mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
e67adb4e66
R-Car Gen2 SoCs have a different PHY which is not compatible with the older R-Car H1 (R8A7779) version. This adds OF/platform device id tables and PHY initialization callbacks for the following Gen2 SoCs: * R-Car H2: R8A7790; * R-Car M2: R8A7791. PHY initialization method is chosen based on the device id. Default PHY settings are applied for Gen2 SoCs, which should suit the Gen2 boards available. While at it, this also adds "sata-r8a7779" compatibility string for R8A7779 SATA, while keeping the old one for compatibility. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org>
1004 lines
26 KiB
C
1004 lines
26 KiB
C
/*
|
|
* Renesas R-Car SATA driver
|
|
*
|
|
* Author: Vladimir Barinov <source@cogentembedded.com>
|
|
* Copyright (C) 2013 Cogent Embedded, Inc.
|
|
* Copyright (C) 2013 Renesas Solutions Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
|
|
#define DRV_NAME "sata_rcar"
|
|
|
|
/* SH-Navi2G/ATAPI-ATA compatible task registers */
|
|
#define DATA_REG 0x100
|
|
#define SDEVCON_REG 0x138
|
|
|
|
/* SH-Navi2G/ATAPI module compatible control registers */
|
|
#define ATAPI_CONTROL1_REG 0x180
|
|
#define ATAPI_STATUS_REG 0x184
|
|
#define ATAPI_INT_ENABLE_REG 0x188
|
|
#define ATAPI_DTB_ADR_REG 0x198
|
|
#define ATAPI_DMA_START_ADR_REG 0x19C
|
|
#define ATAPI_DMA_TRANS_CNT_REG 0x1A0
|
|
#define ATAPI_CONTROL2_REG 0x1A4
|
|
#define ATAPI_SIG_ST_REG 0x1B0
|
|
#define ATAPI_BYTE_SWAP_REG 0x1BC
|
|
|
|
/* ATAPI control 1 register (ATAPI_CONTROL1) bits */
|
|
#define ATAPI_CONTROL1_ISM BIT(16)
|
|
#define ATAPI_CONTROL1_DTA32M BIT(11)
|
|
#define ATAPI_CONTROL1_RESET BIT(7)
|
|
#define ATAPI_CONTROL1_DESE BIT(3)
|
|
#define ATAPI_CONTROL1_RW BIT(2)
|
|
#define ATAPI_CONTROL1_STOP BIT(1)
|
|
#define ATAPI_CONTROL1_START BIT(0)
|
|
|
|
/* ATAPI status register (ATAPI_STATUS) bits */
|
|
#define ATAPI_STATUS_SATAINT BIT(11)
|
|
#define ATAPI_STATUS_DNEND BIT(6)
|
|
#define ATAPI_STATUS_DEVTRM BIT(5)
|
|
#define ATAPI_STATUS_DEVINT BIT(4)
|
|
#define ATAPI_STATUS_ERR BIT(2)
|
|
#define ATAPI_STATUS_NEND BIT(1)
|
|
#define ATAPI_STATUS_ACT BIT(0)
|
|
|
|
/* Interrupt enable register (ATAPI_INT_ENABLE) bits */
|
|
#define ATAPI_INT_ENABLE_SATAINT BIT(11)
|
|
#define ATAPI_INT_ENABLE_DNEND BIT(6)
|
|
#define ATAPI_INT_ENABLE_DEVTRM BIT(5)
|
|
#define ATAPI_INT_ENABLE_DEVINT BIT(4)
|
|
#define ATAPI_INT_ENABLE_ERR BIT(2)
|
|
#define ATAPI_INT_ENABLE_NEND BIT(1)
|
|
#define ATAPI_INT_ENABLE_ACT BIT(0)
|
|
|
|
/* Access control registers for physical layer control register */
|
|
#define SATAPHYADDR_REG 0x200
|
|
#define SATAPHYWDATA_REG 0x204
|
|
#define SATAPHYACCEN_REG 0x208
|
|
#define SATAPHYRESET_REG 0x20C
|
|
#define SATAPHYRDATA_REG 0x210
|
|
#define SATAPHYACK_REG 0x214
|
|
|
|
/* Physical layer control address command register (SATAPHYADDR) bits */
|
|
#define SATAPHYADDR_PHYRATEMODE BIT(10)
|
|
#define SATAPHYADDR_PHYCMD_READ BIT(9)
|
|
#define SATAPHYADDR_PHYCMD_WRITE BIT(8)
|
|
|
|
/* Physical layer control enable register (SATAPHYACCEN) bits */
|
|
#define SATAPHYACCEN_PHYLANE BIT(0)
|
|
|
|
/* Physical layer control reset register (SATAPHYRESET) bits */
|
|
