linux/drivers/watchdog/sp5100_tco.c
Takahisa Tanaka 740fbddf5c watchdog: sp5100_tco: Add SB8x0 chipset support
The current sp5100_tco driver only supports SP5100/SB7x0 chipset, doesn't
support SB8x0 chipset, because current sp5100_tco driver doesn't know that the
offset address for watchdog timer was changed from SB8x0 chipset.

The offset address of SP5100 and SB7x0 chipsets are as follows, quote from the
AMD SB700/710/750 Register Reference Guide (Page 164) and the AMD SP5100
Register Reference Guide (Page 166).

  WatchDogTimerControl 69h
  WatchDogTimerBase0   6Ch
  WatchDogTimerBase1   6Dh
  WatchDogTimerBase2   6Eh
  WatchDogTimerBase3   6Fh

In contrast, the offset address of SB8x0 chipset is as follows, quote from
AMD SB800-Series Southbridges Register Reference Guide (Page 147).

  WatchDogTimerEn      48h
  WatchDogTimerConfig  4Ch

So, In the case of SB8x0 chipset, sp5100_tco reads meaningless MMIO
address (for example, 0xbafe00) from wrong offset address, and the following
message is logged.

   SP5100 TCO timer: mmio address 0xbafe00 already in use

With this patch, sp5100_tco driver supports SB8x0 chipset, and can avoid
iomem resource conflict. The processing of this patch is as follows.

 Step 1) Attempt to get the watchdog base address from indirect I/O (0xCD6
         and 0xCD7).
  - Go to the step 7 if obtained address hasn't conflicted with other
    resource. But, currently, the address (0xfec000f0) conflicts with the
    IOAPIC MMIO address, and the following message is logged.

       SP5100 TCO timer: mmio address 0xfec000f0 already in use

    0xfec000f0 is recommended by AMD BIOS Developer's Guide. So, go to the
    next step.

 Step 2) Attempt to get the SBResource_MMIO base address from AcpiMmioEN (for
         SB8x0,  PM_Reg:24h) or SBResource_MMIO (SP5100/SB7x0, PCI_Reg:9Ch)
         register.
  - Go to the step 7 if these register has enabled by BIOS, and obtained
    address hasn't conflicted with other resource.
  - If above condition isn't true, go to the next step.

 Step 3) Attempt to get the free MMIO address from allocate_resource().
  - Go to the step 7 if these register has enabled by BIOS, and obtained
    address hasn't conflicted with other resource.
  - Driver initialization has failed if obtained address has conflicted
    with other resource, and no 'force_addr' parameter is specified.

 Step 4) Use the specified address If 'force_addr' parameter is specified.
  - allocate_resource() function may fail, when the PCI bridge device occupies
    iomem resource from 0xf0000000 to 0xffffffff. To handle such a case,
    I added 'force_addr' parameter to sp5100_tco driver. With 'force_addr'
    parameter, sp5100_tco driver directly can assign MMIO address for watchdog
    timer from free iomem region. Note that It's dangerous to specify wrong
    address in the 'force_addr' parameter.

      Example of force_addr parameter use
        # cat /proc/iomem
        ...snip...
        fec00000-fec003ff : IOAPIC 0
                                      <--- free MMIO region
        fec10000-fec1001f : pnp 00:0b
        fec20000-fec203ff : IOAPIC 1
        ...snip...
        # cat /etc/modprobe.d/sp5100_tco.conf
        options sp5100_tco force_addr=0xfec00800
        # modprobe sp5100_tco
        # cat /proc/iomem
        ...snip...
        fec00000-fec003ff : IOAPIC 0
        fec00800-fec00807 : SP5100 TCO  <--- watchdog timer MMIO address
        fec10000-fec1001f : pnp 00:0b
        fec20000-fec203ff : IOAPIC 1
        ...snip...
        #

  - Driver initialization has failed if specified address has conflicted
    with other resource.

 Step 5) Disable the watchdog timer
  - To rewrite the watchdog timer register of the chipset, absolutely
    guarantee that the watchdog timer is disabled.

 Step 6) Re-program the watchdog timer MMIO address to chipset.
  - Re-program the obtained MMIO address in Step 3 or Step 4 to chipset via
    indirect I/O (0xCD6 and 0xCD7).

 Step 7) Enable and setup the watchdog timer

This patch has worked fine on my test environment (ASUS M4A89GTD-PRO/USB3 and
DL165G7). therefore I believe that it's no problem to re-program the MMIO
address for watchdog timer to chipset during disabled watchdog. However,
I'm not sure about it, because I don't know much about chipset programming.

