEF)
|
|
dev_dbg(dev, "isr: Transmit underrun detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FWF)
|
|
dev_dbg(dev, "isr: Enabled transmit FIFO is empty\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FRF)
|
|
dev_dbg(dev, "isr: Transmit FIFO watermark has been reached\n");
|
|
|
|
flags &= FSL_SAI_CSR_xF_W_MASK;
|
|
xcsr &= ~FSL_SAI_CSR_xF_MASK;
|
|
|
|
if (flags)
|
|
regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), flags | xcsr);
|
|
|
|
irq_rx:
|
|
/* Rx IRQ */
|
|
regmap_read(sai->regmap, FSL_SAI_RCSR(ofs), &xcsr);
|
|
flags = xcsr & mask;
|
|
|
|
if (flags)
|
|
iret = IRQ_HANDLED;
|
|
else
|
|
goto out;
|
|
|
|
if (flags & FSL_SAI_CSR_WSF)
|
|
dev_dbg(dev, "isr: Start of Rx word detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_SEF)
|
|
dev_dbg(dev, "isr: Rx Frame sync error detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FEF)
|
|
dev_dbg(dev, "isr: Receive overflow detected\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FWF)
|
|
dev_dbg(dev, "isr: Enabled receive FIFO is full\n");
|
|
|
|
if (flags & FSL_SAI_CSR_FRF)
|
|
dev_dbg(dev, "isr: Receive FIFO watermark has been reached\n");
|
|
|
|
flags &= FSL_SAI_CSR_xF_W_MASK;
|
|
xcsr &= ~FSL_SAI_CSR_xF_MASK;
|
|
|
|
if (flags)
|
|
regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), flags | xcsr);
|
|
|
|
out:
|
|
return iret;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask,
|
|
u32 rx_mask, int slots, int slot_width)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
sai->slots = slots;
|
|
sai->slot_width = slot_width;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_bclk_ratio(struct snd_soc_dai *dai,
|
|
unsigned int ratio)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
|
|
|
|
sai->bclk_ratio = ratio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, bool tx)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
u32 val_cr2 = 0;
|
|
|
|
switch (clk_id) {
|
|
case FSL_SAI_CLK_BUS:
|
|
val_cr2 |= FSL_SAI_CR2_MSEL_BUS;
|
|
break;
|
|
case FSL_SAI_CLK_MAST1:
|
|
val_cr2 |= FSL_SAI_CR2_MSEL_MCLK1;
|
|
break;
|
|
case FSL_SAI_CLK_MAST2:
|
|
val_cr2 |= FSL_SAI_CR2_MSEL_MCLK2;
|
|
break;
|
|
case FSL_SAI_CLK_MAST3:
|
|
val_cr2 |= FSL_SAI_CR2_MSEL_MCLK3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
|
|
FSL_SAI_CR2_MSEL_MASK, val_cr2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_set_mclk_rate(struct snd_soc_dai *dai, int clk_id, unsigned int freq)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
|
|
int ret;
|
|
|
|
fsl_asoc_reparent_pll_clocks(dai->dev, sai->mclk_clk[clk_id],
|
|
sai->pll8k_clk, sai->pll11k_clk, freq);
|
|
|
|
ret = clk_set_rate(sai->mclk_clk[clk_id], freq);
|
|
if (ret < 0)
|
|
dev_err(dai->dev, "failed to set clock rate (%u): %d\n", freq, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
int ret;
|
|
|
|
if (dir == SND_SOC_CLOCK_IN)
|
|
return 0;
|
|
|
|
if (freq > 0 && clk_id != FSL_SAI_CLK_BUS) {
|
|
if (clk_id < 0 || clk_id >= FSL_SAI_MCLK_MAX) {
|
|
dev_err(cpu_dai->dev, "Unknown clock id: %d\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ERR_OR_NULL(sai->mclk_clk[clk_id])) {
|
|
dev_err(cpu_dai->dev, "Unassigned clock: %d\n", clk_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (sai->mclk_streams == 0) {
|
|
ret = fsl_sai_set_mclk_rate(cpu_dai, clk_id, freq);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, true);
|
|
if (ret) {
|
|
dev_err(cpu_dai->dev, "Cannot set tx sysclk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = fsl_sai_set_dai_sysclk_tr(cpu_dai, clk_id, freq, false);
|
|
if (ret)
|
|
dev_err(cpu_dai->dev, "Cannot set rx sysclk: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt, bool tx)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
u32 val_cr2 = 0, val_cr4 = 0;
|
|
|
|
if (!sai->is_lsb_first)
|
|
val_cr4 |= FSL_SAI_CR4_MF;
|
|
|
|
sai->is_pdm_mode = false;
|
|
sai->is_dsp_mode = false;
|
|
/* DAI mode */
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
/*
|
|
* Frame low, 1clk before data, one word length for frame sync,
|
|
* frame sync starts one serial clock cycle earlier,
|
|
* that is, together with the last bit of the previous
|
|
* data word.
|
|
*/
|
|
val_cr2 |= FSL_SAI_CR2_BCP;
|
|
val_cr4 |= FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
/*
|
|
* Frame high, one word length for frame sync,
|
|
* frame sync asserts with the first bit of the frame.
|
|
*/
|
|
val_cr2 |= FSL_SAI_CR2_BCP;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
/*
|
|
* Frame high, 1clk before data, one bit for frame sync,
|
|
* frame sync starts one serial clock cycle earlier,
|
|
* that is, together with the last bit of the previous
|
|
* data word.
|
|
*/
|
|
val_cr2 |= FSL_SAI_CR2_BCP;
|
|
val_cr4 |= FSL_SAI_CR4_FSE;
|
|
sai->is_dsp_mode = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/*
|
|
* Frame high, one bit for frame sync,
|
|
* frame sync asserts with the first bit of the frame.
|
|
*/
|
|
val_cr2 |= FSL_SAI_CR2_BCP;
|
|
sai->is_dsp_mode = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_PDM:
|
|
val_cr2 |= FSL_SAI_CR2_BCP;
|
|
val_cr4 &= ~FSL_SAI_CR4_MF;
|
|
sai->is_pdm_mode = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
/* To be done */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* DAI clock inversion */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
/* Invert both clocks */
|
|
val_cr2 ^= FSL_SAI_CR2_BCP;
|
|
val_cr4 ^= FSL_SAI_CR4_FSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
/* Invert bit clock */
|
|
val_cr2 ^= FSL_SAI_CR2_BCP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
/* Invert frame clock */
|
|
val_cr4 ^= FSL_SAI_CR4_FSP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
/* Nothing to do for both normal cases */
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* DAI clock provider masks */
|
|
switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
|
|
case SND_SOC_DAIFMT_BP_FP:
|
|
val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
|
|
val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
|
|
sai->is_consumer_mode[tx] = false;
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FC:
|
|
sai->is_consumer_mode[tx] = true;
|
|
break;
|
|
case SND_SOC_DAIFMT_BP_FC:
|
|
val_cr2 |= FSL_SAI_CR2_BCD_MSTR;
|
|
sai->is_consumer_mode[tx] = false;
|
|
break;
|
|
case SND_SOC_DAIFMT_BC_FP:
|
|
val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
|
|
sai->is_consumer_mode[tx] = true;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
|
|
FSL_SAI_CR2_BCP | FSL_SAI_CR2_BCD_MSTR, val_cr2);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_MF | FSL_SAI_CR4_FSE |
|
|
FSL_SAI_CR4_FSP | FSL_SAI_CR4_FSD_MSTR, val_cr4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt)
|
|
{
|
|
int ret;
|
|
|
|
ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, true);
|
|
if (ret) {
|
|
dev_err(cpu_dai->dev, "Cannot set tx format: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, false);
|
|
if (ret)
|
|
dev_err(cpu_dai->dev, "Cannot set rx format: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_sai_set_dai_fmt_tx(struct snd_soc_dai *cpu_dai, unsigned int fmt)
|
|
{
|
|
return fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, true);
|
|
}
|
|
|
|
static int fsl_sai_set_dai_fmt_rx(struct snd_soc_dai *cpu_dai, unsigned int fmt)
|
|
{
|
|
return fsl_sai_set_dai_fmt_tr(cpu_dai, fmt, false);
|
|
}
|
|
|
|
static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(dai);
|
|
unsigned int reg, ofs = sai->soc_data->reg_offset;
|
|
unsigned long clk_rate;
|
|
u32 savediv = 0, ratio, bestdiff = freq;
|
|
int adir = tx ? RX : TX;
|
|
int dir = tx ? TX : RX;
|
|
u32 id;
|
|
bool support_1_1_ratio = sai->verid.version >= 0x0301;
|
|
|
|
/* Don't apply to consumer mode */
|
|
if (sai->is_consumer_mode[tx])
|
|
return 0;
|
|
|
|
/*
|
|
* There is no point in polling MCLK0 if it is identical to MCLK1.
