linux/arch/arm/boot/dts/imx28-cfa10037.dts
Alexandre Belloni 4940631643 ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 16:26:36 +08:00

87 lines
1.9 KiB
Plaintext

/*
* Copyright 2012 Free Electrons
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*
* The CFA-10049 is an expansion board for the CFA-10036 module, thus we
* need to include the CFA-10036 DTS.
*/
/include/ "imx28-cfa10036.dts"
/ {
model = "Crystalfontz CFA-10037 Board";
compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
usb_pins_cfa10037: usb-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
mac0_pins_cfa10037: mac0-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
};
};
apbx@80040000 {
usbphy1: usbphy@8007e000 {
status = "okay";
};
};
};
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <&reg_usb1_vbus>;
pinctrl-0 = <&usbphy1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a
&mac0_pins_cfa10037>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
};
};
regulators {
compatible = "simple-bus";
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 7 1>;
};
};
};