linux/drivers/net/wireless/iwlwifi/iwl-core.c
Johannes Berg ea196fdbb9 iwlwifi: fix and describe iwl_adjust_beacon_interval
The iwl_adjust_beacon_interval function is a bit
of black magic, so add comments to it describing
what it does. Also, in the case when there's no
beacon interval set, program the default into
the device (instead of adjusting, which results
in the max) since using the max in that case
interacts badly with dual-mode/PAN parameters.

Also update the PAN parameters accordingly and
use the same constant as here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-11 08:52:01 -07:00

3009 lines
83 KiB
C

/******************************************************************************
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h" /* FIXME: remove */
#include "iwl-debug.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-power.h"
#include "iwl-sta.h"
#include "iwl-helpers.h"
MODULE_DESCRIPTION("iwl core");
MODULE_VERSION(IWLWIFI_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
/*
* set bt_coex_active to true, uCode will do kill/defer
* every time the priority line is asserted (BT is sending signals on the
* priority line in the PCIx).
* set bt_coex_active to false, uCode will ignore the BT activity and
* perform the normal operation
*
* User might experience transmit issue on some platform due to WiFi/BT
* co-exist problem. The possible behaviors are:
* Able to scan and finding all the available AP
* Not able to associate with any AP
* On those platforms, WiFi communication can be restored by set
* "bt_coex_active" module parameter to "false"
*
* default: bt_coex_active = true (BT_COEX_ENABLE)
*/
bool bt_coex_active = true;
EXPORT_SYMBOL_GPL(bt_coex_active);
module_param(bt_coex_active, bool, S_IRUGO);
MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist");
#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
IWL_RATE_SISO_##s##M_PLCP, \
IWL_RATE_MIMO2_##s##M_PLCP,\
IWL_RATE_MIMO3_##s##M_PLCP,\
IWL_RATE_##r##M_IEEE, \
IWL_RATE_##ip##M_INDEX, \
IWL_RATE_##in##M_INDEX, \
IWL_RATE_##rp##M_INDEX, \
IWL_RATE_##rn##M_INDEX, \
IWL_RATE_##pp##M_INDEX, \
IWL_RATE_##np##M_INDEX }
u32 iwl_debug_level;
EXPORT_SYMBOL(iwl_debug_level);
/*
* Parameter order:
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
*
* If there isn't a valid next or previous rate then INV is used which
* maps to IWL_RATE_INVALID
*
*/
const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
/* FIXME:RS: ^^ should be INV (legacy) */
};
EXPORT_SYMBOL(iwl_rates);
int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
{
int idx = 0;
/* HT rate format */
if (rate_n_flags & RATE_MCS_HT_MSK) {
idx = (rate_n_flags & 0xff);
if (idx >= IWL_RATE_MIMO3_6M_PLCP)
idx = idx - IWL_RATE_MIMO3_6M_PLCP;
else if (idx >= IWL_RATE_MIMO2_6M_PLCP)
idx = idx - IWL_RATE_MIMO2_6M_PLCP;
idx += IWL_FIRST_OFDM_RATE;
/* skip 9M not supported in ht*/
if (idx >= IWL_RATE_9M_INDEX)
idx += 1;
if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
return idx;
/* legacy rate format, search for match in table */
} else {
for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
return idx;
}
return -1;
}
EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
{
int i;
u8 ind = ant;
if (priv->band == IEEE80211_BAND_2GHZ &&
priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
return 0;
for (i = 0; i < RATE_ANT_NUM - 1; i++) {
ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
if (valid & BIT(ind))
return ind;
}
return ant;
}
EXPORT_SYMBOL(iwl_toggle_tx_ant);
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
EXPORT_SYMBOL(iwl_bcast_addr);
/* This function both allocates and initializes hw and priv. */
struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
struct ieee80211_ops *hw_ops)
{
struct iwl_priv *priv;
/* mac80211 allocates memory for this device instance, including
* space for this driver's private structure */
struct ieee80211_hw *hw =
ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
if (hw == NULL) {
pr_err("%s: Can not allocate network device\n",
cfg->name);
goto out;
}
priv = hw->priv;
priv->hw = hw;
out:
return hw;
}
EXPORT_SYMBOL(iwl_alloc_all);
/*
* QoS support
*/
static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (!ctx->is_active)
return;
ctx->qos_data.def_qos_parm.qos_flags = 0;
if (ctx->qos_data.qos_active)
ctx->qos_data.def_qos_parm.qos_flags |=
QOS_PARAM_FLG_UPDATE_EDCA_MSK;
if (ctx->ht.enabled)
ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
ctx->qos_data.qos_active,
ctx->qos_data.def_qos_parm.qos_flags);
iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
sizeof(struct iwl_qosparam_cmd),
&ctx->qos_data.def_qos_parm, NULL);
}
#define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
#define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
struct ieee80211_sta_ht_cap *ht_info,
enum ieee80211_band band)
{
u16 max_bit_rate = 0;
u8 rx_chains_num = priv->hw_params.rx_chains_num;
u8 tx_chains_num = priv->hw_params.tx_chains_num;
ht_info->cap = 0;
memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
ht_info->ht_supported = true;
if (priv->cfg->ht_greenfield_support)
ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
max_bit_rate = MAX_BIT_RATE_20_MHZ;
if (priv->hw_params.ht40_channel & BIT(band)) {
ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
ht_info->cap |= IEEE80211_HT_CAP_SGI_40;
ht_info->mcs.rx_mask[4] = 0x01;
max_bit_rate = MAX_BIT_RATE_40_MHZ;
}
if (priv->cfg->mod_params->amsdu_size_8K)
ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU;
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
if (priv->cfg->ampdu_factor)
ht_info->ampdu_factor = priv->cfg->ampdu_factor;
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
if (priv->cfg->ampdu_density)
ht_info->ampdu_density = priv->cfg->ampdu_density;
ht_info->mcs.rx_mask[0] = 0xFF;
if (rx_chains_num >= 2)
ht_info->mcs.rx_mask[1] = 0xFF;
if (rx_chains_num >= 3)
ht_info->mcs.rx_mask[2] = 0xFF;
/* Highest supported Rx data rate */
max_bit_rate *= rx_chains_num;
WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK);
ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate);
/* Tx MCS capabilities */
ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
if (tx_chains_num != rx_chains_num) {
ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
ht_info->mcs.tx_params |= ((tx_chains_num - 1) <<
IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
}
}
/**
* iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
*/
int iwlcore_init_geos(struct iwl_priv *priv)
{
struct iwl_channel_info *ch;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *channels;
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n");
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
channels = kzalloc(sizeof(struct ieee80211_channel) *
priv->channel_count, GFP_KERNEL);
if (!channels)
return -ENOMEM;
rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY),
GFP_KERNEL);
if (!rates) {
kfree(channels);
return -ENOMEM;
}
/* 5.2GHz channels start after the 2.4GHz channels */
sband = &priv->bands[IEEE80211_BAND_5GHZ];
sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
/* just OFDM */
sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE;
if (priv->cfg->sku & IWL_SKU_N)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
IEEE80211_BAND_5GHZ);
sband = &priv->bands[IEEE80211_BAND_2GHZ];
sband->channels = channels;
/* OFDM & CCK */
sband->bitrates = rates;
sband->n_bitrates = IWL_RATE_COUNT_LEGACY;
if (priv->cfg->sku & IWL_SKU_N)
iwlcore_init_ht_hw_capab(priv, &sband->ht_cap,
IEEE80211_BAND_2GHZ);
priv->ieee_channels = channels;
priv->ieee_rates = rates;
for (i = 0; i < priv->channel_count; i++) {
ch = &priv->channel_info[i];
/* FIXME: might be removed if scan is OK */
if (!is_channel_valid(ch))
continue;
if (is_channel_a_band(ch))
sband = &priv->bands[IEEE80211_BAND_5GHZ];
else
sband = &priv->bands[IEEE80211_BAND_2GHZ];
geo_ch = &sband->channels[sband->n_channels++];
geo_ch->center_freq =
ieee80211_channel_to_frequency(ch->channel);
geo_ch->max_power = ch->max_power_avg;
geo_ch->max_antenna_gain = 0xff;
geo_ch->hw_value = ch->channel;
if (is_channel_valid(ch)) {
if (!(ch->flags & EEPROM_CHANNEL_IBSS))
geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if (ch->flags & EEPROM_CHANNEL_RADAR)
geo_ch->flags |= IEEE80211_CHAN_RADAR;
geo_ch->flags |= ch->ht40_extension_channel;
if (ch->max_power_avg > priv->tx_power_device_lmt)
priv->tx_power_device_lmt = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
ch->channel, geo_ch->center_freq,
is_channel_a_band(ch) ? "5.2" : "2.4",
geo_ch->flags & IEEE80211_CHAN_DISABLED ?
"restricted" : "valid",
geo_ch->flags);
}
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & IWL_SKU_A) {
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
"Please send your PCI ID 0x%04X:0x%04X to maintainer.\n",
priv->pci_dev->device,
priv->pci_dev->subsystem_device);
priv->cfg->sku &= ~IWL_SKU_A;
}
IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n",
priv->bands[IEEE80211_BAND_2GHZ].n_channels,
priv->bands[IEEE80211_BAND_5GHZ].n_channels);
set_bit(STATUS_GEO_CONFIGURED, &priv->status);
return 0;
}
EXPORT_SYMBOL(iwlcore_init_geos);
/*
* iwlcore_free_geos - undo allocations in iwlcore_init_geos
*/
void iwlcore_free_geos(struct iwl_priv *priv)
{
kfree(priv->ieee_channels);
kfree(priv->ieee_rates);
clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
}
EXPORT_SYMBOL(iwlcore_free_geos);
/*
* iwlcore_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
* function.