#define SATAPHYRESET_PHYRST BIT(1)
|
|
#define SATAPHYRESET_PHYSRES BIT(0)
|
|
|
|
/* Physical layer control acknowledge register (SATAPHYACK) bits */
|
|
#define SATAPHYACK_PHYACK BIT(0)
|
|
|
|
/* Serial-ATA HOST control registers */
|
|
#define BISTCONF_REG 0x102C
|
|
#define SDATA_REG 0x1100
|
|
#define SSDEVCON_REG 0x1204
|
|
|
|
#define SCRSSTS_REG 0x1400
|
|
#define SCRSERR_REG 0x1404
|
|
#define SCRSCON_REG 0x1408
|
|
#define SCRSACT_REG 0x140C
|
|
|
|
#define SATAINTSTAT_REG 0x1508
|
|
#define SATAINTMASK_REG 0x150C
|
|
|
|
/* SATA INT status register (SATAINTSTAT) bits */
|
|
#define SATAINTSTAT_SERR BIT(3)
|
|
#define SATAINTSTAT_ATA BIT(0)
|
|
|
|
/* SATA INT mask register (SATAINTSTAT) bits */
|
|
#define SATAINTMASK_SERRMSK BIT(3)
|
|
#define SATAINTMASK_ERRMSK BIT(2)
|
|
#define SATAINTMASK_ERRCRTMSK BIT(1)
|
|
#define SATAINTMASK_ATAMSK BIT(0)
|
|
|
|
#define SATA_RCAR_INT_MASK (SATAINTMASK_SERRMSK | \
|
|
SATAINTMASK_ATAMSK)
|
|
|
|
/* Physical Layer Control Registers */
|
|
#define SATAPCTLR1_REG 0x43
|
|
#define SATAPCTLR2_REG 0x52
|
|
#define SATAPCTLR3_REG 0x5A
|
|
#define SATAPCTLR4_REG 0x60
|
|
|
|
/* Descriptor table word 0 bit (when DTA32M = 1) */
|
|
#define SATA_RCAR_DTEND BIT(0)
|
|
|
|
#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
|
|
|
|
/* Gen2 Physical Layer Control Registers */
|
|
#define RCAR_GEN2_PHY_CTL1_REG 0x1704
|
|
#define RCAR_GEN2_PHY_CTL1 0x34180002
|
|
#define RCAR_GEN2_PHY_CTL1_SS 0xC180 /* Spread Spectrum */
|
|
|
|
#define RCAR_GEN2_PHY_CTL2_REG 0x170C
|
|
#define RCAR_GEN2_PHY_CTL2 0x00002303
|
|
|
|
#define RCAR_GEN2_PHY_CTL3_REG 0x171C
|
|
#define RCAR_GEN2_PHY_CTL3 0x000B0194
|
|
|
|
#define RCAR_GEN2_PHY_CTL4_REG 0x1724
|
|
#define RCAR_GEN2_PHY_CTL4 0x00030994
|
|
|
|
#define RCAR_GEN2_PHY_CTL5_REG 0x1740
|
|
#define RCAR_GEN2_PHY_CTL5 0x03004001
|
|
#define RCAR_GEN2_PHY_CTL5_DC BIT(1) /* DC connection */
|
|
#define RCAR_GEN2_PHY_CTL5_TR BIT(2) /* Termination Resistor */
|
|
|
|
enum sata_rcar_type {
|
|
RCAR_GEN1_SATA,
|
|
RCAR_GEN2_SATA,
|
|
};
|
|
|
|
struct sata_rcar_priv {
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
enum sata_rcar_type type;
|
|
};
|
|
|
|
static void sata_rcar_gen1_phy_preinit(struct sata_rcar_priv *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
|
|
/* idle state */
|
|
iowrite32(0, base + SATAPHYADDR_REG);
|
|
/* reset */
|
|
iowrite32(SATAPHYRESET_PHYRST, base + SATAPHYRESET_REG);
|
|
udelay(10);
|
|
/* deassert reset */
|
|
iowrite32(0, base + SATAPHYRESET_REG);
|
|
}
|
|
|
|
static void sata_rcar_gen1_phy_write(struct sata_rcar_priv *priv, u16 reg,
|
|
u32 val, int group)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
int timeout;
|
|
|
|
/* deassert reset */
|
|
iowrite32(0, base + SATAPHYRESET_REG);
|
|
/* lane 1 */
|
|
iowrite32(SATAPHYACCEN_PHYLANE, base + SATAPHYACCEN_REG);
|
|
/* write phy register value */
|
|
iowrite32(val, base + SATAPHYWDATA_REG);
|
|
/* set register group */
|
|
if (group)
|
|
reg |= SATAPHYADDR_PHYRATEMODE;
|
|
/* write command */
|
|
iowrite32(SATAPHYADDR_PHYCMD_WRITE | reg, base + SATAPHYADDR_REG);
|
|
/* wait for ack */
|
|
for (timeout = 0; timeout < 100; timeout++) {
|
|