|
|
* And given that MQS use case has to use MCLK1 though two clocks
|
|
* are the same, we simply skip MCLK0 and start to find from MCLK1.
|
|
*/
|
|
id = sai->soc_data->mclk0_is_mclk1 ? 1 : 0;
|
|
|
|
for (; id < FSL_SAI_MCLK_MAX; id++) {
|
|
int diff;
|
|
|
|
clk_rate = clk_get_rate(sai->mclk_clk[id]);
|
|
if (!clk_rate)
|
|
continue;
|
|
|
|
ratio = DIV_ROUND_CLOSEST(clk_rate, freq);
|
|
if (!ratio || ratio > 512)
|
|
continue;
|
|
if (ratio == 1 && !support_1_1_ratio)
|
|
continue;
|
|
if ((ratio & 1) && ratio > 1)
|
|
continue;
|
|
|
|
diff = abs((long)clk_rate - ratio * freq);
|
|
|
|
/*
|
|
* Drop the source that can not be
|
|
* divided into the required rate.
|
|
*/
|
|
if (diff != 0 && clk_rate / diff < 1000)
|
|
continue;
|
|
|
|
dev_dbg(dai->dev,
|
|
"ratio %d for freq %dHz based on clock %ldHz\n",
|
|
ratio, freq, clk_rate);
|
|
|
|
|
|
if (diff < bestdiff) {
|
|
savediv = ratio;
|
|
sai->mclk_id[tx] = id;
|
|
bestdiff = diff;
|
|
}
|
|
|
|
if (diff == 0)
|
|
break;
|
|
}
|
|
|
|
if (savediv == 0) {
|
|
dev_err(dai->dev, "failed to derive required %cx rate: %d\n",
|
|
tx ? 'T' : 'R', freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(dai->dev, "best fit: clock id=%d, div=%d, deviation =%d\n",
|
|
sai->mclk_id[tx], savediv, bestdiff);
|
|
|
|
/*
|
|
* 1) For Asynchronous mode, we must set RCR2 register for capture, and
|
|
* set TCR2 register for playback.
|
|
* 2) For Tx sync with Rx clock, we must set RCR2 register for playback
|
|
* and capture.
|
|
* 3) For Rx sync with Tx clock, we must set TCR2 register for playback
|
|
* and capture.
|
|
* 4) For Tx and Rx are both Synchronous with another SAI, we just
|
|
* ignore it.
|
|
*/
|
|
if (fsl_sai_dir_is_synced(sai, adir))
|
|
reg = FSL_SAI_xCR2(!tx, ofs);
|
|
else if (!sai->synchronous[dir])
|
|
reg = FSL_SAI_xCR2(tx, ofs);
|
|
else
|
|
return 0;
|
|
|
|
regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
|
|
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
|
|
|
|
if (savediv == 1) {
|
|
regmap_update_bits(sai->regmap, reg,
|
|
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
|
|
FSL_SAI_CR2_BYP);
|
|
if (fsl_sai_dir_is_synced(sai, adir))
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
|
|
FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI);
|
|
else
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
|
|
FSL_SAI_CR2_BCI, 0);
|
|
} else {
|
|
regmap_update_bits(sai->regmap, reg,
|
|
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
|
|
savediv / 2 - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
unsigned int channels = params_channels(params);
|
|
struct snd_dmaengine_dai_dma_data *dma_params;
|
|
struct fsl_sai_dl_cfg *dl_cfg = sai->dl_cfg;
|
|
u32 word_width = params_width(params);
|
|
int trce_mask = 0, dl_cfg_idx = 0;
|
|
int dl_cfg_cnt = sai->dl_cfg_cnt;
|
|
u32 dl_type = FSL_SAI_DL_I2S;
|
|
u32 val_cr4 = 0, val_cr5 = 0;
|
|
u32 slots = (channels == 1) ? 2 : channels;
|
|
u32 slot_width = word_width;
|
|
int adir = tx ? RX : TX;
|
|
u32 pins, bclk;
|
|
u32 watermark;
|
|
int ret, i;
|
|
|
|
if (sai->slot_width)
|
|
slot_width = sai->slot_width;
|
|
|
|
if (sai->slots)
|
|
slots = sai->slots;
|
|
else if (sai->bclk_ratio)
|
|
slots = sai->bclk_ratio / slot_width;
|
|
|
|
pins = DIV_ROUND_UP(channels, slots);
|
|
|
|
/*
|
|
* PDM mode, channels are independent
|
|
* each channels are on one dataline/FIFO.
|
|
*/
|
|
if (sai->is_pdm_mode) {
|
|
pins = channels;
|
|
dl_type = FSL_SAI_DL_PDM;
|
|
}
|
|
|
|
for (i = 0; i < dl_cfg_cnt; i++) {
|
|
if (dl_cfg[i].type == dl_type && dl_cfg[i].pins[tx] == pins) {
|
|
dl_cfg_idx = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hweight8(dl_cfg[dl_cfg_idx].mask[tx]) < pins) {
|
|
dev_err(cpu_dai->dev, "channel not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
bclk = params_rate(params) * (sai->bclk_ratio ? sai->bclk_ratio : slots * slot_width);
|
|
|
|
if (!IS_ERR_OR_NULL(sai->pinctrl)) {
|
|
sai->pins_state = fsl_sai_get_pins_state(sai, bclk);
|
|
if (!IS_ERR_OR_NULL(sai->pins_state)) {
|
|
ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
|
|
if (ret) {
|
|
dev_err(cpu_dai->dev, "failed to set proper pins state: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!sai->is_consumer_mode[tx]) {
|
|
ret = fsl_sai_set_bclk(cpu_dai, tx, bclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Do not enable the clock if it is already enabled */
|
|
if (!(sai->mclk_streams & BIT(substream->stream))) {
|
|
ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[tx]]);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sai->mclk_streams |= BIT(substream->stream);
|
|
}
|
|
}
|
|
|
|
if (!sai->is_dsp_mode && !sai->is_pdm_mode)
|
|
val_cr4 |= FSL_SAI_CR4_SYWD(slot_width);
|
|
|
|
val_cr5 |= FSL_SAI_CR5_WNW(slot_width);
|
|
val_cr5 |= FSL_SAI_CR5_W0W(slot_width);
|
|
|
|
if (sai->is_lsb_first || sai->is_pdm_mode)
|
|
val_cr5 |= FSL_SAI_CR5_FBT(0);
|
|
else
|
|
val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
|
|
|
|
val_cr4 |= FSL_SAI_CR4_FRSZ(slots);
|
|
|
|
/* Set to output mode to avoid tri-stated data pins */
|
|
if (tx)
|
|
val_cr4 |= FSL_SAI_CR4_CHMOD;
|
|
|
|
/*
|
|
* For SAI provider mode, when Tx(Rx) sync with Rx(Tx) clock, Rx(Tx) will
|
|
* generate bclk and frame clock for Tx(Rx), we should set RCR4(TCR4),
|
|
* RCR5(TCR5) for playback(capture), or there will be sync error.
