linux/drivers/net/wwan/Kconfig
M Chetan Kumar 035e3befc1 net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.

When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.

Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.

Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-09 14:00:25 +00:00

125 lines
4.1 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
#
# Wireless WAN device configuration
#
menu "Wireless WAN"
config WWAN
tristate "WWAN Driver Core"
help
Say Y here if you want to use the WWAN driver core. This driver
provides a common framework for WWAN drivers.
To compile this driver as a module, choose M here: the module will be
called wwan.
if WWAN
config WWAN_DEBUGFS
bool "WWAN devices debugfs interface" if EXPERT
depends on DEBUG_FS
default y
help
Enables debugfs infrastructure for the WWAN core and device drivers.
If this option is selected, then you can find the debug interface
elements for each WWAN device in a directory that is corresponding to
the device name: debugfs/wwan/wwanX.
config WWAN_HWSIM
tristate "Simulated WWAN device"
help
This driver is a developer testing tool that can be used to test WWAN
framework.
To compile this driver as a module, choose M here: the module will be
called wwan_hwsim. If unsure, say N.
config MHI_WWAN_CTRL
tristate "MHI WWAN control driver for QCOM-based PCIe modems"
depends on MHI_BUS
help
MHI WWAN CTRL allows QCOM-based PCIe modems to expose different modem
control protocols/ports to userspace, including AT, MBIM, QMI, DIAG
and FIREHOSE. These protocols can be accessed directly from userspace
(e.g. AT commands) or via libraries/tools (e.g. libmbim, libqmi,
libqcdm...).
To compile this driver as a module, choose M here: the module will be
called mhi_wwan_ctrl.
config MHI_WWAN_MBIM
tristate "MHI WWAN MBIM network driver for QCOM-based PCIe modems"
depends on MHI_BUS
help
MHI WWAN MBIM is a WWAN network driver for QCOM-based PCIe modems.
It implements MBIM over MHI, for IP data aggregation and muxing.
A default wwan0 network interface is created for MBIM data session
ID 0. Additional links can be created via wwan rtnetlink type.
To compile this driver as a module, choose M here: the module will be
called mhi_wwan_mbim.
config QCOM_BAM_DMUX
tristate "Qualcomm BAM-DMUX WWAN network driver"
depends on (DMA_ENGINE && PM && QCOM_SMEM_STATE) || COMPILE_TEST
help
The BAM Data Multiplexer provides access to the network data channels
of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm
MSM8916 or MSM8974. The connection can be established via QMI/AT from
userspace with control ports available through the WWAN subsystem
(CONFIG_RPMSG_WWAN_CTRL) or QRTR network sockets (CONFIG_QRTR).
To compile this driver as a module, choose M here: the module will be
called qcom_bam_dmux.
config RPMSG_WWAN_CTRL
tristate "RPMSG WWAN control driver"
depends on RPMSG
help
RPMSG WWAN CTRL allows modems available via RPMSG channels to expose
different modem protocols/ports to userspace, including AT and QMI.
These protocols can be accessed directly from userspace
(e.g. AT commands) or via libraries/tools (e.g. libqmi, libqcdm...).
This is mainly used for modems integrated into many Qualcomm SoCs,
e.g. for AT and QMI on Qualcomm MSM8916 or MSM8974. Note that many
newer Qualcomm SoCs (e.g. SDM845) still provide an AT port through
this driver but the QMI messages can only be sent through
QRTR network sockets (CONFIG_QRTR).
To compile this driver as a module, choose M here: the module will be
called rpmsg_wwan_ctrl.
config IOSM
tristate "IOSM Driver for Intel M.2 WWAN Device"
depends on PCI
select NET_DEVLINK
select RELAY if WWAN_DEBUGFS
help
This driver enables Intel M.2 WWAN Device communication.
If you have one of those Intel M.2 WWAN Modules and wish to use it in
Linux say Y/M here.
If unsure, say N.
config MTK_T7XX
tristate "MediaTek PCIe 5G WWAN modem T7xx device"
depends on PCI
help
Enables MediaTek PCIe based 5G WWAN modem (T7xx series) device.
Adapts WWAN framework and provides network interface like wwan0
and tty interfaces like wwan0at0 (AT protocol), wwan0mbim0
(MBIM protocol), etc.
To compile this driver as a module, choose M here: the module will be
called mtk_t7xx.
If unsure, say N.
endif # WWAN
endmenu