*/
void iwlcore_tx_cmd_protection(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
__le16 fc, __le32 *tx_flags)
{
if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
*tx_flags |= TX_CMD_FLG_RTS_MSK;
*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
if (!ieee80211_is_mgmt(fc))
return;
switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
case cpu_to_le16(IEEE80211_STYPE_AUTH):
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
*tx_flags |= TX_CMD_FLG_CTS_MSK;
break;
}
} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
*tx_flags |= TX_CMD_FLG_CTS_MSK;
*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
}
}
EXPORT_SYMBOL(iwlcore_tx_cmd_protection);
static bool is_single_rx_stream(struct iwl_priv *priv)
{
return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
priv->current_ht_config.single_chain_sufficient;
}
static bool iwl_is_channel_extension(struct iwl_priv *priv,
enum ieee80211_band band,
u16 channel, u8 extension_chan_offset)
{
const struct iwl_channel_info *ch_info;
ch_info = iwl_get_channel_info(priv, band, channel);
if (!is_channel_valid(ch_info))
return false;
if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE)
return !(ch_info->ht40_extension_channel &
IEEE80211_CHAN_NO_HT40PLUS);
else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW)
return !(ch_info->ht40_extension_channel &
IEEE80211_CHAN_NO_HT40MINUS);
return false;
}
bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
struct ieee80211_sta_ht_cap *ht_cap)
{
if (!ctx->ht.enabled || !ctx->ht.is_40mhz)
return false;
/*
* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
* the bit will not set if it is pure 40MHz case
*/
if (ht_cap && !ht_cap->ht_supported)
return false;
#ifdef CONFIG_IWLWIFI_DEBUGFS
if (priv->disable_ht40)
return false;
#endif
return iwl_is_channel_extension(priv, priv->band,
le16_to_cpu(ctx->staging.channel),
ctx->ht.extension_chan_offset);
}
EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val)
{
u16 new_val;
u16 beacon_factor;
/*
* If mac80211 hasn't given us a beacon interval, program
* the default into the device (not checking this here
* would cause the adjustment below to return the maximum
* value, which may break PAN.)
*/
if (!beacon_val)
return DEFAULT_BEACON_INTERVAL;
/*
* If the beacon interval we obtained from the peer
* is too large, we'll have to wake up more often
* (and in IBSS case, we'll beacon too much)
*
* For example, if max_beacon_val is 4096, and the
* requested beacon interval is 7000, we'll have to
* use 3500 to be able to wake up on the beacons.
*
* This could badly influence beacon detection stats.
*/
beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val;
new_val = beacon_val / beacon_factor;
if (!new_val)
new_val = max_beacon_val;
return new_val;
}
int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
u64 tsf;
s32 interval_tm, rem;
struct ieee80211_conf *conf = NULL;
u16 beacon_int;
struct ieee80211_vif *vif = ctx->vif;
conf = ieee80211_get_hw_conf(priv->hw);
lockdep_assert_held(&priv->mutex);
memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd));
ctx->timing.timestamp = cpu_to_le64(priv->timestamp);
ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval);
beacon_int = vif ? vif->bss_conf.beacon_int : 0;
/*
* TODO: For IBSS we need to get atim_window from mac80211,
* for now just always use 0
*/
ctx->timing.atim_window = 0;
if (ctx->ctxid == IWL_RXON_CTX_PAN &&
(!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) &&
iwl_is_associated(priv, IWL_RXON_CTX_BSS) &&
priv->contexts[IWL_RXON_CTX_BSS].vif &&
priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) {
ctx->timing.beacon_interval =
priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval;
beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
} else if (ctx->ctxid == IWL_RXON_CTX_BSS &&
iwl_is_associated(priv, IWL_RXON_CTX_PAN) &&
priv->contexts[IWL_RXON_CTX_PAN].vif &&
priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int &&
(!iwl_is_associated_ctx(ctx) || !ctx->vif ||
!ctx->vif->bss_conf.beacon_int)) {
ctx->timing.beacon_interval =
priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval;
beacon_int = le16_to_cpu(ctx->timing.beacon_interval);
} else {
beacon_int = iwl_adjust_beacon_interval(beacon_int,
priv->hw_params.max_beacon_itrvl * TIME_UNIT);
ctx->timing.beacon_interval = cpu_to_le16(beacon_int);
}
tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */
interval_tm = beacon_int * TIME_UNIT;
rem = do_div(tsf, interval_tm);
ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem);
ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1;
IWL_DEBUG_ASSOC(priv,
"beacon interval %d beacon timer %d beacon tim %d\n",
le16_to_cpu(ctx->timing.beacon_interval),
le32_to_cpu(ctx->timing.beacon_init_val),
le16_to_cpu(ctx->timing.atim_window));
return iwl_send_cmd_pdu(priv, ctx->rxon_timing_cmd,
sizeof(ctx->timing), &ctx->timing);
}
EXPORT_SYMBOL(iwl_send_rxon_timing);
void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
int hw_decrypt)
{
struct iwl_rxon_cmd *rxon = &ctx->staging;
if (hw_decrypt)
rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK;
else
rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK;
}
EXPORT_SYMBOL(iwl_set_rxon_hwcrypto);
/**
* iwl_check_rxon_cmd - validate RXON structure is valid
*
* NOTE: This is really only useful during development and can eventually
* be #ifdef'd out once the driver is stable and folks aren't actively
* making changes
*/
int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
int error = 0;
int counter = 1;
struct iwl_rxon_cmd *rxon = &ctx->staging;
if (rxon->flags & RXON_FLG_BAND_24G_MSK) {
error |= le32_to_cpu(rxon->flags &
(RXON_FLG_TGJ_NARROW_BAND_MSK |
RXON_FLG_RADAR_DETECT_MSK));
if (error)
IWL_WARN(priv, "check 24G fields %d | %d\n",
counter++, error);
} else {
error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ?
0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK);
if (error)
IWL_WARN(priv, "check 52 fields %d | %d\n",
counter++, error);
error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK);
if (error)
IWL_WARN(priv, "check 52 CCK %d | %d\n",
counter++, error);
}
error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1;
if (error)
IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error);
/* make sure basic rates 6Mbps and 1Mbps are supported */
error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) &&
((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0));
if (error)
IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error);
error |= (le16_to_cpu(rxon->assoc_id) > 2007);
if (error)
IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error);
error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK))
== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK));
if (error)
IWL_WARN(priv, "check CCK and short slot %d | %d\n",
counter++, error);
error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK))
== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK));
if (error)
IWL_WARN(priv, "check CCK & auto detect %d | %d\n",
counter++, error);
error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK |
RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK);
if (error)
IWL_WARN(priv, "check TGG and auto detect %d | %d\n",
counter++, error);
if (error)
IWL_WARN(priv, "Tuning to channel %d\n",
le16_to_cpu(rxon->channel));
if (error) {
IWL_ERR(priv, "Not a valid iwl_rxon_assoc_cmd field values\n");
return -1;
}
return 0;
}
EXPORT_SYMBOL(iwl_check_rxon_cmd);
/**
* iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
* @priv: staging_rxon is compared to active_rxon
*
* If the RXON structure is changing enough to require a new tune,
* or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
* a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
*/
int iwl_full_rxon_required(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
const struct iwl_rxon_cmd *staging = &ctx->staging;
const struct iwl_rxon_cmd *active = &ctx->active;
#define CHK(cond) \
if ((cond)) { \
IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n"); \
return 1; \
}
#define CHK_NEQ(c1, c2) \
if ((c1) != (c2)) { \
IWL_DEBUG_INFO(priv, "need full RXON - " \
#c1 " != " #c2 " - %d != %d\n", \
(c1), (c2)); \
return 1; \
}
/* These items are only settable from the full RXON command */
CHK(!iwl_is_associated_ctx(ctx));
CHK(compare_ether_addr(staging->bssid_addr, active->bssid_addr));
CHK(compare_ether_addr(staging->node_addr, active->node_addr));
CHK(compare_ether_addr(staging->wlap_bssid_addr,
active->wlap_bssid_addr));
CHK_NEQ(staging->dev_type, active->dev_type);
CHK_NEQ(staging->channel, active->channel);
CHK_NEQ(staging->air_propagation, active->air_propagation);
CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates,
active->ofdm_ht_single_stream_basic_rates);
CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates,
active->ofdm_ht_dual_stream_basic_rates);
CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates,
active->ofdm_ht_triple_stream_basic_rates);
CHK_NEQ(staging->assoc_id, active->assoc_id);
/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can
* be updated with the RXON_ASSOC command -- however only some
* flag transitions are allowed using RXON_ASSOC */
/* Check if we are not switching bands */
CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK,
active->flags & RXON_FLG_BAND_24G_MSK);
/* Check if we are switching association toggle */
CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK,
active->filter_flags & RXON_FILTER_ASSOC_MSK);
#undef CHK
#undef CHK_NEQ
return 0;
}
EXPORT_SYMBOL(iwl_full_rxon_required);
u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
/*
* Assign the lowest rate -- should really get this from
* the beacon skb from mac80211.