So, any comments will be welcome.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43176
Tested-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Takahisa Tanaka <mc74hc00@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-12-19 22:25:09 +01:00

709 lines
18 KiB
C

/*
* sp5100_tco : TCO timer driver for sp5100 chipsets
*
* (c) Copyright 2009 Google Inc., All Rights Reserved.
*
* Based on i8xx_tco.c:
* (c) Copyright 2000 kernel concepts <nils@kernelconcepts.de>, All Rights
* Reserved.
* http://www.kernelconcepts.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* See AMD Publication 43009 "AMD SB700/710/750 Register Reference Guide",
* AMD Publication 45482 "AMD SB800-Series Southbridges Register
* Reference Guide"
*/
/*
* Includes, defines, variables, module parameters, ...
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include "sp5100_tco.h"
/* Module and version information */
#define TCO_VERSION "0.03"
#define TCO_MODULE_NAME "SP5100 TCO timer"
#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
/* internal variables */
static u32 tcobase_phys;
static u32 resbase_phys;
static u32 tco_wdt_fired;
static void __iomem *tcobase;
static unsigned int pm_iobase;
static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */
static unsigned long timer_alive;
static char tco_expect_close;
static struct pci_dev *sp5100_tco_pci;
static struct resource wdt_res = {
.name = "Watchdog Timer",
.flags = IORESOURCE_MEM,
};
/* the watchdog platform device */
static struct platform_device *sp5100_tco_platform_device;
/* module parameters */
#define WATCHDOG_HEARTBEAT 60 /* 60 sec default heartbeat. */
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
__MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started."
" (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
static unsigned int force_addr;
module_param(force_addr, uint, 0);
MODULE_PARM_DESC(force_addr, "Force the use of specified MMIO address."
" ONLY USE THIS PARAMETER IF YOU REALLY KNOW"
" WHAT YOU ARE DOING (default=none)");
/*
* Some TCO specific functions
*/
static void tco_timer_start(void)
{
u32 val;
unsigned long flags;
spin_lock_irqsave(&tco_lock, flags);
val = readl(SP5100_WDT_CONTROL(tcobase));
val |= SP5100_WDT_START_STOP_BIT;
writel(val, SP5100_WDT_CONTROL(tcobase));
spin_unlock_irqrestore(&tco_lock, flags);
}
static void tco_timer_stop(void)
{
u32 val;
unsigned long flags;
spin_lock_irqsave(&tco_lock, flags);
val = readl(SP5100_WDT_CONTROL(tcobase));
val &= ~SP5100_WDT_START_STOP_BIT;
writel(val, SP5100_WDT_CONTROL(tcobase));
spin_unlock_irqrestore(&tco_lock, flags);
}
static void tco_timer_keepalive(void)
{
u32 val;
unsigned long flags;
spin_lock_irqsave(&tco_lock, flags);
val = readl(SP5100_WDT_CONTROL(tcobase));
val |= SP5100_WDT_TRIGGER_BIT;
writel(val, SP5100_WDT_CONTROL(tcobase));
spin_unlock_irqrestore(&tco_lock, flags);
}
static int tco_timer_set_heartbeat(int t)
{
unsigned long flags;
if (t < 0 || t > 0xffff)
return -EINVAL;
/* Write new heartbeat to watchdog */
spin_lock_irqsave(&tco_lock, flags);
writel(t, SP5100_WDT_COUNT(tcobase));
spin_unlock_irqrestore(&tco_lock, flags);
heartbeat = t;
return 0;
}
static void tco_timer_enable(void)
{
int val;
if (sp5100_tco_pci->revision >= 0x40) {
/* For SB800 or later */
/* Set the Watchdog timer resolution to 1 sec */
outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
val |= SB800_PM_WATCHDOG_SECOND_RES;
outb(val, SB800_IO_PM_DATA_REG);
/* Enable watchdog decode bit and watchdog timer */
outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
val |= SB800_PCI_WATCHDOG_DECODE_EN;
val &= ~SB800_PM_WATCHDOG_DISABLE;
outb(val, SB800_IO_PM_DATA_REG);
} else {
/* For SP5100 or SB7x0 */
/* Enable watchdog decode bit */
pci_read_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
&val);
val |= SP5100_PCI_WATCHDOG_DECODE_EN;
pci_write_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
val);
/* Enable Watchdog timer and set the resolution to 1 sec */
outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
