linux/arch/arm/boot/dts/r8a73a4.dtsi
Kevin Hilman 7587b5965f Changes needed to prepare for making omap3 device tree only:
- Always build in board-generic, and add pdata quirks and auxdata
   support for it so we have all the pdata related quirks
   in the same place.
 
 - Merge of the drivers/pinctrl changes that are needed for PM
   to continue working on omap3 and also needed for other omaps
   eventually. The three pinctrl related patches have been acked
   by Linus Walleij and are pulled into both the pinctrl tree
   and this branch.
 
 - Few defconfig related changes for drivers needed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSWIMoAAoJEBvUPslcq6VzudIQAKVjdFI26yxmI3xpYjNVS2P8
 JWaUTTjHAR7Lc0EWwtuGj6CqCtbNXUH1bTnChQrkzhT7fPMGQGFbgErnoaYQdwwJ
 qI15T7qcwy4q54vzeaOMAUS9UNZzr4lChEvxt9uYNoEhHlu7i6/ntyk5fgRfHMsh
 yK439VA7W/2rLNinpUmIAghx6+gUuRIBbVtfJ71gg5roXL7fY2hYizEoIkDKqWSD
 i1F24Xt33LAjNhy3n4/6JxCldee7ib2z0YrOUOrTdXWh/L1G9tDTslkdga6rAA5c
 A+B4nP7zP7i9c1SlTPbwRyguwjHhfSPuNTRhyhuePbwVk4bscglQZx8A7dH8BwS0
 pSCUxCTe2+CPEEzeN/ee9TgXwyX9Ab/r5BM092xFrX2lBbV3KxPl1F7rAxJ4HQTu
 Bh/M5bnKGupO7H9MOKqmLAf1y3a3JCrXVUuQljDMJnvauB8QFTx0nYQvZ/bQCJLZ
 /wfADHtooJ/FGHFS7Vb+HSLX7ifF2HyES9FgnQag5H77VfXS+bqI5yHsTcYHTgP1
 MlW8mObg0vJ+oUuowhhrk9pzQ1l1VFIaMqOKOouL3X6GHAHFiBSCti1fRiSE7d4U
 feW7a0NSyIjue+MAwxCjSLXOpHCATgnQ1mp9s8ByD0IF98iPugpnp9d6NGH/wp9A
 bgK7SGeOWXGoc+kN672c
 =bqsS
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

From Tony Lindgren:
Changes needed to prepare for making omap3 device tree only:

- Always build in board-generic, and add pdata quirks and auxdata
  support for it so we have all the pdata related quirks
  in the same place.

- Merge of the drivers/pinctrl changes that are needed for PM
  to continue working on omap3 and also needed for other omaps
  eventually. The three pinctrl related patches have been acked
  by Linus Walleij and are pulled into both the pinctrl tree
  and this branch.

- Few defconfig related changes for drivers needed.

* tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits)
  ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies
  ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig
  ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it
  ARM: OMAP2+: Add minimal 8250 support for GPMC
  ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3
  ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
  ARM: OMAP2+: Add support for auxdata
  pinctrl: single: Add support for auxdata
  pinctrl: single: Add support for wake-up interrupts
  pinctrl: single: Prepare for supporting SoC specific features
  ARM: OMAP2+: igep0020: use display init from dss-common
  ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
  +Linux 3.12-rc4

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14 15:29:24 -07:00

274 lines
6.1 KiB
Plaintext

/*
* Device Tree Source for the r8a73a4 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a73a4";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>,
<0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
<0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
<0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
<0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
<0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
<0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
<0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
};
irqc1: interrupt-controller@e61c0200 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
<0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
<0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
<0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
<0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
<0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
<0 56 4>, <0 57 4>;
};
dmac: dma-multiplexer@0 {
compatible = "renesas,shdma-mux";
#dma-cells = <1>;
dma-channels = <20>;
dma-requests = <256>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma0: dma-controller@e6700020 {
compatible = "renesas,shdma-r8a73a4";
reg = <0 0xe6700020 0 0x89e0>;
interrupt-parent = <&gic>;
interrupts = <0 220 4
0 200 4
0 201 4
0 202 4
0 203 4
0 204 4
0 205 4
0 206 4
0 207 4
0 208 4
0 209 4
0 210 4
0 211 4
0 212 4
0 213 4
0 214 4
0 215 4
0 216 4
0 217 4
0 218 4
0 219 4>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15",
"ch16", "ch17", "ch18", "ch19";
};
};
thermal@e61f0000 {
compatible = "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 174 0x4>;
status = "disabled";
};
i2c1: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 175 0x4>;
status = "disabled";
};
i2c2: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 176 0x4>;
status = "disabled";
};
i2c3: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 177 0x4>;
status = "disabled";
};
i2c4: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 178 0x4>;
status = "disabled";
};
i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 179 0x4>;
status = "disabled";
};
i2c6: i2c@e6550000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 184 0x4>;
status = "disabled";
};
i2c7: i2c@e6560000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 185 0x4>;
status = "disabled";
};
i2c8: i2c@e6570000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 173 0x4>;
status = "disabled";
};
mmcif0: mmcif@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 169 0x4>;
reg-io-width = <4>;
status = "disabled";
};
mmcif1: mmcif@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 170 0x4>;
reg-io-width = <4>;
status = "disabled";
};
pfc: pfc@e6050000 {
compatible = "renesas,pfc-r8a73a4";
reg = <0 0xe6050000 0 0x9000>;
gpio-controller;
#gpio-cells = <2>;
};
sdhi0: sdhi@ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi1: sdhi@ee120000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
status = "disabled";
};
sdhi2: sdhi@ee140000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
cap-sd-highspeed;
status = "disabled";
};
};