*/
if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK)
return IWL_RATE_1M_PLCP;
else
return IWL_RATE_6M_PLCP;
}
EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
static void _iwl_set_rxon_ht(struct iwl_priv *priv,
struct iwl_ht_config *ht_conf,
struct iwl_rxon_context *ctx)
{
struct iwl_rxon_cmd *rxon = &ctx->staging;
if (!ctx->ht.enabled) {
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
RXON_FLG_HT40_PROT_MSK |
RXON_FLG_HT_PROT_MSK);
return;
}
/* FIXME: if the definition of ht.protection changed, the "translation"
* will be needed for rxon->flags
*/
rxon->flags |= cpu_to_le32(ctx->ht.protection << RXON_FLG_HT_OPERATING_MODE_POS);
/* Set up channel bandwidth:
* 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
/* clear the HT channel mode before set the mode */
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) {
/* pure ht40 */
if (ctx->ht.protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
/* Note: control channel is opposite of extension channel */
switch (ctx->ht.extension_chan_offset) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
break;
}
} else {
/* Note: control channel is opposite of extension channel */
switch (ctx->ht.extension_chan_offset) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
break;
case IEEE80211_HT_PARAM_CHA_SEC_NONE:
default:
/* channel location only valid if in Mixed mode */
IWL_ERR(priv, "invalid extension channel offset\n");
break;
}
}
} else {
rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY;
}
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X "
"extension channel offset 0x%x\n",
le32_to_cpu(rxon->flags), ctx->ht.protection,
ctx->ht.extension_chan_offset);
}
void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
{
struct iwl_rxon_context *ctx;
for_each_context(priv, ctx)
_iwl_set_rxon_ht(priv, ht_conf, ctx);
}
EXPORT_SYMBOL(iwl_set_rxon_ht);
#define IWL_NUM_RX_CHAINS_MULTIPLE 3
#define IWL_NUM_RX_CHAINS_SINGLE 2
#define IWL_NUM_IDLE_CHAINS_DUAL 2
#define IWL_NUM_IDLE_CHAINS_SINGLE 1
/*
* Determine how many receiver/antenna chains to use.
*
* More provides better reception via diversity. Fewer saves power
* at the expense of throughput, but only when not in powersave to
* start with.
*
* MIMO (dual stream) requires at least 2, but works better with 3.
* This does not determine *which* chains to use, just how many.
*/
static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
{
if (priv->cfg->advanced_bt_coexist && (priv->bt_full_concurrent ||
priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
/*
* only use chain 'A' in bt high traffic load or
* full concurrency mode
*/
return IWL_NUM_RX_CHAINS_SINGLE;
}
/* # of Rx chains to use when expecting MIMO. */
if (is_single_rx_stream(priv))
return IWL_NUM_RX_CHAINS_SINGLE;
else
return IWL_NUM_RX_CHAINS_MULTIPLE;
}
/*
* When we are in power saving mode, unless device support spatial
* multiplexing power save, use the active count for rx chain count.
*/
static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
{
/* # Rx chains when idling, depending on SMPS mode */
switch (priv->current_ht_config.smps) {
case IEEE80211_SMPS_STATIC:
case IEEE80211_SMPS_DYNAMIC:
return IWL_NUM_IDLE_CHAINS_SINGLE;
case IEEE80211_SMPS_OFF:
return active_cnt;
default:
WARN(1, "invalid SMPS mode %d",
priv->current_ht_config.smps);
return active_cnt;
}
}
/* up to 4 chains */
static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
{
u8 res;
res = (chain_bitmap & BIT(0)) >> 0;
res += (chain_bitmap & BIT(1)) >> 1;
res += (chain_bitmap & BIT(2)) >> 2;
res += (chain_bitmap & BIT(3)) >> 3;
return res;
}
/**
* iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
*
* Selects how many and which Rx receivers/antennas/chains to use.
* This should not be used for scan command ... it puts data in wrong place.
*/
void iwl_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
bool is_single = is_single_rx_stream(priv);
bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
u32 active_chains;
u16 rx_chain;
/* Tell uCode which antennas are actually connected.
* Before first association, we assume all antennas are connected.
* Just after first association, iwl_chain_noise_calibration()
* checks which antennas actually *are* connected. */
if (priv->chain_noise_data.active_chains)
active_chains = priv->chain_noise_data.active_chains;
else
active_chains = priv->hw_params.valid_rx_ant;
if (priv->cfg->advanced_bt_coexist && (priv->bt_full_concurrent ||
priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
/*
* only use chain 'A' in bt high traffic load or
* full concurrency mode
*/
active_chains = first_antenna(active_chains);
}
rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
/* How many receivers should we use? */
active_rx_cnt = iwl_get_active_rx_chain_count(priv);
idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
/* correct rx chain count according hw settings
* and chain noise calibration
*/
valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
if (valid_rx_cnt < active_rx_cnt)
active_rx_cnt = valid_rx_cnt;
if (valid_rx_cnt < idle_rx_cnt)
idle_rx_cnt = valid_rx_cnt;
rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
ctx->staging.rx_chain = cpu_to_le16(rx_chain);
if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
else
ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
ctx->staging.rx_chain,
active_rx_cnt, idle_rx_cnt);
WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
active_rx_cnt < idle_rx_cnt);
}
EXPORT_SYMBOL(iwl_set_rxon_chain);
/* Return valid, unused, channel for a passive scan to reset the RF */
u8 iwl_get_single_channel_number(struct iwl_priv *priv,
enum ieee80211_band band)
{
const struct iwl_channel_info *ch_info;
int i;
u8 channel = 0;
u8 min, max;
struct iwl_rxon_context *ctx;
if (band == IEEE80211_BAND_5GHZ) {
min = 14;
max = priv->channel_count;
} else {
min = 0;
max = 14;
}
for (i = min; i < max; i++) {
bool busy = false;
for_each_context(priv, ctx) {
busy = priv->channel_info[i].channel ==
le16_to_cpu(ctx->staging.channel);
if (busy)
break;
}
if (busy)
continue;
channel = priv->channel_info[i].channel;
ch_info = iwl_get_channel_info(priv, band, channel);
if (is_channel_valid(ch_info))
break;
}
return channel;
}
EXPORT_SYMBOL(iwl_get_single_channel_number);
/**
* iwl_set_rxon_channel - Set the band and channel values in staging RXON
* @ch: requested channel as a pointer to struct ieee80211_channel
* NOTE: Does not commit to the hardware; it sets appropriate bit fields
* in the staging RXON flag structure based on the ch->band
*/
int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
struct iwl_rxon_context *ctx)
{
enum ieee80211_band band = ch->band;
u16 channel = ch->hw_value;
if ((le16_to_cpu(ctx->staging.channel) == channel) &&
(priv->band == band))
return 0;
ctx->staging.channel = cpu_to_le16(channel);
if (band == IEEE80211_BAND_5GHZ)
ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK;
else
ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
priv->band = band;
IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band);
return 0;
}
EXPORT_SYMBOL(iwl_set_rxon_channel);
void iwl_set_flags_for_band(struct iwl_priv *priv,
struct iwl_rxon_context *ctx,
enum ieee80211_band band,
struct ieee80211_vif *vif)
{
if (band == IEEE80211_BAND_5GHZ) {
ctx->staging.flags &=
~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK
| RXON_FLG_CCK_MSK);
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
} else {
/* Copied from iwl_post_associate() */
if (vif && vif->bss_conf.use_short_slot)
ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
else
ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
ctx->staging.flags |= RXON_FLG_BAND_24G_MSK;
ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK;
ctx->staging.flags &= ~RXON_FLG_CCK_MSK;
}
}
EXPORT_SYMBOL(iwl_set_flags_for_band);
/*
* initialize rxon structure with default values from eeprom
*/
void iwl_connection_init_rx_config(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
const struct iwl_channel_info *ch_info;
memset(&ctx->staging, 0, sizeof(ctx->staging));
if (!ctx->vif) {
ctx->staging.dev_type = ctx->unused_devtype;
} else switch (ctx->vif->type) {
case NL80211_IFTYPE_AP:
ctx->staging.dev_type = ctx->ap_devtype;
break;
case NL80211_IFTYPE_STATION:
ctx->staging.dev_type = ctx->station_devtype;
ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK;
break;
case NL80211_IFTYPE_ADHOC:
ctx->staging.dev_type = ctx->ibss_devtype;
ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK;
ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK |
RXON_FILTER_ACCEPT_GRP_MSK;
break;
default:
IWL_ERR(priv, "Unsupported interface type %d\n",
ctx->vif->type);
break;
}
#if 0
/* TODO: Figure out when short_preamble would be set and cache from
* that */
if (!hw_to_local(priv->hw)->short_preamble)
ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
else
ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
#endif
ch_info = iwl_get_channel_info(priv, priv->band,
le16_to_cpu(ctx->active.channel));
if (!ch_info)
ch_info = &priv->channel_info[0];
ctx->staging.channel = cpu_to_le16(ch_info->channel);
priv->band = ch_info->band;
iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif);
ctx->staging.ofdm_basic_rates =
(IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
ctx->staging.cck_basic_rates =
(IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
/* clear both MIX and PURE40 mode flag */
ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
RXON_FLG_CHANNEL_MODE_PURE_40);
if (ctx->vif)
memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN);
ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff;
ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff;
ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff;
