linux/fs/btrfs/lzo.c
David Sterba 8ab546bb30 btrfs: disable allocation warnings for compression workspaces
The workspaces for compression are typically much larger than a page and
for high zstd levels in the range of megabytes. There's a fallback to
vmalloc but this can still fail (see the report).

Some of the workspaces are preallocated at module load time so we have a
safe fallback, otherwise when a new workspace is needed it's allocated
but if this fails then the process waits. Which means the warning is
only causing noise and we can use the GFP flag to disable it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217466
Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-19 13:59:34 +02:00

494 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2008 Oracle. All rights reserved.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/pagemap.h>
#include <linux/bio.h>
#include <linux/lzo.h>
#include <linux/refcount.h>
#include "messages.h"
#include "compression.h"
#include "ctree.h"
#include "super.h"
#include "btrfs_inode.h"
#define LZO_LEN 4
/*
* Btrfs LZO compression format
*
* Regular and inlined LZO compressed data extents consist of:
*
* 1. Header
* Fixed size. LZO_LEN (4) bytes long, LE32.
* Records the total size (including the header) of compressed data.
*
* 2. Segment(s)
* Variable size. Each segment includes one segment header, followed by data
* payload.
* One regular LZO compressed extent can have one or more segments.
* For inlined LZO compressed extent, only one segment is allowed.
* One segment represents at most one sector of uncompressed data.
*
* 2.1 Segment header
* Fixed size. LZO_LEN (4) bytes long, LE32.
* Records the total size of the segment (not including the header).
* Segment header never crosses sector boundary, thus it's possible to
* have at most 3 padding zeros at the end of the sector.
*
* 2.2 Data Payload
* Variable size. Size up limit should be lzo1x_worst_compress(sectorsize)
* which is 4419 for a 4KiB sectorsize.
*
* Example with 4K sectorsize:
* Page 1:
* 0 0x2 0x4 0x6 0x8 0xa 0xc 0xe 0x10
* 0x0000 | Header | SegHdr 01 | Data payload 01 ... |
* ...
* 0x0ff0 | SegHdr N | Data payload N ... |00|
* ^^ padding zeros
* Page 2:
* 0x1000 | SegHdr N+1| Data payload N+1 ... |
*/
#define WORKSPACE_BUF_LENGTH (lzo1x_worst_compress(PAGE_SIZE))
#define WORKSPACE_CBUF_LENGTH (lzo1x_worst_compress(PAGE_SIZE))
struct workspace {
void *mem;
void *buf; /* where decompressed data goes */
void *cbuf; /* where compressed data goes */
struct list_head list;
};
static struct workspace_manager wsm;
void lzo_free_workspace(struct list_head *ws)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
kvfree(workspace->buf);
kvfree(workspace->cbuf);
kvfree(workspace->mem);
kfree(workspace);
}
struct list_head *lzo_alloc_workspace(unsigned int level)
{
struct workspace *workspace;
workspace = kzalloc(sizeof(*workspace), GFP_KERNEL);
if (!workspace)
return ERR_PTR(-ENOMEM);
workspace->mem = kvmalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL | __GFP_NOWARN);
workspace->buf = kvmalloc(WORKSPACE_BUF_LENGTH, GFP_KERNEL | __GFP_NOWARN);
workspace->cbuf = kvmalloc(WORKSPACE_CBUF_LENGTH, GFP_KERNEL | __GFP_NOWARN);
if (!workspace->mem || !workspace->buf || !workspace->cbuf)
goto fail;
INIT_LIST_HEAD(&workspace->list);
return &workspace->list;
fail:
lzo_free_workspace(&workspace->list);
return ERR_PTR(-ENOMEM);
}
static inline void write_compress_length(char *buf, size_t len)
{
__le32 dlen;
dlen = cpu_to_le32(len);
memcpy(buf, &dlen, LZO_LEN);
}
static inline size_t read_compress_length(const char *buf)
{
__le32 dlen;
memcpy(&dlen, buf, LZO_LEN);
return le32_to_cpu(dlen);
}
/*
* Will do:
*
* - Write a segment header into the destination
* - Copy the compressed buffer into the destination
* - Make sure we have enough space in the last sector to fit a segment header
* If not, we will pad at most (LZO_LEN (4)) - 1 bytes of zeros.
*
* Will allocate new pages when needed.
*/
static int copy_compressed_data_to_page(char *compressed_data,
size_t compressed_size,
struct page **out_pages,
unsigned long max_nr_page,
u32 *cur_out,
const u32 sectorsize)
{
u32 sector_bytes_left;
u32 orig_out;
struct page *cur_page;
char *kaddr;
if ((*cur_out / PAGE_SIZE) >= max_nr_page)
return -E2BIG;
/*
* We never allow a segment header crossing sector boundary, previous
* run should ensure we have enough space left inside the sector.
