system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-10-11 22:05:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/drivers/mmc/core
History
Chaotian Jing 08573eaf1a mmc: mmc: do not use CMD13 to get status after speed mode switch 
Per JEDEC spec, it is not recommended to use CMD13 to get card status
after speed mode switch. below are two reason about this:
1. CMD13 cannot be guaranteed due to the asynchronous operation.
Therefore it is not recommended to use CMD13 to check busy completion
of the timing change indication.
2. After switch to HS200, CMD13 will get response of 0x800, and even the
busy signal gets de-asserted, the response of CMD13 is aslo 0x800.

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25 10:34:08 +02:00
..
bus.c mmc: core: implement enhanced strobe support 2016-07-25 10:34:05 +02:00
bus.h mmc: rename dev_to_mmc_card() to mmc_dev_to_card() 2010-10-23 21:11:12 +08:00
core.c mmc: core: implement enhanced strobe support 2016-07-25 10:34:05 +02:00
core.h mmc: fix mmc_{un,}register_pm_notifier prototypes 2015-12-22 11:32:09 +01:00
debugfs.c mmc: debugfs: add HS400 enhanced strobe description 2016-07-25 10:34:06 +02:00
host.c mmc: core: add mmc-hs400-enhanced-strobe support 2016-07-25 10:34:05 +02:00
host.h mmc: host: Add facility to support re-tuning 2015-06-01 09:06:53 +02:00
Kconfig mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
Makefile mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
mmc.c mmc: mmc: do not use CMD13 to get status after speed mode switch 2016-07-25 10:34:08 +02:00
mmc_ops.c mmc: mmc: Use ->card_busy() to detect busy cards in __mmc_switch() 2016-07-25 10:34:08 +02:00
mmc_ops.h mmc: core: Convert __mmc_switch() into an internal core function 2015-10-26 15:59:54 +01:00
pwrseq.c mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq.h mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq_emmc.c mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
pwrseq_simple.c mmc: pwrseq: convert to proper platform device 2016-05-02 10:33:30 +02:00
quirks.c mmc: core: Remove MMC_CLKGATE 2015-10-26 16:00:09 +01:00
sd.c mmc: core: remove redundant memset of mmc_decode_cid 2016-03-17 14:54:41 +01:00
sd.h mmc: drop the speed mode of card's state 2014-05-12 18:05:53 -04:00
sd_ops.c mmc: remove unnecessary assignment statements before return 2016-02-29 11:02:47 +01:00
sd_ops.h mmc: add erase, secure erase, trim and secure trim operations 2010-08-12 08:43:30 -07:00
sdio.c mmc: core: remove redundant memset of sdio_read_cccr 2016-03-17 14:54:41 +01:00
sdio_bus.c mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously 2015-12-22 11:32:16 +01:00
sdio_bus.h
sdio_cis.c mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards 2016-05-16 11:31:27 +02:00
sdio_cis.h
sdio_io.c mmc: sdio: Use multiple scatter/gather list 2012-12-06 13:54:43 -05:00
sdio_irq.c mmc: core: Remove MMC_CLKGATE 2015-10-26 16:00:09 +01:00
sdio_ops.c mmc: remove unnecessary assignment statements before return 2016-02-29 11:02:47 +01:00
sdio_ops.h mmc: Add mmc_is_io_op helper function 2015-10-26 16:00:01 +01:00
slot-gpio.c mmc: slot-gpio: Allow host driver to provide isr for card-detect interrupts 2015-01-19 09:56:29 +01:00
slot-gpio.h mmc: slot-gpio: Make mmc_gpio_alloc() available for MMC core 2015-01-19 09:56:17 +01:00