val = inb(SP5100_IO_PM_DATA_REG);
val |= SP5100_PM_WATCHDOG_SECOND_RES;
val &= ~SP5100_PM_WATCHDOG_DISABLE;
outb(val, SP5100_IO_PM_DATA_REG);
}
}
static void tco_timer_disable(void)
{
int val;
if (sp5100_tco_pci->revision >= 0x40) {
/* For SB800 or later */
/* Enable watchdog decode bit and Disable watchdog timer */
outb(SB800_PM_WATCHDOG_CONTROL, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
val |= SB800_PCI_WATCHDOG_DECODE_EN;
val |= SB800_PM_WATCHDOG_DISABLE;
outb(val, SB800_IO_PM_DATA_REG);
} else {
/* For SP5100 or SB7x0 */
/* Enable watchdog decode bit */
pci_read_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
&val);
val |= SP5100_PCI_WATCHDOG_DECODE_EN;
pci_write_config_dword(sp5100_tco_pci,
SP5100_PCI_WATCHDOG_MISC_REG,
val);
/* Disable Watchdog timer */
outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
val = inb(SP5100_IO_PM_DATA_REG);
val |= SP5100_PM_WATCHDOG_DISABLE;
outb(val, SP5100_IO_PM_DATA_REG);
}
}
/*
* /dev/watchdog handling
*/
static int sp5100_tco_open(struct inode *inode, struct file *file)
{
/* /dev/watchdog can only be opened once */
if (test_and_set_bit(0, &timer_alive))
return -EBUSY;
/* Reload and activate timer */
tco_timer_start();
tco_timer_keepalive();
return nonseekable_open(inode, file);
}
static int sp5100_tco_release(struct inode *inode, struct file *file)
{
/* Shut off the timer. */
if (tco_expect_close == 42) {
tco_timer_stop();
} else {
pr_crit("Unexpected close, not stopping watchdog!\n");
tco_timer_keepalive();
}
clear_bit(0, &timer_alive);
tco_expect_close = 0;
return 0;
}
static ssize_t sp5100_tco_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
/* See if we got the magic character 'V' and reload the timer */
if (len) {
if (!nowayout) {
size_t i;
/* note: just in case someone wrote the magic character
* five months ago... */
tco_expect_close = 0;
/* scan to see whether or not we got the magic character
*/
for (i = 0; i != len; i++) {
char c;
if (get_user(c, data + i))
return -EFAULT;
if (c == 'V')
tco_expect_close = 42;
}
}
/* someone wrote to us, we should reload the timer */
tco_timer_keepalive();
}
return len;
}
static long sp5100_tco_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int new_options, retval = -EINVAL;
int new_heartbeat;
void __user *argp = (void __user *)arg;
int __user *p = argp;
static const struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING |
WDIOF_MAGICCLOSE,
.firmware_version = 0,
.identity = TCO_MODULE_NAME,
};
switch (cmd) {
case WDIOC_GETSUPPORT:
return copy_to_user(argp, &ident,
sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_SETOPTIONS:
if (get_user(new_options, p))
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
tco_timer_stop();
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
tco_timer_start();
tco_timer_keepalive();
retval = 0;
}
return retval;
case WDIOC_KEEPALIVE:
tco_timer_keepalive();
return 0;
case WDIOC_SETTIMEOUT:
if (get_user(new_heartbeat, p))
return -EFAULT;
if (tco_timer_set_heartbeat(new_heartbeat))
return -EINVAL;
tco_timer_keepalive();
/* Fall through */
case WDIOC_GETTIMEOUT:
return put_user(heartbeat, p);
default:
return -ENOTTY;
}
}
/*
* Kernel Interfaces
*/
static const struct file_operations sp5100_tco_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.write = sp5100_tco_write,
.unlocked_ioctl = sp5100_tco_ioctl,
.open = sp5100_tco_open,
.release = sp5100_tco_release,
};
static struct miscdevice sp5100_tco_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
.fops = &sp5100_tco_fops,
};
/*
* Data for PCI driver interface
*
* This data only exists for exporting the supported
* PCI ids via MODULE_DEVICE_TABLE. We do not actually
* register a pci_driver, because someone else might
* want to register another driver on the same PCI id.
*/
static DEFINE_PCI_DEVICE_TABLE(sp5100_tco_pci_tbl) = {
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_ANY_ID,
PCI_ANY_ID, },
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, sp5100_tco_pci_tbl);
/*
* Init & exit routines
*/
static unsigned char sp5100_tco_setupdevice(void)