}
EXPORT_SYMBOL(iwl_connection_init_rx_config);
void iwl_set_rate(struct iwl_priv *priv)
{
const struct ieee80211_supported_band *hw = NULL;
struct ieee80211_rate *rate;
struct iwl_rxon_context *ctx;
int i;
hw = iwl_get_hw_mode(priv, priv->band);
if (!hw) {
IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n");
return;
}
priv->active_rate = 0;
for (i = 0; i < hw->n_bitrates; i++) {
rate = &(hw->bitrates[i]);
if (rate->hw_value < IWL_RATE_COUNT_LEGACY)
priv->active_rate |= (1 << rate->hw_value);
}
IWL_DEBUG_RATE(priv, "Set active_rate = %0x\n", priv->active_rate);
for_each_context(priv, ctx) {
ctx->staging.cck_basic_rates =
(IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
ctx->staging.ofdm_basic_rates =
(IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
}
}
EXPORT_SYMBOL(iwl_set_rate);
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
{
/*
* MULTI-FIXME
* See iwl_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (priv->switch_rxon.switch_in_progress) {
ieee80211_chswitch_done(ctx->vif, is_success);
mutex_lock(&priv->mutex);
priv->switch_rxon.switch_in_progress = false;
mutex_unlock(&priv->mutex);
}
}
EXPORT_SYMBOL(iwl_chswitch_done);
void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
/*
* MULTI-FIXME
* See iwl_mac_channel_switch.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwl_rxon_cmd *rxon = (void *)&ctx->active;
if (priv->switch_rxon.switch_in_progress) {
if (!le32_to_cpu(csa->status) &&
(csa->channel == priv->switch_rxon.channel)) {
rxon->channel = csa->channel;
ctx->staging.channel = csa->channel;
IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
le16_to_cpu(csa->channel));
iwl_chswitch_done(priv, true);
} else {
IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
le16_to_cpu(csa->channel));
iwl_chswitch_done(priv, false);
}
}
}
EXPORT_SYMBOL(iwl_rx_csa);
#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_print_rx_config_cmd(struct iwl_priv *priv,
struct iwl_rxon_context *ctx)
{
struct iwl_rxon_cmd *rxon = &ctx->staging;
IWL_DEBUG_RADIO(priv, "RX CONFIG:\n");
iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon));
IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel));
IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags));
IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n",
le32_to_cpu(rxon->filter_flags));
IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type);
IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n",
rxon->ofdm_basic_rates);
IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates);
IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr);
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
EXPORT_SYMBOL(iwl_print_rx_config_cmd);
#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
*/
void iwl_irq_handle_error(struct iwl_priv *priv)
{
/* Set the FW error flag -- cleared on iwl_down */
set_bit(STATUS_FW_ERROR, &priv->status);
/* Cancel currently queued command. */
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_ERR(priv, "Loaded firmware version: %s\n",
priv->hw->wiphy->fw_version);
priv->cfg->ops->lib->dump_nic_error_log(priv);
if (priv->cfg->ops->lib->dump_csr)
priv->cfg->ops->lib->dump_csr(priv);
if (priv->cfg->ops->lib->dump_fh)
priv->cfg->ops->lib->dump_fh(priv, NULL, false);
priv->cfg->ops->lib->dump_nic_event_log(priv, false, NULL, false);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
iwl_print_rx_config_cmd(priv,
&priv->contexts[IWL_RXON_CTX_BSS]);
#endif
wake_up_interruptible(&priv->wait_command_queue);
/* Keep the restart process from trying to send host
* commands by clearing the INIT status bit */
clear_bit(STATUS_READY, &priv->status);
if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) {
IWL_DEBUG(priv, IWL_DL_FW_ERRORS,
"Restarting adapter due to uCode error.\n");
if (priv->cfg->mod_params->restart_fw)
queue_work(priv->workqueue, &priv->restart);
}
}
EXPORT_SYMBOL(iwl_irq_handle_error);
static int iwl_apm_stop_master(struct iwl_priv *priv)
{
int ret = 0;
/* stop device's busmaster DMA activity */
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
if (ret)
IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n");
IWL_DEBUG_INFO(priv, "stop master\n");
return ret;
}
void iwl_apm_stop(struct iwl_priv *priv)
{
IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
/* Stop device's DMA activity */
iwl_apm_stop_master(priv);
/* Reset the entire device */
iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
udelay(10);
/*
* Clear "initialization complete" bit to move adapter from
* D0A* (powered-up Active) --> D0U* (Uninitialized) state.
*/
iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
}
EXPORT_SYMBOL(iwl_apm_stop);
/*
* Start up NIC's basic functionality after it has been reset
* (e.g. after platform boot, or shutdown via iwl_apm_stop())
* NOTE: This does not load uCode nor start the embedded processor
*/
int iwl_apm_init(struct iwl_priv *priv)
{
int ret = 0;
u16 lctl;
IWL_DEBUG_INFO(priv, "Init card's basic functions\n");
/*
* Use "set_bit" below rather than "write", to preserve any hardware
* bits already set by default after reset.
*/
/* Disable L0S exit timer (platform NMI Work/Around) */
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
/*
* Disable L0s without affecting L1;
* don't wait for ICH L0s (ICH bug W/A)
*/
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
/* Set FH wait threshold to maximum (HW error during stress W/A) */
iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
/*
* Enable HAP INTA (interrupt from management bus) to
* wake device's PCI Express link L1a -> L0s
* NOTE: This is no-op for 3945 (non-existant bit)
*/
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
/*
* HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
* Check if BIOS (or OS) enabled L1-ASPM on this device.
* If so (likely), disable L0S, so device moves directly L0->L1;
* costs negligible amount of power savings.
* If not (unlikely), enable L0S, so there is at least some
* power savings, even without L1.
*/
if (priv->cfg->set_l0s) {
lctl = iwl_pcie_link_ctl(priv);
if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
PCI_CFG_LINK_CTRL_VAL_L1_EN) {
/* L1-ASPM enabled; disable(!) L0S */
iwl_set_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
} else {
/* L1-ASPM disabled; enable(!) L0S */
iwl_clear_bit(priv, CSR_GIO_REG,
CSR_GIO_REG_VAL_L0S_ENABLED);
IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
}
}
/* Configure analog phase-lock-loop before activating to D0A */
if (priv->cfg->pll_cfg_val)
iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val);
/*
* Set "initialization complete" bit to move adapter from
* D0U* --> D0A* (powered-up active) state.
*/
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
/*
* Wait for clock stabilization; once stabilized, access to
* device-internal resources is supported, e.g. iwl_write_prph()
* and accesses to uCode SRAM.
*/
ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
if (ret < 0) {
IWL_DEBUG_INFO(priv, "Failed to init the card\n");
goto out;
}
/*
* Enable DMA and BSM (if used) clocks, wait for them to stabilize.
* BSM (Boostrap State Machine) is only in 3945 and 4965;
* later devices (i.e. 5000 and later) have non-volatile SRAM,
* and don't need BSM to restore data after power-saving sleep.
*
* Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
* do not disable clocks. This preserves any hardware bits already
* set by default in "CLK_CTRL_REG" after reset.
*/
if (priv->cfg->use_bsm)
iwl_write_prph(priv, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
else
iwl_write_prph(priv, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
udelay(20);
/* Disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
out:
return ret;
}
EXPORT_SYMBOL(iwl_apm_init);
int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
{
int ret = 0;
s8 prev_tx_power = priv->tx_power_user_lmt;
if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) {
IWL_WARN(priv,
"Requested user TXPOWER %d below lower limit %d.\n",
tx_power,
IWLAGN_TX_POWER_TARGET_POWER_MIN);
return -EINVAL;
}
if (tx_power > priv->tx_power_device_lmt) {
IWL_WARN(priv,
"Requested user TXPOWER %d above upper limit %d.\n",
tx_power, priv->tx_power_device_lmt);
return -EINVAL;
}
if (priv->tx_power_user_lmt != tx_power)
force = true;
/* if nic is not up don't send command */
if (iwl_is_ready_rf(priv)) {
priv->tx_power_user_lmt = tx_power;
if (force && priv->cfg->ops->lib->send_tx_power)
ret = priv->cfg->ops->lib->send_tx_power(priv);
else if (!priv->cfg->ops->lib->send_tx_power)
ret = -EOPNOTSUPP;
/*
* if fail to set tx_power, restore the orig. tx power
*/
if (ret)
priv->tx_power_user_lmt = prev_tx_power;
}
/*
* Even this is an async host command, the command
* will always report success from uCode
* So once driver can placing the command into the queue
* successfully, driver can use priv->tx_power_user_lmt
* to reflect the current tx power
*/
return ret;
}
EXPORT_SYMBOL(iwl_set_tx_power);
irqreturn_t iwl_isr_legacy(int irq, void *data)
{
struct iwl_priv *priv = data;
u32 inta, inta_mask;
u32 inta_fh;
unsigned long flags;
if (!priv)
return IRQ_NONE;
spin_lock_irqsave(&priv->lock, flags);
/* Disable (but don't clear!) interrupts here to avoid
* back-to-back ISRs and sporadic interrupts from our NIC.
* If we have something to service, the tasklet will re-enable ints.
* If we *don't* have something, we'll re-enable before leaving here. */
inta_mask = iwl_read32(priv, CSR_INT_MASK); /* just for debug */
iwl_write32(priv, CSR_INT_MASK, 0x00000000);
/* Discover which interrupts are active/pending */
inta = iwl_read32(priv, CSR_INT);
inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
/* Ignore interrupt if there's nothing in NIC to service.
