linux/drivers/watchdog/s3c2410_wdt.c
Hans de Goede 5f2430f554 watchdog: s3c2410_wdt: Set timeout to actually achieved timeout
While rebasing my "watchdog_dev: Let the driver update the timeout field on
set_timeout success" patch (before I noticed it was already picked up by Wim),
I noticed that the s3c2410_wdt driver may not always have a 1 second
resolution, this patch changes s3c2410wdt_set_heartbeat to update the
timeout to the actually achieved timeout.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23 16:26:20 +02:00

544 lines
13 KiB
C

/* linux/drivers/char/watchdog/s3c2410_wdt.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 Watchdog Timer Support
*
* Based on, softdog.c by Alan Cox,
* (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/miscdevice.h> /* for MODULE_ALIAS_MISCDEV */
#include <linux/watchdog.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
#include <mach/map.h>
#undef S3C_VA_WATCHDOG
#define S3C_VA_WATCHDOG (0)
#include <plat/regs-watchdog.h>
#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
static bool nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME;
static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
static int soft_noboot;
static int debug;
module_param(tmr_margin, int, 0);
module_param(tmr_atboot, int, 0);
module_param(nowayout, bool, 0);
module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
MODULE_PARM_DESC(tmr_atboot,
"Watchdog is started at boot time if set to 1, default="
__MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
"0 to reboot (default 0)");
MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
static struct device *wdt_dev; /* platform device attached to */
static struct resource *wdt_mem;
static struct resource *wdt_irq;
static struct clk *wdt_clock;
static void __iomem *wdt_base;
static unsigned int wdt_count;
static DEFINE_SPINLOCK(wdt_lock);
/* watchdog control routines */
#define DBG(fmt, ...) \
do { \
if (debug) \
pr_info(fmt, ##__VA_ARGS__); \
} while (0)
/* functions */
static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
{
spin_lock(&wdt_lock);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
spin_unlock(&wdt_lock);
return 0;
}
static void __s3c2410wdt_stop(void)
{
unsigned long wtcon;
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
writel(wtcon, wdt_base + S3C2410_WTCON);
}
static int s3c2410wdt_stop(struct watchdog_device *wdd)
{
spin_lock(&wdt_lock);
__s3c2410wdt_stop();
spin_unlock(&wdt_lock);
return 0;
}
static int s3c2410wdt_start(struct watchdog_device *wdd)
{
unsigned long wtcon;
spin_lock(&wdt_lock);
__s3c2410wdt_stop();
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
if (soft_noboot) {
wtcon |= S3C2410_WTCON_INTEN;
wtcon &= ~S3C2410_WTCON_RSTEN;
} else {
wtcon &= ~S3C2410_WTCON_INTEN;
wtcon |= S3C2410_WTCON_RSTEN;
}
DBG("%s: wdt_count=0x%08x, wtcon=%08lx\n",
__func__, wdt_count, wtcon);
writel(wdt_count, wdt_base + S3C2410_WTDAT);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
return 0;
}
static inline int s3c2410wdt_is_running(void)
{
return readl(wdt_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
}
static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd, unsigned timeout)
{
unsigned long freq = clk_get_rate(wdt_clock);
unsigned int count;
unsigned int divisor = 1;
unsigned long wtcon;
if (timeout < 1)
return -EINVAL;
freq /= 128;
count = timeout * freq;
DBG("%s: count=%d, timeout=%d, freq=%lu\n",
__func__, count, timeout, freq);
/* if the count is bigger than the watchdog register,
then work out what we need to do (and if) we can
actually make this value
*/
if (count >= 0x10000) {
for (divisor = 1; divisor <= 0x100; divisor++) {
if ((count / divisor) < 0x10000)
break;
}
if ((count / divisor) >= 0x10000) {
dev_err(wdt_dev, "timeout %d too big\n", timeout);
return -EINVAL;
}
}
DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
__func__, timeout, divisor, count, count/divisor);
count /= divisor;
wdt_count = count;
/* update the pre-scaler */
wtcon = readl(wdt_base + S3C2410_WTCON);
wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
writel(count, wdt_base + S3C2410_WTDAT);
writel(wtcon, wdt_base + S3C2410_WTCON);
wdd->timeout = (count * divisor) / freq;
return 0;
}
#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
static const struct watchdog_info s3c2410_wdt_ident = {
.options = OPTIONS,
.firmware_version = 0,
.identity = "S3C2410 Watchdog",
};
static struct watchdog_ops s3c2410wdt_ops = {
.owner = THIS_MODULE,
.start = s3c2410wdt_start,
.stop = s3c2410wdt_stop,
.ping = s3c2410wdt_keepalive,
.set_timeout = s3c2410wdt_set_heartbeat,
};
static struct watchdog_device s3c2410_wdd = {
.info = &s3c2410_wdt_ident,
.ops = &s3c2410wdt_ops,
};
/* interrupt handler code */
static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
{
dev_info(wdt_dev, "watchdog timer expired (irq)\n");
s3c2410wdt_keepalive(&s3c2410_wdd);
return IRQ_HANDLED;
}
#ifdef CONFIG_CPU_FREQ
static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
int ret;
if (!s3c2410wdt_is_running())
goto done;
if (val == CPUFREQ_PRECHANGE) {
/* To ensure that over the change we don't cause the
* watchdog to trigger, we perform an keep-alive if
* the watchdog is running.
