linux/arch/powerpc/mm/hugetlbpage-hash64.c
Aneesh Kumar K.V 5524a27d39 powerpc/mm: Convert virtual address to vpn
This patch convert different functions to take virtual page number
instead of virtual address. Virtual page number is virtual address
shifted right by VPN_SHIFT (12) bits. This enable us to have an
address range of upto 76 bits.

Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-17 16:31:49 +10:00

145 lines
4.1 KiB
C

/*
* PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
*
* Copyright (C) 2003 David Gibson, IBM Corporation.
*
* Based on the IA-32 version:
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
*/
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/machdep.h>
int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
pte_t *ptep, unsigned long trap, int local, int ssize,
unsigned int shift, unsigned int mmu_psize)
{
unsigned long vpn;
unsigned long old_pte, new_pte;
unsigned long rflags, pa, sz;
long slot;
BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
/* Search the Linux page table for a match with va */
vpn = hpt_vpn(ea, vsid, ssize);
/* At this point, we have a pte (old_pte) which can be used to build
* or update an HPTE. There are 2 cases:
*
* 1. There is a valid (present) pte with no associated HPTE (this is
* the most common case)
* 2. There is a valid (present) pte with an associated HPTE. The
* current values of the pp bits in the HPTE prevent access
* because we are doing software DIRTY bit management and the
* page is currently not DIRTY.
*/
do {
old_pte = pte_val(*ptep);
/* If PTE busy, retry the access */
if (unlikely(old_pte & _PAGE_BUSY))
return 0;
/* If PTE permissions don't match, take page fault */
if (unlikely(access & ~old_pte))
return 1;
/* Try to lock the PTE, add ACCESSED and DIRTY if it was
* a write access */
new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
if (access & _PAGE_RW)
new_pte |= _PAGE_DIRTY;
} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
old_pte, new_pte));
rflags = 0x2 | (!(new_pte & _PAGE_RW));
/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
sz = ((1UL) << shift);
if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
/* No CPU has hugepages but lacks no execute, so we
* don't need to worry about that case */
rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
/* Check if pte already has an hpte (case 2) */
if (unlikely(old_pte & _PAGE_HASHPTE)) {
/* There MIGHT be an HPTE for this pte */
unsigned long hash, slot;
hash = hpt_hash(vpn, shift, ssize);
if (old_pte & _PAGE_F_SECOND)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += (old_pte & _PAGE_F_GIX) >> 12;
if (ppc_md.hpte_updatepp(slot, rflags, vpn, mmu_psize,
ssize, local) == -1)
old_pte &= ~_PAGE_HPTEFLAGS;
}
if (likely(!(old_pte & _PAGE_HASHPTE))) {
unsigned long hash = hpt_hash(vpn, shift, ssize);
unsigned long hpte_group;
pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
repeat:
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
/* clear HPTE slot informations in new PTE */
#ifdef CONFIG_PPC_64K_PAGES
new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
#else
new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
#endif
/* Add in WIMG bits */
rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
_PAGE_COHERENT | _PAGE_GUARDED));
/* Insert into the hash table, primary slot */
slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
mmu_psize, ssize);
/* Primary is full, try the secondary */
if (unlikely(slot == -1)) {
hpte_group = ((~hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags,
HPTE_V_SECONDARY,
mmu_psize, ssize);
if (slot == -1) {
if (mftb() & 0x1)
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP)&~0x7UL;
ppc_md.hpte_remove(hpte_group);
goto repeat;
}
}
/*
* Hypervisor failure. Restore old pte and return -1
* similar to __hash_page_*
*/
if (unlikely(slot == -2)) {
*ptep = __pte(old_pte);
hash_failure_debug(ea, access, vsid, trap, ssize,
mmu_psize, old_pte);
return -1;
}
new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
}
/*
* No need to use ldarx/stdcx here
*/
*ptep = __pte(new_pte & ~_PAGE_BUSY);
return 0;
}