linux/drivers/hwmon/ad7418.c
Stephen Kitt 6748703856 hwmon: use simple i2c probe function
Many hwmon drivers don't use the id information provided by the old
i2c probe function, and the remainder can easily be adapted to the new
form ("probe_new") by calling i2c_match_id explicitly.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

A few drivers aren't included in this patch because they have a
different set of maintainers. They will be covered by other patches.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200813160222.1503401-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-09-23 09:42:39 -07:00

319 lines
7.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* An hwmon driver for the Analog Devices AD7416/17/18
* Copyright (C) 2006-07 Tower Technologies
*
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* Based on lm75.c
* Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include "lm75.h"
#define DRV_VERSION "0.4"
enum chips { ad7416, ad7417, ad7418 };
/* AD7418 registers */
#define AD7418_REG_TEMP_IN 0x00
#define AD7418_REG_CONF 0x01
#define AD7418_REG_TEMP_HYST 0x02
#define AD7418_REG_TEMP_OS 0x03
#define AD7418_REG_ADC 0x04
#define AD7418_REG_CONF2 0x05
#define AD7418_REG_ADC_CH(x) ((x) << 5)
#define AD7418_CH_TEMP AD7418_REG_ADC_CH(0)
static const u8 AD7418_REG_TEMP[] = { AD7418_REG_TEMP_IN,
AD7418_REG_TEMP_HYST,
AD7418_REG_TEMP_OS };
struct ad7418_data {
struct i2c_client *client;
enum chips type;
struct mutex lock;
int adc_max; /* number of ADC channels */
char valid;
unsigned long last_updated; /* In jiffies */
s16 temp[3]; /* Register values */
u16 in[4];
};
static int ad7418_update_device(struct device *dev)
{
struct ad7418_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
s32 val;
mutex_lock(&data->lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
u8 cfg;
int i, ch;
/* read config register and clear channel bits */
val = i2c_smbus_read_byte_data(client, AD7418_REG_CONF);
if (val < 0)
goto abort;
cfg = val;
cfg &= 0x1F;
val = i2c_smbus_write_byte_data(client, AD7418_REG_CONF,
cfg | AD7418_CH_TEMP);
if (val < 0)
goto abort;
udelay(30);
for (i = 0; i < 3; i++) {
val = i2c_smbus_read_word_swapped(client,
AD7418_REG_TEMP[i]);
if (val < 0)
goto abort;
data->temp[i] = val;
}
for (i = 0, ch = 4; i < data->adc_max; i++, ch--) {
val = i2c_smbus_write_byte_data(client, AD7418_REG_CONF,
cfg | AD7418_REG_ADC_CH(ch));
if (val < 0)
goto abort;
udelay(15);
val = i2c_smbus_read_word_swapped(client,
AD7418_REG_ADC);
if (val < 0)
goto abort;
data->in[data->adc_max - 1 - i] = val;
}
/* restore old configuration value */
val = i2c_smbus_write_word_swapped(client, AD7418_REG_CONF,
cfg);
if (val < 0)
goto abort;
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->lock);
return 0;
abort:
data->valid = 0;
mutex_unlock(&data->lock);
return val;
}
static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct ad7418_data *data = dev_get_drvdata(dev);
int ret;
ret = ad7418_update_device(dev);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n",
LM75_TEMP_FROM_REG(data->temp[attr->index]));
}
static ssize_t adc_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct ad7418_data *data = dev_get_drvdata(dev);
int ret;
ret = ad7418_update_device(dev);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n",
((data->in[attr->index] >> 6) * 2500 + 512) / 1024);
}
static ssize_t temp_store(struct device *dev,
struct device_attribute *devattr, const char *buf,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct ad7418_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
long temp;
int ret = kstrtol(buf, 10, &temp);
if (ret < 0)
return ret;
mutex_lock(&data->lock);
data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
i2c_smbus_write_word_swapped(client,
AD7418_REG_TEMP[attr->index],
data->temp[attr->index]);
mutex_unlock(&data->lock);
return count;
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp, 1);
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 2);
static SENSOR_DEVICE_ATTR_RO(in1_input, adc, 0);
static SENSOR_DEVICE_ATTR_RO(in2_input, adc, 1);
static SENSOR_DEVICE_ATTR_RO(in3_input, adc, 2);
static SENSOR_DEVICE_ATTR_RO(in4_input, adc, 3);
static struct attribute *ad7416_attrs[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(ad7416);
static struct attribute *ad7417_attrs[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in4_input.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(ad7417);
static struct attribute *ad7418_attrs[] = {
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
NULL
};
ATTRIBUTE_GROUPS(ad7418);
static void ad7418_init_client(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
int reg = i2c_smbus_read_byte_data(client, AD7418_REG_CONF);
if (reg < 0) {
dev_err(&client->dev, "cannot read configuration register\n");
} else {
dev_info(&client->dev, "configuring for mode 1\n");
i2c_smbus_write_byte_data(client, AD7418_REG_CONF, reg & 0xfe);
if (data->type == ad7417 || data->type == ad7418)
i2c_smbus_write_byte_data(client,
AD7418_REG_CONF2, 0x00);
}
}
static const struct i2c_device_id ad7418_id[];
static int ad7418_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct i2c_adapter *adapter = client->adapter;
struct ad7418_data *data;
struct device *hwmon_dev;
const struct attribute_group **attr_groups = NULL;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
data = devm_kzalloc(dev, sizeof(struct ad7418_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->lock);
data->client = client;
if (dev->of_node)
data->type = (enum chips)of_device_get_match_data(dev);
else
data->type = i2c_match_id(ad7418_id, client)->driver_data;
switch (data->type) {
case ad7416:
data->adc_max = 0;
attr_groups = ad7416_groups;
break;
case ad7417:
data->adc_max = 4;
attr_groups = ad7417_groups;
break;
case ad7418:
data->adc_max = 1;
attr_groups = ad7418_groups;
break;
}
dev_info(dev, "%s chip found\n", client->name);
/* Initialize the AD7418 chip */
ad7418_init_client(client);
hwmon_dev = devm_hwmon_device_register_with_groups(dev,
client->name,
data, attr_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id ad7418_id[] = {
{ "ad7416", ad7416 },
{ "ad7417", ad7417 },
{ "ad7418", ad7418 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ad7418_id);
static const struct of_device_id ad7418_dt_ids[] = {
{ .compatible = "adi,ad7416", .data = (void *)ad7416, },
{ .compatible = "adi,ad7417", .data = (void *)ad7417, },
{ .compatible = "adi,ad7418", .data = (void *)ad7418, },
{ }
};
MODULE_DEVICE_TABLE(of, ad7418_dt_ids);
static struct i2c_driver ad7418_driver = {
.driver = {
.name = "ad7418",
.of_match_table = ad7418_dt_ids,
},
.probe_new = ad7418_probe,
.id_table = ad7418_id,
};
module_i2c_driver(ad7418_driver);
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("AD7416/17/18 driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);