{
struct pci_dev *dev = NULL;
const char *dev_name = NULL;
u32 val;
u32 index_reg, data_reg, base_addr;
/* Match the PCI device */
for_each_pci_dev(dev) {
if (pci_match_id(sp5100_tco_pci_tbl, dev) != NULL) {
sp5100_tco_pci = dev;
break;
}
}
if (!sp5100_tco_pci)
return 0;
pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
/*
* Determine type of southbridge chipset.
*/
if (sp5100_tco_pci->revision >= 0x40) {
dev_name = SB800_DEVNAME;
index_reg = SB800_IO_PM_INDEX_REG;
data_reg = SB800_IO_PM_DATA_REG;
base_addr = SB800_PM_WATCHDOG_BASE;
} else {
dev_name = SP5100_DEVNAME;
index_reg = SP5100_IO_PM_INDEX_REG;
data_reg = SP5100_IO_PM_DATA_REG;
base_addr = SP5100_PM_WATCHDOG_BASE;
}
/* Request the IO ports used by this driver */
pm_iobase = SP5100_IO_PM_INDEX_REG;
if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) {
pr_err("I/O address 0x%04x already in use\n", pm_iobase);
goto exit;
}
/*
* First, Find the watchdog timer MMIO address from indirect I/O.
*/
outb(base_addr+3, index_reg);
val = inb(data_reg);
outb(base_addr+2, index_reg);
val = val << 8 | inb(data_reg);
outb(base_addr+1, index_reg);
val = val << 8 | inb(data_reg);
outb(base_addr+0, index_reg);
/* Low three bits of BASE are reserved */
val = val << 8 | (inb(data_reg) & 0xf8);
pr_debug("Got 0x%04x from indirect I/O\n", val);
/* Check MMIO address conflict */
if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
dev_name))
goto setup_wdt;
else
pr_debug("MMIO address 0x%04x already in use\n", val);
/*
* Secondly, Find the watchdog timer MMIO address
* from SBResource_MMIO register.
*/
if (sp5100_tco_pci->revision >= 0x40) {
/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG);
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+1, SB800_IO_PM_INDEX_REG);
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
} else {
/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
pci_read_config_dword(sp5100_tco_pci,
SP5100_SB_RESOURCE_MMIO_BASE, &val);
}
/* The SBResource_MMIO is enabled and mapped memory space? */
if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) ==
SB800_ACPI_MMIO_DECODE_EN) {
/* Clear unnecessary the low twelve bits */
val &= ~0xFFF;
/* Add the Watchdog Timer offset to base address. */
val += SB800_PM_WDT_MMIO_OFFSET;
/* Check MMIO address conflict */
if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
dev_name)) {
pr_debug("Got 0x%04x from SBResource_MMIO register\n",
val);
goto setup_wdt;
} else
pr_debug("MMIO address 0x%04x already in use\n", val);
} else
pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
/*
* Lastly re-programming the watchdog timer MMIO address,
* This method is a last resort...
*
* Before re-programming, to ensure that the watchdog timer
* is disabled, disable the watchdog timer.
*/
tco_timer_disable();
if (force_addr) {
/*
* Force the use of watchdog timer MMIO address, and aligned to
* 8byte boundary.
*/
force_addr &= ~0x7;
val = force_addr;
pr_info("Force the use of 0x%04x as MMIO address\n", val);
} else {
/*
* Get empty slot into the resource tree for watchdog timer.
*/
if (allocate_resource(&iomem_resource,
&wdt_res,
SP5100_WDT_MEM_MAP_SIZE,
0xf0000000,
0xfffffff8,
0x8,
NULL,
NULL)) {
pr_err("MMIO allocation failed\n");
goto unreg_region;
}
val = resbase_phys = wdt_res.start;
pr_debug("Got 0x%04x from resource tree\n", val);
}
/* Restore to the low three bits, if chipset is SB8x0(or later) */
if (sp5100_tco_pci->revision >= 0x40) {
u8 reserved_bit;
reserved_bit = inb(base_addr) & 0x7;
val |= (u32)reserved_bit;
}
/* Re-programming the watchdog timer base address */
outb(base_addr+0, index_reg);
/* Low three bits of BASE are reserved */
outb((val >> 0) & 0xf8, data_reg);
outb(base_addr+1, index_reg);
outb((val >> 8) & 0xff, data_reg);
outb(base_addr+2, index_reg);
outb((val >> 16) & 0xff, data_reg);
outb(base_addr+3, index_reg);
outb((val >> 24) & 0xff, data_reg);
/*
* Clear unnecessary the low three bits,
* if chipset is SB8x0(or later)
*/
if (sp5100_tco_pci->revision >= 0x40)
val &= ~0x7;
