linux/drivers/mtd/devices
Linus Torvalds e35a4a4e13 Core MTD changes:
* Replace the expert mode symbols with a single helper
 * Fix misuses of of_match_ptr()
 * Remove partid and partname debugfs files
 * tests: Fix eraseblock read speed miscalculation for lower partition sizes
 * TRX parser: Allow to use on MediaTek MIPS SoCs
 
 MTD driver changes:
 * spear_smi: use GFP_KERNEL
 * mchp48l640: Add SPI ID table
 * mchp23k256: Add SPI ID table
 * blkdevs: Avoid soft lockups with some mtd/spi devices
 * aspeed-smc: Improve probe resilience
 
 Hyperbus changes:
 * HBMC_AM654 should depend on ARCH_K3
 
 NAND core changes:
 * ECC:
   - Add infrastructure to support hardware engines
   - Add a new helper to retrieve the ECC context
   - Provide a helper to retrieve a pilelined engine device
 
 NAND-ECC changes:
 * Macronix ECC engine:
   - Add Macronix external ECC engine support
   - Support SPI pipelined mode
   - Make two read-only arrays static const
   - Fix compile test issue
 
 Raw NAND core changes:
 * Fix misuses of of_match_node()
 * Rework of_get_nand_bus_width()
 * Remove of_get_nand_on_flash_bbt() wrapper
 * Protect access to rawnand devices while in suspend
 * bindings: Document the wp-gpios property
 
 Rax NAND controller driver changes:
 * atmel: Fix refcount issue in atmel_nand_controller_init
 * nandsim:
   - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
   - Merge repeat codes in ns_switch_state
   - Replace overflow check with kzalloc to single kcalloc
 * rockchip: Fix platform_get_irq.cocci warning
 * stm32_fmc2: Add NAND Write Protect support
 * pl353: Set the nand chip node as the flash node
 * brcmnand: Fix sparse warnings in bcma_nand
 * omap_elm: Remove redundant variable 'errors'
 * gpmi:
   - Support fast edo timings for mx28
   - Validate controller clock rate
   - Fix controller timings setting
 * brcmnand:
   - Add BCMA shim
   - BCMA controller uses command shift of 0
   - Allow platform data instantation
   - Add platform data structure for BCMA
   - Allow working without interrupts
   - Move OF operations out of brcmnand_init_cs()
   - Avoid pdev in brcmnand_init_cs()
   - Allow SoC to provide I/O operations
   - Assign soc as early as possible
 
 Onenand changes:
 * Check for error irq
 
 SPI-NAND core changes:
 * Delay a little bit the dirmap creation
 * Create direct mapping descriptors for ECC operations
 
 SPI-NAND driver changes:
 * macronix: Use random program load
 
 SPI NOR core changes:
 * Move vendor specific code out of the core into vendor drivers.
 * Unify all function and object names in the vendor modules.
 * Make setup() callback optional to improve readability.
 * Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
   declaration.
 
 SPI changes:
 * Macronix SPI controller:
   - Fix the transmit path
   - Create a helper to configure the controller before an operation
   - Create a helper to ease the start of an operation
   - Add support for direct mapping
   - Add support for pipelined ECC operations
 * spi-mem:
   - Introduce a capability structure
   - Check the controller extra capabilities
   - cadence-quadspi/mxic: Provide capability structures
   - Kill the spi_mem_dtr_supports_op() helper
   - Add an ecc parameter to the spi_mem_op structure
 