val = ioread32(base + SATAPHYACK_REG);
|
|
if (val & SATAPHYACK_PHYACK)
|
|
break;
|
|
}
|
|
if (timeout >= 100)
|
|
pr_err("%s timeout\n", __func__);
|
|
/* idle state */
|
|
iowrite32(0, base + SATAPHYADDR_REG);
|
|
}
|
|
|
|
static void sata_rcar_gen1_phy_init(struct sata_rcar_priv *priv)
|
|
{
|
|
sata_rcar_gen1_phy_preinit(priv);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR1_REG, 0x00200188, 1);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR3_REG, 0x0000A061, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 0);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR2_REG, 0x20000000, 1);
|
|
sata_rcar_gen1_phy_write(priv, SATAPCTLR4_REG, 0x28E80000, 0);
|
|
}
|
|
|
|
static void sata_rcar_gen2_phy_init(struct sata_rcar_priv *priv)
|
|
{
|
|
void __iomem *base = priv->base;
|
|
|
|
iowrite32(RCAR_GEN2_PHY_CTL1, base + RCAR_GEN2_PHY_CTL1_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL2, base + RCAR_GEN2_PHY_CTL2_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL3, base + RCAR_GEN2_PHY_CTL3_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL4, base + RCAR_GEN2_PHY_CTL4_REG);
|
|
iowrite32(RCAR_GEN2_PHY_CTL5 | RCAR_GEN2_PHY_CTL5_DC |
|
|
RCAR_GEN2_PHY_CTL5_TR, base + RCAR_GEN2_PHY_CTL5_REG);
|
|
}
|
|
|
|
static void sata_rcar_freeze(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
|
|
/* mask */
|
|
iowrite32(0x7ff, priv->base + SATAINTMASK_REG);
|
|
|
|
ata_sff_freeze(ap);
|
|
}
|
|
|
|
static void sata_rcar_thaw(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
/* ack */
|
|
iowrite32(~(u32)SATA_RCAR_INT_MASK, base + SATAINTSTAT_REG);
|
|
|
|
ata_sff_thaw(ap);
|
|
|
|
/* unmask */
|
|
iowrite32(0x7ff & ~SATA_RCAR_INT_MASK, base + SATAINTMASK_REG);
|
|
}
|
|
|
|
static void sata_rcar_ioread16_rep(void __iomem *reg, void *buffer, int count)
|
|
{
|
|
u16 *ptr = buffer;
|
|
|
|
while (count--) {
|
|
u16 data = ioread32(reg);
|
|
|
|
*ptr++ = data;
|
|
}
|
|
}
|
|
|
|
static void sata_rcar_iowrite16_rep(void __iomem *reg, void *buffer, int count)
|
|
{
|
|
const u16 *ptr = buffer;
|
|
|
|
while (count--)
|
|
iowrite32(*ptr++, reg);
|
|
}
|
|
|
|
static u8 sata_rcar_check_status(struct ata_port *ap)
|
|
{
|
|
return ioread32(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
static u8 sata_rcar_check_altstatus(struct ata_port *ap)
|
|
{
|
|
return ioread32(ap->ioaddr.altstatus_addr);
|
|
}
|
|
|
|
static void sata_rcar_set_devctl(struct ata_port *ap, u8 ctl)
|
|
{
|
|
iowrite32(ctl, ap->ioaddr.ctl_addr);
|
|
}
|
|
|
|
static void sata_rcar_dev_select(struct ata_port *ap, unsigned int device)
|
|
{
|
|
iowrite32(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
|
|
ata_sff_pause(ap); /* needed; also flushes, for mmio */
|
|
}
|
|
|
|
static unsigned int sata_rcar_ata_devchk(struct ata_port *ap,
|
|
unsigned int device)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
u8 nsect, lbal;
|
|
|
|
sata_rcar_dev_select(ap, device);
|
|
|
|
iowrite32(0x55, ioaddr->nsect_addr);
|
|
iowrite32(0xaa, ioaddr->lbal_addr);
|
|
|
|
iowrite32(0xaa, ioaddr->nsect_addr);
|
|
iowrite32(0x55, ioaddr->lbal_addr);
|
|
|
|
iowrite32(0x55, ioaddr->nsect_addr);
|
|
iowrite32(0xaa, ioaddr->lbal_addr);
|
|
|
|
nsect = ioread32(ioaddr->nsect_addr);