|
|
*/
|
|
|
|
if (!sai->is_consumer_mode[tx] && fsl_sai_dir_is_synced(sai, adir)) {
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(!tx, ofs),
|
|
FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
|
|
FSL_SAI_CR4_CHMOD_MASK,
|
|
val_cr4);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR5(!tx, ofs),
|
|
FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
|
|
FSL_SAI_CR5_FBT_MASK, val_cr5);
|
|
}
|
|
|
|
/*
|
|
* Combine mode has limation:
|
|
* - Can't used for singel dataline/FIFO case except the FIFO0
|
|
* - Can't used for multi dataline/FIFO case except the enabled FIFOs
|
|
* are successive and start from FIFO0
|
|
*
|
|
* So for common usage, all multi fifo case disable the combine mode.
|
|
*/
|
|
if (hweight8(dl_cfg[dl_cfg_idx].mask[tx]) <= 1 || sai->is_multi_fifo_dma)
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_FCOMB_MASK, 0);
|
|
else
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_FCOMB_MASK, FSL_SAI_CR4_FCOMB_SOFT);
|
|
|
|
dma_params = tx ? &sai->dma_params_tx : &sai->dma_params_rx;
|
|
dma_params->addr = sai->res->start + FSL_SAI_xDR0(tx) +
|
|
dl_cfg[dl_cfg_idx].start_off[tx] * 0x4;
|
|
|
|
if (sai->is_multi_fifo_dma) {
|
|
sai->audio_config[tx].words_per_fifo = min(slots, channels);
|
|
if (tx) {
|
|
sai->audio_config[tx].n_fifos_dst = pins;
|
|
sai->audio_config[tx].stride_fifos_dst = dl_cfg[dl_cfg_idx].next_off[tx];
|
|
} else {
|
|
sai->audio_config[tx].n_fifos_src = pins;
|
|
sai->audio_config[tx].stride_fifos_src = dl_cfg[dl_cfg_idx].next_off[tx];
|
|
}
|
|
dma_params->maxburst = sai->audio_config[tx].words_per_fifo * pins;
|
|
dma_params->peripheral_config = &sai->audio_config[tx];
|
|
dma_params->peripheral_size = sizeof(sai->audio_config[tx]);
|
|
|
|
watermark = tx ? (sai->soc_data->fifo_depth - dma_params->maxburst) :
|
|
(dma_params->maxburst - 1);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR1(tx, ofs),
|
|
FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
|
|
watermark);
|
|
}
|
|
|
|
/* Find a proper tcre setting */
|
|
for (i = 0; i < sai->soc_data->pins; i++) {
|
|
trce_mask = (1 << (i + 1)) - 1;
|
|
if (hweight8(dl_cfg[dl_cfg_idx].mask[tx] & trce_mask) == pins)
|
|
break;
|
|
}
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
|
|
FSL_SAI_CR3_TRCE_MASK,
|
|
FSL_SAI_CR3_TRCE((dl_cfg[dl_cfg_idx].mask[tx] & trce_mask)));
|
|
|
|
/*
|
|
* When the TERE and FSD_MSTR enabled before configuring the word width
|
|
* There will be no frame sync clock issue, because word width impact
|
|
* the generation of frame sync clock.
|
|
*
|
|
* TERE enabled earlier only for i.MX8MP case for the hardware limitation,
|
|
* We need to disable FSD_MSTR before configuring word width, then enable
|
|
* FSD_MSTR bit for this specific case.
|
|
*/
|
|
if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output &&
|
|
!sai->is_consumer_mode[tx])
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_FSD_MSTR, 0);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK |
|
|
FSL_SAI_CR4_CHMOD_MASK,
|
|
val_cr4);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR5(tx, ofs),
|
|
FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
|
|
FSL_SAI_CR5_FBT_MASK, val_cr5);
|
|
|
|
/* Enable FSD_MSTR after configuring word width */
|
|
if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output &&
|
|
!sai->is_consumer_mode[tx])
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs),
|
|
FSL_SAI_CR4_FSD_MSTR, FSL_SAI_CR4_FSD_MSTR);
|
|
|
|
regmap_write(sai->regmap, FSL_SAI_xMR(tx),
|
|
~0UL - ((1 << min(channels, slots)) - 1));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_hw_free(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
/* Clear xMR to avoid channel swap with mclk_with_tere enabled case */
|
|
regmap_write(sai->regmap, FSL_SAI_xMR(tx), 0);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs),
|
|
FSL_SAI_CR3_TRCE_MASK, 0);
|
|
|
|
if (!sai->is_consumer_mode[tx] &&
|
|
sai->mclk_streams & BIT(substream->stream)) {
|
|
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]);
|
|
sai->mclk_streams &= ~BIT(substream->stream);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_sai_config_disable(struct fsl_sai *sai, int dir)
|
|
{
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
bool tx = dir == TX;
|
|
u32 xcsr, count = 100, mask;
|
|
|
|
if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output)
|
|
mask = FSL_SAI_CSR_TERE;
|
|
else
|
|
mask = FSL_SAI_CSR_TERE | FSL_SAI_CSR_BCE;
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
mask, 0);
|
|
|
|
/* TERE will remain set till the end of current frame */
|
|
do {
|
|
udelay(10);
|
|
regmap_read(sai->regmap, FSL_SAI_xCSR(tx, ofs), &xcsr);
|
|
} while (--count && xcsr & FSL_SAI_CSR_TERE);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
|
|
|
|
/*
|
|
* For sai master mode, after several open/close sai,
|
|
* there will be no frame clock, and can't recover
|
|
* anymore. Add software reset to fix this issue.
|
|
* This is a hardware bug, and will be fix in the
|
|
* next sai version.
|
|
*/
|
|
if (!sai->is_consumer_mode[tx]) {
|
|
/* Software Reset */
|
|
regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
|
|
/* Clear SR bit to finish the reset */
|
|
regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
|
|
}
|
|
}
|
|
|
|
static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
int adir = tx ? RX : TX;
|
|
int dir = tx ? TX : RX;
|
|
u32 xcsr;
|
|
|
|
/*
|
|
* Asynchronous mode: Clear SYNC for both Tx and Rx.
|
|
* Rx sync with Tx clocks: Clear SYNC for Tx, set it for Rx.
|
|
* Tx sync with Rx clocks: Clear SYNC for Rx, set it for Tx.
