linux/drivers/bcma/driver_pci_host.c
Hauke Mehrtens f4a83e578e bcma: change max PCI read request size to 128
This PCIe controller does not support a max read request size above 128
bytes. The sold card I tested this controller with used 128 as default
value, but some new routers are sold with BCM4331 chips, which have a
default max read request size of 512. This device fails at the first
DMA reqeust whch is bigger than 126 bytes.

This patch changes the max read request size to 128 for every device on
the PCIe link.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26 14:09:02 -04:00

623 lines
17 KiB
C

/*
* Broadcom specific AMBA
* PCI Core in hostmode
*
* Copyright 2005 - 2011, Broadcom Corporation
* Copyright 2006, 2007, Michael Buesch <m@bues.ch>
* Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include "bcma_private.h"
#include <linux/pci.h>
#include <linux/export.h>
#include <linux/bcma/bcma.h>
#include <asm/paccess.h>
/* Probe a 32bit value on the bus and catch bus exceptions.
* Returns nonzero on a bus exception.
* This is MIPS specific */
#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr)))
/* Assume one-hot slot wiring */
#define BCMA_PCI_SLOT_MAX 16
#define PCI_CONFIG_SPACE_SIZE 256
bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
{
struct bcma_bus *bus = pc->core->bus;
u16 chipid_top;
u32 tmp;
chipid_top = (bus->chipinfo.id & 0xFF00);
if (chipid_top != 0x4700 &&
chipid_top != 0x5300)
return false;
bcma_core_enable(pc->core, 0);
return !mips_busprobe32(tmp, pc->core->io_addr);
}
static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address)
{
pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA);
}
static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address,
u32 data)
{
pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address);
pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR);
pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data);
}
static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev,
unsigned int func, unsigned int off)
{
u32 addr = 0;
/* Issue config commands only when the data link is up (atleast
* one external pcie device is present).
*/
if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG)
& BCMA_CORE_PCI_DLLP_LSREG_LINKUP))
goto out;
/* Type 0 transaction */
/* Slide the PCI window to the appropriate slot */
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
/* Calculate the address */
addr = pc->host_controller->host_cfg_addr;
addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT);
addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT);
addr |= (off & ~3);
out:
return addr;
}
static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev,
unsigned int func, unsigned int off,
void *buf, int len)
{
int err = -EINVAL;
u32 addr, val;
void __iomem *mmio = 0;
WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
if (dev == 0) {
/* we support only two functions on device 0 */
if (func > 1)
goto out;
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
if (off >= PCI_CONFIG_SPACE_SIZE) {
addr = (func << 12);
addr |= (off & 0x0FFC);
val = bcma_pcie_read_config(pc, addr);
} else {
addr = BCMA_CORE_PCI_PCICFG0;
addr |= (func << 8);
addr |= (off & 0xFC);
val = pcicore_read32(pc, addr);
}
} else {
addr = bcma_get_cfgspace_addr(pc, dev, func, off);
if (unlikely(!addr))
goto out;
err = -ENOMEM;
mmio = ioremap_nocache(addr, sizeof(val));
if (!mmio)
goto out;
if (mips_busprobe32(val, mmio)) {
val = 0xFFFFFFFF;
goto unmap;
}
}
val >>= (8 * (off & 3));
switch (len) {
case 1:
*((u8 *)buf) = (u8)val;
break;
case 2:
*((u16 *)buf) = (u16)val;
break;
case 4:
*((u32 *)buf) = (u32)val;
break;
}
err = 0;
unmap:
if (mmio)
iounmap(mmio);
out:
return err;
}
static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev,
unsigned int func, unsigned int off,
const void *buf, int len)
{
int err = -EINVAL;
u32 addr, val;
void __iomem *mmio = 0;
u16 chipid = pc->core->bus->chipinfo.id;
WARN_ON(!pc->hostmode);
if (unlikely(len != 1 && len != 2 && len != 4))
goto out;
if (dev == 0) {
/* we support only two functions on device 0 */
if (func > 1)
goto out;
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
if (off >= PCI_CONFIG_SPACE_SIZE) {
addr = (func << 12);
addr |= (off & 0x0FFC);
val = bcma_pcie_read_config(pc, addr);
} else {
addr = BCMA_CORE_PCI_PCICFG0;
addr |= (func << 8);
addr |= (off & 0xFC);
val = pcicore_read32(pc, addr);
}
} else {
addr = bcma_get_cfgspace_addr(pc, dev, func, off);
if (unlikely(!addr))
goto out;
err = -ENOMEM;
mmio = ioremap_nocache(addr, sizeof(val));
if (!mmio)
goto out;
if (mips_busprobe32(val, mmio)) {
val = 0xFFFFFFFF;
goto unmap;
}
}
switch (len) {
case 1:
val &= ~(0xFF << (8 * (off & 3)));
val |= *((const u8 *)buf) << (8 * (off & 3));
break;
case 2:
val &= ~(0xFFFF << (8 * (off & 3)));
val |= *((const u16 *)buf) << (8 * (off & 3));
break;
case 4:
val = *((const u32 *)buf);
break;
}
if (dev == 0) {
/* accesses to config registers with offsets >= 256
* requires indirect access.