* This may be due to IRQ shared with another device,
* or due to sporadic interrupts thrown from our NIC. */
if (!inta && !inta_fh) {
IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
goto none;
}
if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
/* Hardware disappeared. It might have already raised
* an interrupt */
IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
goto unplugged;
}
IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
inta, inta_mask, inta_fh);
inta &= ~CSR_INT_BIT_SCD;
/* iwl_irq_tasklet() will service interrupts and re-enable them */
if (likely(inta || inta_fh))
tasklet_schedule(&priv->irq_tasklet);
unplugged:
spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_HANDLED;
none:
/* re-enable interrupts here since we don't have anything to service. */
/* only Re-enable if diabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
spin_unlock_irqrestore(&priv->lock, flags);
return IRQ_NONE;
}
EXPORT_SYMBOL(iwl_isr_legacy);
void iwl_send_bt_config(struct iwl_priv *priv)
{
struct iwl_bt_cmd bt_cmd = {
.lead_time = BT_LEAD_TIME_DEF,
.max_kill = BT_MAX_KILL_DEF,
.kill_ack_mask = 0,
.kill_cts_mask = 0,
};
if (!bt_coex_active)
bt_cmd.flags = BT_COEX_DISABLE;
else
bt_cmd.flags = BT_COEX_ENABLE;
IWL_DEBUG_INFO(priv, "BT coex %s\n",
(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG,
sizeof(struct iwl_bt_cmd), &bt_cmd))
IWL_ERR(priv, "failed to send BT Coex Config\n");
}
EXPORT_SYMBOL(iwl_send_bt_config);
int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
{
struct iwl_statistics_cmd statistics_cmd = {
.configuration_flags =
clear ? IWL_STATS_CONF_CLEAR_STATS : 0,
};
if (flags & CMD_ASYNC)
return iwl_send_cmd_pdu_async(priv, REPLY_STATISTICS_CMD,
sizeof(struct iwl_statistics_cmd),
&statistics_cmd, NULL);
else
return iwl_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
sizeof(struct iwl_statistics_cmd),
&statistics_cmd);
}
EXPORT_SYMBOL(iwl_send_statistics_request);
void iwl_rx_pm_sleep_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
#ifdef CONFIG_IWLWIFI_DEBUG
struct iwl_rx_packet *pkt = rxb_addr(rxb);
struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
sleep->pm_sleep_mode, sleep->pm_wakeup_src);
#endif
}
EXPORT_SYMBOL(iwl_rx_pm_sleep_notif);
void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
"notification for %s:\n", len,
get_cmd_string(pkt->hdr.cmd));
iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len);
}
EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif);
void iwl_rx_reply_error(struct iwl_priv *priv,
struct iwl_rx_mem_buffer *rxb)
{
struct iwl_rx_packet *pkt = rxb_addr(rxb);
IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
"seq 0x%04X ser 0x%08X\n",
le32_to_cpu(pkt->u.err_resp.error_type),
get_cmd_string(pkt->u.err_resp.cmd_id),
pkt->u.err_resp.cmd_id,
le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num),
le32_to_cpu(pkt->u.err_resp.error_info));
}
EXPORT_SYMBOL(iwl_rx_reply_error);
void iwl_clear_isr_stats(struct iwl_priv *priv)
{
memset(&priv->isr_stats, 0, sizeof(priv->isr_stats));
}
int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx;
unsigned long flags;
int q;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
return -EIO;
}
if (queue >= AC_NUM) {
IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue);
return 0;
}
q = AC_NUM - 1 - queue;
spin_lock_irqsave(&priv->lock, flags);
/*
* MULTI-FIXME
* This may need to be done per interface in nl80211/cfg80211/mac80211.
*/
for_each_context(priv, ctx) {
ctx->qos_data.def_qos_parm.ac[q].cw_min =
cpu_to_le16(params->cw_min);
ctx->qos_data.def_qos_parm.ac[q].cw_max =
cpu_to_le16(params->cw_max);
ctx->qos_data.def_qos_parm.ac[q].aifsn = params->aifs;
ctx->qos_data.def_qos_parm.ac[q].edca_txop =
cpu_to_le16((params->txop * 32));
ctx->qos_data.def_qos_parm.ac[q].reserved1 = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
EXPORT_SYMBOL(iwl_mac_conf_tx);
int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
return priv->ibss_manager == IWL_IBSS_MANAGER;
}
EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
static void iwl_ht_conf(struct iwl_priv *priv,
struct ieee80211_vif *vif)
{
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
struct ieee80211_sta *sta;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
IWL_DEBUG_MAC80211(priv, "enter:\n");
if (!ctx->ht.enabled)
return;
ctx->ht.protection =
bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
ctx->ht.non_gf_sta_present =
!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
ht_conf->single_chain_sufficient = false;
switch (vif->type) {
case NL80211_IFTYPE_STATION:
rcu_read_lock();
sta = ieee80211_find_sta(vif, bss_conf->bssid);
if (sta) {
struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
int maxstreams;
maxstreams = (ht_cap->mcs.tx_params &
IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
maxstreams += 1;
if ((ht_cap->mcs.rx_mask[1] == 0) &&
(ht_cap->mcs.rx_mask[2] == 0))
ht_conf->single_chain_sufficient = true;
if (maxstreams <= 1)
ht_conf->single_chain_sufficient = true;
} else {
/*
* If at all, this can only happen through a race
* when the AP disconnects us while we're still
* setting up the connection, in that case mac80211
* will soon tell us about that.
*/
ht_conf->single_chain_sufficient = true;
}
rcu_read_unlock();
break;
case NL80211_IFTYPE_ADHOC:
ht_conf->single_chain_sufficient = true;
break;
default:
break;
}
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static inline void iwl_set_no_assoc(struct iwl_priv *priv,
struct ieee80211_vif *vif)
{
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
iwl_led_disassociate(priv);
/*
* inform the ucode that there is no longer an
* association and that no more packets should be
* sent
*/
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
ctx->staging.assoc_id = 0;
iwlcore_commit_rxon(priv, ctx);
}
static int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
unsigned long flags;
__le64 timestamp;
IWL_DEBUG_MAC80211(priv, "enter\n");
lockdep_assert_held(&priv->mutex);
if (!priv->beacon_ctx) {
IWL_ERR(priv, "update beacon but no beacon context!\n");
dev_kfree_skb(skb);
return -EINVAL;
}
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
return -EIO;
}
spin_lock_irqsave(&priv->lock, flags);
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = skb;
timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
priv->timestamp = le64_to_cpu(timestamp);
IWL_DEBUG_MAC80211(priv, "leave\n");
spin_unlock_irqrestore(&priv->lock, flags);
priv->cfg->ops->lib->post_associate(priv, priv->beacon_ctx->vif);
return 0;
}
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changes)
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
int ret;
IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
if (!iwl_is_alive(priv))
return;
mutex_lock(&priv->mutex);
if (changes & BSS_CHANGED_QOS) {
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
ctx->qos_data.qos_active = bss_conf->qos;
iwl_update_qos(priv, ctx);
spin_unlock_irqrestore(&priv->lock, flags);
}
if (changes & BSS_CHANGED_BEACON_ENABLED) {
/*
* the add_interface code must make sure we only ever
* have a single interface that could be beaconing at
* any time.
*/
if (vif->bss_conf.enable_beacon)
priv->beacon_ctx = ctx;
else
priv->beacon_ctx = NULL;
}
if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = ieee80211_beacon_get(hw, vif);
}
if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
iwl_send_rxon_timing(priv, ctx);
if (changes & BSS_CHANGED_BSSID) {
IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
/*
* If there is currently a HW scan going on in the
* background then we need to cancel it else the RXON
* below/in post_associate will fail.
*/
if (iwl_scan_cancel_timeout(priv, 100)) {
IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
mutex_unlock(&priv->mutex);
return;
}
/* mac80211 only sets assoc when in STATION mode */
if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
memcpy(ctx->staging.bssid_addr,
bss_conf->bssid, ETH_ALEN);
/* currently needed in a few places */
memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
} else {
ctx->staging.filter_flags &=
~RXON_FILTER_ASSOC_MSK;
}
}
/*
* This needs to be after setting the BSSID in case
* mac80211 decides to do both changes at once because
* it will invoke post_associate.
*/
if (vif->type == NL80211_IFTYPE_ADHOC &&
changes & BSS_CHANGED_BEACON) {
struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
if (beacon)
iwl_mac_beacon_update(hw, beacon);
}
if (changes & BSS_CHANGED_ERP_PREAMBLE) {
IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
bss_conf->use_short_preamble);
if (bss_conf->use_short_preamble)
ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
else
ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
}
if (changes & BSS_CHANGED_ERP_CTS_PROT) {
IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
else
ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
if (bss_conf->use_cts_prot)
ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
else
ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
}
if (changes & BSS_CHANGED_BASIC_RATES) {
/* XXX use this information
*
* To do that, remove code from iwl_set_rate() and put something
* like this here:
*
if (A-band)
ctx->staging.ofdm_basic_rates =
bss_conf->basic_rates;
else
ctx->staging.ofdm_basic_rates =
bss_conf->basic_rates >> 4;
ctx->staging.cck_basic_rates =
bss_conf->basic_rates & 0xF;
*/
}
if (changes & BSS_CHANGED_HT) {
iwl_ht_conf(priv, vif);
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
if (changes & BSS_CHANGED_ASSOC) {
IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
if (bss_conf->assoc) {
priv->timestamp = bss_conf->timestamp;
iwl_led_associate(priv);
if (!iwl_is_rfkill(priv))
priv->cfg->ops->lib->post_associate(priv, vif);
} else
iwl_set_no_assoc(priv, vif);
}
if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
changes);
ret = iwl_send_rxon_assoc(priv, ctx);
if (!ret) {
/* Sync active_rxon with latest change. */
memcpy((void *)&ctx->active,
&ctx->staging,
sizeof(struct iwl_rxon_cmd));
}
}
if (changes & BSS_CHANGED_BEACON_ENABLED) {
if (vif->bss_conf.enable_beacon) {
memcpy(ctx->staging.bssid_addr,
bss_conf->bssid, ETH_ALEN);
memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
iwlcore_config_ap(priv, vif);
} else
iwl_set_no_assoc(priv, vif);
}
if (changes & BSS_CHANGED_IBSS) {
ret = priv->cfg->ops->lib->manage_ibss_station(priv, vif,
bss_conf->ibss_joined);
if (ret)
IWL_ERR(priv, "failed to %s IBSS station %pM\n",
bss_conf->ibss_joined ? "add" : "remove",
bss_conf->bssid);
}
if (changes & BSS_CHANGED_IDLE &&
priv->cfg->ops->hcmd->set_pan_params) {
if (priv->cfg->ops->hcmd->set_pan_params(priv))
IWL_ERR(priv, "failed to update PAN params\n");
}
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_bss_info_changed);
static int iwl_set_mode(struct iwl_priv *priv, struct ieee80211_vif *vif)
{
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
iwl_connection_init_rx_config(priv, ctx);
if (priv->cfg->ops->hcmd->set_rxon_chain)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
return iwlcore_commit_rxon(priv, ctx);
}
int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *tmp, *ctx = NULL;
int err = 0;
IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
vif->type, vif->addr);
mutex_lock(&priv->mutex);
if (WARN_ON(!iwl_is_ready_rf(priv))) {
err = -EINVAL;
goto out;
}
for_each_context(priv, tmp) {
u32 possible_modes =
tmp->interface_modes | tmp->exclusive_interface_modes;
if (tmp->vif) {
/* check if this busy context is exclusive */
if (tmp->exclusive_interface_modes &
BIT(tmp->vif->type)) {
err = -EINVAL;
goto out;
}
continue;
}
if (!(possible_modes & BIT(vif->type)))
continue;
/* have maybe usable context w/o interface */
ctx = tmp;
break;
}
if (!ctx) {
err = -EOPNOTSUPP;
goto out;
}
vif_priv->ctx = ctx;
ctx->vif = vif;
/*
* This variable will be correct only when there's just
* a single context, but all code using it is for hardware
* that supports only one context.
