linux/arch/arm/mach-omap1/devices.c
Linus Walleij c729baa860 ARM: omap1: Exorcise the legacy GPIO header
After fixing all the offending users referencing the global GPIO
numberspace in OMAP1, a few sites still remain including the
legacy <linus/gpio.h> header for no reason.

Delete the last remaining users, and OMAP1 is free from legacy
GPIO dependencies.

Fixes: 92bf78b33b ("gpio: omap: use dynamic allocation of base")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-05-24 15:01:53 +02:00

364 lines
8.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* linux/arch/arm/mach-omap1/devices.c
*
* OMAP1 platform device setup/initialization
*/
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/omap-wd-timer.h>
#include <linux/soc/ti/omap1-io.h>
#include <asm/mach/map.h>
#include "tc.h"
#include "mux.h"
#include "hardware.h"
#include "common.h"
#include "clock.h"
#include "mmc.h"
#include "sram.h"
#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
#define OMAP_RTC_BASE 0xfffb4800
static struct resource rtc_resources[] = {
{
.start = OMAP_RTC_BASE,
.end = OMAP_RTC_BASE + 0x5f,
.flags = IORESOURCE_MEM,
},
{
.start = INT_RTC_TIMER,
.flags = IORESOURCE_IRQ,
},
{
.start = INT_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device omap_rtc_device = {
.name = "omap_rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static void omap_init_rtc(void)
{
(void) platform_device_register(&omap_rtc_device);
}
#else
static inline void omap_init_rtc(void) {}
#endif
/*-------------------------------------------------------------------------*/
#if IS_ENABLED(CONFIG_MMC_OMAP)
static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
if (controller_nr == 0) {
omap_cfg_reg(MMC_CMD);
omap_cfg_reg(MMC_CLK);
omap_cfg_reg(MMC_DAT0);
if (cpu_is_omap1710()) {
omap_cfg_reg(M15_1710_MMC_CLKI);
omap_cfg_reg(P19_1710_MMC_CMDDIR);
omap_cfg_reg(P20_1710_MMC_DATDIR0);
}
if (mmc_controller->slots[0].wires == 4) {
omap_cfg_reg(MMC_DAT1);
/* NOTE: DAT2 can be on W10 (here) or M15 */
if (!mmc_controller->slots[0].nomux)
omap_cfg_reg(MMC_DAT2);
omap_cfg_reg(MMC_DAT3);
}
}
/* Block 2 is on newer chips, and has many pinout options */
if (cpu_is_omap16xx() && controller_nr == 1) {
if (!mmc_controller->slots[1].nomux) {
omap_cfg_reg(Y8_1610_MMC2_CMD);
omap_cfg_reg(Y10_1610_MMC2_CLK);
omap_cfg_reg(R18_1610_MMC2_CLKIN);
omap_cfg_reg(W8_1610_MMC2_DAT0);
if (mmc_controller->slots[1].wires == 4) {
omap_cfg_reg(V8_1610_MMC2_DAT1);
omap_cfg_reg(W15_1610_MMC2_DAT2);
omap_cfg_reg(R10_1610_MMC2_DAT3);
}
/* These are needed for the level shifter */
omap_cfg_reg(V9_1610_MMC2_CMDDIR);
omap_cfg_reg(V5_1610_MMC2_DATDIR0);
omap_cfg_reg(W19_1610_MMC2_DATDIR1);
}
/* Feedback clock must be set on OMAP-1710 MMC2 */
if (cpu_is_omap1710())
omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
MOD_CONF_CTRL_1);
}
}
#define OMAP_MMC_NR_RES 4
/*
* Register MMC devices.
*/
static int __init omap_mmc_add(const char *name, int id, unsigned long base,
unsigned long size, unsigned int irq,
unsigned rx_req, unsigned tx_req,
struct omap_mmc_platform_data *data)
{
struct platform_device *pdev;
struct resource res[OMAP_MMC_NR_RES];
int ret;
pdev = platform_device_alloc(name, id);
if (!pdev)
return -ENOMEM;
memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
res[0].start = base;
res[0].end = base + size - 1;
res[0].flags = IORESOURCE_MEM;
res[1].start = res[1].end = irq;
res[1].flags = IORESOURCE_IRQ;
res[2].start = rx_req;
res[2].name = "rx";
res[2].flags = IORESOURCE_DMA;
res[3].start = tx_req;
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
if (cpu_is_omap15xx())
data->slots[0].features = MMC_OMAP15XX;
if (cpu_is_omap16xx())
data->slots[0].features = MMC_OMAP16XX;
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
if (ret)
goto fail;
ret = platform_device_add(pdev);
if (ret)
goto fail;
/* return device handle to board setup code */
data->dev = &pdev->dev;
return 0;
fail:
platform_device_put(pdev);
return ret;
}
void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
