linux/arch/powerpc/kvm/Kconfig
Paul Mackerras 76d837a4c0 KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms
Commit e91aa8e6ec ("KVM: PPC: Enable IOMMU_API for KVM_BOOK3S_64
permanently", 2017-03-22) enabled the SPAPR TCE code for all 64-bit
Book 3S kernel configurations in order to simplify the code and
reduce #ifdefs.  However, 64-bit Book 3S PPC platforms other than
pseries and powernv don't implement the necessary IOMMU callbacks,
leading to build failures like the following (for a pasemi config):

scripts/kconfig/conf  --silentoldconfig Kconfig
warning: (KVM_BOOK3S_64) selects SPAPR_TCE_IOMMU which has unmet direct dependencies (IOMMU_SUPPORT && (PPC_POWERNV || PPC_PSERIES))

...

  CC [M]  arch/powerpc/kvm/book3s_64_vio.o
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_64_vio.c: In function ‘kvmppc_clear_tce’:
/home/paulus/kernel/kvm/arch/powerpc/kvm/book3s_64_vio.c:363:2: error: implicit declaration of function ‘iommu_tce_xchg’ [-Werror=implicit-function-declaration]
  iommu_tce_xchg(tbl, entry, &hpa, &dir);
  ^

To fix this, we make the inclusion of the SPAPR TCE support, and the
code that uses it in book3s_vio.c and book3s_vio_hv.c, depend on
the inclusion of support for the pseries and/or powernv platforms.
This means that when running a 'pseries' guest on those platforms,
the guest won't have in-kernel acceleration of the PAPR TCE hypercalls,
but at least now they compile.

Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-05-12 15:32:30 +10:00

208 lines
5.9 KiB
Plaintext

#
# KVM configuration
#
source "virt/kvm/Kconfig"
menuconfig VIRTUALIZATION
bool "Virtualization"
---help---
Say Y here to get to see options for using your Linux host to run
other operating systems inside virtual machines (guests).
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and
disabled.
if VIRTUALIZATION
config KVM
bool
select PREEMPT_NOTIFIERS
select ANON_INODES
select HAVE_KVM_EVENTFD
select SRCU
select KVM_VFIO
select IRQ_BYPASS_MANAGER
select HAVE_KVM_IRQ_BYPASS
config KVM_BOOK3S_HANDLER
bool
config KVM_BOOK3S_32_HANDLER
bool
select KVM_BOOK3S_HANDLER
select KVM_MMIO
config KVM_BOOK3S_64_HANDLER
bool
select KVM_BOOK3S_HANDLER
config KVM_BOOK3S_PR_POSSIBLE
bool
select KVM_MMIO
select MMU_NOTIFIER
config KVM_BOOK3S_HV_POSSIBLE
bool
config KVM_BOOK3S_32
tristate "KVM support for PowerPC book3s_32 processors"
depends on PPC_BOOK3S_32 && !SMP && !PTE_64BIT
select KVM
select KVM_BOOK3S_32_HANDLER
select KVM_BOOK3S_PR_POSSIBLE
---help---
Support running unmodified book3s_32 guest kernels
in virtual machines on book3s_32 host processors.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
If unsure, say N.
config KVM_BOOK3S_64
tristate "KVM support for PowerPC book3s_64 processors"
depends on PPC_BOOK3S_64
select KVM_BOOK3S_64_HANDLER
select KVM
select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
select SPAPR_TCE_IOMMU if IOMMU_SUPPORT && (PPC_SERIES || PPC_POWERNV)
---help---
Support running unmodified book3s_64 and book3s_32 guest kernels
in virtual machines on book3s_64 host processors.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
If unsure, say N.
config KVM_BOOK3S_64_HV
tristate "KVM for POWER7 and later using hypervisor mode in host"
depends on KVM_BOOK3S_64 && PPC_POWERNV
select KVM_BOOK3S_HV_POSSIBLE
select MMU_NOTIFIER
select CMA
---help---
Support running unmodified book3s_64 guest kernels in
virtual machines on POWER7 and newer processors that have
hypervisor mode available to the host.
If you say Y here, KVM will use the hardware virtualization
facilities of POWER7 (and later) processors, meaning that
guest operating systems will run at full hardware speed
using supervisor and user modes. However, this also means
that KVM is not usable under PowerVM (pHyp), is only usable
on POWER7 or later processors, and cannot emulate a
different processor from the host processor.
If unsure, say N.
config KVM_BOOK3S_64_PR
tristate "KVM support without using hypervisor mode in host"
depends on KVM_BOOK3S_64
select KVM_BOOK3S_PR_POSSIBLE
---help---
Support running guest kernels in virtual machines on processors
without using hypervisor mode in the host, by running the
guest in user mode (problem state) and emulating all
privileged instructions and registers.
This is not as fast as using hypervisor mode, but works on
machines where hypervisor mode is not available or not usable,
and can emulate processors that are different from the host
processor, including emulating 32-bit processors on a 64-bit
host.
config KVM_BOOK3S_HV_EXIT_TIMING
bool "Detailed timing for hypervisor real-mode code"
depends on KVM_BOOK3S_HV_POSSIBLE && DEBUG_FS
---help---
Calculate time taken for each vcpu in the real-mode guest entry,
exit, and interrupt handling code, plus time spent in the guest
and in nap mode due to idle (cede) while other threads are still
in the guest. The total, minimum and maximum times in nanoseconds
together with the number of executions are reported in debugfs in
kvm/vm#/vcpu#/timings. The overhead is of the order of 30 - 40
ns per exit on POWER8.
If unsure, say N.
config KVM_BOOKE_HV
bool
config KVM_EXIT_TIMING
bool "Detailed exit timing"
depends on KVM_E500V2 || KVM_E500MC
---help---
Calculate elapsed time for every exit/enter cycle. A per-vcpu
report is available in debugfs kvm/vm#_vcpu#_timing.
The overhead is relatively small, however it is not recommended for
production environments.
If unsure, say N.
config KVM_E500V2
bool "KVM support for PowerPC E500v2 processors"
depends on E500 && !PPC_E500MC
select KVM
select KVM_MMIO
select MMU_NOTIFIER
---help---
Support running unmodified E500 guest kernels in virtual machines on
E500v2 host processors.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
If unsure, say N.
config KVM_E500MC
bool "KVM support for PowerPC E500MC/E5500/E6500 processors"
depends on PPC_E500MC
select KVM
select KVM_MMIO
select KVM_BOOKE_HV
select MMU_NOTIFIER
---help---
Support running unmodified E500MC/E5500/E6500 guest kernels in
virtual machines on E500MC/E5500/E6500 host processors.
This module provides access to the hardware capabilities through
a character device node named /dev/kvm.
If unsure, say N.
config KVM_MPIC
bool "KVM in-kernel MPIC emulation"
depends on KVM && E500
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQFD
select HAVE_KVM_IRQ_ROUTING
select HAVE_KVM_MSI
help
Enable support for emulating MPIC devices inside the
host kernel, rather than relying on userspace to emulate.
Currently, support is limited to certain versions of
Freescale's MPIC implementation.
config KVM_XICS
bool "KVM in-kernel XICS emulation"
depends on KVM_BOOK3S_64 && !KVM_MPIC
select HAVE_KVM_IRQCHIP
select HAVE_KVM_IRQFD
default y
---help---
Include support for the XICS (eXternal Interrupt Controller
Specification) interrupt controller architecture used on
IBM POWER (pSeries) servers.
config KVM_XIVE
bool
default y
depends on KVM_XICS && PPC_XIVE_NATIVE && KVM_BOOK3S_HV_POSSIBLE
source drivers/vhost/Kconfig
endif # VIRTUALIZATION