*/
priv->iw_mode = vif->type;
ctx->is_active = true;
err = iwl_set_mode(priv, vif);
if (err) {
if (!ctx->always_active)
ctx->is_active = false;
goto out_err;
}
if (priv->cfg->advanced_bt_coexist &&
vif->type == NL80211_IFTYPE_ADHOC) {
/*
* pretend to have high BT traffic as long as we
* are operating in IBSS mode, as this will cause
* the rate scaling etc. to behave as intended.
*/
priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
}
goto out;
out_err:
ctx->vif = NULL;
priv->iw_mode = NL80211_IFTYPE_STATION;
out:
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return err;
}
EXPORT_SYMBOL(iwl_mac_add_interface);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
bool scan_completed = false;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->mutex);
WARN_ON(ctx->vif != vif);
ctx->vif = NULL;
iwl_scan_cancel_timeout(priv, 100);
iwl_set_mode(priv, vif);
if (!ctx->always_active)
ctx->is_active = false;
if (priv->scan_vif == vif) {
scan_completed = true;
priv->scan_vif = NULL;
priv->scan_request = NULL;
}
/*
* When removing the IBSS interface, overwrite the
* BT traffic load with the stored one from the last
* notification, if any. If this is a device that
* doesn't implement this, this has no effect since
* both values are the same and zero.
*/
if (vif->type == NL80211_IFTYPE_ADHOC)
priv->bt_traffic_load = priv->notif_bt_traffic_load;
memset(priv->bssid, 0, ETH_ALEN);
mutex_unlock(&priv->mutex);
if (scan_completed)
ieee80211_scan_completed(priv->hw, true);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_mac_remove_interface);
/**
* iwl_mac_config - mac80211 config callback
*/
int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
{
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = conf->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
struct iwl_rxon_context *ctx;
unsigned long flags = 0;
int ret = 0;
u16 ch;
int scan_active = 0;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
channel->hw_value, changed);
if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
test_bit(STATUS_SCANNING, &priv->status))) {
scan_active = 1;
IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
}
if (changed & (IEEE80211_CONF_CHANGE_SMPS |
IEEE80211_CONF_CHANGE_CHANNEL)) {
/* mac80211 uses static for non-HT which is what we want */
priv->current_ht_config.smps = conf->smps_mode;
/*
* Recalculate chain counts.
*
* If monitor mode is enabled then mac80211 will
* set up the SM PS mode to OFF if an HT channel is
* configured.
*/
if (priv->cfg->ops->hcmd->set_rxon_chain)
for_each_context(priv, ctx)
priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
}
/* during scanning mac80211 will delay channel setting until
* scan finish with changed = 0
*/
if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
if (scan_active)
goto set_ch_out;
ch = channel->hw_value;
ch_info = iwl_get_channel_info(priv, channel->band, ch);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
ret = -EINVAL;
goto set_ch_out;
}
spin_lock_irqsave(&priv->lock, flags);
for_each_context(priv, ctx) {
/* Configure HT40 channels */
ctx->ht.enabled = conf_is_ht(conf);
if (ctx->ht.enabled) {
if (conf_is_ht40_minus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_BELOW;
ctx->ht.is_40mhz = true;
} else if (conf_is_ht40_plus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
ctx->ht.is_40mhz = true;
} else {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_NONE;
ctx->ht.is_40mhz = false;
}
} else
ctx->ht.is_40mhz = false;
/*
* Default to no protection. Protection mode will
* later be set from BSS config in iwl_ht_conf
*/
ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
/* if we are switching from ht to 2.4 clear flags
* from any ht related info since 2.4 does not
* support ht */
if ((le16_to_cpu(ctx->staging.channel) != ch))
ctx->staging.flags = 0;
iwl_set_rxon_channel(priv, channel, ctx);
iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, ctx, channel->band,
ctx->vif);
}
spin_unlock_irqrestore(&priv->lock, flags);
if (priv->cfg->ops->lib->update_bcast_stations)
ret = priv->cfg->ops->lib->update_bcast_stations(priv);
set_ch_out:
/* The list of supported rates and rate mask can be different
* for each band; since the band may have changed, reset
* the rate mask to what mac80211 lists */
iwl_set_rate(priv);
}
if (changed & (IEEE80211_CONF_CHANGE_PS |
IEEE80211_CONF_CHANGE_IDLE)) {
ret = iwl_power_update_mode(priv, false);
if (ret)
IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
}
if (changed & IEEE80211_CONF_CHANGE_POWER) {
IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
priv->tx_power_user_lmt, conf->power_level);
iwl_set_tx_power(priv, conf->power_level, false);
}
if (!iwl_is_ready(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
goto out;
}
if (scan_active)
goto out;
for_each_context(priv, ctx) {
if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
iwlcore_commit_rxon(priv, ctx);
else
IWL_DEBUG_INFO(priv,
"Not re-sending same RXON configuration.\n");
}
out:
IWL_DEBUG_MAC80211(priv, "leave\n");
mutex_unlock(&priv->mutex);
return ret;
}
EXPORT_SYMBOL(iwl_mac_config);
void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
unsigned long flags;
/* IBSS can only be the IWL_RXON_CTX_BSS context */
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
spin_lock_irqsave(&priv->lock, flags);
memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
spin_unlock_irqrestore(&priv->lock, flags);
spin_lock_irqsave(&priv->lock, flags);
/* new association get rid of ibss beacon skb */
if (priv->ibss_beacon)
dev_kfree_skb(priv->ibss_beacon);
priv->ibss_beacon = NULL;
priv->timestamp = 0;
spin_unlock_irqrestore(&priv->lock, flags);
if (!iwl_is_ready_rf(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
mutex_unlock(&priv->mutex);
return;
}
/* we are restarting association process
* clear RXON_FILTER_ASSOC_MSK bit
*/
iwl_scan_cancel_timeout(priv, 100);
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
iwlcore_commit_rxon(priv, ctx);
iwl_set_rate(priv);
mutex_unlock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
EXPORT_SYMBOL(iwl_mac_reset_tsf);
int iwl_alloc_txq_mem(struct iwl_priv *priv)
{
if (!priv->txq)
priv->txq = kzalloc(
sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
GFP_KERNEL);
if (!priv->txq) {
IWL_ERR(priv, "Not enough memory for txq\n");
return -ENOMEM;
}
return 0;
}
EXPORT_SYMBOL(iwl_alloc_txq_mem);
void iwl_free_txq_mem(struct iwl_priv *priv)
{
kfree(priv->txq);
priv->txq = NULL;
}
EXPORT_SYMBOL(iwl_free_txq_mem);
#ifdef CONFIG_IWLWIFI_DEBUGFS
#define IWL_TRAFFIC_DUMP_SIZE (IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
void iwl_reset_traffic_log(struct iwl_priv *priv)
{
priv->tx_traffic_idx = 0;
priv->rx_traffic_idx = 0;
if (priv->tx_traffic)
memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE);
if (priv->rx_traffic)
memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE);
}
int iwl_alloc_traffic_mem(struct iwl_priv *priv)
{
u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE;
if (iwl_debug_level & IWL_DL_TX) {
if (!priv->tx_traffic) {
priv->tx_traffic =
kzalloc(traffic_size, GFP_KERNEL);
if (!priv->tx_traffic)
return -ENOMEM;
}
}
if (iwl_debug_level & IWL_DL_RX) {
if (!priv->rx_traffic) {
priv->rx_traffic =
kzalloc(traffic_size, GFP_KERNEL);
if (!priv->rx_traffic)
return -ENOMEM;
}
}
iwl_reset_traffic_log(priv);
return 0;
}
EXPORT_SYMBOL(iwl_alloc_traffic_mem);
void iwl_free_traffic_mem(struct iwl_priv *priv)
{
kfree(priv->tx_traffic);
priv->tx_traffic = NULL;
kfree(priv->rx_traffic);
priv->rx_traffic = NULL;
}
EXPORT_SYMBOL(iwl_free_traffic_mem);
void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
{
__le16 fc;
u16 len;
if (likely(!(iwl_debug_level & IWL_DL_TX)))