|
|
*/
|
|
regmap_update_bits(sai->regmap, FSL_SAI_TCR2(ofs), FSL_SAI_CR2_SYNC,
|
|
sai->synchronous[TX] ? FSL_SAI_CR2_SYNC : 0);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_RCR2(ofs), FSL_SAI_CR2_SYNC,
|
|
sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
|
|
|
|
/*
|
|
* It is recommended that the transmitter is the last enabled
|
|
* and the first disabled.
|
|
*/
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
|
|
/*
|
|
* Enable the opposite direction for synchronous mode
|
|
* 1. Tx sync with Rx: only set RE for Rx; set TE & RE for Tx
|
|
* 2. Rx sync with Tx: only set TE for Tx; set RE & TE for Rx
|
|
*
|
|
* RM recommends to enable RE after TE for case 1 and to enable
|
|
* TE after RE for case 2, but we here may not always guarantee
|
|
* that happens: "arecord 1.wav; aplay 2.wav" in case 1 enables
|
|
* TE after RE, which is against what RM recommends but should
|
|
* be safe to do, judging by years of testing results.
|
|
*/
|
|
if (fsl_sai_dir_is_synced(sai, adir))
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR((!tx), ofs),
|
|
FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_FRDE, 0);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
|
|
FSL_SAI_CSR_xIE_MASK, 0);
|
|
|
|
/* Check if the opposite FRDE is also disabled */
|
|
regmap_read(sai->regmap, FSL_SAI_xCSR(!tx, ofs), &xcsr);
|
|
|
|
/*
|
|
* If opposite stream provides clocks for synchronous mode and
|
|
* it is inactive, disable it before disabling the current one
|
|
*/
|
|
if (fsl_sai_dir_is_synced(sai, adir) && !(xcsr & FSL_SAI_CSR_FRDE))
|
|
fsl_sai_config_disable(sai, adir);
|
|
|
|
/*
|
|
* Disable current stream if either of:
|
|
* 1. current stream doesn't provide clocks for synchronous mode
|
|
* 2. current stream provides clocks for synchronous mode but no
|
|
* more stream is active.
|
|
*/
|
|
if (!fsl_sai_dir_is_synced(sai, dir) || !(xcsr & FSL_SAI_CSR_FRDE))
|
|
fsl_sai_config_disable(sai, dir);
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
|
|
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
|
|
int ret;
|
|
|
|
/*
|
|
* EDMA controller needs period size to be a multiple of
|
|
* tx/rx maxburst
|
|
*/
|
|
if (sai->soc_data->use_edma)
|
|
snd_pcm_hw_constraint_step(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
|
|
tx ? sai->dma_params_tx.maxburst :
|
|
sai->dma_params_rx.maxburst);
|
|
|
|
ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
/* Software Reset for both Tx and Rx */
|
|
regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), FSL_SAI_CSR_SR);
|
|
regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), FSL_SAI_CSR_SR);
|
|
/* Clear SR bit to finish the reset */
|
|
regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
|
|
regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
|
|
|
|
regmap_update_bits(sai->regmap, FSL_SAI_TCR1(ofs),
|
|
FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
|
|
sai->soc_data->fifo_depth - sai->dma_params_tx.maxburst);
|
|
regmap_update_bits(sai->regmap, FSL_SAI_RCR1(ofs),
|
|
FSL_SAI_CR1_RFW_MASK(sai->soc_data->fifo_depth),
|
|
sai->dma_params_rx.maxburst - 1);
|
|
|
|
snd_soc_dai_init_dma_data(cpu_dai, &sai->dma_params_tx,
|
|
&sai->dma_params_rx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
|
|
.probe = fsl_sai_dai_probe,
|
|
.set_bclk_ratio = fsl_sai_set_dai_bclk_ratio,
|
|
.set_sysclk = fsl_sai_set_dai_sysclk,
|
|
.set_fmt = fsl_sai_set_dai_fmt,
|
|
.set_tdm_slot = fsl_sai_set_dai_tdm_slot,
|
|
.hw_params = fsl_sai_hw_params,
|
|
.hw_free = fsl_sai_hw_free,
|
|
.trigger = fsl_sai_trigger,
|
|
.startup = fsl_sai_startup,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_tx_ops = {
|
|
.probe = fsl_sai_dai_probe,
|
|
.set_bclk_ratio = fsl_sai_set_dai_bclk_ratio,
|
|
.set_sysclk = fsl_sai_set_dai_sysclk,
|
|
.set_fmt = fsl_sai_set_dai_fmt_tx,
|
|
.set_tdm_slot = fsl_sai_set_dai_tdm_slot,
|
|
.hw_params = fsl_sai_hw_params,
|
|
.hw_free = fsl_sai_hw_free,
|
|
.trigger = fsl_sai_trigger,
|
|
.startup = fsl_sai_startup,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops fsl_sai_pcm_dai_rx_ops = {
|
|
.probe = fsl_sai_dai_probe,
|
|
.set_bclk_ratio = fsl_sai_set_dai_bclk_ratio,
|
|
.set_sysclk = fsl_sai_set_dai_sysclk,
|
|
.set_fmt = fsl_sai_set_dai_fmt_rx,
|
|
.set_tdm_slot = fsl_sai_set_dai_tdm_slot,
|
|
.hw_params = fsl_sai_hw_params,
|
|
.hw_free = fsl_sai_hw_free,
|
|
.trigger = fsl_sai_trigger,
|
|
.startup = fsl_sai_startup,
|
|
};
|
|
|
|
static int fsl_sai_dai_resume(struct snd_soc_component *component)
|
|
{
|
|
struct fsl_sai *sai = snd_soc_component_get_drvdata(component);
|
|
struct device *dev = &sai->pdev->dev;
|
|
int ret;
|
|
|
|
if (!IS_ERR_OR_NULL(sai->pinctrl) && !IS_ERR_OR_NULL(sai->pins_state)) {
|
|
ret = pinctrl_select_state(sai->pinctrl, sai->pins_state);
|
|
if (ret) {
|
|
dev_err(dev, "failed to set proper pins state: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver fsl_sai_dai_template[] = {
|
|
{
|
|
.name = "sai-tx-rx",
|
|
.playback = {
|
|
.stream_name = "CPU-Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rate_min = 8000,
|
|
.rate_max = 2822400,
|
|
.rates = SNDRV_PCM_RATE_KNOT,
|
|
.formats = FSL_SAI_FORMATS,
|
|
},