int i;
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
unsigned rx_req, tx_req;
unsigned int irq = 0;
if (!mmc_data[i])
continue;
omap1_mmc_mux(mmc_data[i], i);
switch (i) {
case 0:
base = OMAP1_MMC1_BASE;
irq = INT_MMC;
rx_req = 22;
tx_req = 21;
break;
case 1:
if (!cpu_is_omap16xx())
return;
base = OMAP1_MMC2_BASE;
irq = INT_1610_MMC2;
rx_req = 55;
tx_req = 54;
break;
default:
continue;
}
size = OMAP1_MMC_SIZE;
omap_mmc_add("mmci-omap", i, base, size, irq,
rx_req, tx_req, mmc_data[i]);
}
}
#endif
/*-------------------------------------------------------------------------*/
/* Numbering for the SPI-capable controllers when used for SPI:
* spi = 1
* uwire = 2
* mmc1..2 = 3..4
* mcbsp1..3 = 5..7
*/
#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
#define OMAP_UWIRE_BASE 0xfffb3000
static struct resource uwire_resources[] = {
{
.start = OMAP_UWIRE_BASE,
.end = OMAP_UWIRE_BASE + 0x20,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_uwire_device = {
.name = "omap_uwire",
.id = -1,
.num_resources = ARRAY_SIZE(uwire_resources),
.resource = uwire_resources,
};
static void omap_init_uwire(void)
{
/* FIXME define and use a boot tag; not all boards will be hooking
* up devices to the microwire controller, and multi-board configs
* mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
*/
/* board-specific code must configure chipselects (only a few
* are normally used) and SCLK/SDI/SDO (each has two choices).
*/
(void) platform_device_register(&omap_uwire_device);
}
#else
static inline void omap_init_uwire(void) {}
#endif
#define OMAP1_RNG_BASE 0xfffe5000
static struct resource omap1_rng_resources[] = {
{
.start = OMAP1_RNG_BASE,
.end = OMAP1_RNG_BASE + 0x4f,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap1_rng_device = {
.name = "omap_rng",
.id = -1,
.num_resources = ARRAY_SIZE(omap1_rng_resources),
.resource = omap1_rng_resources,
};
static void omap1_init_rng(void)
{
if (!cpu_is_omap16xx())
return;
(void) platform_device_register(&omap1_rng_device);
}
/*-------------------------------------------------------------------------*/
/*
* This gets called after board-specific INIT_MACHINE, and initializes most
* on-chip peripherals accessible on this board (except for few like USB):
*
* (a) Does any "standard config" pin muxing needed. Board-specific
* code will have muxed GPIO pins and done "nonstandard" setup;
* that code could live in the boot loader.
* (b) Populating board-specific platform_data with the data drivers
* rely on to handle wiring variations.
* (c) Creating platform devices as meaningful on this board and
* with this kernel configuration.
*
* Claiming GPIOs, and setting their direction and initial values, is the
* responsibility of the device drivers. So is responding to probe().
*
* Board-specific knowledge like creating devices or pin setup is to be
* kept out of drivers as much as possible. In particular, pin setup
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
*/
static int __init omap1_init_devices(void)
{
if (!cpu_class_is_omap1())
return -ENODEV;
omap1_sram_init();
omap1_clk_late_init();
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_rtc();
omap_init_uwire();
omap1_init_rng();
return 0;
}
arch_initcall(omap1_init_devices);
#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
static struct resource wdt_resources[] = {
{
.start = 0xfffeb000,
.end = 0xfffeb07F,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device omap_wdt_device = {
.name = "omap_wdt",
.id = -1,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
static int __init omap_init_wdt(void)
{
struct omap_wd_timer_platform_data pdata;
int ret;
if (!cpu_is_omap16xx())
return -ENODEV;
pdata.read_reset_sources = omap1_get_reset_sources;
ret = platform_device_register(&omap_wdt_device);
if (!ret) {
ret = platform_device_add_data(&omap_wdt_device, &pdata,
sizeof(pdata));
if (ret)
platform_device_del(&omap_wdt_device);
}
return ret;
}
subsys_initcall(omap_init_wdt);
#endif