linux/arch/m68k/coldfire/stmark2.c
Angelo Dureghello 40cff49289 m68k: stmark2: update board setup
Add configuration for flexcan pads.

Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2021-08-23 08:40:04 +10:00

127 lines
2.8 KiB
C

/*
* stmark2.c -- Support for Sysam AMCORE open board
*
* (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-fsl-dspi.h>
#include <linux/spi/flash.h>
#include <linux/dma-mapping.h>
#include <asm/mcfsim.h>
/*
* Partitioning of parallel NOR flash (39VF3201B)
*/
static struct mtd_partition stmark2_partitions[] = {
{
.name = "U-Boot (1024K)",
.size = 0x100000,
.offset = 0x0
}, {
.name = "Kernel+initramfs (7168K)",
.size = 0x700000,
.offset = MTDPART_OFS_APPEND
}, {
.name = "Flash Free Space (8192K)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND
}
};
static struct flash_platform_data stmark2_spi_flash_data = {
.name = "is25lp128",
.parts = stmark2_partitions,
.nr_parts = ARRAY_SIZE(stmark2_partitions),
.type = "is25lp128",
};
static struct spi_board_info stmark2_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 5000000,
.bus_num = 0,
.chip_select = 1,
.platform_data = &stmark2_spi_flash_data,
.mode = SPI_MODE_3,
}
};
/* SPI controller data, SPI (0) */
static struct fsl_dspi_platform_data dspi_spi0_info = {
.cs_num = 4,
.bus_num = 0,
.sck_cs_delay = 100,
.cs_sck_delay = 100,
};
static struct resource dspi_spi0_resource[] = {
[0] = {
.start = MCFDSPI_BASE0,
.end = MCFDSPI_BASE0 + 0xFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 12,
.end = 13,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = MCF_IRQ_DSPI0,
.end = MCF_IRQ_DSPI0,
.flags = IORESOURCE_IRQ,
},
};
static u64 stmark2_dspi_mask = DMA_BIT_MASK(32);
/* SPI controller, id = bus number */
static struct platform_device dspi_spi0_device = {
.name = "fsl-dspi",
.id = 0,
.num_resources = ARRAY_SIZE(dspi_spi0_resource),
.resource = dspi_spi0_resource,
.dev = {
.platform_data = &dspi_spi0_info,
.dma_mask = &stmark2_dspi_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct platform_device *stmark2_devices[] __initdata = {
&dspi_spi0_device,
};
/*
* Note: proper pin-mux setup is mandatory for proper SPI functionality.
*/
static int __init init_stmark2(void)
{
/* DSPI0, all pins as DSPI, and using CS1 */
__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
/* Board gpio setup */
__raw_writeb(0x00, MCFGPIO_PAR_BE);
__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
__raw_writeb(0x00, MCFGPIO_PAR_CS);
/* CAN pads */
__raw_writeb(0x50, MCFGPIO_PAR_CANI2C);
platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
spi_register_board_info(stmark2_board_info,
ARRAY_SIZE(stmark2_board_info));
return 0;
}
device_initcall(init_stmark2);