*/
ASSERT((*cur_out / sectorsize) == (*cur_out + LZO_LEN - 1) / sectorsize);
cur_page = out_pages[*cur_out / PAGE_SIZE];
/* Allocate a new page */
if (!cur_page) {
cur_page = alloc_page(GFP_NOFS);
if (!cur_page)
return -ENOMEM;
out_pages[*cur_out / PAGE_SIZE] = cur_page;
}
kaddr = kmap_local_page(cur_page);
write_compress_length(kaddr + offset_in_page(*cur_out),
compressed_size);
*cur_out += LZO_LEN;
orig_out = *cur_out;
/* Copy compressed data */
while (*cur_out - orig_out < compressed_size) {
u32 copy_len = min_t(u32, sectorsize - *cur_out % sectorsize,
orig_out + compressed_size - *cur_out);
kunmap_local(kaddr);
if ((*cur_out / PAGE_SIZE) >= max_nr_page)
return -E2BIG;
cur_page = out_pages[*cur_out / PAGE_SIZE];
/* Allocate a new page */
if (!cur_page) {
cur_page = alloc_page(GFP_NOFS);
if (!cur_page)
return -ENOMEM;
out_pages[*cur_out / PAGE_SIZE] = cur_page;
}
kaddr = kmap_local_page(cur_page);
memcpy(kaddr + offset_in_page(*cur_out),
compressed_data + *cur_out - orig_out, copy_len);
*cur_out += copy_len;
}
/*
* Check if we can fit the next segment header into the remaining space
* of the sector.
*/
sector_bytes_left = round_up(*cur_out, sectorsize) - *cur_out;
if (sector_bytes_left >= LZO_LEN || sector_bytes_left == 0)
goto out;
/* The remaining size is not enough, pad it with zeros */
memset(kaddr + offset_in_page(*cur_out), 0,
sector_bytes_left);
*cur_out += sector_bytes_left;
out:
kunmap_local(kaddr);
return 0;
}
int lzo_compress_pages(struct list_head *ws, struct address_space *mapping,
u64 start, struct page **pages, unsigned long *out_pages,
unsigned long *total_in, unsigned long *total_out)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
const u32 sectorsize = btrfs_sb(mapping->host->i_sb)->sectorsize;
struct page *page_in = NULL;
char *sizes_ptr;
const unsigned long max_nr_page = *out_pages;
int ret = 0;
/* Points to the file offset of input data */
u64 cur_in = start;
/* Points to the current output byte */
u32 cur_out = 0;
u32 len = *total_out;
ASSERT(max_nr_page > 0);
*out_pages = 0;
*total_out = 0;
*total_in = 0;
/*
* Skip the header for now, we will later come back and write the total
* compressed size
*/
cur_out += LZO_LEN;
while (cur_in < start + len) {
char *data_in;
const u32 sectorsize_mask = sectorsize - 1;
u32 sector_off = (cur_in - start) & sectorsize_mask;
u32 in_len;
size_t out_len;
/* Get the input page first */
if (!page_in) {
page_in = find_get_page(mapping, cur_in >> PAGE_SHIFT);
ASSERT(page_in);
}
/* Compress at most one sector of data each time */
in_len = min_t(u32, start + len - cur_in, sectorsize - sector_off);
ASSERT(in_len);
data_in = kmap_local_page(page_in);
ret = lzo1x_1_compress(data_in +
offset_in_page(cur_in), in_len,
workspace->cbuf, &out_len,
workspace->mem);
kunmap_local(data_in);
if (ret < 0) {
pr_debug("BTRFS: lzo in loop returned %d\n", ret);
ret = -EIO;
goto out;
}
ret = copy_compressed_data_to_page(workspace->cbuf, out_len,
pages, max_nr_page,
&cur_out, sectorsize);
if (ret < 0)
goto out;
cur_in += in_len;
/*
* Check if we're making it bigger after two sectors. And if
* it is so, give up.
*/
if (cur_in - start > sectorsize * 2 && cur_in - start < cur_out) {
ret = -E2BIG;
goto out;
}
/* Check if we have reached page boundary */
if (PAGE_ALIGNED(cur_in)) {
put_page(page_in);
page_in = NULL;
}
}
/* Store the size of all chunks of compressed data */
sizes_ptr = kmap_local_page(pages[0]);
write_compress_length(sizes_ptr, cur_out);
kunmap_local(sizes_ptr);
ret = 0;
*total_out = cur_out;
*total_in = cur_in - start;
out:
if (page_in)
put_page(page_in);
*out_pages = DIV_ROUND_UP(cur_out, PAGE_SIZE);
return ret;
}
/*
* Copy the compressed segment payload into @dest.
*
* For the payload there will be no padding, just need to do page switching.