|
|
.capture = {
|
|
.stream_name = "CPU-Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rate_min = 8000,
|
|
.rate_max = 2822400,
|
|
.rates = SNDRV_PCM_RATE_KNOT,
|
|
.formats = FSL_SAI_FORMATS,
|
|
},
|
|
.ops = &fsl_sai_pcm_dai_ops,
|
|
},
|
|
{
|
|
.name = "sai-tx",
|
|
.playback = {
|
|
.stream_name = "CPU-Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rate_min = 8000,
|
|
.rate_max = 2822400,
|
|
.rates = SNDRV_PCM_RATE_KNOT,
|
|
.formats = FSL_SAI_FORMATS,
|
|
},
|
|
.ops = &fsl_sai_pcm_dai_tx_ops,
|
|
},
|
|
{
|
|
.name = "sai-rx",
|
|
.capture = {
|
|
.stream_name = "CPU-Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 32,
|
|
.rate_min = 8000,
|
|
.rate_max = 2822400,
|
|
.rates = SNDRV_PCM_RATE_KNOT,
|
|
.formats = FSL_SAI_FORMATS,
|
|
},
|
|
.ops = &fsl_sai_pcm_dai_rx_ops,
|
|
},
|
|
};
|
|
|
|
static const struct snd_soc_component_driver fsl_component = {
|
|
.name = "fsl-sai",
|
|
.resume = fsl_sai_dai_resume,
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
static struct reg_default fsl_sai_reg_defaults_ofs0[] = {
|
|
{FSL_SAI_TCR1(0), 0},
|
|
{FSL_SAI_TCR2(0), 0},
|
|
{FSL_SAI_TCR3(0), 0},
|
|
{FSL_SAI_TCR4(0), 0},
|
|
{FSL_SAI_TCR5(0), 0},
|
|
{FSL_SAI_TDR0, 0},
|
|
{FSL_SAI_TDR1, 0},
|
|
{FSL_SAI_TDR2, 0},
|
|
{FSL_SAI_TDR3, 0},
|
|
{FSL_SAI_TDR4, 0},
|
|
{FSL_SAI_TDR5, 0},
|
|
{FSL_SAI_TDR6, 0},
|
|
{FSL_SAI_TDR7, 0},
|
|
{FSL_SAI_TMR, 0},
|
|
{FSL_SAI_RCR1(0), 0},
|
|
{FSL_SAI_RCR2(0), 0},
|
|
{FSL_SAI_RCR3(0), 0},
|
|
{FSL_SAI_RCR4(0), 0},
|
|
{FSL_SAI_RCR5(0), 0},
|
|
{FSL_SAI_RMR, 0},
|
|
};
|
|
|
|
static struct reg_default fsl_sai_reg_defaults_ofs8[] = {
|
|
{FSL_SAI_TCR1(8), 0},
|
|
{FSL_SAI_TCR2(8), 0},
|
|
{FSL_SAI_TCR3(8), 0},
|
|
{FSL_SAI_TCR4(8), 0},
|
|
{FSL_SAI_TCR5(8), 0},
|
|
{FSL_SAI_TDR0, 0},
|
|
{FSL_SAI_TDR1, 0},
|
|
{FSL_SAI_TDR2, 0},
|
|
{FSL_SAI_TDR3, 0},
|
|
{FSL_SAI_TDR4, 0},
|
|
{FSL_SAI_TDR5, 0},
|
|
{FSL_SAI_TDR6, 0},
|
|
{FSL_SAI_TDR7, 0},
|
|
{FSL_SAI_TMR, 0},
|
|
{FSL_SAI_RCR1(8), 0},
|
|
{FSL_SAI_RCR2(8), 0},
|
|
{FSL_SAI_RCR3(8), 0},
|
|
{FSL_SAI_RCR4(8), 0},
|
|
{FSL_SAI_RCR5(8), 0},
|
|
{FSL_SAI_RMR, 0},
|
|
{FSL_SAI_MCTL, 0},
|
|
{FSL_SAI_MDIV, 0},
|
|
};
|
|
|
|
static bool fsl_sai_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
if (reg >= FSL_SAI_TCSR(ofs) && reg <= FSL_SAI_TCR5(ofs))
|
|
return true;
|
|
|
|
if (reg >= FSL_SAI_RCSR(ofs) && reg <= FSL_SAI_RCR5(ofs))
|
|
return true;
|
|
|
|
switch (reg) {
|
|
case FSL_SAI_TFR0:
|
|
case FSL_SAI_TFR1:
|
|
case FSL_SAI_TFR2:
|
|
case FSL_SAI_TFR3:
|
|
case FSL_SAI_TFR4:
|
|
case FSL_SAI_TFR5:
|
|
case FSL_SAI_TFR6:
|
|
case FSL_SAI_TFR7:
|
|
case FSL_SAI_TMR:
|
|
case FSL_SAI_RDR0:
|
|
case FSL_SAI_RDR1:
|
|
case FSL_SAI_RDR2:
|
|
case FSL_SAI_RDR3:
|
|
case FSL_SAI_RDR4:
|
|
case FSL_SAI_RDR5:
|
|
case FSL_SAI_RDR6:
|
|
case FSL_SAI_RDR7:
|
|
case FSL_SAI_RFR0:
|
|
case FSL_SAI_RFR1:
|
|
case FSL_SAI_RFR2:
|
|
case FSL_SAI_RFR3:
|
|
case FSL_SAI_RFR4:
|
|
case FSL_SAI_RFR5:
|
|
case FSL_SAI_RFR6:
|
|
case FSL_SAI_RFR7:
|
|
case FSL_SAI_RMR:
|
|
case FSL_SAI_MCTL:
|
|
case FSL_SAI_MDIV:
|
|
case FSL_SAI_VERID:
|
|
case FSL_SAI_PARAM:
|
|
case FSL_SAI_TTCTN:
|
|
case FSL_SAI_RTCTN:
|
|
case FSL_SAI_TTCTL:
|
|
case FSL_SAI_TBCTN:
|
|
case FSL_SAI_TTCAP:
|
|
case FSL_SAI_RTCTL:
|
|
case FSL_SAI_RBCTN:
|
|
case FSL_SAI_RTCAP:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_sai_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
if (reg == FSL_SAI_TCSR(ofs) || reg == FSL_SAI_RCSR(ofs))
|
|
return true;
|
|
|
|
/* Set VERID and PARAM be volatile for reading value in probe */
|
|
if (ofs == 8 && (reg == FSL_SAI_VERID || reg == FSL_SAI_PARAM))
|
|
return true;
|
|
|
|
switch (reg) {
|
|
case FSL_SAI_TFR0:
|
|
case FSL_SAI_TFR1:
|
|
case FSL_SAI_TFR2:
|
|
case FSL_SAI_TFR3:
|
|
case FSL_SAI_TFR4:
|
|
case FSL_SAI_TFR5:
|
|
case FSL_SAI_TFR6:
|
|
case FSL_SAI_TFR7:
|
|
case FSL_SAI_RFR0:
|
|
case FSL_SAI_RFR1:
|
|
case FSL_SAI_RFR2:
|
|
case FSL_SAI_RFR3:
|
|
case FSL_SAI_RFR4:
|
|
case FSL_SAI_RFR5:
|
|
case FSL_SAI_RFR6:
|
|
case FSL_SAI_RFR7:
|
|
case FSL_SAI_RDR0:
|
|
case FSL_SAI_RDR1:
|
|
case FSL_SAI_RDR2:
|
|
case FSL_SAI_RDR3:
|
|
case FSL_SAI_RDR4:
|
|
case FSL_SAI_RDR5:
|
|
case FSL_SAI_RDR6:
|
|
case FSL_SAI_RDR7:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool fsl_sai_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
|
|
if (reg >= FSL_SAI_TCSR(ofs) && reg <= FSL_SAI_TCR5(ofs))
|
|
return true;
|
|
|
|
if (reg >= FSL_SAI_RCSR(ofs) && reg <= FSL_SAI_RCR5(ofs))
|
|
return true;
|
|
|
|
switch (reg) {
|
|
case FSL_SAI_TDR0:
|
|
case FSL_SAI_TDR1:
|
|
case FSL_SAI_TDR2:
|
|
case FSL_SAI_TDR3:
|
|
case FSL_SAI_TDR4:
|
|
case FSL_SAI_TDR5:
|
|
case FSL_SAI_TDR6:
|
|
case FSL_SAI_TDR7:
|
|
case FSL_SAI_TMR:
|
|
case FSL_SAI_RMR:
|
|
case FSL_SAI_MCTL:
|
|
case FSL_SAI_MDIV:
|
|
case FSL_SAI_TTCTL:
|
|
case FSL_SAI_RTCTL:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static struct regmap_config fsl_sai_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.fast_io = true,
|
|
|
|
.max_register = FSL_SAI_RMR,
|
|
.reg_defaults = fsl_sai_reg_defaults_ofs0,
|
|
.num_reg_defaults = ARRAY_SIZE(fsl_sai_reg_defaults_ofs0),
|
|