|
|
lbal = ioread32(ioaddr->lbal_addr);
|
|
|
|
if (nsect == 0x55 && lbal == 0xaa)
|
|
return 1; /* found a device */
|
|
|
|
return 0; /* nothing found */
|
|
}
|
|
|
|
static int sata_rcar_wait_after_reset(struct ata_link *link,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
|
|
ata_msleep(ap, ATA_WAIT_AFTER_RESET);
|
|
|
|
return ata_sff_wait_ready(link, deadline);
|
|
}
|
|
|
|
static int sata_rcar_bus_softreset(struct ata_port *ap, unsigned long deadline)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
|
|
|
|
/* software reset. causes dev0 to be selected */
|
|
iowrite32(ap->ctl, ioaddr->ctl_addr);
|
|
udelay(20);
|
|
iowrite32(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
|
|
udelay(20);
|
|
iowrite32(ap->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = ap->ctl;
|
|
|
|
/* wait the port to become ready */
|
|
return sata_rcar_wait_after_reset(&ap->link, deadline);
|
|
}
|
|
|
|
static int sata_rcar_softreset(struct ata_link *link, unsigned int *classes,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
unsigned int devmask = 0;
|
|
int rc;
|
|
u8 err;
|
|
|
|
/* determine if device 0 is present */
|
|
if (sata_rcar_ata_devchk(ap, 0))
|
|
devmask |= 1 << 0;
|
|
|
|
/* issue bus reset */
|
|
DPRINTK("about to softreset, devmask=%x\n", devmask);
|
|
rc = sata_rcar_bus_softreset(ap, deadline);
|
|
/* if link is occupied, -ENODEV too is an error */
|
|
if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
|
|
ata_link_err(link, "SRST failed (errno=%d)\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
/* determine by signature whether we have ATA or ATAPI devices */
|
|
classes[0] = ata_sff_dev_classify(&link->device[0], devmask, &err);
|
|
|
|
DPRINTK("classes[0]=%u\n", classes[0]);
|
|
return 0;
|
|
}
|
|
|
|
static void sata_rcar_tf_load(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
iowrite32(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
|
|
iowrite32(tf->hob_feature, ioaddr->feature_addr);
|
|
iowrite32(tf->hob_nsect, ioaddr->nsect_addr);
|
|
iowrite32(tf->hob_lbal, ioaddr->lbal_addr);
|
|
iowrite32(tf->hob_lbam, ioaddr->lbam_addr);
|
|
iowrite32(tf->hob_lbah, ioaddr->lbah_addr);
|
|
VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
|
|
tf->hob_feature,
|
|
tf->hob_nsect,
|
|
tf->hob_lbal,
|
|
tf->hob_lbam,
|
|
tf->hob_lbah);
|
|
}
|
|
|
|
if (is_addr) {
|
|
iowrite32(tf->feature, ioaddr->feature_addr);
|
|
iowrite32(tf->nsect, ioaddr->nsect_addr);
|
|
iowrite32(tf->lbal, ioaddr->lbal_addr);
|
|
iowrite32(tf->lbam, ioaddr->lbam_addr);
|
|
iowrite32(tf->lbah, ioaddr->lbah_addr);
|
|
VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
|
|
tf->feature,
|
|
tf->nsect,
|
|
tf->lbal,
|
|
tf->lbam,
|
|
tf->lbah);
|
|
}
|
|
|
|
if (tf->flags & ATA_TFLAG_DEVICE) {
|
|
iowrite32(tf->device, ioaddr->device_addr);
|
|
VPRINTK("device 0x%X\n", tf->device);
|
|
}
|
|
|
|
ata_wait_idle(ap);
|
|
}
|
|
|
|
static void sata_rcar_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
tf->command = sata_rcar_check_status(ap);
|
|
tf->feature = ioread32(ioaddr->error_addr);
|
|
tf->nsect = ioread32(ioaddr->nsect_addr);
|
|
tf->lbal = ioread32(ioaddr->lbal_addr);
|
|
