linux/arch/powerpc/perf/e6500-pmu.c
Priyanka Jain 3c83658ca9 powerpc/perf: Add e6500 PMU driver
e6500 core performance monitors has the following features:
- 6 performance monitor counters
- 512 events supported
- no threshold events

e6500 PMU has more specific events (Data L1 cache misses, Instruction L1
cache misses, etc ) than e500 PMU (which only had Data L1 cache reloads,
etc). Where available, the more specific events have been used which will
produce slightly different results than e500 PMU equivalents.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07 18:38:04 -05:00

122 lines
3.2 KiB
C

/*
* Performance counter support for e6500 family processors.
*
* Author: Priyanka Jain, Priyanka.Jain@freescale.com
* Based on e500-pmu.c
* Copyright 2013 Freescale Semiconductor, Inc.
* Copyright 2008-2009 Paul Mackerras, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/string.h>
#include <linux/perf_event.h>
#include <asm/reg.h>
#include <asm/cputable.h>
/*
* Map of generic hardware event types to hardware events
* Zero if unsupported
*/
static int e6500_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 1,
[PERF_COUNT_HW_INSTRUCTIONS] = 2,
[PERF_COUNT_HW_CACHE_MISSES] = 221,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
[PERF_COUNT_HW_BRANCH_MISSES] = 15,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
static int e6500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
[C(L1D)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 27, 222 },
[C(OP_WRITE)] = { 28, 223 },
[C(OP_PREFETCH)] = { 29, 0 },
},
[C(L1I)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 2, 254 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 37, 0 },
},
/*
* Assuming LL means L2, it's not a good match for this model.
* It does not have separate read/write events (but it does have
* separate instruction/data events).
*/
[C(LL)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { 0, 0 },
[C(OP_PREFETCH)] = { 0, 0 },
},
/*
* There are data/instruction MMU misses, but that's a miss on
* the chip's internal level-one TLB which is probably not
* what the user wants. Instead, unified level-two TLB misses
* are reported here.
*/
[C(DTLB)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 26, 66 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = {
/*RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 12, 15 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(NODE)] = {
/* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
};
static int num_events = 512;
/* Upper half of event id is PMLCb, for threshold events */
static u64 e6500_xlate_event(u64 event_id)
{
u32 event_low = (u32)event_id;
if (event_low >= num_events ||
(event_id & (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)))
return 0;
return FSL_EMB_EVENT_VALID;
}
static struct fsl_emb_pmu e6500_pmu = {
.name = "e6500 family",
.n_counter = 6,
.n_restricted = 0,
.xlate_event = e6500_xlate_event,
.n_generic = ARRAY_SIZE(e6500_generic_events),
.generic_events = e6500_generic_events,
.cache_events = &e6500_cache_events,
};
static int init_e6500_pmu(void)
{
if (!cur_cpu_spec->oprofile_cpu_type ||
strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e6500"))
return -ENODEV;
return register_fsl_emb_pmu(&e6500_pmu);
}
early_initcall(init_e6500_pmu);