linux/drivers/net/wimax/i2400m/i2400m-sdio.h
Cindy H Kao f22cf689a6 wimax/i2400m: fix the race condition for accessing TX queue
The race condition happens when the TX queue is accessed by
the TX work while the same TX queue is being destroyed because
a bus reset is triggered either by debugfs entry or simply
by failing waking up the device from WiMAX IDLE mode.

This fix is to prevent the TX queue from being accessed by
multiple threads

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
2010-05-11 14:04:46 -07:00

159 lines
5.5 KiB
C

/*
* Intel Wireless WiMAX Connection 2400m
* SDIO-specific i2400m driver definitions
*
*
* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* Intel Corporation <linux-wimax@intel.com>
* Brian Bian <brian.bian@intel.com>
* Dirk Brandewie <dirk.j.brandewie@intel.com>
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
* Yanir Lubetkin <yanirx.lubetkin@intel.com>
* - Initial implementation
*
*
* This driver implements the bus-specific part of the i2400m for
* SDIO. Check i2400m.h for a generic driver description.
*
* ARCHITECTURE
*
* This driver sits under the bus-generic i2400m driver, providing the
* connection to the device.
*
* When probed, all the function pointers are setup and then the
* bus-generic code called. The generic driver will then use the
* provided pointers for uploading firmware (i2400ms_bus_bm*() in
* sdio-fw.c) and then setting up the device (i2400ms_dev_*() in
* sdio.c).
*
* Once firmware is uploaded, TX functions (sdio-tx.c) are called when
* data is ready for transmission in the TX fifo; then the SDIO IRQ is
* fired and data is available (sdio-rx.c), it is sent to the generic
* driver for processing with i2400m_rx.
*/
#ifndef __I2400M_SDIO_H__
#define __I2400M_SDIO_H__
#include "i2400m.h"
/* Host-Device interface for SDIO */
enum {
I2400M_SDIO_BOOT_RETRIES = 3,
I2400MS_BLK_SIZE = 256,
I2400MS_PL_SIZE_MAX = 0x3E00,
I2400MS_DATA_ADDR = 0x0,
I2400MS_INTR_STATUS_ADDR = 0x13,
I2400MS_INTR_CLEAR_ADDR = 0x13,
I2400MS_INTR_ENABLE_ADDR = 0x14,
I2400MS_INTR_GET_SIZE_ADDR = 0x2C,
/* The number of ticks to wait for the device to signal that
* it is ready */
I2400MS_INIT_SLEEP_INTERVAL = 100,
/* How long to wait for the device to settle after reset */
I2400MS_SETTLE_TIME = 40,
/* The number of msec to wait for IOR after sending IOE */
IWMC3200_IOR_TIMEOUT = 10,
};
/**
* struct i2400ms - descriptor for a SDIO connected i2400m
*
* @i2400m: bus-generic i2400m implementation; has to be first (see
* it's documentation in i2400m.h).
*
* @func: pointer to our SDIO function
*
* @tx_worker: workqueue struct used to TX data when the bus-generic
* code signals packets are pending for transmission to the device.
*
* @tx_workqueue: workqeueue used for data TX; we don't use the
* system's workqueue as that might cause deadlocks with code in
* the bus-generic driver. The read/write operation to the queue
* is protected with spinlock (tx_lock in struct i2400m) to avoid
* the queue being destroyed in the middle of a the queue read/write
* operation.
*
* @debugfs_dentry: dentry for the SDIO specific debugfs files
*
* Note this value is set to NULL upon destruction; this is
* because some routinges use it to determine if we are inside the
* probe() path or some other path. When debugfs is disabled,
* creation sets the dentry to '(void*) -ENODEV', which is valid
* for the test.
*/
struct i2400ms {
struct i2400m i2400m; /* FIRST! See doc */
struct sdio_func *func;
struct work_struct tx_worker;
struct workqueue_struct *tx_workqueue;
char tx_wq_name[32];
struct dentry *debugfs_dentry;
wait_queue_head_t bm_wfa_wq;
int bm_wait_result;
size_t bm_ack_size;
/* Device is any of the iwmc3200 SKUs */
unsigned iwmc3200:1;
};
static inline
void i2400ms_init(struct i2400ms *i2400ms)
{
i2400m_init(&i2400ms->i2400m);
}
extern int i2400ms_rx_setup(struct i2400ms *);
extern void i2400ms_rx_release(struct i2400ms *);
extern ssize_t __i2400ms_rx_get_size(struct i2400ms *);
extern int i2400ms_tx_setup(struct i2400ms *);
extern void i2400ms_tx_release(struct i2400ms *);
extern void i2400ms_bus_tx_kick(struct i2400m *);
extern ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *,
const struct i2400m_bootrom_header *,
size_t, int);
extern ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *,
struct i2400m_bootrom_header *,
size_t);
extern void i2400ms_bus_bm_release(struct i2400m *);
extern int i2400ms_bus_bm_setup(struct i2400m *);
#endif /* #ifndef __I2400M_SDIO_H__ */