tf->lbam = ioread32(ioaddr->lbam_addr);
|
|
tf->lbah = ioread32(ioaddr->lbah_addr);
|
|
tf->device = ioread32(ioaddr->device_addr);
|
|
|
|
if (tf->flags & ATA_TFLAG_LBA48) {
|
|
iowrite32(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
|
|
tf->hob_feature = ioread32(ioaddr->error_addr);
|
|
tf->hob_nsect = ioread32(ioaddr->nsect_addr);
|
|
tf->hob_lbal = ioread32(ioaddr->lbal_addr);
|
|
tf->hob_lbam = ioread32(ioaddr->lbam_addr);
|
|
tf->hob_lbah = ioread32(ioaddr->lbah_addr);
|
|
iowrite32(tf->ctl, ioaddr->ctl_addr);
|
|
ap->last_ctl = tf->ctl;
|
|
}
|
|
}
|
|
|
|
static void sata_rcar_exec_command(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
|
|
|
|
iowrite32(tf->command, ap->ioaddr.command_addr);
|
|
ata_sff_pause(ap);
|
|
}
|
|
|
|
static unsigned int sata_rcar_data_xfer(struct ata_device *dev,
|
|
unsigned char *buf,
|
|
unsigned int buflen, int rw)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
void __iomem *data_addr = ap->ioaddr.data_addr;
|
|
unsigned int words = buflen >> 1;
|
|
|
|
/* Transfer multiple of 2 bytes */
|
|
if (rw == READ)
|
|
sata_rcar_ioread16_rep(data_addr, buf, words);
|
|
else
|
|
sata_rcar_iowrite16_rep(data_addr, buf, words);
|
|
|
|
/* Transfer trailing byte, if any. */
|
|
if (unlikely(buflen & 0x01)) {
|
|
unsigned char pad[2] = { };
|
|
|
|
/* Point buf to the tail of buffer */
|
|
buf += buflen - 1;
|
|
|
|
/*
|
|
* Use io*16_rep() accessors here as well to avoid pointlessly
|
|
* swapping bytes to and from on the big endian machines...
|
|
*/
|
|
if (rw == READ) {
|
|
sata_rcar_ioread16_rep(data_addr, pad, 1);
|
|
*buf = pad[0];
|
|
} else {
|
|
pad[0] = *buf;
|
|
sata_rcar_iowrite16_rep(data_addr, pad, 1);
|
|
}
|
|
words++;
|
|
}
|
|
|
|
return words << 1;
|
|
}
|
|
|
|
static void sata_rcar_drain_fifo(struct ata_queued_cmd *qc)
|
|
{
|
|
int count;
|
|
struct ata_port *ap;
|
|
|
|
/* We only need to flush incoming data when a command was running */
|
|
if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
|
|
return;
|
|
|
|
ap = qc->ap;
|
|
/* Drain up to 64K of data before we give up this recovery method */
|
|
for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) &&
|
|
count < 65536; count += 2)
|
|
ioread32(ap->ioaddr.data_addr);
|
|
|
|
/* Can become DEBUG later */
|
|
if (count)
|
|
ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count);
|
|
}
|
|
|
|
static int sata_rcar_scr_read(struct ata_link *link, unsigned int sc_reg,
|
|
u32 *val)
|
|
{
|
|
if (sc_reg > SCR_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
*val = ioread32(link->ap->ioaddr.scr_addr + (sc_reg << 2));
|
|
return 0;
|
|
}
|
|
|
|
static int sata_rcar_scr_write(struct ata_link *link, unsigned int sc_reg,
|
|
u32 val)
|
|
{
|
|
if (sc_reg > SCR_ACTIVE)
|
|
return -EINVAL;
|
|
|
|
iowrite32(val, link->ap->ioaddr.scr_addr + (sc_reg << 2));
|
|
return 0;
|
|
}
|
|
|
|
static void sata_rcar_bmdma_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_bmdma_prd *prd = ap->bmdma_prd;
|
|
struct scatterlist *sg;
|
|
unsigned int si;
|
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr, sg_len;
|
|
|
|
/*
|
|
* Note: h/w doesn't support 64-bit, so we unconditionally
|
|
* truncate dma_addr_t to u32.
