linux/drivers/regulator/max8660.c
Uwe Kleine-König 964e186547
regulator: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230505220218.1239542-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-08 08:50:11 +09:00

530 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* max8660.c -- Voltage regulation for the Maxim 8660/8661
*
* based on max1586.c and wm8400-regulator.c
*
* Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
*
* Some info:
*
* Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf
*
* This chip is a bit nasty because it is a write-only device. Thus, the driver
* uses shadow registers to keep track of its values. The main problem appears
* to be the initialization: When Linux boots up, we cannot know if the chip is
* in the default state or not, so we would have to pass such information in
* platform_data. As this adds a bit of complexity to the driver, this is left
* out for now until it is really needed.
*
* [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2.
*
* If the driver is feature complete, it might be worth to check if one set of
* functions for V3-V7 is sufficient. For maximum flexibility during
* development, they are separated for now.
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/slab.h>
#include <linux/regulator/max8660.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/of_regulator.h>
#define MAX8660_DCDC_MIN_UV 725000
#define MAX8660_DCDC_MAX_UV 1800000
#define MAX8660_DCDC_STEP 25000
#define MAX8660_DCDC_MAX_SEL 0x2b
#define MAX8660_LDO5_MIN_UV 1700000
#define MAX8660_LDO5_MAX_UV 2000000
#define MAX8660_LDO5_STEP 25000
#define MAX8660_LDO5_MAX_SEL 0x0c
#define MAX8660_LDO67_MIN_UV 1800000
#define MAX8660_LDO67_MAX_UV 3300000
#define MAX8660_LDO67_STEP 100000
#define MAX8660_LDO67_MAX_SEL 0x0f
enum {
MAX8660_OVER1,
MAX8660_OVER2,
MAX8660_VCC1,
MAX8660_ADTV1,
MAX8660_ADTV2,
MAX8660_SDTV1,
MAX8660_SDTV2,
MAX8660_MDTV1,
MAX8660_MDTV2,
MAX8660_L12VCR,
MAX8660_FPWM,
MAX8660_N_REGS, /* not a real register */
};
struct max8660 {
struct i2c_client *client;
u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */
};
static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val)
{
static const u8 max8660_addresses[MAX8660_N_REGS] = {
0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80
};
int ret;
u8 reg_val = (max8660->shadow_regs[reg] & mask) | val;
dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n",
max8660_addresses[reg], reg_val);
ret = i2c_smbus_write_byte_data(max8660->client,
max8660_addresses[reg], reg_val);
if (ret == 0)
max8660->shadow_regs[reg] = reg_val;
return ret;
}
/*
* DCDC functions
*/
static int max8660_dcdc_is_enabled(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 val = max8660->shadow_regs[MAX8660_OVER1];
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
return !!(val & mask);
}
static int max8660_dcdc_enable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
return max8660_write(max8660, MAX8660_OVER1, 0xff, bit);
}
static int max8660_dcdc_disable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4;
return max8660_write(max8660, MAX8660_OVER1, mask, 0);
}
static int max8660_dcdc_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
u8 selector = max8660->shadow_regs[reg];
return selector;
}
static int max8660_dcdc_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 reg, bits;
int ret;
reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
ret = max8660_write(max8660, reg, 0, selector);
if (ret)
return ret;
/* Select target voltage register and activate regulation */
bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30;
return max8660_write(max8660, MAX8660_VCC1, 0xff, bits);
}
static struct regulator_ops max8660_dcdc_ops = {
.is_enabled = max8660_dcdc_is_enabled,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = max8660_dcdc_set_voltage_sel,
.get_voltage_sel = max8660_dcdc_get_voltage_sel,
};
/*
* LDO5 functions
*/
