linux/arch/metag/Kconfig
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

288 lines
7.1 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0
config METAG
def_bool y
select EMBEDDED
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_SHOW
select GENERIC_SMP_IDLE_THREAD
select HAVE_64BIT_ALIGNED_ACCESS
select HAVE_ARCH_TRACEHOOK
select HAVE_C_RECORDMCOUNT
select HAVE_DEBUG_KMEMLEAK
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_DYNAMIC_FTRACE
select HAVE_EXIT_THREAD
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_TRACER
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MOD_ARCH_SPECIFIC
select HAVE_OPROFILE
select HAVE_PERF_EVENTS
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UNDERSCORE_SYMBOL_PREFIX
select IRQ_DOMAIN
select GENERIC_IRQ_EFFECTIVE_AFF_MASK
select MODULES_USE_ELF_RELA
select OF
select OF_EARLY_FLATTREE
select SPARSE_IRQ
select CPU_NO_EFFICIENT_FFS
config STACKTRACE_SUPPORT
def_bool y
config LOCKDEP_SUPPORT
def_bool y
config RWSEM_GENERIC_SPINLOCK
def_bool y
config RWSEM_XCHGADD_ALGORITHM
bool
config GENERIC_HWEIGHT
def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
config NO_IOPORT_MAP
def_bool y
source "init/Kconfig"
source "kernel/Kconfig.freezer"
menu "Processor type and features"
config MMU
def_bool y
config STACK_GROWSUP
def_bool y
config HOTPLUG_CPU
bool "Enable CPU hotplug support"
depends on SMP
help
Say Y here to allow turning CPUs off and on. CPUs can be
controlled through /sys/devices/system/cpu.
Say N if you want to disable CPU hotplug.
config HIGHMEM
bool "High Memory Support"
help
The address space of Meta processors is only 4 Gigabytes large
and it has to accommodate user address space, kernel address
space as well as some memory mapped IO. That means that, if you
have a large amount of physical memory and/or IO, not all of the
memory can be "permanently mapped" by the kernel. The physical
memory that is not permanently mapped is called "high memory".
Depending on the selected kernel/user memory split, minimum
vmalloc space and actual amount of RAM, you may not need this
option which should result in a slightly faster kernel.
If unsure, say n.
source "arch/metag/mm/Kconfig"
source "arch/metag/Kconfig.soc"
config METAG_META12
bool
help
Select this from the SoC config symbol to indicate that it contains a
Meta 1.2 core.
config METAG_META21
bool
help
Select this from the SoC config symbol to indicate that it contains a
Meta 2.1 core.
config SMP
bool "Symmetric multi-processing support"
depends on METAG_META21 && METAG_META21_MMU
help
This enables support for systems with more than one thread running
Linux. If you have a system with only one thread running Linux,
say N. Otherwise, say Y.
config NR_CPUS
int "Maximum number of CPUs (2-4)" if SMP
range 2 4 if SMP
default "1" if !SMP
default "4" if SMP
config METAG_SMP_WRITE_REORDERING
bool
help
This attempts to prevent cache-memory incoherence due to external
reordering of writes from different hardware threads when SMP is
enabled. It adds fences (system event 0) to smp_mb and smp_rmb in an
attempt to catch some of the cases, and also before writes to shared
memory in LOCK1 protected atomics and spinlocks.
This will not completely prevent cache incoherency on affected cores.
config METAG_LNKGET_AROUND_CACHE
bool
depends on METAG_META21
help
This indicates that the LNKGET/LNKSET instructions go around the
cache, which requires some extra cache flushes when the memory needs
to be accessed by normal GET/SET instructions too.
choice
prompt "Atomicity primitive"
default METAG_ATOMICITY_LNKGET
help
This option selects the mechanism for performing atomic operations.
config METAG_ATOMICITY_IRQSOFF
depends on !SMP
bool "irqsoff"
help
This option disables interrupts to achieve atomicity. This mechanism
is not SMP-safe.
config METAG_ATOMICITY_LNKGET
depends on METAG_META21
bool "lnkget/lnkset"
help
This option uses the LNKGET and LNKSET instructions to achieve
atomicity. LNKGET/LNKSET are load-link/store-conditional instructions.
Choose this option if your system requires low latency.
config METAG_ATOMICITY_LOCK1
depends on SMP
bool "lock1"
help
This option uses the LOCK1 instruction for atomicity. This is mainly
provided as a debugging aid if the lnkget/lnkset atomicity primitive
isn't working properly.
endchoice
config METAG_FPU
bool "FPU Support"
depends on METAG_META21
default y
help
This option allows processes to use FPU hardware available with this
CPU. If this option is not enabled FPU registers will not be saved
and restored on context-switch.
If you plan on running programs which are compiled to use hard floats
say Y here.
config METAG_DSP
bool "DSP Support"
help
This option allows processes to use DSP hardware available
with this CPU. If this option is not enabled DSP registers
will not be saved and restored on context-switch.
If you plan on running DSP programs say Y here.
config METAG_PERFCOUNTER_IRQS
bool "PerfCounters interrupt support"
depends on METAG_META21
help
This option enables using interrupts to collect information from
Performance Counters. This option is supported in new META21
(starting from HTP265).
When disabled, Performance Counters information will be collected
based on Timer Interrupt.
config HW_PERF_EVENTS
def_bool METAG_PERFCOUNTER_IRQS && PERF_EVENTS
config METAG_DA
bool "DA support"
help
Say Y if you plan to use a DA debug adapter with Linux. The presence
of the DA will be detected automatically at boot, so it is safe to say
Y to this option even when booting without a DA.
This enables support for services provided by DA JTAG debug adapters,
such as:
- communication over DA channels (such as the console driver).
- use of the DA filesystem.
menu "Boot options"
config METAG_BUILTIN_DTB
bool "Embed DTB in kernel image"
default y
help
Embeds a device tree binary in the kernel image.
config METAG_BUILTIN_DTB_NAME
string "Built in DTB"
depends on METAG_BUILTIN_DTB
help
Set the name of the DTB to embed (leave blank to pick one
automatically based on kernel configuration).
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Kernel command line"
depends on CMDLINE_BOOL
help
On some architectures there is currently no way for the boot loader
to pass arguments to the kernel. For these architectures, you should
supply some command-line options at build time by entering them
here.
config CMDLINE_FORCE
bool "Force default kernel command string"
depends on CMDLINE_BOOL
help
Set this to have arguments from the default kernel command string
override those passed by the boot loader.
endmenu
source "kernel/Kconfig.preempt"
source kernel/Kconfig.hz
endmenu
menu "Power management options"
source kernel/power/Kconfig
endmenu
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/metag/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"