.readable_reg = fsl_sai_readable_reg,
|
|
.volatile_reg = fsl_sai_volatile_reg,
|
|
.writeable_reg = fsl_sai_writeable_reg,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static int fsl_sai_check_version(struct device *dev)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
unsigned char ofs = sai->soc_data->reg_offset;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (FSL_SAI_TCSR(ofs) == FSL_SAI_VERID)
|
|
return 0;
|
|
|
|
ret = regmap_read(sai->regmap, FSL_SAI_VERID, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(dev, "VERID: 0x%016X\n", val);
|
|
|
|
sai->verid.version = val &
|
|
(FSL_SAI_VERID_MAJOR_MASK | FSL_SAI_VERID_MINOR_MASK);
|
|
sai->verid.version >>= FSL_SAI_VERID_MINOR_SHIFT;
|
|
sai->verid.feature = val & FSL_SAI_VERID_FEATURE_MASK;
|
|
|
|
ret = regmap_read(sai->regmap, FSL_SAI_PARAM, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(dev, "PARAM: 0x%016X\n", val);
|
|
|
|
/* Max slots per frame, power of 2 */
|
|
sai->param.slot_num = 1 <<
|
|
((val & FSL_SAI_PARAM_SPF_MASK) >> FSL_SAI_PARAM_SPF_SHIFT);
|
|
|
|
/* Words per fifo, power of 2 */
|
|
sai->param.fifo_depth = 1 <<
|
|
((val & FSL_SAI_PARAM_WPF_MASK) >> FSL_SAI_PARAM_WPF_SHIFT);
|
|
|
|
/* Number of datalines implemented */
|
|
sai->param.dataline = val & FSL_SAI_PARAM_DLN_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Calculate the offset between first two datalines, don't
|
|
* different offset in one case.
|
|
*/
|
|
static unsigned int fsl_sai_calc_dl_off(unsigned long dl_mask)
|
|
{
|
|
int fbidx, nbidx, offset;
|
|
|
|
fbidx = find_first_bit(&dl_mask, FSL_SAI_DL_NUM);
|
|
nbidx = find_next_bit(&dl_mask, FSL_SAI_DL_NUM, fbidx + 1);
|
|
offset = nbidx - fbidx - 1;
|
|
|
|
return (offset < 0 || offset >= (FSL_SAI_DL_NUM - 1) ? 0 : offset);
|
|
}
|
|
|
|
/*
|
|
* read the fsl,dataline property from dts file.
|
|
* It has 3 value for each configuration, first one means the type:
|
|
* I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is
|
|
* dataline mask for 'tx'. for example
|
|
*
|
|
* fsl,dataline = <1 0xff 0xff 2 0xff 0x11>,
|
|
*
|
|
* It means I2S type rx mask is 0xff, tx mask is 0xff, PDM type
|
|
* rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled).
|
|
*
|
|
*/
|
|
static int fsl_sai_read_dlcfg(struct fsl_sai *sai)
|
|
{
|
|
struct platform_device *pdev = sai->pdev;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
int ret, elems, i, index, num_cfg;
|
|
char *propname = "fsl,dataline";
|
|
struct fsl_sai_dl_cfg *cfg;
|
|
unsigned long dl_mask;
|
|
unsigned int soc_dl;
|
|
u32 rx, tx, type;
|
|
|
|
elems = of_property_count_u32_elems(np, propname);
|
|
|
|
if (elems <= 0) {
|
|
elems = 0;
|
|
} else if (elems % 3) {
|
|
dev_err(dev, "Number of elements must be divisible to 3.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
num_cfg = elems / 3;
|
|
/* Add one more for default value */
|
|
cfg = devm_kzalloc(&pdev->dev, (num_cfg + 1) * sizeof(*cfg), GFP_KERNEL);
|
|
if (!cfg)
|
|
return -ENOMEM;
|
|
|
|
/* Consider default value "0 0xFF 0xFF" if property is missing */
|
|
soc_dl = BIT(sai->soc_data->pins) - 1;
|
|
cfg[0].type = FSL_SAI_DL_DEFAULT;
|
|
cfg[0].pins[0] = sai->soc_data->pins;
|
|
cfg[0].mask[0] = soc_dl;
|
|
cfg[0].start_off[0] = 0;
|
|
cfg[0].next_off[0] = 0;
|
|
|
|
cfg[0].pins[1] = sai->soc_data->pins;
|
|
cfg[0].mask[1] = soc_dl;
|
|
cfg[0].start_off[1] = 0;
|
|
cfg[0].next_off[1] = 0;
|
|
for (i = 1, index = 0; i < num_cfg + 1; i++) {
|
|
/*
|
|
* type of dataline
|
|
* 0 means default mode
|
|
* 1 means I2S mode
|
|
* 2 means PDM mode
|
|
*/
|
|
ret = of_property_read_u32_index(np, propname, index++, &type);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret = of_property_read_u32_index(np, propname, index++, &rx);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret = of_property_read_u32_index(np, propname, index++, &tx);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if ((rx & ~soc_dl) || (tx & ~soc_dl)) {
|
|
dev_err(dev, "dataline cfg[%d] setting error, mask is 0x%x\n", i, soc_dl);
|
|
return -EINVAL;
|
|
}
|
|
|
|
rx = rx & soc_dl;
|
|
tx = tx & soc_dl;
|
|
|
|
cfg[i].type = type;
|
|
cfg[i].pins[0] = hweight8(rx);
|
|
cfg[i].mask[0] = rx;
|
|
dl_mask = rx;
|
|
cfg[i].start_off[0] = find_first_bit(&dl_mask, FSL_SAI_DL_NUM);
|
|
cfg[i].next_off[0] = fsl_sai_calc_dl_off(rx);
|
|
|
|
cfg[i].pins[1] = hweight8(tx);
|
|
cfg[i].mask[1] = tx;
|
|
dl_mask = tx;
|
|
cfg[i].start_off[1] = find_first_bit(&dl_mask, FSL_SAI_DL_NUM);
|
|
cfg[i].next_off[1] = fsl_sai_calc_dl_off(tx);
|
|
}
|
|
|
|
sai->dl_cfg = cfg;
|
|
sai->dl_cfg_cnt = num_cfg + 1;
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_runtime_suspend(struct device *dev);
|
|
static int fsl_sai_runtime_resume(struct device *dev);
|
|
|
|
static int fsl_sai_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct fsl_sai *sai;
|
|
struct regmap *gpr;
|
|
void __iomem *base;
|
|
char tmp[8];
|
|
int irq, ret, i;
|
|
int index;
|
|
u32 dmas[4];
|
|
|
|
sai = devm_kzalloc(dev, sizeof(*sai), GFP_KERNEL);
|
|
if (!sai)
|
|
return -ENOMEM;
|
|
|
|
sai->pdev = pdev;
|
|
sai->soc_data = of_device_get_match_data(dev);
|
|
|
|
sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