*/
s3c2410wdt_keepalive(&s3c2410_wdd);
} else if (val == CPUFREQ_POSTCHANGE) {
s3c2410wdt_stop(&s3c2410_wdd);
ret = s3c2410wdt_set_heartbeat(&s3c2410_wdd, s3c2410_wdd.timeout);
if (ret >= 0)
s3c2410wdt_start(&s3c2410_wdd);
else
goto err;
}
done:
return 0;
err:
dev_err(wdt_dev, "cannot set new value for timeout %d\n",
s3c2410_wdd.timeout);
return ret;
}
static struct notifier_block s3c2410wdt_cpufreq_transition_nb = {
.notifier_call = s3c2410wdt_cpufreq_transition,
};
static inline int s3c2410wdt_cpufreq_register(void)
{
return cpufreq_register_notifier(&s3c2410wdt_cpufreq_transition_nb,
CPUFREQ_TRANSITION_NOTIFIER);
}
static inline void s3c2410wdt_cpufreq_deregister(void)
{
cpufreq_unregister_notifier(&s3c2410wdt_cpufreq_transition_nb,
CPUFREQ_TRANSITION_NOTIFIER);
}
#else
static inline int s3c2410wdt_cpufreq_register(void)
{
return 0;
}
static inline void s3c2410wdt_cpufreq_deregister(void)
{
}
#endif
static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
{
struct device *dev;
unsigned int wtcon;
int started = 0;
int ret;
int size;
DBG("%s: probe=%p\n", __func__, pdev);
dev = &pdev->dev;
wdt_dev = &pdev->dev;
wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (wdt_mem == NULL) {
dev_err(dev, "no memory resource specified\n");
return -ENOENT;
}
wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (wdt_irq == NULL) {
dev_err(dev, "no irq resource specified\n");
ret = -ENOENT;
goto err;
}
/* get the memory region for the watchdog timer */
size = resource_size(wdt_mem);
if (!request_mem_region(wdt_mem->start, size, pdev->name)) {
dev_err(dev, "failed to get memory region\n");
ret = -EBUSY;
goto err;
}
wdt_base = ioremap(wdt_mem->start, size);
if (wdt_base == NULL) {
dev_err(dev, "failed to ioremap() region\n");
ret = -EINVAL;
goto err_req;
}
DBG("probe: mapped wdt_base=%p\n", wdt_base);
wdt_clock = clk_get(&pdev->dev, "watchdog");
if (IS_ERR(wdt_clock)) {
dev_err(dev, "failed to find watchdog clock source\n");
ret = PTR_ERR(wdt_clock);
goto err_map;
}
clk_enable(wdt_clock);
ret = s3c2410wdt_cpufreq_register();
if (ret < 0) {
pr_err("failed to register cpufreq\n");
goto err_clk;
}
/* see if we can actually set the requested timer margin, and if
* not, try the default value */
if (s3c2410wdt_set_heartbeat(&s3c2410_wdd, tmr_margin)) {
started = s3c2410wdt_set_heartbeat(&s3c2410_wdd,
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
if (started == 0)
dev_info(dev,
"tmr_margin value out of range, default %d used\n",
CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
else
dev_info(dev, "default timer value is out of range, "
"cannot start\n");
}
ret = request_irq(wdt_irq->start, s3c2410wdt_irq, 0, pdev->name, pdev);
if (ret != 0) {
dev_err(dev, "failed to install irq (%d)\n", ret);
goto err_cpufreq;
}
watchdog_set_nowayout(&s3c2410_wdd, nowayout);
ret = watchdog_register_device(&s3c2410_wdd);
if (ret) {
dev_err(dev, "cannot register watchdog (%d)\n", ret);
goto err_irq;
}
if (tmr_atboot && started == 0) {
dev_info(dev, "starting watchdog timer\n");
s3c2410wdt_start(&s3c2410_wdd);