static int max8660_ldo5_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 selector = max8660->shadow_regs[MAX8660_MDTV2];
return selector;
}
static int max8660_ldo5_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
int ret;
ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector);
if (ret)
return ret;
/* Select target voltage register and activate regulation */
return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0);
}
static const struct regulator_ops max8660_ldo5_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = max8660_ldo5_set_voltage_sel,
.get_voltage_sel = max8660_ldo5_get_voltage_sel,
};
/*
* LDO67 functions
*/
static int max8660_ldo67_is_enabled(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 val = max8660->shadow_regs[MAX8660_OVER2];
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
return !!(val & mask);
}
static int max8660_ldo67_enable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
return max8660_write(max8660, MAX8660_OVER2, 0xff, bit);
}
static int max8660_ldo67_disable(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4;
return max8660_write(max8660, MAX8660_OVER2, mask, 0);
}
static int max8660_ldo67_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4;
u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf;
return selector;
}
static int max8660_ldo67_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct max8660 *max8660 = rdev_get_drvdata(rdev);
if (rdev_get_id(rdev) == MAX8660_V6)
return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector);
else
return max8660_write(max8660, MAX8660_L12VCR, 0x0f,
selector << 4);
}
static const struct regulator_ops max8660_ldo67_ops = {
.is_enabled = max8660_ldo67_is_enabled,
.enable = max8660_ldo67_enable,
.disable = max8660_ldo67_disable,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = max8660_ldo67_get_voltage_sel,
.set_voltage_sel = max8660_ldo67_set_voltage_sel,
};
static const struct regulator_desc max8660_reg[] = {
{
.name = "V3(DCDC)",
.id = MAX8660_V3,
.ops = &max8660_dcdc_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_DCDC_MIN_UV,
.uV_step = MAX8660_DCDC_STEP,
},
{
.name = "V4(DCDC)",
.id = MAX8660_V4,
.ops = &max8660_dcdc_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_DCDC_MIN_UV,
.uV_step = MAX8660_DCDC_STEP,
},
{
.name = "V5(LDO)",
.id = MAX8660_V5,
.ops = &max8660_ldo5_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO5_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO5_MIN_UV,
.uV_step = MAX8660_LDO5_STEP,
},
{
.name = "V6(LDO)",
.id = MAX8660_V6,
.ops = &max8660_ldo67_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO67_MIN_UV,
.uV_step = MAX8660_LDO67_STEP,
},
{
.name = "V7(LDO)",
.id = MAX8660_V7,
.ops = &max8660_ldo67_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
.owner = THIS_MODULE,
.min_uV = MAX8660_LDO67_MIN_UV,
.uV_step = MAX8660_LDO67_STEP,
},
};
enum {
MAX8660 = 0,
MAX8661 = 1,
};
#ifdef CONFIG_OF
static const struct of_device_id max8660_dt_ids[] = {
{ .compatible = "maxim,max8660", .data = (void *) MAX8660 },
{ .compatible = "maxim,max8661", .data = (void *) MAX8661 },
{ }
};
MODULE_DEVICE_TABLE(of, max8660_dt_ids);
static int max8660_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct max8660_platform_data *pdata)
{
int matched, i;
struct device_node *np;
struct max8660_subdev_data *sub;
struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
np = of_get_child_by_name(dev->of_node, "regulators");
if (!np) {
dev_err(dev, "missing 'regulators' subnode in DT\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(rmatch); i++)
rmatch[i].name = max8660_reg[i].name;
matched = of_regulator_match(dev, np, rmatch, ARRAY_SIZE(rmatch));
of_node_put(np);
if (matched <= 0)
return matched;
pdata->subdevs = devm_kcalloc(dev,
matched,
sizeof(struct max8660_subdev_data),
GFP_KERNEL);
if (!pdata->subdevs)
return -ENOMEM;
pdata->num_subdevs = matched;
sub = pdata->subdevs;
for (i = 0; i < matched; i++) {