return;
if (!priv->tx_traffic)
return;
fc = header->frame_control;
if (ieee80211_is_data(fc)) {
len = (length > IWL_TRAFFIC_ENTRY_SIZE)
? IWL_TRAFFIC_ENTRY_SIZE : length;
memcpy((priv->tx_traffic +
(priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)),
header, len);
priv->tx_traffic_idx =
(priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame);
void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
u16 length, struct ieee80211_hdr *header)
{
__le16 fc;
u16 len;
if (likely(!(iwl_debug_level & IWL_DL_RX)))
return;
if (!priv->rx_traffic)
return;
fc = header->frame_control;
if (ieee80211_is_data(fc)) {
len = (length > IWL_TRAFFIC_ENTRY_SIZE)
? IWL_TRAFFIC_ENTRY_SIZE : length;
memcpy((priv->rx_traffic +
(priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)),
header, len);
priv->rx_traffic_idx =
(priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES;
}
}
EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame);
const char *get_mgmt_string(int cmd)
{
switch (cmd) {
IWL_CMD(MANAGEMENT_ASSOC_REQ);
IWL_CMD(MANAGEMENT_ASSOC_RESP);
IWL_CMD(MANAGEMENT_REASSOC_REQ);
IWL_CMD(MANAGEMENT_REASSOC_RESP);
IWL_CMD(MANAGEMENT_PROBE_REQ);
IWL_CMD(MANAGEMENT_PROBE_RESP);
IWL_CMD(MANAGEMENT_BEACON);
IWL_CMD(MANAGEMENT_ATIM);
IWL_CMD(MANAGEMENT_DISASSOC);
IWL_CMD(MANAGEMENT_AUTH);
IWL_CMD(MANAGEMENT_DEAUTH);
IWL_CMD(MANAGEMENT_ACTION);
default:
return "UNKNOWN";
}
}
const char *get_ctrl_string(int cmd)
{
switch (cmd) {
IWL_CMD(CONTROL_BACK_REQ);
IWL_CMD(CONTROL_BACK);
IWL_CMD(CONTROL_PSPOLL);
IWL_CMD(CONTROL_RTS);
IWL_CMD(CONTROL_CTS);
IWL_CMD(CONTROL_ACK);
IWL_CMD(CONTROL_CFEND);
IWL_CMD(CONTROL_CFENDACK);
default:
return "UNKNOWN";
}
}
void iwl_clear_traffic_stats(struct iwl_priv *priv)
{
memset(&priv->tx_stats, 0, sizeof(struct traffic_stats));
memset(&priv->rx_stats, 0, sizeof(struct traffic_stats));
priv->led_tpt = 0;
}
/*
* if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will
* record all the MGMT, CTRL and DATA pkt for both TX and Rx pass.
* Use debugFs to display the rx/rx_statistics
* if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL
* information will be recorded, but DATA pkt still will be recorded
* for the reason of iwl_led.c need to control the led blinking based on
* number of tx and rx data.
*
*/
void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len)
{
struct traffic_stats *stats;
if (is_tx)
stats = &priv->tx_stats;
else
stats = &priv->rx_stats;
if (ieee80211_is_mgmt(fc)) {
switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
stats->mgmt[MANAGEMENT_ASSOC_REQ]++;
break;
case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP):
stats->mgmt[MANAGEMENT_ASSOC_RESP]++;
break;
case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
stats->mgmt[MANAGEMENT_REASSOC_REQ]++;
break;
case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP):
stats->mgmt[MANAGEMENT_REASSOC_RESP]++;
break;
case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ):
stats->mgmt[MANAGEMENT_PROBE_REQ]++;
break;
case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP):
stats->mgmt[MANAGEMENT_PROBE_RESP]++;
break;
case cpu_to_le16(IEEE80211_STYPE_BEACON):
stats->mgmt[MANAGEMENT_BEACON]++;
break;
case cpu_to_le16(IEEE80211_STYPE_ATIM):
stats->mgmt[MANAGEMENT_ATIM]++;
break;
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
stats->mgmt[MANAGEMENT_DISASSOC]++;
break;
case cpu_to_le16(IEEE80211_STYPE_AUTH):
stats->mgmt[MANAGEMENT_AUTH]++;
break;
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
stats->mgmt[MANAGEMENT_DEAUTH]++;
break;
case cpu_to_le16(IEEE80211_STYPE_ACTION):
stats->mgmt[MANAGEMENT_ACTION]++;
break;
}
} else if (ieee80211_is_ctl(fc)) {
switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
case cpu_to_le16(IEEE80211_STYPE_BACK_REQ):
stats->ctrl[CONTROL_BACK_REQ]++;
break;
case cpu_to_le16(IEEE80211_STYPE_BACK):
stats->ctrl[CONTROL_BACK]++;
break;
case cpu_to_le16(IEEE80211_STYPE_PSPOLL):
stats->ctrl[CONTROL_PSPOLL]++;
break;
case cpu_to_le16(IEEE80211_STYPE_RTS):
stats->ctrl[CONTROL_RTS]++;
break;
case cpu_to_le16(IEEE80211_STYPE_CTS):
stats->ctrl[CONTROL_CTS]++;
break;
case cpu_to_le16(IEEE80211_STYPE_ACK):
stats->ctrl[CONTROL_ACK]++;
break;
case cpu_to_le16(IEEE80211_STYPE_CFEND):
stats->ctrl[CONTROL_CFEND]++;
break;
case cpu_to_le16(IEEE80211_STYPE_CFENDACK):
stats->ctrl[CONTROL_CFENDACK]++;
break;
}
} else {
/* data */
stats->data_cnt++;
stats->data_bytes += len;
}
iwl_leds_background(priv);
}
EXPORT_SYMBOL(iwl_update_stats);
#endif
static const char *get_csr_string(int cmd)
{
switch (cmd) {
IWL_CMD(CSR_HW_IF_CONFIG_REG);
IWL_CMD(CSR_INT_COALESCING);
IWL_CMD(CSR_INT);
IWL_CMD(CSR_INT_MASK);
IWL_CMD(CSR_FH_INT_STATUS);
IWL_CMD(CSR_GPIO_IN);
IWL_CMD(CSR_RESET);
IWL_CMD(CSR_GP_CNTRL);
IWL_CMD(CSR_HW_REV);
IWL_CMD(CSR_EEPROM_REG);
IWL_CMD(CSR_EEPROM_GP);
IWL_CMD(CSR_OTP_GP_REG);
IWL_CMD(CSR_GIO_REG);
IWL_CMD(CSR_GP_UCODE_REG);
IWL_CMD(CSR_GP_DRIVER_REG);
IWL_CMD(CSR_UCODE_DRV_GP1);
IWL_CMD(CSR_UCODE_DRV_GP2);
IWL_CMD(CSR_LED_REG);
IWL_CMD(CSR_DRAM_INT_TBL_REG);
IWL_CMD(CSR_GIO_CHICKEN_BITS);
IWL_CMD(CSR_ANA_PLL_CFG);
IWL_CMD(CSR_HW_REV_WA_REG);
IWL_CMD(CSR_DBG_HPET_MEM_REG);
default:
return "UNKNOWN";
}
}
void iwl_dump_csr(struct iwl_priv *priv)
{
int i;
u32 csr_tbl[] = {
CSR_HW_IF_CONFIG_REG,
CSR_INT_COALESCING,
CSR_INT,
CSR_INT_MASK,
CSR_FH_INT_STATUS,
CSR_GPIO_IN,
CSR_RESET,
CSR_GP_CNTRL,
CSR_HW_REV,
CSR_EEPROM_REG,
CSR_EEPROM_GP,
CSR_OTP_GP_REG,
CSR_GIO_REG,
CSR_GP_UCODE_REG,
CSR_GP_DRIVER_REG,
CSR_UCODE_DRV_GP1,
CSR_UCODE_DRV_GP2,
CSR_LED_REG,
CSR_DRAM_INT_TBL_REG,
CSR_GIO_CHICKEN_BITS,
CSR_ANA_PLL_CFG,
CSR_HW_REV_WA_REG,
CSR_DBG_HPET_MEM_REG
};
IWL_ERR(priv, "CSR values:\n");
IWL_ERR(priv, "(2nd byte of CSR_INT_COALESCING is "
"CSR_INT_PERIODIC_REG)\n");
for (i = 0; i < ARRAY_SIZE(csr_tbl); i++) {
IWL_ERR(priv, " %25s: 0X%08x\n",
get_csr_string(csr_tbl[i]),
iwl_read32(priv, csr_tbl[i]));
}
}
EXPORT_SYMBOL(iwl_dump_csr);
static const char *get_fh_string(int cmd)
{
switch (cmd) {
IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
IWL_CMD(FH_RSCSR_CHNL0_WPTR);
IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
IWL_CMD(FH_TSSR_TX_STATUS_REG);
IWL_CMD(FH_TSSR_TX_ERROR_REG);
default:
return "UNKNOWN";
}
}
int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
{
int i;
#ifdef CONFIG_IWLWIFI_DEBUG
int pos = 0;
size_t bufsz = 0;
#endif
u32 fh_tbl[] = {
FH_RSCSR_CHNL0_STTS_WPTR_REG,
FH_RSCSR_CHNL0_RBDCB_BASE_REG,
FH_RSCSR_CHNL0_WPTR,
FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_MEM_RSSR_SHARED_CTRL_REG,
FH_MEM_RSSR_RX_STATUS_REG,
FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
FH_TSSR_TX_STATUS_REG,
FH_TSSR_TX_ERROR_REG
};
#ifdef CONFIG_IWLWIFI_DEBUG
if (display) {
bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
*buf = kmalloc(bufsz, GFP_KERNEL);
if (!*buf)
return -ENOMEM;
pos += scnprintf(*buf + pos, bufsz - pos,
"FH register values:\n");
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
pos += scnprintf(*buf + pos, bufsz - pos,
" %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(priv, fh_tbl[i]));
}
return pos;
}
#endif
IWL_ERR(priv, "FH register values:\n");
for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
IWL_ERR(priv, " %34s: 0X%08x\n",
get_fh_string(fh_tbl[i]),
iwl_read_direct32(priv, fh_tbl[i]));
}
return 0;
}
EXPORT_SYMBOL(iwl_dump_fh);
static void iwl_force_rf_reset(struct iwl_priv *priv)
{
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (!iwl_is_any_associated(priv)) {
IWL_DEBUG_SCAN(priv, "force reset rejected: not associated\n");
return;
}
/*
* There is no easy and better way to force reset the radio,
* the only known method is switching channel which will force to
* reset and tune the radio.