*/
static void copy_compressed_segment(struct compressed_bio *cb,
char *dest, u32 len, u32 *cur_in)
{
u32 orig_in = *cur_in;
while (*cur_in < orig_in + len) {
struct page *cur_page;
u32 copy_len = min_t(u32, PAGE_SIZE - offset_in_page(*cur_in),
orig_in + len - *cur_in);
ASSERT(copy_len);
cur_page = cb->compressed_pages[*cur_in / PAGE_SIZE];
memcpy_from_page(dest + *cur_in - orig_in, cur_page,
offset_in_page(*cur_in), copy_len);
*cur_in += copy_len;
}
}
int lzo_decompress_bio(struct list_head *ws, struct compressed_bio *cb)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
const struct btrfs_fs_info *fs_info = cb->bbio.inode->root->fs_info;
const u32 sectorsize = fs_info->sectorsize;
char *kaddr;
int ret;
/* Compressed data length, can be unaligned */
u32 len_in;
/* Offset inside the compressed data */
u32 cur_in = 0;
/* Bytes decompressed so far */
u32 cur_out = 0;
kaddr = kmap_local_page(cb->compressed_pages[0]);
len_in = read_compress_length(kaddr);
kunmap_local(kaddr);
cur_in += LZO_LEN;
/*
* LZO header length check
*
* The total length should not exceed the maximum extent length,
* and all sectors should be used.
* If this happens, it means the compressed extent is corrupted.
*/
if (len_in > min_t(size_t, BTRFS_MAX_COMPRESSED, cb->compressed_len) ||
round_up(len_in, sectorsize) < cb->compressed_len) {
btrfs_err(fs_info,
"invalid lzo header, lzo len %u compressed len %u",
len_in, cb->compressed_len);
return -EUCLEAN;
}
/* Go through each lzo segment */
while (cur_in < len_in) {
struct page *cur_page;
/* Length of the compressed segment */
u32 seg_len;
u32 sector_bytes_left;
size_t out_len = lzo1x_worst_compress(sectorsize);
/*
* We should always have enough space for one segment header
* inside current sector.
*/
ASSERT(cur_in / sectorsize ==
(cur_in + LZO_LEN - 1) / sectorsize);
cur_page = cb->compressed_pages[cur_in / PAGE_SIZE];
ASSERT(cur_page);
kaddr = kmap_local_page(cur_page);
seg_len = read_compress_length(kaddr + offset_in_page(cur_in));
kunmap_local(kaddr);
cur_in += LZO_LEN;
if (seg_len > WORKSPACE_CBUF_LENGTH) {
/*
* seg_len shouldn't be larger than we have allocated
* for workspace->cbuf
*/
btrfs_err(fs_info, "unexpectedly large lzo segment len %u",
seg_len);
return -EIO;
}
/* Copy the compressed segment payload into workspace */
copy_compressed_segment(cb, workspace->cbuf, seg_len, &cur_in);
/* Decompress the data */
ret = lzo1x_decompress_safe(workspace->cbuf, seg_len,
workspace->buf, &out_len);
if (ret != LZO_E_OK) {
btrfs_err(fs_info, "failed to decompress");
return -EIO;
}
/* Copy the data into inode pages */
ret = btrfs_decompress_buf2page(workspace->buf, out_len, cb, cur_out);
cur_out += out_len;
/* All data read, exit */
if (ret == 0)
return 0;
ret = 0;
/* Check if the sector has enough space for a segment header */
sector_bytes_left = sectorsize - (cur_in % sectorsize);
if (sector_bytes_left >= LZO_LEN)
continue;
/* Skip the padding zeros */
cur_in += sector_bytes_left;
}
return 0;
}
int lzo_decompress(struct list_head *ws, const u8 *data_in,
struct page *dest_page, unsigned long start_byte, size_t srclen,
size_t destlen)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
size_t in_len;
size_t out_len;
size_t max_segment_len = WORKSPACE_BUF_LENGTH;
int ret = 0;
char *kaddr;
unsigned long bytes;
if (srclen < LZO_LEN || srclen > max_segment_len + LZO_LEN * 2)
return -EUCLEAN;
in_len = read_compress_length(data_in);
if (in_len != srclen)
return -EUCLEAN;
data_in += LZO_LEN;
in_len = read_compress_length(data_in);
if (in_len != srclen - LZO_LEN * 2) {
ret = -EUCLEAN;
goto out;
}
data_in += LZO_LEN;
out_len = PAGE_SIZE;
ret = lzo1x_decompress_safe(data_in, in_len, workspace->buf, &out_len);
if (ret != LZO_E_OK) {
pr_warn("BTRFS: decompress failed!\n");
ret = -EIO;
goto out;
}
if (out_len < start_byte) {
ret = -EIO;
goto out;
}
/*
* the caller is already checking against PAGE_SIZE, but lets
* move this check closer to the memcpy/memset
*/
destlen = min_t(unsigned long, destlen, PAGE_SIZE);
bytes = min_t(unsigned long, destlen, out_len - start_byte);
kaddr = kmap_local_page(dest_page);
memcpy(kaddr, workspace->buf + start_byte, bytes);
/*
* btrfs_getblock is doing a zero on the tail of the page too,
* but this will cover anything missing from the decompressed
* data.
*/
if (bytes < destlen)
memset(kaddr+bytes, 0, destlen-bytes);
kunmap_local(kaddr);
out:
return ret;
}
const struct btrfs_compress_op btrfs_lzo_compress = {
.workspace_manager = &wsm,
.max_level = 1,
.default_level = 1,
};