if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
dev_name)) {
pr_err("MMIO address 0x%04x already in use\n", val);
goto unreg_resource;
}
setup_wdt:
tcobase_phys = val;
tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE);
if (!tcobase) {
pr_err("failed to get tcobase address\n");
goto unreg_mem_region;
}
pr_info("Using 0x%04x for watchdog MMIO address\n", val);
/* Setup the watchdog timer */
tco_timer_enable();
/* Check that the watchdog action is set to reset the system */
val = readl(SP5100_WDT_CONTROL(tcobase));
/*
* Save WatchDogFired status, because WatchDogFired flag is
* cleared here.
*/
tco_wdt_fired = val & SP5100_PM_WATCHDOG_FIRED;
val &= ~SP5100_PM_WATCHDOG_ACTION_RESET;
writel(val, SP5100_WDT_CONTROL(tcobase));
/* Set a reasonable heartbeat before we stop the timer */
tco_timer_set_heartbeat(heartbeat);
/*
* Stop the TCO before we change anything so we don't race with
* a zeroed timer.
*/
tco_timer_stop();
/* Done */
return 1;
unreg_mem_region:
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
unreg_resource:
if (resbase_phys)
release_resource(&wdt_res);
unreg_region:
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
exit:
return 0;
}
static int sp5100_tco_init(struct platform_device *dev)
{
int ret;
char addr_str[16];
/*
* Check whether or not the hardware watchdog is there. If found, then
* set it up.
*/
if (!sp5100_tco_setupdevice())
return -ENODEV;
/* Check to see if last reboot was due to watchdog timeout */
pr_info("Last reboot was %striggered by watchdog.\n",
tco_wdt_fired ? "" : "not ");
/*
* Check that the heartbeat value is within it's range.
* If not, reset to the default.
*/
if (tco_timer_set_heartbeat(heartbeat)) {
heartbeat = WATCHDOG_HEARTBEAT;
tco_timer_set_heartbeat(heartbeat);
}
ret = misc_register(&sp5100_tco_miscdev);
if (ret != 0) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, ret);
goto exit;
}
clear_bit(0, &timer_alive);
/* Show module parameters */
if (force_addr == tcobase_phys)
/* The force_addr is vaild */
sprintf(addr_str, "0x%04x", force_addr);
else
strcpy(addr_str, "none");
pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d, "
"force_addr=%s)\n",
tcobase, heartbeat, nowayout, addr_str);
return 0;
exit:
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
if (resbase_phys)
release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
return ret;
}
static void sp5100_tco_cleanup(void)
{
/* Stop the timer before we leave */
if (!nowayout)
tco_timer_stop();
/* Deregister */
misc_deregister(&sp5100_tco_miscdev);
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
if (resbase_phys)
release_resource(&wdt_res);
release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}
static int sp5100_tco_remove(struct platform_device *dev)
{
if (tcobase)
sp5100_tco_cleanup();
return 0;
}
static void sp5100_tco_shutdown(struct platform_device *dev)
{
tco_timer_stop();
}
static struct platform_driver sp5100_tco_driver = {
.probe = sp5100_tco_init,
.remove = sp5100_tco_remove,
.shutdown = sp5100_tco_shutdown,
.driver = {
.owner = THIS_MODULE,
.name = TCO_MODULE_NAME,
},
};
static int __init sp5100_tco_init_module(void)
{
int err;
pr_info("SP5100/SB800 TCO WatchDog Timer Driver v%s\n", TCO_VERSION);
err = platform_driver_register(&sp5100_tco_driver);
if (err)
return err;
sp5100_tco_platform_device = platform_device_register_simple(
TCO_MODULE_NAME, -1, NULL, 0);
if (IS_ERR(sp5100_tco_platform_device)) {
err = PTR_ERR(sp5100_tco_platform_device);
goto unreg_platform_driver;
}
return 0;
unreg_platform_driver:
platform_driver_unregister(&sp5100_tco_driver);
return err;
}
static void __exit sp5100_tco_cleanup_module(void)
{
platform_device_unregister(sp5100_tco_platform_device);
platform_driver_unregister(&sp5100_tco_driver);
pr_info("SP5100/SB800 TCO Watchdog Module Unloaded\n");
}
module_init(sp5100_tco_init_module);
module_exit(sp5100_tco_cleanup_module);
MODULE_AUTHOR("Priyanka Gupta");
MODULE_DESCRIPTION("TCO timer driver for SP5100/SB800 chipset");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);