* Use internal short scan (single channel) operation to should
* achieve this objective.
* Driver should reset the radio when number of consecutive missed
* beacon, or any other uCode error condition detected.
*/
IWL_DEBUG_INFO(priv, "perform radio reset.\n");
iwl_internal_short_hw_scan(priv);
}
int iwl_force_reset(struct iwl_priv *priv, int mode, bool external)
{
struct iwl_force_reset *force_reset;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return -EINVAL;
if (mode >= IWL_MAX_FORCE_RESET) {
IWL_DEBUG_INFO(priv, "invalid reset request.\n");
return -EINVAL;
}
force_reset = &priv->force_reset[mode];
force_reset->reset_request_count++;
if (!external) {
if (force_reset->last_force_reset_jiffies &&
time_after(force_reset->last_force_reset_jiffies +
force_reset->reset_duration, jiffies)) {
IWL_DEBUG_INFO(priv, "force reset rejected\n");
force_reset->reset_reject_count++;
return -EAGAIN;
}
}
force_reset->reset_success_count++;
force_reset->last_force_reset_jiffies = jiffies;
IWL_DEBUG_INFO(priv, "perform force reset (%d)\n", mode);
switch (mode) {
case IWL_RF_RESET:
iwl_force_rf_reset(priv);
break;
case IWL_FW_RESET:
/*
* if the request is from external(ex: debugfs),
* then always perform the request in regardless the module
* parameter setting
* if the request is from internal (uCode error or driver
* detect failure), then fw_restart module parameter
* need to be check before performing firmware reload
*/
if (!external && !priv->cfg->mod_params->restart_fw) {
IWL_DEBUG_INFO(priv, "Cancel firmware reload based on "
"module parameter setting\n");
break;
}
IWL_ERR(priv, "On demand firmware reload\n");
/* Set the FW error flag -- cleared on iwl_down */
set_bit(STATUS_FW_ERROR, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
/*
* Keep the restart process from trying to send host
* commands by clearing the INIT status bit
*/
clear_bit(STATUS_READY, &priv->status);
queue_work(priv->workqueue, &priv->restart);
break;
}
return 0;
}
EXPORT_SYMBOL(iwl_force_reset);
/**
* iwl_bg_monitor_recover - Timer callback to check for stuck queue and recover
*
* During normal condition (no queue is stuck), the timer is continually set to
* execute every monitor_recover_period milliseconds after the last timer
* expired. When the queue read_ptr is at the same place, the timer is
* shorten to 100mSecs. This is
* 1) to reduce the chance that the read_ptr may wrap around (not stuck)
* 2) to detect the stuck queues quicker before the station and AP can
* disassociate each other.
*
* This function monitors all the tx queues and recover from it if any
* of the queues are stuck.
* 1. It first check the cmd queue for stuck conditions. If it is stuck,
* it will recover by resetting the firmware and return.
* 2. Then, it checks for station association. If it associates it will check
* other queues. If any queue is stuck, it will recover by resetting
* the firmware.
* Note: It the number of times the queue read_ptr to be at the same place to
* be MAX_REPEAT+1 in order to consider to be stuck.
*/
/*
* The maximum number of times the read pointer of the tx queue at the
* same place without considering to be stuck.
*/
#define MAX_REPEAT (2)
static int iwl_check_stuck_queue(struct iwl_priv *priv, int cnt)
{
struct iwl_tx_queue *txq;
struct iwl_queue *q;
txq = &priv->txq[cnt];
q = &txq->q;
/* queue is empty, skip */
if (q->read_ptr != q->write_ptr) {
if (q->read_ptr == q->last_read_ptr) {
/* a queue has not been read from last time */
if (q->repeat_same_read_ptr > MAX_REPEAT) {
IWL_ERR(priv,
"queue %d stuck %d time. Fw reload.\n",
q->id, q->repeat_same_read_ptr);
q->repeat_same_read_ptr = 0;
iwl_force_reset(priv, IWL_FW_RESET, false);
} else {
q->repeat_same_read_ptr++;
IWL_DEBUG_RADIO(priv,
"queue %d, not read %d time\n",
q->id,
q->repeat_same_read_ptr);
if (!priv->cfg->advanced_bt_coexist) {
mod_timer(&priv->monitor_recover,
jiffies + msecs_to_jiffies(
IWL_ONE_HUNDRED_MSECS));
return 1;
}
}
return 0;
} else {
q->last_read_ptr = q->read_ptr;
q->repeat_same_read_ptr = 0;
}
}
return 0;
}
void iwl_bg_monitor_recover(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
int cnt;
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
/* monitor and check for stuck cmd queue */
if (iwl_check_stuck_queue(priv, priv->cmd_queue))
return;
/* monitor and check for other stuck queues */
if (iwl_is_any_associated(priv)) {
for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) {
/* skip as we already checked the command queue */
if (cnt == priv->cmd_queue)
continue;
if (iwl_check_stuck_queue(priv, cnt))
return;
}
}
if (priv->cfg->monitor_recover_period) {
/*
* Reschedule the timer to occur in
* priv->cfg->monitor_recover_period
*/
mod_timer(&priv->monitor_recover, jiffies + msecs_to_jiffies(
priv->cfg->monitor_recover_period));
}
}
EXPORT_SYMBOL(iwl_bg_monitor_recover);
/*
* extended beacon time format
* time in usec will be changed into a 32-bit value in extended:internal format
* the extended part is the beacon counts
* the internal part is the time in usec within one beacon interval
*/
u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval)
{
u32 quot;
u32 rem;
u32 interval = beacon_interval * TIME_UNIT;
if (!interval || !usec)
return 0;
quot = (usec / interval) &
(iwl_beacon_time_mask_high(priv,
priv->hw_params.beacon_time_tsf_bits) >>
priv->hw_params.beacon_time_tsf_bits);
rem = (usec % interval) & iwl_beacon_time_mask_low(priv,
priv->hw_params.beacon_time_tsf_bits);
return (quot << priv->hw_params.beacon_time_tsf_bits) + rem;
}
EXPORT_SYMBOL(iwl_usecs_to_beacons);
/* base is usually what we get from ucode with each received frame,
* the same as HW timer counter counting down
*/
__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
u32 addon, u32 beacon_interval)
{
u32 base_low = base & iwl_beacon_time_mask_low(priv,
priv->hw_params.beacon_time_tsf_bits);
u32 addon_low = addon & iwl_beacon_time_mask_low(priv,
priv->hw_params.beacon_time_tsf_bits);
u32 interval = beacon_interval * TIME_UNIT;
u32 res = (base & iwl_beacon_time_mask_high(priv,
priv->hw_params.beacon_time_tsf_bits)) +
(addon & iwl_beacon_time_mask_high(priv,
priv->hw_params.beacon_time_tsf_bits));
if (base_low > addon_low)
res += base_low - addon_low;
else if (base_low < addon_low) {
res += interval + base_low - addon_low;
res += (1 << priv->hw_params.beacon_time_tsf_bits);
} else
res += (1 << priv->hw_params.beacon_time_tsf_bits);
return cpu_to_le32(res);
}
EXPORT_SYMBOL(iwl_add_beacon_time);
#ifdef CONFIG_PM
int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
/*
* This function is called when system goes into suspend state
* mac80211 will call iwl_mac_stop() from the mac80211 suspend function
* first but since iwl_mac_stop() has no knowledge of who the caller is,
* it will not call apm_ops.stop() to stop the DMA operation.
* Calling apm_ops.stop here to make sure we stop the DMA.
*/
priv->cfg->ops->lib->apm_ops.stop(priv);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
EXPORT_SYMBOL(iwl_pci_suspend);
int iwl_pci_resume(struct pci_dev *pdev)
{
struct iwl_priv *priv = pci_get_drvdata(pdev);
int ret;
bool hw_rfkill = false;
/*
* We disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state.
*/
pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
if (ret)
return ret;
pci_restore_state(pdev);
iwl_enable_interrupts(priv);
if (!(iwl_read32(priv, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
hw_rfkill = true;
if (hw_rfkill)
set_bit(STATUS_RF_KILL_HW, &priv->status);
else
clear_bit(STATUS_RF_KILL_HW, &priv->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rfkill);
return 0;
}
EXPORT_SYMBOL(iwl_pci_resume);
#endif /* CONFIG_PM */