sub->id = i;
sub->name = rmatch[i].name;
sub->platform_data = rmatch[i].init_data;
of_node[i] = rmatch[i].of_node;
sub++;
}
return 0;
}
#else
static inline int max8660_pdata_from_dt(struct device *dev,
struct device_node **of_node,
struct max8660_platform_data *pdata)
{
return 0;
}
#endif
static int max8660_probe(struct i2c_client *client)
{
const struct i2c_device_id *i2c_id = i2c_client_get_device_id(client);
struct device *dev = &client->dev;
struct max8660_platform_data pdata_of, *pdata = dev_get_platdata(dev);
struct regulator_config config = { };
struct max8660 *max8660;
int boot_on, i, id, ret = -EINVAL;
struct device_node *of_node[MAX8660_V_END];
unsigned long type;
if (dev->of_node && !pdata) {
const struct of_device_id *id;
id = of_match_device(of_match_ptr(max8660_dt_ids), dev);
if (!id)
return -ENODEV;
ret = max8660_pdata_from_dt(dev, of_node, &pdata_of);
if (ret < 0)
return ret;
pdata = &pdata_of;
type = (unsigned long) id->data;
} else {
type = i2c_id->driver_data;
memset(of_node, 0, sizeof(of_node));
}
if (pdata->num_subdevs > MAX8660_V_END) {
dev_err(dev, "Too many regulators found!\n");
return -EINVAL;
}
max8660 = devm_kzalloc(dev, sizeof(struct max8660), GFP_KERNEL);
if (!max8660)
return -ENOMEM;
max8660->client = client;
if (pdata->en34_is_high) {
/* Simulate always on */
max8660->shadow_regs[MAX8660_OVER1] = 5;
} else {
/* Otherwise devices can be toggled via software */
max8660_dcdc_ops.enable = max8660_dcdc_enable;
max8660_dcdc_ops.disable = max8660_dcdc_disable;
}
/*
* First, set up shadow registers to prevent glitches. As some
* registers are shared between regulators, everything must be properly
* set up for all regulators in advance.
*/
max8660->shadow_regs[MAX8660_ADTV1] =
max8660->shadow_regs[MAX8660_ADTV2] =
max8660->shadow_regs[MAX8660_SDTV1] =
max8660->shadow_regs[MAX8660_SDTV2] = 0x1b;
max8660->shadow_regs[MAX8660_MDTV1] =
max8660->shadow_regs[MAX8660_MDTV2] = 0x04;
for (i = 0; i < pdata->num_subdevs; i++) {
if (!pdata->subdevs[i].platform_data)
boot_on = false;
else
boot_on = pdata->subdevs[i].platform_data->constraints.boot_on;
switch (pdata->subdevs[i].id) {
case MAX8660_V3:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER1] |= 1;
break;
case MAX8660_V4:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER1] |= 4;
break;
case MAX8660_V5:
break;
case MAX8660_V6:
if (boot_on)
max8660->shadow_regs[MAX8660_OVER2] |= 2;
break;
case MAX8660_V7:
if (type == MAX8661) {
dev_err(dev, "Regulator not on this chip!\n");
return -EINVAL;
}
if (boot_on)
max8660->shadow_regs[MAX8660_OVER2] |= 4;
break;
default:
dev_err(dev, "invalid regulator %s\n",
pdata->subdevs[i].name);
return ret;
}
}
/* Finally register devices */
for (i = 0; i < pdata->num_subdevs; i++) {
struct regulator_dev *rdev;
id = pdata->subdevs[i].id;
config.dev = dev;
config.init_data = pdata->subdevs[i].platform_data;
config.of_node = of_node[i];
config.driver_data = max8660;
rdev = devm_regulator_register(&client->dev,
&max8660_reg[id], &config);
if (IS_ERR(rdev)) {
dev_err(&client->dev, "failed to register %s\n",
max8660_reg[id].name);
return PTR_ERR(rdev);
}
}
i2c_set_clientdata(client, max8660);
return 0;
}
static const struct i2c_device_id max8660_id[] = {
{ .name = "max8660", .driver_data = MAX8660 },
{ .name = "max8661", .driver_data = MAX8661 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max8660_id);
static struct i2c_driver max8660_driver = {
.probe = max8660_probe,
.driver = {
.name = "max8660",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
},
.id_table = max8660_id,
};
static int __init max8660_init(void)
{
return i2c_add_driver(&max8660_driver);
}
subsys_initcall(max8660_init);
static void __exit max8660_exit(void)
{
i2c_del_driver(&max8660_driver);
}
module_exit(max8660_exit);
/* Module information */
MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver");
MODULE_AUTHOR("Wolfram Sang");
MODULE_LICENSE("GPL v2");