|
|
*/
|
|
addr = (u32)sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
prd[si].addr = cpu_to_le32(addr);
|
|
prd[si].flags_len = cpu_to_le32(sg_len);
|
|
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
|
|
}
|
|
|
|
/* end-of-table flag */
|
|
prd[si - 1].addr |= cpu_to_le32(SATA_RCAR_DTEND);
|
|
}
|
|
|
|
static void sata_rcar_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
return;
|
|
|
|
sata_rcar_bmdma_fill_sg(qc);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_setup(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
unsigned int rw = qc->tf.flags & ATA_TFLAG_WRITE;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* load PRD table addr. */
|
|
mb(); /* make sure PRD table writes are visible to controller */
|
|
iowrite32(ap->bmdma_prd_dma, base + ATAPI_DTB_ADR_REG);
|
|
|
|
/* specify data direction, triple-check start bit is clear */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
dmactl &= ~(ATAPI_CONTROL1_RW | ATAPI_CONTROL1_STOP);
|
|
if (dmactl & ATAPI_CONTROL1_START) {
|
|
dmactl &= ~ATAPI_CONTROL1_START;
|
|
dmactl |= ATAPI_CONTROL1_STOP;
|
|
}
|
|
if (!rw)
|
|
dmactl |= ATAPI_CONTROL1_RW;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* issue r/w command */
|
|
ap->ops->sff_exec_command(ap, &qc->tf);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* start host DMA transaction */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
dmactl &= ~ATAPI_CONTROL1_STOP;
|
|
dmactl |= ATAPI_CONTROL1_START;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
}
|
|
|
|
static void sata_rcar_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 dmactl;
|
|
|
|
/* force termination of DMA transfer if active */
|
|
dmactl = ioread32(base + ATAPI_CONTROL1_REG);
|
|
if (dmactl & ATAPI_CONTROL1_START) {
|
|
dmactl &= ~ATAPI_CONTROL1_START;
|
|
dmactl |= ATAPI_CONTROL1_STOP;
|
|
iowrite32(dmactl, base + ATAPI_CONTROL1_REG);
|
|
}
|
|
|
|
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
|
|
ata_sff_dma_pause(ap);
|
|
}
|
|
|
|
static u8 sata_rcar_bmdma_status(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
u8 host_stat = 0;
|
|
u32 status;
|
|
|
|
status = ioread32(priv->base + ATAPI_STATUS_REG);
|
|
if (status & ATAPI_STATUS_DEVINT)
|
|
host_stat |= ATA_DMA_INTR;
|
|
if (status & ATAPI_STATUS_ACT)
|
|
host_stat |= ATA_DMA_ACTIVE;
|
|
|
|
return host_stat;
|
|
}
|
|
|
|
static struct scsi_host_template sata_rcar_sht = {
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
/*
|
|
* This controller allows transfer chunks up to 512MB which cross 64KB
|
|
* boundaries, therefore the DMA limits are more relaxed than standard
|
|
* ATA SFF.