 Binding changes:
 * Dropped mtd/cortina,gemini-flash.txt
 * Convert BCM47xx partitions to json-schema
 * Vendor prefixes: Clarify Macronix prefix
 * SPI NAND: Convert spi-nand description file to yaml
 * Raw NAND chip: Create a NAND chip description
 * Raw NAND controller:
   - Harmonize the property types
   - Fix a comment in the examples
   - Fix the reg property description
 * Describe Macronix NAND ECC engine
 * Macronix SPI controller:
   - Document the nand-ecc-engine property
   - Convert to yaml
   - The interrupt property is not mandatory
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmI7WJcACgkQJWrqGEe9
 VoSzpAgAutzRv9TRUiXdBGGlJ851QaZ6ZUvT1bHKTQA+xZi+MZyNmc0cWNg3B70I
 PnwyxNAmRkUQKwV5Vgy/sQrt42qZnPmr+8XMq+UiziPmgFdjiTdLqGcN619Hi12t
 JqtoKL828R064LSEq5nWsJ2waoGT1nNtZK8kA2qe8ctvmH0YTThriVZUQR4/Befb
 OGFheceLFycE/vkktPPr3As4603fMiyDOT7EA3Mtzgjohry0a0TqoakHCaHC/fYo
 0/h+x+jJATPtgbWm1ZiV3cZ/Su00+rKuQOsiAWvM/pqDaijsVntBmtK0PRtums2Q
 m8LCspuQYNnCINeQXqba9RxACpibDg==
 =+6Zk
 -----END PGP SIGNATURE-----

Merge tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "There has been a lot of activity in the MTD subsystem recently, with a
  number of SPI-NOR cleanups as well as the introduction of ECC engines
  that can be used by SPI controllers (hence a few SPI patches in here).

  Core MTD changes:
   - Replace the expert mode symbols with a single helper
   - Fix misuses of of_match_ptr()
   - Remove partid and partname debugfs files
   - tests: Fix eraseblock read speed miscalculation for lower partition
     sizes
   - TRX parser: Allow to use on MediaTek MIPS SoCs

  MTD driver changes:
   - spear_smi: use GFP_KERNEL
   - mchp48l640: Add SPI ID table
   - mchp23k256: Add SPI ID table
   - blkdevs: Avoid soft lockups with some mtd/spi devices
   - aspeed-smc: Improve probe resilience

  Hyperbus changes:
   - HBMC_AM654 should depend on ARCH_K3

  NAND core changes:
   - ECC:
      - Add infrastructure to support hardware engines
      - Add a new helper to retrieve the ECC context
      - Provide a helper to retrieve a pilelined engine device

  NAND-ECC changes:
   - Macronix ECC engine:
      - Add Macronix external ECC engine support
      - Support SPI pipelined mode
      - Make two read-only arrays static const
      - Fix compile test issue

  Raw NAND core changes:
   - Fix misuses of of_match_node()
   - Rework of_get_nand_bus_width()
   - Remove of_get_nand_on_flash_bbt() wrapper
   - Protect access to rawnand devices while in suspend
   - bindings: Document the wp-gpios property

  Rax NAND controller driver changes:
   - atmel: Fix refcount issue in atmel_nand_controller_init
   - nandsim:
      - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern
      - Merge repeat codes in ns_switch_state
      - Replace overflow check with kzalloc to single kcalloc
   - rockchip: Fix platform_get_irq.cocci warning
   - stm32_fmc2: Add NAND Write Protect support
   - pl353: Set the nand chip node as the flash node
   - brcmnand: Fix sparse warnings in bcma_nand
   - omap_elm: Remove redundant variable 'errors'
   - gpmi:
      - Support fast edo timings for mx28
      - Validate controller clock rate
      - Fix controller timings setting
   - brcmnand:
      - Add BCMA shim
      - BCMA controller uses command shift of 0
      - Allow platform data instantation
      - Add platform data structure for BCMA
      - Allow working without interrupts
      - Move OF operations out of brcmnand_init_cs()
      - Avoid pdev in brcmnand_init_cs()
      - Allow SoC to provide I/O operations
      - Assign soc as early as possible

  Onenand changes:
   - Check for error irq

  SPI-NAND core changes:
   - Delay a little bit the dirmap creation
   - Create direct mapping descriptors for ECC operations

  SPI-NAND driver changes:
   - macronix: Use random program load

  SPI NOR core changes:
   - Move vendor specific code out of the core into vendor drivers.
   - Unify all function and object names in the vendor modules.
   - Make setup() callback optional to improve readability.
   - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
     declaration.