} else if (!tmr_atboot) {
/* if we're not enabling the watchdog, then ensure it is
* disabled if it has been left running from the bootloader
* or other source */
s3c2410wdt_stop(&s3c2410_wdd);
}
/* print out a statement of readiness */
wtcon = readl(wdt_base + S3C2410_WTCON);
dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
(wtcon & S3C2410_WTCON_ENABLE) ? "" : "in",
(wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
(wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
return 0;
err_irq:
free_irq(wdt_irq->start, pdev);
err_cpufreq:
s3c2410wdt_cpufreq_deregister();
err_clk:
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
err_map:
iounmap(wdt_base);
err_req:
release_mem_region(wdt_mem->start, size);
err:
wdt_irq = NULL;
wdt_mem = NULL;
return ret;
}
static int __devexit s3c2410wdt_remove(struct platform_device *dev)
{
watchdog_unregister_device(&s3c2410_wdd);
free_irq(wdt_irq->start, dev);
s3c2410wdt_cpufreq_deregister();
clk_disable(wdt_clock);
clk_put(wdt_clock);
wdt_clock = NULL;
iounmap(wdt_base);
release_mem_region(wdt_mem->start, resource_size(wdt_mem));
wdt_irq = NULL;
wdt_mem = NULL;
return 0;
}
static void s3c2410wdt_shutdown(struct platform_device *dev)
{
s3c2410wdt_stop(&s3c2410_wdd);
}
#ifdef CONFIG_PM
static unsigned long wtcon_save;
static unsigned long wtdat_save;
static int s3c2410wdt_suspend(struct platform_device *dev, pm_message_t state)
{
/* Save watchdog state, and turn it off. */
wtcon_save = readl(wdt_base + S3C2410_WTCON);
wtdat_save = readl(wdt_base + S3C2410_WTDAT);
/* Note that WTCNT doesn't need to be saved. */
s3c2410wdt_stop(&s3c2410_wdd);
return 0;
}
static int s3c2410wdt_resume(struct platform_device *dev)
{
/* Restore watchdog state. */
writel(wtdat_save, wdt_base + S3C2410_WTDAT);
writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
writel(wtcon_save, wdt_base + S3C2410_WTCON);
pr_info("watchdog %sabled\n",
(wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
return 0;
}
#else
#define s3c2410wdt_suspend NULL
#define s3c2410wdt_resume NULL
#endif /* CONFIG_PM */
#ifdef CONFIG_OF
static const struct of_device_id s3c2410_wdt_match[] = {
{ .compatible = "samsung,s3c2410-wdt" },
{},
};
MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
#endif
static struct platform_driver s3c2410wdt_driver = {
.probe = s3c2410wdt_probe,
.remove = __devexit_p(s3c2410wdt_remove),
.shutdown = s3c2410wdt_shutdown,
.suspend = s3c2410wdt_suspend,
.resume = s3c2410wdt_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-wdt",
.of_match_table = of_match_ptr(s3c2410_wdt_match),
},
};
static int __init watchdog_init(void)
{
pr_info("S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n");
return platform_driver_register(&s3c2410wdt_driver);
}
static void __exit watchdog_exit(void)
{
platform_driver_unregister(&s3c2410wdt_driver);
}
module_init(watchdog_init);
module_exit(watchdog_exit);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
"Dimitry Andric <dimitry.andric@tomtom.com>");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
MODULE_ALIAS("platform:s3c2410-wdt");