|
|
*/
|
|
.sg_tablesize = ATA_MAX_PRD,
|
|
.dma_boundary = SATA_RCAR_DMA_BOUNDARY,
|
|
};
|
|
|
|
static struct ata_port_operations sata_rcar_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.freeze = sata_rcar_freeze,
|
|
.thaw = sata_rcar_thaw,
|
|
.softreset = sata_rcar_softreset,
|
|
|
|
.scr_read = sata_rcar_scr_read,
|
|
.scr_write = sata_rcar_scr_write,
|
|
|
|
.sff_dev_select = sata_rcar_dev_select,
|
|
.sff_set_devctl = sata_rcar_set_devctl,
|
|
.sff_check_status = sata_rcar_check_status,
|
|
.sff_check_altstatus = sata_rcar_check_altstatus,
|
|
.sff_tf_load = sata_rcar_tf_load,
|
|
.sff_tf_read = sata_rcar_tf_read,
|
|
.sff_exec_command = sata_rcar_exec_command,
|
|
.sff_data_xfer = sata_rcar_data_xfer,
|
|
.sff_drain_fifo = sata_rcar_drain_fifo,
|
|
|
|
.qc_prep = sata_rcar_qc_prep,
|
|
|
|
.bmdma_setup = sata_rcar_bmdma_setup,
|
|
.bmdma_start = sata_rcar_bmdma_start,
|
|
.bmdma_stop = sata_rcar_bmdma_stop,
|
|
.bmdma_status = sata_rcar_bmdma_status,
|
|
};
|
|
|
|
static void sata_rcar_serr_interrupt(struct ata_port *ap)
|
|
{
|
|
struct sata_rcar_priv *priv = ap->host->private_data;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
int freeze = 0;
|
|
u32 serror;
|
|
|
|
serror = ioread32(priv->base + SCRSERR_REG);
|
|
if (!serror)
|
|
return;
|
|
|
|
DPRINTK("SError @host_intr: 0x%x\n", serror);
|
|
|
|
/* first, analyze and record host port events */
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) {
|
|
/* Setup a soft-reset EH action */
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "%s", "hotplug");
|
|
|
|
freeze = serror & SERR_COMM_WAKE ? 0 : 1;
|
|
}
|
|
|
|
/* freeze or abort */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void sata_rcar_ata_interrupt(struct ata_port *ap)
|
|
{
|
|
struct ata_queued_cmd *qc;
|
|
int handled = 0;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc)
|
|
handled |= ata_bmdma_port_intr(ap, qc);
|
|
|
|
/* be sure to clear ATA interrupt */
|
|
if (!handled)
|
|
sata_rcar_check_status(ap);
|
|
}
|
|
|
|
static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
unsigned int handled = 0;
|
|
struct ata_port *ap;
|
|
u32 sataintstat;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
sataintstat = ioread32(base + SATAINTSTAT_REG);
|
|
sataintstat &= SATA_RCAR_INT_MASK;
|
|
if (!sataintstat)
|
|
goto done;
|
|
/* ack */
|
|
iowrite32(~sataintstat & 0x7ff, base + SATAINTSTAT_REG);
|
|
|
|
ap = host->ports[0];
|
|
|
|
if (sataintstat & SATAINTSTAT_ATA)
|
|
sata_rcar_ata_interrupt(ap);
|
|
|
|
if (sataintstat & SATAINTSTAT_SERR)
|
|
sata_rcar_serr_interrupt(ap);
|
|
|
|
handled = 1;
|
|
done:
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void sata_rcar_setup_port(struct ata_host *host)
|
|
{
|
|
struct ata_port *ap = host->ports[0];
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
ap->ops = &sata_rcar_port_ops;
|
|
ap->pio_mask = ATA_PIO4;
|
|
ap->udma_mask = ATA_UDMA6;
|
|
ap->flags |= ATA_FLAG_SATA;
|
|
|
|
ioaddr->cmd_addr = base + SDATA_REG;
|
|
ioaddr->ctl_addr = base + SSDEVCON_REG;
|
|
ioaddr->scr_addr = base + SCRSSTS_REG;
|
|
ioaddr->altstatus_addr = ioaddr->ctl_addr;
|
|
|
|
ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << 2);
|
|
ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << 2);
|
|
ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << 2);
|
|
ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << 2);
|
|
ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << 2);
|
|
ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << 2);
|
|
ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << 2);
|
|
ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << 2);
|
|
ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << 2);
|
|
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
|
|
}
|
|
|
|
static void sata_rcar_init_controller(struct ata_host *host)
|
|
{
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
u32 val;
|
|
|
|
/* reset and setup phy */
|
|
switch (priv->type) {
|
|
case RCAR_GEN1_SATA:
|
|
sata_rcar_gen1_phy_init(priv);
|
|
break;
|
|
case RCAR_GEN2_SATA:
|
|
sata_rcar_gen2_phy_init(priv);
|
|
break;
|
|
default:
|
|
dev_warn(host->dev, "SATA phy is not initialized\n");
|
|
break;
|
|
}
|
|
|
|
/* SATA-IP reset state */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val |= ATAPI_CONTROL1_RESET;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* ISM mode, PRD mode, DTEND flag at bit 0 */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val |= ATAPI_CONTROL1_ISM;