*/
if (off >= PCI_CONFIG_SPACE_SIZE)
bcma_pcie_write_config(pc, addr, val);
else
pcicore_write32(pc, addr, val);
} else {
writel(val, mmio);
if (chipid == BCMA_CHIP_ID_BCM4716 ||
chipid == BCMA_CHIP_ID_BCM4748)
readl(mmio);
}
err = 0;
unmap:
if (mmio)
iounmap(mmio);
out:
return err;
}
static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus,
unsigned int devfn,
int reg, int size, u32 *val)
{
unsigned long flags;
int err;
struct bcma_drv_pci *pc;
struct bcma_drv_pci_host *pc_host;
pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
pc = pc_host->pdev;
spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
err = bcma_extpci_read_config(pc, PCI_SLOT(devfn),
PCI_FUNC(devfn), reg, val, size);
spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus,
unsigned int devfn,
int reg, int size, u32 val)
{
unsigned long flags;
int err;
struct bcma_drv_pci *pc;
struct bcma_drv_pci_host *pc_host;
pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops);
pc = pc_host->pdev;
spin_lock_irqsave(&pc_host->cfgspace_lock, flags);
err = bcma_extpci_write_config(pc, PCI_SLOT(devfn),
PCI_FUNC(devfn), reg, &val, size);
spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags);
return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
}
/* return cap_offset if requested capability exists in the PCI config space */
static u8 bcma_find_pci_capability(struct bcma_drv_pci *pc, unsigned int dev,
unsigned int func, u8 req_cap_id,
unsigned char *buf, u32 *buflen)
{
u8 cap_id;
u8 cap_ptr = 0;
u32 bufsize;
u8 byte_val;
/* check for Header type 0 */
bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val,
sizeof(u8));
if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL)
return cap_ptr;
/* check if the capability pointer field exists */
bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val,
sizeof(u8));
if (!(byte_val & PCI_STATUS_CAP_LIST))
return cap_ptr;
/* check if the capability pointer is 0x00 */
bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr,
sizeof(u8));
if (cap_ptr == 0x00)
return cap_ptr;
/* loop thr'u the capability list and see if the requested capabilty
* exists */
bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8));
while (cap_id != req_cap_id) {
bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr,
sizeof(u8));
if (cap_ptr == 0x00)
return cap_ptr;
bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id,
sizeof(u8));
}
/* found the caller requested capability */
if ((buf != NULL) && (buflen != NULL)) {
u8 cap_data;
bufsize = *buflen;
if (!bufsize)
return cap_ptr;
*buflen = 0;
/* copy the cpability data excluding cap ID and next ptr */
cap_data = cap_ptr + 2;
if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE)
bufsize = PCI_CONFIG_SPACE_SIZE - cap_data;
*buflen = bufsize;
while (bufsize--) {
bcma_extpci_read_config(pc, dev, func, cap_data, buf,
sizeof(u8));
cap_data++;
buf++;
}
}
return cap_ptr;
}
/* If the root port is capable of returning Config Request
* Retry Status (CRS) Completion Status to software then
* enable the feature.
*/
static void bcma_core_pci_enable_crs(struct bcma_drv_pci *pc)
{
struct bcma_bus *bus = pc->core->bus;
u8 cap_ptr, root_ctrl, root_cap, dev;
u16 val16;
int i;
cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL,
NULL);
root_cap = cap_ptr + PCI_EXP_RTCAP;
bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16));
if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) {
/* Enable CRS software visibility */
root_ctrl = cap_ptr + PCI_EXP_RTCTL;
val16 = PCI_EXP_RTCTL_CRSSVE;
bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16,
sizeof(u16));
/* Initiate a configuration request to read the vendor id
* field of the device function's config space header after
* 100 ms wait time from the end of Reset. If the device is
* not done with its internal initialization, it must at
* least return a completion TLP, with a completion status
* of "Configuration Request Retry Status (CRS)". The root
* complex must complete the request to the host by returning
* a read-data value of 0001h for the Vendor ID field and
* all 1s for any additional bytes included in the request.
* Poll using the config reads for max wait time of 1 sec or
* until we receive the successful completion status. Repeat
* the procedure for all the devices.
