Hauke Mehrtens 0a64baea48 b43: use bcma_chipco_gpio_control() ... With this patch the same registers are written, but this access is now protected by a lock. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2013-03-25 16:43:41 -04:00
..
b43.h	b43: define BCMA wireless specific PLLs	2013-03-06 16:25:47 -05:00
bus.c	bcma: add boardinfo struct	2012-05-16 12:45:21 -04:00
bus.h
debugfs.c	simple_open: automatically convert to simple_open()	2012-04-05 15:25:50 -07:00
debugfs.h
dma.c	b43: fix tx path skb leaks	2012-12-10 15:49:59 -05:00
dma.h	b43: Increase number of RX DMA slots	2013-02-19 00:51:08 -05:00
Kconfig	b43: HT-PHY: make it BCMA-only	2013-03-06 16:28:59 -05:00
leds.c	net: fix assignment of 0/1 to bool variables.	2011-12-19 22:27:29 -05:00
leds.h
lo.c	net: fix assignment of 0/1 to bool variables.	2011-12-19 22:27:29 -05:00
lo.h
main.c	b43: use bcma_chipco_gpio_control()	2013-03-25 16:43:41 -04:00
main.h	b43: Fix firmware loading when driver is built into the kernel	2013-01-07 14:34:45 -05:00
Makefile	b43: N-PHY: init 0x2057 radio	2012-08-06 14:56:35 -04:00
pcmcia.c	b43: remove __dev* attributes	2012-12-06 15:04:56 -05:00
pcmcia.h
phy_a.c
phy_a.h
phy_common.c	b43: add helper waiting for given value in radio reg	2012-08-06 14:56:35 -04:00
phy_common.h	b43: add helper waiting for given value in radio reg	2012-08-06 14:56:35 -04:00
phy_g.c	net: fix assignment of 0/1 to bool variables.	2011-12-19 22:27:29 -05:00
phy_g.h
phy_ht.c	b43: HT-PHY: enable basic TX power setup	2013-03-13 14:27:53 -04:00
phy_ht.h	b43: HT-PHY: setup TX power control	2013-03-13 14:27:52 -04:00
phy_lcn.c
phy_lcn.h
phy_lp.c	net: fix assignment of 0/1 to bool variables.	2011-12-19 22:27:29 -05:00
phy_lp.h
phy_n.c	b43: N-PHY: fix 0x2057 radio calib copy/paste mistake	2012-08-10 15:27:01 -04:00
phy_n.h	b43: N-PHY: finish 0x2056 radio setup	2012-08-06 14:56:35 -04:00
pio.c	b43: fix tx path skb leaks	2012-12-10 15:49:59 -05:00
pio.h
radio_2055.c
radio_2055.h
radio_2056.c	b43: N-PHY: finish 2.4GHz 0x2056 radio setup	2011-12-13 15:33:56 -05:00
radio_2056.h	b43: N-PHY: finish 2.4GHz 0x2056 radio setup	2011-12-13 15:33:56 -05:00
radio_2057.c	b43: N-PHY: init 0x2057 radio	2012-08-06 14:56:35 -04:00
radio_2057.h	b43: N-PHY: init 0x2057 radio	2012-08-06 14:56:35 -04:00
radio_2059.c
radio_2059.h
rfkill.c
rfkill.h
sdio.c	b43: remove __dev* attributes	2012-12-06 15:04:56 -05:00
sdio.h
sysfs.c
sysfs.h
tables.c
tables.h
tables_lpphy.c
tables_lpphy.h
tables_nphy.c	b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent()	2013-01-22 16:01:29 -05:00
tables_nphy.h	b43: N-PHY: add overriding RF control for rev7+	2012-08-06 15:01:56 -04:00
tables_phy_ht.c
tables_phy_ht.h
tables_phy_lcn.c
tables_phy_lcn.h
wa.c
wa.h
xmit.c	mac80211: support RX_FLAG_MACTIME_END	2012-11-13 21:43:55 +01:00
xmit.h	b43: HT-PHY: report signal to mac80211	2011-11-07 13:19:12 -05:00