linux/Documentation/hwmon/ibmaem
Darrick J. Wong 8070408b54 hwmon: (ibmaem) Automatically load on HC10 blade
Enable auto-probing for the HC10 blade and amend the supported system
list.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-06-15 18:39:46 +02:00

39 lines
1.4 KiB
Plaintext

Kernel driver ibmaem
======================
This driver talks to the IBM Systems Director Active Energy Manager, known
henceforth as AEM.
Supported systems:
* Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HC10/HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Prefix: 'ibmaem'
Datasheet: Not available
Author: Darrick J. Wong
Description
-----------
This driver implements sensor reading support for the energy and power meters
available on various IBM System X hardware through the BMC. All sensor banks
will be exported as platform devices; this driver can talk to both v1 and v2
interfaces. This driver is completely separate from the older ibmpex driver.
The v1 AEM interface has a simple set of features to monitor energy use. There
is a register that displays an estimate of raw energy consumption since the
last BMC reset, and a power sensor that returns average power use over a
configurable interval.
The v2 AEM interface is a bit more sophisticated, being able to present a wider
range of energy and power use registers, the power cap as set by the AEM
software, and temperature sensors.
Special Features
----------------
The "power_cap" value displays the current system power cap, as set by the AEM
software. Setting the power cap from the host is not currently supported.