linux/drivers/cpufreq/exynos-cpufreq.c
Lukasz Majewski c683c2c963 cpufreq: exynos: Extend Exynos cpufreq driver to support boost
The cpufreq_driver's boost_supported flag is true only when boost
support is explicitly enabled. Boost related attributes are exported
only under the same condition.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-17 02:00:45 +01:00

293 lines
7.1 KiB
C

/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - CPU frequency scaling support for EXYNOS series
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/cpufreq.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <plat/cpu.h>
#include "exynos-cpufreq.h"
static struct exynos_dvfs_info *exynos_info;
static struct regulator *arm_regulator;
static unsigned int locking_frequency;
static bool frequency_locked;
static DEFINE_MUTEX(cpufreq_lock);
static int exynos_cpufreq_get_index(unsigned int freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
int index;
for (index = 0;
freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
if (freq_table[index].frequency == freq)
break;
if (freq_table[index].frequency == CPUFREQ_TABLE_END)
return -EINVAL;
return index;
}
static int exynos_cpufreq_scale(unsigned int target_freq)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
unsigned int *volt_table = exynos_info->volt_table;
struct cpufreq_policy *policy = cpufreq_cpu_get(0);
unsigned int arm_volt, safe_arm_volt = 0;
unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
unsigned int old_freq;
int index, old_index;
int ret = 0;
old_freq = policy->cur;
/*
* The policy max have been changed so that we cannot get proper
* old_index with cpufreq_frequency_table_target(). Thus, ignore
* policy and get the index from the raw frequency table.
*/
old_index = exynos_cpufreq_get_index(old_freq);
if (old_index < 0) {
ret = old_index;
goto out;
}
index = exynos_cpufreq_get_index(target_freq);
if (index < 0) {
ret = index;
goto out;
}
/*
* ARM clock source will be changed APLL to MPLL temporary
* To support this level, need to control regulator for
* required voltage level
*/
if (exynos_info->need_apll_change != NULL) {
if (exynos_info->need_apll_change(old_index, index) &&
(freq_table[index].frequency < mpll_freq_khz) &&
(freq_table[old_index].frequency < mpll_freq_khz))
safe_arm_volt = volt_table[exynos_info->pll_safe_idx];
}
arm_volt = volt_table[index];
/* When the new frequency is higher than current frequency */
if ((target_freq > old_freq) && !safe_arm_volt) {
/* Firstly, voltage up to increase frequency */
ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
if (ret) {
pr_err("%s: failed to set cpu voltage to %d\n",
__func__, arm_volt);
return ret;
}
}
if (safe_arm_volt) {
ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
safe_arm_volt);
if (ret) {
pr_err("%s: failed to set cpu voltage to %d\n",
__func__, safe_arm_volt);
return ret;
}
}
exynos_info->set_freq(old_index, index);
/* When the new frequency is lower than current frequency */
if ((target_freq < old_freq) ||
((target_freq > old_freq) && safe_arm_volt)) {
/* down the voltage after frequency change */
ret = regulator_set_voltage(arm_regulator, arm_volt,
arm_volt);
if (ret) {
pr_err("%s: failed to set cpu voltage to %d\n",
__func__, arm_volt);
goto out;
}
}
out:
cpufreq_cpu_put(policy);
return ret;
}
static int exynos_target(struct cpufreq_policy *policy, unsigned int index)
{
struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
int ret = 0;
mutex_lock(&cpufreq_lock);
if (frequency_locked)
goto out;
ret = exynos_cpufreq_scale(freq_table[index].frequency);
out:
mutex_unlock(&cpufreq_lock);
return ret;
}
#ifdef CONFIG_PM
static int exynos_cpufreq_suspend(struct cpufreq_policy *policy)
{
return 0;
}
static int exynos_cpufreq_resume(struct cpufreq_policy *policy)
{
return 0;
}
#endif
/**
* exynos_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
* context
* @notifier
* @pm_event
* @v
*
* While frequency_locked == true, target() ignores every frequency but
* locking_frequency. The locking_frequency value is the initial frequency,
* which is set by the bootloader. In order to eliminate possible
* inconsistency in clock values, we save and restore frequencies during
* suspend and resume and block CPUFREQ activities. Note that the standard
* suspend/resume cannot be used as they are too deep (syscore_ops) for
* regulator actions.
*/
static int exynos_cpufreq_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event, void *v)
{
int ret;
switch (pm_event) {
case PM_SUSPEND_PREPARE:
mutex_lock(&cpufreq_lock);
frequency_locked = true;
mutex_unlock(&cpufreq_lock);
ret = exynos_cpufreq_scale(locking_frequency);
if (ret < 0)
return NOTIFY_BAD;
break;
case PM_POST_SUSPEND:
mutex_lock(&cpufreq_lock);
frequency_locked = false;
mutex_unlock(&cpufreq_lock);
break;
}
return NOTIFY_OK;
}
static struct notifier_block exynos_cpufreq_nb = {
.notifier_call = exynos_cpufreq_pm_notifier,
};
static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
policy->clk = exynos_info->cpu_clk;
return cpufreq_generic_init(policy, exynos_info->freq_table, 100000);
}
static struct cpufreq_driver exynos_driver = {
.flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = exynos_target,
.get = cpufreq_generic_get,
.init = exynos_cpufreq_cpu_init,
.exit = cpufreq_generic_exit,
.name = "exynos_cpufreq",
.attr = cpufreq_generic_attr,
#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW
.boost_supported = true,
#endif
#ifdef CONFIG_PM
.suspend = exynos_cpufreq_suspend,
.resume = exynos_cpufreq_resume,
#endif
};
static int exynos_cpufreq_probe(struct platform_device *pdev)
{
int ret = -EINVAL;
exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL);
if (!exynos_info)
return -ENOMEM;
if (soc_is_exynos4210())
ret = exynos4210_cpufreq_init(exynos_info);
else if (soc_is_exynos4212() || soc_is_exynos4412())
ret = exynos4x12_cpufreq_init(exynos_info);
else if (soc_is_exynos5250())
ret = exynos5250_cpufreq_init(exynos_info);
else
return 0;
if (ret)
goto err_vdd_arm;
if (exynos_info->set_freq == NULL) {
pr_err("%s: No set_freq function (ERR)\n", __func__);
goto err_vdd_arm;
}
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
pr_err("%s: failed to get resource vdd_arm\n", __func__);
goto err_vdd_arm;
}
locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000;
register_pm_notifier(&exynos_cpufreq_nb);
if (cpufreq_register_driver(&exynos_driver)) {
pr_err("%s: failed to register cpufreq driver\n", __func__);
goto err_cpufreq;
}
return 0;
err_cpufreq:
unregister_pm_notifier(&exynos_cpufreq_nb);
regulator_put(arm_regulator);
err_vdd_arm:
kfree(exynos_info);
return -EINVAL;
}
static struct platform_driver exynos_cpufreq_platdrv = {
.driver = {
.name = "exynos-cpufreq",
.owner = THIS_MODULE,
},
.probe = exynos_cpufreq_probe,
};
module_platform_driver(exynos_cpufreq_platdrv);