|
|
|
|
base = devm_platform_get_and_ioremap_resource(pdev, 0, &sai->res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
if (sai->soc_data->reg_offset == 8) {
|
|
fsl_sai_regmap_config.reg_defaults = fsl_sai_reg_defaults_ofs8;
|
|
fsl_sai_regmap_config.max_register = FSL_SAI_MDIV;
|
|
fsl_sai_regmap_config.num_reg_defaults =
|
|
ARRAY_SIZE(fsl_sai_reg_defaults_ofs8);
|
|
}
|
|
|
|
sai->regmap = devm_regmap_init_mmio(dev, base, &fsl_sai_regmap_config);
|
|
if (IS_ERR(sai->regmap)) {
|
|
dev_err(dev, "regmap init failed\n");
|
|
return PTR_ERR(sai->regmap);
|
|
}
|
|
|
|
sai->bus_clk = devm_clk_get(dev, "bus");
|
|
/* Compatible with old DTB cases */
|
|
if (IS_ERR(sai->bus_clk) && PTR_ERR(sai->bus_clk) != -EPROBE_DEFER)
|
|
sai->bus_clk = devm_clk_get(dev, "sai");
|
|
if (IS_ERR(sai->bus_clk)) {
|
|
dev_err(dev, "failed to get bus clock: %ld\n",
|
|
PTR_ERR(sai->bus_clk));
|
|
/* -EPROBE_DEFER */
|
|
return PTR_ERR(sai->bus_clk);
|
|
}
|
|
|
|
for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
|
|
sprintf(tmp, "mclk%d", i);
|
|
sai->mclk_clk[i] = devm_clk_get(dev, tmp);
|
|
if (IS_ERR(sai->mclk_clk[i])) {
|
|
dev_err(dev, "failed to get mclk%d clock: %ld\n",
|
|
i, PTR_ERR(sai->mclk_clk[i]));
|
|
sai->mclk_clk[i] = NULL;
|
|
}
|
|
}
|
|
|
|
if (sai->soc_data->mclk0_is_mclk1)
|
|
sai->mclk_clk[0] = sai->mclk_clk[1];
|
|
else
|
|
sai->mclk_clk[0] = sai->bus_clk;
|
|
|
|
fsl_asoc_get_pll_clocks(&pdev->dev, &sai->pll8k_clk,
|
|
&sai->pll11k_clk);
|
|
|
|
/* Use Multi FIFO mode depending on the support from SDMA script */
|
|
ret = of_property_read_u32_array(np, "dmas", dmas, 4);
|
|
if (!sai->soc_data->use_edma && !ret && dmas[2] == IMX_DMATYPE_MULTI_SAI)
|
|
sai->is_multi_fifo_dma = true;
|
|
|
|
/* read dataline mask for rx and tx*/
|
|
ret = fsl_sai_read_dlcfg(sai);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to read dlcfg %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_irq(dev, irq, fsl_sai_isr, IRQF_SHARED,
|
|
np->name, sai);
|
|
if (ret) {
|
|
dev_err(dev, "failed to claim irq %u\n", irq);
|
|
return ret;
|
|
}
|
|
|
|
memcpy(&sai->cpu_dai_drv, fsl_sai_dai_template,
|
|
sizeof(*fsl_sai_dai_template) * ARRAY_SIZE(fsl_sai_dai_template));
|
|
|
|
/* Sync Tx with Rx as default by following old DT binding */
|
|
sai->synchronous[RX] = true;
|
|
sai->synchronous[TX] = false;
|
|
sai->cpu_dai_drv[0].symmetric_rate = 1;
|
|
sai->cpu_dai_drv[0].symmetric_channels = 1;
|
|
sai->cpu_dai_drv[0].symmetric_sample_bits = 1;
|
|
|
|
if (of_property_read_bool(np, "fsl,sai-synchronous-rx") &&
|
|
of_property_read_bool(np, "fsl,sai-asynchronous")) {
|
|
/* error out if both synchronous and asynchronous are present */
|
|
dev_err(dev, "invalid binding for synchronous mode\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_bool(np, "fsl,sai-synchronous-rx")) {
|
|
/* Sync Rx with Tx */
|
|
sai->synchronous[RX] = false;
|
|
sai->synchronous[TX] = true;
|
|
} else if (of_property_read_bool(np, "fsl,sai-asynchronous")) {
|
|
/* Discard all settings for asynchronous mode */
|
|
sai->synchronous[RX] = false;
|
|
sai->synchronous[TX] = false;
|
|
sai->cpu_dai_drv[0].symmetric_rate = 0;
|
|
sai->cpu_dai_drv[0].symmetric_channels = 0;
|
|
sai->cpu_dai_drv[0].symmetric_sample_bits = 0;
|
|
}
|
|
|
|
sai->mclk_direction_output = of_property_read_bool(np, "fsl,sai-mclk-direction-output");
|
|
|
|
if (sai->mclk_direction_output &&
|
|
of_device_is_compatible(np, "fsl,imx6ul-sai")) {
|
|
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
|
|
if (IS_ERR(gpr)) {
|
|
dev_err(dev, "cannot find iomuxc registers\n");
|
|
return PTR_ERR(gpr);
|
|
}
|
|
|
|
index = of_alias_get_id(np, "sai");
|
|
if (index < 0)
|
|
return index;
|
|
|
|
regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index),
|
|
MCLK_DIR(index));
|
|
}
|
|
|
|
sai->dma_params_rx.addr = sai->res->start + FSL_SAI_RDR0;
|
|
sai->dma_params_tx.addr = sai->res->start + FSL_SAI_TDR0;
|
|
sai->dma_params_rx.maxburst =
|
|
sai->soc_data->max_burst[RX] ? sai->soc_data->max_burst[RX] : FSL_SAI_MAXBURST_RX;
|
|
sai->dma_params_tx.maxburst =
|
|
sai->soc_data->max_burst[TX] ? sai->soc_data->max_burst[TX] : FSL_SAI_MAXBURST_TX;
|
|
|
|
sai->pinctrl = devm_pinctrl_get(&pdev->dev);
|
|
|
|
platform_set_drvdata(pdev, sai);
|
|
pm_runtime_enable(dev);
|
|
if (!pm_runtime_enabled(dev)) {
|
|
ret = fsl_sai_runtime_resume(dev);
|
|
if (ret)
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
ret = pm_runtime_resume_and_get(dev);
|
|
if (ret < 0)
|
|
goto err_pm_get_sync;
|
|
|
|
/* Get sai version */
|
|
ret = fsl_sai_check_version(dev);
|
|
if (ret < 0)
|
|
dev_warn(dev, "Error reading SAI version: %d\n", ret);
|
|
|
|
/* Select MCLK direction */
|
|
if (sai->mclk_direction_output &&
|
|
sai->soc_data->max_register >= FSL_SAI_MCTL) {
|
|
regmap_update_bits(sai->regmap, FSL_SAI_MCTL,
|
|
FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
|
|
}
|
|
|
|
ret = pm_runtime_put_sync(dev);
|
|
if (ret < 0 && ret != -ENOSYS)
|
|
goto err_pm_get_sync;
|
|
|
|
/*
|
|
* Register platform component before registering cpu dai for there
|
|
* is not defer probe for platform component in snd_soc_add_pcm_runtime().
