mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
05e487d905
The WDT's BITE_TIME warm-reset behavior can be leveraged as a last resort mechanism for triggering chip reset. Usually, other restart methods (such as PS_HOLD) are preferrable for issuing a more complete reset of the chip. As such, keep the priority of the watchdog notifier low. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
224 lines
5.5 KiB
C
224 lines
5.5 KiB
C
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define WDT_RST 0x0
|
|
#define WDT_EN 0x8
|
|
#define WDT_BITE_TIME 0x24
|
|
|
|
struct qcom_wdt {
|
|
struct watchdog_device wdd;
|
|
struct clk *clk;
|
|
unsigned long rate;
|
|
struct notifier_block restart_nb;
|
|
void __iomem *base;
|
|
};
|
|
|
|
static inline
|
|
struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
|
|
{
|
|
return container_of(wdd, struct qcom_wdt, wdd);
|
|
}
|
|
|
|
static int qcom_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
writel(0, wdt->base + WDT_EN);
|
|
writel(1, wdt->base + WDT_RST);
|
|
writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
|
|
writel(1, wdt->base + WDT_EN);
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
writel(0, wdt->base + WDT_EN);
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct qcom_wdt *wdt = to_qcom_wdt(wdd);
|
|
|
|
writel(1, wdt->base + WDT_RST);
|
|
return 0;
|
|
}
|
|
|
|
static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
wdd->timeout = timeout;
|
|
return qcom_wdt_start(wdd);
|
|
}
|
|
|
|
static const struct watchdog_ops qcom_wdt_ops = {
|
|
.start = qcom_wdt_start,
|
|
.stop = qcom_wdt_stop,
|
|
.ping = qcom_wdt_ping,
|
|
.set_timeout = qcom_wdt_set_timeout,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct watchdog_info qcom_wdt_info = {
|
|
.options = WDIOF_KEEPALIVEPING
|
|
| WDIOF_MAGICCLOSE
|
|
| WDIOF_SETTIMEOUT,
|
|
.identity = KBUILD_MODNAME,
|
|
};
|
|
|
|
static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action,
|
|
void *data)
|
|
{
|
|
struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb);
|
|
u32 timeout;
|
|
|
|
/*
|
|
* Trigger watchdog bite:
|
|
* Setup BITE_TIME to be 128ms, and enable WDT.
|
|
*/
|
|
timeout = 128 * wdt->rate / 1000;
|
|
|
|
writel(0, wdt->base + WDT_EN);
|
|
writel(1, wdt->base + WDT_RST);
|
|
writel(timeout, wdt->base + WDT_BITE_TIME);
|
|
writel(1, wdt->base + WDT_EN);
|
|
|
|
/*
|
|
* Actually make sure the above sequence hits hardware before sleeping.
|
|
*/
|
|
wmb();
|
|
|
|
msleep(150);
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int qcom_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct qcom_wdt *wdt;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
wdt->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(wdt->base))
|
|
return PTR_ERR(wdt->base);
|
|
|
|
wdt->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(wdt->clk)) {
|
|
dev_err(&pdev->dev, "failed to get input clock\n");
|
|
return PTR_ERR(wdt->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(wdt->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to setup clock\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* We use the clock rate to calculate the max timeout, so ensure it's
|
|
* not zero to avoid a divide-by-zero exception.
|
|
*
|
|
* WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
|
|
* that it would bite before a second elapses it's usefulness is
|
|
* limited. Bail if this is the case.
|
|
*/
|
|
wdt->rate = clk_get_rate(wdt->clk);
|
|
if (wdt->rate == 0 ||
|
|
wdt->rate > 0x10000000U) {
|
|
dev_err(&pdev->dev, "invalid clock rate\n");
|
|
ret = -EINVAL;
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
wdt->wdd.dev = &pdev->dev;
|
|
wdt->wdd.info = &qcom_wdt_info;
|
|
wdt->wdd.ops = &qcom_wdt_ops;
|
|
wdt->wdd.min_timeout = 1;
|
|
wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
|
|
|
|
/*
|
|
* If 'timeout-sec' unspecified in devicetree, assume a 30 second
|
|
* default, unless the max timeout is less than 30 seconds, then use
|
|
* the max instead.
|
|
*/
|
|
wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
|
|
watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
|
|
|
|
ret = watchdog_register_device(&wdt->wdd);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register watchdog\n");
|
|
goto err_clk_unprepare;
|
|
}
|
|
|
|
/*
|
|
* WDT restart notifier has priority 0 (use as a last resort)
|
|
*/
|
|
wdt->restart_nb.notifier_call = qcom_wdt_restart;
|
|
ret = register_restart_handler(&wdt->restart_nb);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "failed to setup restart handler\n");
|
|
|
|
platform_set_drvdata(pdev, wdt);
|
|
return 0;
|
|
|
|
err_clk_unprepare:
|
|
clk_disable_unprepare(wdt->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int qcom_wdt_remove(struct platform_device *pdev)
|
|
{
|
|
struct qcom_wdt *wdt = platform_get_drvdata(pdev);
|
|
|
|
unregister_restart_handler(&wdt->restart_nb);
|
|
watchdog_unregister_device(&wdt->wdd);
|
|
clk_disable_unprepare(wdt->clk);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id qcom_wdt_of_table[] = {
|
|
{ .compatible = "qcom,kpss-wdt-msm8960", },
|
|
{ .compatible = "qcom,kpss-wdt-apq8064", },
|
|
{ .compatible = "qcom,kpss-wdt-ipq8064", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
|
|
|
|
static struct platform_driver qcom_watchdog_driver = {
|
|
.probe = qcom_wdt_probe,
|
|
.remove = qcom_wdt_remove,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.of_match_table = qcom_wdt_of_table,
|
|
},
|
|
};
|
|
module_platform_driver(qcom_watchdog_driver);
|
|
|
|
MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
|
|
MODULE_LICENSE("GPL v2");
|