*/
for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) {
for (i = 0; i < 100000; i++) {
bcma_extpci_read_config(pc, dev, 0,
PCI_VENDOR_ID, &val16,
sizeof(val16));
if (val16 != 0x1)
break;
udelay(10);
}
if (val16 == 0x1)
bcma_err(bus, "PCI: Broken device in slot %d\n",
dev);
}
}
}
void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
{
struct bcma_bus *bus = pc->core->bus;
struct bcma_drv_pci_host *pc_host;
u32 tmp;
u32 pci_membase_1G;
unsigned long io_map_base;
bcma_info(bus, "PCIEcore in host mode found\n");
if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
bcma_info(bus, "This PCIE core is disabled and not working\n");
return;
}
pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
if (!pc_host) {
bcma_err(bus, "can not allocate memory");
return;
}
spin_lock_init(&pc_host->cfgspace_lock);
pc->host_controller = pc_host;
pc_host->pci_controller.io_resource = &pc_host->io_resource;
pc_host->pci_controller.mem_resource = &pc_host->mem_resource;
pc_host->pci_controller.pci_ops = &pc_host->pci_ops;
pc_host->pdev = pc;
pci_membase_1G = BCMA_SOC_PCI_DMA;
pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG;
pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config;
pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config;
pc_host->mem_resource.name = "BCMA PCIcore external memory",
pc_host->mem_resource.start = BCMA_SOC_PCI_DMA;
pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1;
pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
pc_host->io_resource.name = "BCMA PCIcore external I/O",
pc_host->io_resource.start = 0x100;
pc_host->io_resource.end = 0x7FF;
pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
/* Reset RC */
usleep_range(3000, 5000);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
msleep(50);
pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
BCMA_CORE_PCI_CTL_RST_OE);
/* 64 MB I/O access window. On 4716, use
* sbtopcie0 to access the device registers. We
* can't use address match 2 (1 GB window) region
* as mips can't generate 64-bit address on the
* backplane.
*/
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4716 ||
bus->chipinfo.id == BCMA_CHIP_ID_BCM4748) {
pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM);
} else if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
tmp = BCMA_CORE_PCI_SBTOPCI_MEM;
tmp |= BCMA_CORE_PCI_SBTOPCI_PREF;
tmp |= BCMA_CORE_PCI_SBTOPCI_BURST;
if (pc->core->core_unit == 0) {
pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pc_host->io_resource.start = 0x100;
pc_host->io_resource.end = 0x47F;
pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
tmp | BCMA_SOC_PCI_MEM);
} else if (pc->core->core_unit == 1) {
pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
BCMA_SOC_PCI_MEM_SZ - 1;
pc_host->io_resource.start = 0x480;
pc_host->io_resource.end = 0x7FF;
pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
tmp | BCMA_SOC_PCI1_MEM);
}
} else
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
BCMA_CORE_PCI_SBTOPCI_IO);
/* 64 MB configuration access window */
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0);
/* 1 GB memory access window */
pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2,
BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G);
/* As per PCI Express Base Spec 1.1 we need to wait for
* at least 100 ms from the end of a reset (cold/warm/hot)
* before issuing configuration requests to PCI Express
* devices.
*/
msleep(100);
bcma_core_pci_enable_crs(pc);
if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 ||
bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) {
u16 val16;
bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
&val16, sizeof(val16));
val16 |= (2 << 5); /* Max payload size of 512 */
val16 |= (2 << 12); /* MRRS 512 */
bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL,
&val16, sizeof(val16));
}
/* Enable PCI bridge BAR0 memory & master access */
tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp));
/* Enable PCI interrupts */
pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA);
/* Ok, ready to run, register it to the system.
* The following needs change, if we want to port hostmode
* to non-MIPS platform. */
io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start,
resource_size(&pc_host->mem_resource));
pc_host->pci_controller.io_map_base = io_map_base;
set_io_port_base(pc_host->pci_controller.io_map_base);
/* Give some time to the PCI controller to configure itself with the new
* values. Not waiting at this point causes crashes of the machine. */
usleep_range(10000, 15000);
register_pci_controller(&pc_host->pci_controller);
return;
}
/* Early PCI fixup for a device on the PCI-core bridge. */
static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev)
{
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
return;
}
if (PCI_SLOT(dev->devfn) != 0)
return;
pr_info("PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
pr_err("PCI: BCMA bridge enable failed\n");
return;
}
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge);
/* Early PCI fixup for all PCI-cores to set the correct memory address. */
static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
{
struct resource *res;
int pos, err;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
return;
}
if (PCI_SLOT(dev->devfn) == 0)
return;
pr_info("PCI: Fixing up addresses %s\n", pci_name(dev));
for (pos = 0; pos < 6; pos++) {
res = &dev->resource[pos];
if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
err = pci_assign_resource(dev, pos);
if (err)
pr_err("PCI: Problem fixing up the addresses on %s\n",
pci_name(dev));
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int bcma_core_pci_plat_dev_init(struct pci_dev *dev)
{
struct bcma_drv_pci_host *pc_host;
int readrq;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
}
pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
pci_ops);
pr_info("PCI: Fixing up device %s\n", pci_name(dev));
/* Fix up interrupt lines */
dev->irq = bcma_core_irq(pc_host->pdev->core);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
readrq = pcie_get_readrq(dev);
if (readrq > 128) {
pr_info("change PCIe max read request size from %i to 128\n", readrq);
pcie_set_readrq(dev, 128);
}
return 0;
}
EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
/* PCI device IRQ mapping. */
int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev)
{
struct bcma_drv_pci_host *pc_host;
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
}
pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
pci_ops);
return bcma_core_irq(pc_host->pdev->core);
}
EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);