|
|
*/
|
|
if (sai->soc_data->use_imx_pcm) {
|
|
ret = imx_pcm_dma_init(pdev);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret, "PCM DMA init failed\n");
|
|
if (!IS_ENABLED(CONFIG_SND_SOC_IMX_PCM_DMA))
|
|
dev_err(dev, "Error: You must enable the imx-pcm-dma support!\n");
|
|
goto err_pm_get_sync;
|
|
}
|
|
} else {
|
|
ret = devm_snd_dmaengine_pcm_register(dev, NULL, 0);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret, "Registering PCM dmaengine failed\n");
|
|
goto err_pm_get_sync;
|
|
}
|
|
}
|
|
|
|
ret = devm_snd_soc_register_component(dev, &fsl_component,
|
|
sai->cpu_dai_drv, ARRAY_SIZE(fsl_sai_dai_template));
|
|
if (ret)
|
|
goto err_pm_get_sync;
|
|
|
|
return ret;
|
|
|
|
err_pm_get_sync:
|
|
if (!pm_runtime_status_suspended(dev))
|
|
fsl_sai_runtime_suspend(dev);
|
|
err_pm_disable:
|
|
pm_runtime_disable(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void fsl_sai_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
if (!pm_runtime_status_suspended(&pdev->dev))
|
|
fsl_sai_runtime_suspend(&pdev->dev);
|
|
}
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
|
|
.use_imx_pcm = false,
|
|
.use_edma = false,
|
|
.fifo_depth = 32,
|
|
.pins = 1,
|
|
.reg_offset = 0,
|
|
.mclk0_is_mclk1 = false,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_RMR,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 32,
|
|
.pins = 1,
|
|
.reg_offset = 0,
|
|
.mclk0_is_mclk1 = true,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_RMR,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 16,
|
|
.pins = 2,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.flags = PMQOS_CPU_LATENCY,
|
|
.max_register = FSL_SAI_RMR,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 128,
|
|
.pins = 8,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_RMR,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = true,
|
|
.fifo_depth = 64,
|
|
.pins = 4,
|
|
.reg_offset = 0,
|
|
.mclk0_is_mclk1 = false,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_RMR,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8mm_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 128,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 8,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_MCTL,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8mn_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 128,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 8,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_MDIV,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8mp_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = false,
|
|
.fifo_depth = 128,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 8,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_MDIV,
|
|
.mclk_with_tere = true,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx8ulp_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = true,
|
|
.fifo_depth = 16,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 4,
|
|
.flags = PMQOS_CPU_LATENCY,
|
|
.max_register = FSL_SAI_RTCAP,
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx93_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = true,
|
|
.fifo_depth = 128,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 4,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_MCTL,
|
|
.max_burst = {8, 8},
|
|
};
|
|
|
|
static const struct fsl_sai_soc_data fsl_sai_imx95_data = {
|
|
.use_imx_pcm = true,
|
|
.use_edma = true,
|
|
.fifo_depth = 128,
|
|
.reg_offset = 8,
|
|
.mclk0_is_mclk1 = false,
|
|
.pins = 8,
|
|
.flags = 0,
|
|
.max_register = FSL_SAI_MCTL,
|
|
.max_burst = {8, 8},
|
|
};
|
|
|
|
static const struct of_device_id fsl_sai_ids[] = {
|
|
{ .compatible = "fsl,vf610-sai", .data = &fsl_sai_vf610_data },
|
|
{ .compatible = "fsl,imx6sx-sai", .data = &fsl_sai_imx6sx_data },
|
|
{ .compatible = "fsl,imx6ul-sai", .data = &fsl_sai_imx6sx_data },
|
|
{ .compatible = "fsl,imx7ulp-sai", .data = &fsl_sai_imx7ulp_data },
|
|
{ .compatible = "fsl,imx8mq-sai", .data = &fsl_sai_imx8mq_data },
|
|
{ .compatible = "fsl,imx8qm-sai", .data = &fsl_sai_imx8qm_data },
|
|
{ .compatible = "fsl,imx8mm-sai", .data = &fsl_sai_imx8mm_data },
|
|
{ .compatible = "fsl,imx8mp-sai", .data = &fsl_sai_imx8mp_data },
|
|
{ .compatible = "fsl,imx8ulp-sai", .data = &fsl_sai_imx8ulp_data },
|
|
{ .compatible = "fsl,imx8mn-sai", .data = &fsl_sai_imx8mn_data },
|
|
{ .compatible = "fsl,imx93-sai", .data = &fsl_sai_imx93_data },
|
|
{ .compatible = "fsl,imx95-sai", .data = &fsl_sai_imx95_data },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_sai_ids);
|
|
|
|
static int fsl_sai_runtime_suspend(struct device *dev)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
|
|
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
|
|
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
|
|
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
|
|
|
|
clk_disable_unprepare(sai->bus_clk);
|
|
|
|
if (sai->soc_data->flags & PMQOS_CPU_LATENCY)
|
|
cpu_latency_qos_remove_request(&sai->pm_qos_req);
|
|
|
|
regcache_cache_only(sai->regmap, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fsl_sai_runtime_resume(struct device *dev)
|
|
{
|
|
struct fsl_sai *sai = dev_get_drvdata(dev);
|
|
unsigned int ofs = sai->soc_data->reg_offset;
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(sai->bus_clk);
|
|
if (ret) {
|
|
dev_err(dev, "failed to enable bus clock: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
|
|
ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
|
|
if (ret)
|
|
goto disable_bus_clk;
|
|
}
|
|
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
|
|
ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
|
|
if (ret)
|
|
goto disable_tx_clk;
|
|
}
|
|
|
|
if (sai->soc_data->flags & PMQOS_CPU_LATENCY)
|
|
cpu_latency_qos_add_request(&sai->pm_qos_req, 0);
|
|
|
|
regcache_cache_only(sai->regmap, false);
|
|
regcache_mark_dirty(sai->regmap);
|
|
regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), FSL_SAI_CSR_SR);
|
|
regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), FSL_SAI_CSR_SR);
|
|
usleep_range(1000, 2000);
|
|
regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), 0);
|
|
regmap_write(sai->regmap, FSL_SAI_RCSR(ofs), 0);
|
|
|
|
ret = regcache_sync(sai->regmap);
|
|
if (ret)
|
|
goto disable_rx_clk;
|
|
|
|
if (sai->soc_data->mclk_with_tere && sai->mclk_direction_output)
|
|
regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
|
|
FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
|
|
|
|
return 0;
|
|
|
|
disable_rx_clk:
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE))
|
|
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[0]]);
|
|
disable_tx_clk:
|
|
if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK))
|
|
clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[1]]);
|
|
disable_bus_clk:
|
|
clk_disable_unprepare(sai->bus_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops fsl_sai_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(fsl_sai_runtime_suspend,
|
|
fsl_sai_runtime_resume, NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
|
pm_runtime_force_resume)
|
|
};
|
|
|
|
static struct platform_driver fsl_sai_driver = {
|
|
.probe = fsl_sai_probe,
|
|
.remove_new = fsl_sai_remove,
|
|
.driver = {
|
|
.name = "fsl-sai",
|
|
.pm = &fsl_sai_pm_ops,
|
|
.of_match_table = fsl_sai_ids,
|
|
},
|
|
};
|
|
module_platform_driver(fsl_sai_driver);
|
|
|
|
MODULE_DESCRIPTION("Freescale Soc SAI Interface");
|
|
MODULE_AUTHOR("Xiubo Li, <Li.Xiubo@freescale.com>");
|
|
MODULE_ALIAS("platform:fsl-sai");
|
|
MODULE_LICENSE("GPL");
|