linux/arch/powerpc/boot/dts/mpc8548cds_36b.dts
Zhao Chenhui a2279e3fe4 powerpc/85xx: mpc8548cds - add 36-bit dts
Create mpc8548cds_36b.dts. Support 36-bit mode.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-16 15:58:22 -05:00

87 lines
2.2 KiB
Plaintext

/*
* MPC8548 CDS Device Tree Source (36-bit address map)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/mpc8548si-pre.dtsi"
/ {
model = "MPC8548CDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
memory {
device_type = "memory";
reg = <0 0 0x0 0x8000000>; // 128M at 0x0
};
board_lbc: lbc: localbus@fe0005000 {
reg = <0xf 0xe0005000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xff000000 0x01000000
0x1 0x0 0xf 0xf8004000 0x00001000>;
};
board_soc: soc: soc8548@fe0000000 {
ranges = <0 0xf 0xe0000000 0x100000>;
};
board_pci0: pci0: pci@fe0008000 {
reg = <0xf 0xe0008000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
clock-frequency = <66666666>;
};
pci1: pci@fe0009000 {
reg = <0xf 0xe0009000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x15 */
0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
};
pci2: pcie@fe000a000 {
reg = <0xf 0xe000a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
rio: rapidio@fe00c0000 {
reg = <0xf 0xe00c0000 0x0 0x20000>;
port1 {
ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
};
};
};
/*
* mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask.
*/
/include/ "fsl/mpc8548si-post.dtsi"
/include/ "mpc8548cds.dtsi"