linux/arch/m68k/coldfire/m5407.c
Arnd Bergmann 63aadb7766 m68k: coldfire: use clkdev_lookup on most coldfire
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.

Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.

Also leave the four SoCs that have gated clocks.

Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00

66 lines
1.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/***************************************************************************/
/*
* m5407.c -- platform support for ColdFire 5407 based boards
*
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2000, Lineo (www.lineo.com)
*/
/***************************************************************************/
#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
static struct clk_lookup m5407_clk_lookup[] = {
CLKDEV_INIT(NULL, "pll.0", &clk_pll),
CLKDEV_INIT(NULL, "sys.0", &clk_sys),
CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
};
/***************************************************************************/
static void __init m5407_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
MCFSIM_I2CICR);
mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
/* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1);
mcf_mapirq2imr(27, MCFINTC_EINT3);
mcf_mapirq2imr(29, MCFINTC_EINT5);
mcf_mapirq2imr(31, MCFINTC_EINT7);
m5407_i2c_init();
clkdev_add_table(m5407_clk_lookup, ARRAY_SIZE(m5407_clk_lookup));
}
/***************************************************************************/