linux/arch/powerpc/boot/dts/gef_sbc610.dts
Kumar Gala f706bed114 powerpc/fsl: update compatiable on fsl 16550 uart nodes
The Freescale serial port's are pretty much a 16550, however there are
some FSL specific bugs and features.  Add a "fsl,ns16550" compatiable
string to allow code to handle those FSL specific issues.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04 15:38:40 -06:00

426 lines
9.4 KiB
Plaintext

/*
* GE SBC610 Device Tree Source
*
* Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Based on: SBS CM6 Device Tree Source
* Copyright 2007 SBS Technologies GmbH & Co. KG
* And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
* Copyright 2006 Freescale Semiconductor Inc.
*/
/*
* Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
*/
/dts-v1/;
/ {
model = "GEF_SBC610";
compatible = "gef,sbc610";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8641@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <32768>; // L1, 32K
i-cache-size = <32768>; // L1, 32K
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
PowerPC,8641@1 {
device_type = "cpu";
reg = <1>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <32768>; // L1, 32K
i-cache-size = <32768>; // L1, 32K
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
};
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>; // set by uboot
};
localbus@fef05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8641-localbus", "simple-bus";
reg = <0xfef05000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash
1 0 0xe8000000 0x08000000 // Paged Flash 0
2 0 0xe0000000 0x08000000 // Paged Flash 1
3 0 0xfc100000 0x00020000 // NVRAM
4 0 0xfc000000 0x00008000 // FPGA
5 0 0xfc008000 0x00008000 // AFIX FPGA
6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
/* flash@0,0 is a mirror of part of the memory in flash@1,0
flash@0,0 {
compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <4>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "firmware";
reg = <0x0 0x1000000>;
read-only;
};
};
*/
flash@1,0 {
compatible = "gef,sbc610-paged-flash", "cfi-flash";
reg = <0x1 0x0 0x8000000>;
bank-width = <4>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "user";
reg = <0x0 0x7800000>;
};
partition@7800000 {
label = "firmware";
reg = <0x7800000 0x800000>;
read-only;
};
};
nvram@3,0 {
device_type = "nvram";
compatible = "simtek,stk14ca8";
reg = <0x3 0x0 0x20000>;
};
fpga@4,0 {
compatible = "gef,fpga-regs";
reg = <0x4 0x0 0x40>;
};
wdt@4,2000 {
compatible = "gef,fpga-wdt";
reg = <0x4 0x2000 0x8>;
interrupts = <0x1a 0x4>;
interrupt-parent = <&gef_pic>;
};
/* Second watchdog available, driver currently supports one.
wdt@4,2010 {
compatible = "gef,fpga-wdt";
reg = <0x4 0x2010 0x8>;
interrupts = <0x1b 0x4>;
interrupt-parent = <&gef_pic>;
};
*/
gef_pic: pic@4,4000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "gef,fpga-pic";
reg = <0x4 0x4000 0x20>;
interrupts = <0x8
0x9>;
interrupt-parent = <&mpic>;
};
gef_gpio: gpio@7,14000 {
#gpio-cells = <2>;
compatible = "gef,sbc610-gpio";
reg = <0x7 0x14000 0x24>;
gpio-controller;
};
};
soc@fef00000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
bus-frequency = <33333333>;
mcm-law@0 {
compatible = "fsl,mcm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
mcm@1000 {
compatible = "fsl,mpc8641-mcm", "fsl,mcm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
i2c1: i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
hwmon@48 {
compatible = "national,lm92";
reg = <0x48>;
};
hwmon@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
rtc@51 {
compatible = "epson,rx8581";
reg = <0x00000051>;
};
eti@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
};
};
i2c2: i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8641-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <0x2a 0x2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <0x1c 0x2>;
interrupt-parent = <&mpic>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
msi@41600 {
compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 {
compatible = "fsl,mpc8641-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
pci0: pcie@fef08000 {
compatible = "fsl,mpc8641-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xfef08000 0x1000>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <0x18 0x2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0 0 0 0 0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0x80000000
0x02000000 0x0 0x80000000
0x0 0x40000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00400000>;
};
};
};