  SPI changes:
   - Macronix SPI controller:
      - Fix the transmit path
      - Create a helper to configure the controller before an operation
      - Create a helper to ease the start of an operation
      - Add support for direct mapping
      - Add support for pipelined ECC operations
   - spi-mem:
      - Introduce a capability structure
      - Check the controller extra capabilities
      - cadence-quadspi/mxic: Provide capability structures
      - Kill the spi_mem_dtr_supports_op() helper
      - Add an ecc parameter to the spi_mem_op structure

  Binding changes:
   - Dropped mtd/cortina,gemini-flash.txt
   - Convert BCM47xx partitions to json-schema
   - Vendor prefixes: Clarify Macronix prefix
   - SPI NAND: Convert spi-nand description file to yaml
   - Raw NAND chip: Create a NAND chip description
   - Raw NAND controller:
      - Harmonize the property types
      - Fix a comment in the examples
      - Fix the reg property description
   - Describe Macronix NAND ECC engine
   - Macronix SPI controller:
      - Document the nand-ecc-engine property
      - Convert to yaml
      - The interrupt property is not mandatory"

* tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits)
  mtd: nand: ecc: mxic: Fix compile test issue
  mtd: nand: mxic-ecc: make two read-only arrays static const
  mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3
  mtd: core: Remove partid and partname debugfs files
  dt-bindings: mtd: partitions: convert BCM47xx to the json-schema
  mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes
  mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init
  mtd: rawnand: rockchip: fix platform_get_irq.cocci warning
  mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set
  mtd: spi-nor: renumber flags
  mtd: spi-nor: slightly change code style in spi_nor_sr_ready()
  mtd: spi-nor: spansion: rename vendor specific functions and defines
  mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag
  mtd: spi-nor: move all spansion specifics into spansion.c
  mtd: spi-nor: spansion: slightly rework control flow in late_init()
  mtd: spi-nor: micron-st: rename vendor specific functions and defines
  mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag
  mtd: spi-nor: move all micron-st specifics into micron-st.c
  mtd: spi-nor: xilinx: correct the debug message
  mtd: spi-nor: xilinx: rename vendor specific functions and defines
  ...
2022-03-25 13:35:34 -07:00
..
bcm47xxsflash.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
bcm47xxsflash.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
block2mtd.c mtd: block2mtd: add support for an optional custom MTD label 2021-10-15 12:30:35 +02:00
docg3.c mtd: devices: docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues 2020-11-20 12:37:30 +01:00
docg3.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 2019-05-30 11:26:35 -07:00
Kconfig mtd: devices: add support for microchip 48l640 EERAM 2021-06-11 20:43:12 +02:00
lart.c mtd: Avoid comma separated statements 2020-08-27 14:16:31 +02:00
Makefile mtd: devices: add support for microchip 48l640 EERAM 2021-06-11 20:43:12 +02:00
mchp23k256.c Core MTD changes: 2022-03-25 13:35:34 -07:00
mchp48l640.c Core MTD changes: 2022-03-25 13:35:34 -07:00
ms02-nv.c mtd: devices: Remove superfluous "break" 2021-05-26 10:58:26 +02:00
ms02-nv.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 2019-05-30 11:26:32 -07:00
mtd_dataflash.c spi: make remove callback a void function 2022-02-09 13:00:45 +00:00
mtdram.c mtd: mtdram: Expose module parameters 2019-01-08 12:42:57 +01:00
phram.c mtd: phram: Prevent divide by zero bug in phram_setup() 2022-01-25 10:32:07 +01:00
pmc551.c mtd: pmc551: Remove set but not used variable 'soff_lo' 2019-09-15 23:51:07 +02:00
powernv_flash.c mtd: devices: powernv_flash: Add function names to headers and fix 'dev' 2020-11-20 12:37:33 +01:00
serial_flash_cmds.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420 2019-06-05 17:37:15 +02:00
slram.c treewide: Add SPDX license identifier for more missed files 2019-05-21 10:50:45 +02:00
spear_smi.c mtd: spear_smi: use GFP_KERNEL 2022-02-18 15:14:01 +01:00
sst25l.c spi: make remove callback a void function 2022-02-09 13:00:45 +00:00
st_spi_fsm.c mtd: st_spi_fsm: convert comma to semicolon 2021-02-01 18:58:38 +01:00