|
|
val |= ATAPI_CONTROL1_DESE;
|
|
val |= ATAPI_CONTROL1_DTA32M;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* Release the SATA-IP from the reset state */
|
|
val = ioread32(base + ATAPI_CONTROL1_REG);
|
|
val &= ~ATAPI_CONTROL1_RESET;
|
|
iowrite32(val, base + ATAPI_CONTROL1_REG);
|
|
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(0x7ff, base + SATAINTMASK_REG);
|
|
/* enable interrupts */
|
|
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
|
|
}
|
|
|
|
static struct of_device_id sata_rcar_match[] = {
|
|
{
|
|
/* Deprecated by "renesas,sata-r8a7779" */
|
|
.compatible = "renesas,rcar-sata",
|
|
.data = (void *)RCAR_GEN1_SATA,
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7779",
|
|
.data = (void *)RCAR_GEN1_SATA,
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7790",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{
|
|
.compatible = "renesas,sata-r8a7791",
|
|
.data = (void *)RCAR_GEN2_SATA
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sata_rcar_match);
|
|
|
|
static const struct platform_device_id sata_rcar_id_table[] = {
|
|
{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
|
|
{ "sata-r8a7779", RCAR_GEN1_SATA },
|
|
{ "sata-r8a7790", RCAR_GEN2_SATA },
|
|
{ "sata-r8a7791", RCAR_GEN2_SATA },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
|
|
|
|
static int sata_rcar_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
struct ata_host *host;
|
|
struct sata_rcar_priv *priv;
|
|
struct resource *mem;
|
|
int irq;
|
|
int ret = 0;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0)
|
|
return -EINVAL;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct sata_rcar_priv),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_device(sata_rcar_match, &pdev->dev);
|
|
if (of_id)
|
|
priv->type = (enum sata_rcar_type)of_id->data;
|
|
else
|
|
priv->type = platform_get_device_id(pdev)->driver_data;
|
|
|
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->clk)) {
|
|
dev_err(&pdev->dev, "failed to get access to sata clock\n");
|
|
return PTR_ERR(priv->clk);
|
|
}
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
if (!host) {
|
|
dev_err(&pdev->dev, "ata_host_alloc failed\n");
|
|
ret = -ENOMEM;
|
|
goto cleanup;
|
|
}
|
|
|
|
host->private_data = priv;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(priv->base)) {
|
|
ret = PTR_ERR(priv->base);
|
|
goto cleanup;
|
|
}
|
|
|
|
/* setup port */
|
|
sata_rcar_setup_port(host);
|
|
|
|
/* initialize host controller */
|
|
sata_rcar_init_controller(host);
|
|
|
|
ret = ata_host_activate(host, irq, sata_rcar_interrupt, 0,
|
|
&sata_rcar_sht);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
cleanup:
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sata_rcar_remove(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *host = platform_get_drvdata(pdev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
ata_host_detach(host);
|
|
|
|
/* disable interrupts */
|
|
iowrite32(0, base + ATAPI_INT_ENABLE_REG);
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(0x7ff, base + SATAINTMASK_REG);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int sata_rcar_suspend(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
int ret;
|
|
|
|
ret = ata_host_suspend(host, PMSG_SUSPEND);
|
|
if (!ret) {
|
|
/* disable interrupts */
|
|
iowrite32(0, base + ATAPI_INT_ENABLE_REG);
|
|
/* mask */
|
|
iowrite32(0x7ff, base + SATAINTMASK_REG);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sata_rcar_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct sata_rcar_priv *priv = host->private_data;
|
|
void __iomem *base = priv->base;
|
|
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
/* ack and mask */
|
|
iowrite32(0, base + SATAINTSTAT_REG);
|
|
iowrite32(0x7ff, base + SATAINTMASK_REG);
|
|
/* enable interrupts */
|
|
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sata_rcar_pm_ops = {
|
|
.suspend = sata_rcar_suspend,
|
|
.resume = sata_rcar_resume,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver sata_rcar_driver = {
|
|
.probe = sata_rcar_probe,
|
|
.remove = sata_rcar_remove,
|
|
.id_table = sata_rcar_id_table,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = sata_rcar_match,
|
|
#ifdef CONFIG_PM
|
|
.pm = &sata_rcar_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sata_rcar_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
MODULE_DESCRIPTION("Renesas R-Car SATA controller low level driver");
|