linux/arch/mips/kernel/cpu-probe.c
Jiaxun Yang 1cb6ab4464 MIPS: Loongson64: Set timer mode in cpu-probe
Loongson64 C and G processors have EXTIMER feature which
is conflicting with CP0 counter.

Although the processor resets in EXTIMER disabled & INTIMER
enabled mode, which is compatible with MIPS CP0 compare, firmware
may attempt to enable EXTIMER and interfere CP0 compare.

Set timer mode back to MIPS compatible mode to fix booting on
systems with such firmware before we have an actual driver for
EXTIMER.

Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-08-08 18:17:43 +02:00

2049 lines
51 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Processor capabilities determination functions.
*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/stddef.h>
#include <linux/export.h>
#include <asm/bugs.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/msa.h>
#include <asm/watch.h>
#include <asm/elf.h>
#include <asm/pgtable-bits.h>
#include <asm/spram.h>
#include <asm/traps.h>
#include <linux/uaccess.h>
#include "fpu-probe.h"
#include <asm/mach-loongson64/cpucfg-emul.h>
/* Hardware capabilities */
unsigned int elf_hwcap __read_mostly;
EXPORT_SYMBOL_GPL(elf_hwcap);
static inline unsigned long cpu_get_msa_id(void)
{
unsigned long status, msa_id;
status = read_c0_status();
__enable_fpu(FPU_64BIT);
enable_msa();
msa_id = read_msa_ir();
disable_msa();
write_c0_status(status);
return msa_id;
}
static int mips_dsp_disabled;
static int __init dsp_disable(char *s)
{
cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
mips_dsp_disabled = 1;
return 1;
}
__setup("nodsp", dsp_disable);
static int mips_htw_disabled;
static int __init htw_disable(char *s)
{
mips_htw_disabled = 1;
cpu_data[0].options &= ~MIPS_CPU_HTW;
write_c0_pwctl(read_c0_pwctl() &
~(1 << MIPS_PWCTL_PWEN_SHIFT));
return 1;
}
__setup("nohtw", htw_disable);
static int mips_ftlb_disabled;
static int mips_has_ftlb_configured;
enum ftlb_flags {
FTLB_EN = 1 << 0,
FTLB_SET_PROB = 1 << 1,
};
static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags);
static int __init ftlb_disable(char *s)
{
unsigned int config4, mmuextdef;
/*
* If the core hasn't done any FTLB configuration, there is nothing
* for us to do here.
*/
if (!mips_has_ftlb_configured)
return 1;
/* Disable it in the boot cpu */
if (set_ftlb_enable(&cpu_data[0], 0)) {
pr_warn("Can't turn FTLB off\n");
return 1;
}
config4 = read_c0_config4();
/* Check that FTLB has been disabled */
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
/* MMUSIZEEXT == VTLB ON, FTLB OFF */
if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) {
/* This should never happen */
pr_warn("FTLB could not be disabled!\n");
return 1;
}
mips_ftlb_disabled = 1;
mips_has_ftlb_configured = 0;
/*
* noftlb is mainly used for debug purposes so print
* an informative message instead of using pr_debug()
*/
pr_info("FTLB has been disabled\n");
/*
* Some of these bits are duplicated in the decode_config4.
* MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case
* once FTLB has been disabled so undo what decode_config4 did.
*/
cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways *
cpu_data[0].tlbsizeftlbsets;
cpu_data[0].tlbsizeftlbsets = 0;
cpu_data[0].tlbsizeftlbways = 0;
return 1;
}
__setup("noftlb", ftlb_disable);
/*
* Check if the CPU has per tc perf counters
*/
static inline void cpu_set_mt_per_tc_perf(struct cpuinfo_mips *c)
{
if (read_c0_config7() & MTI_CONF7_PTC)
c->options |= MIPS_CPU_MT_PER_TC_PERF_COUNTERS;
}
static inline void check_errata(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
switch (current_cpu_type()) {
case CPU_34K:
/*
* Erratum "RPS May Cause Incorrect Instruction Execution"
* This code only handles VPE0, any SMP/RTOS code
* making use of VPE1 will be responsible for that VPE.
*/
if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
break;
default:
break;
}
}
void __init check_bugs32(void)
{
check_errata();
}
/*
* Probe whether cpu has config register by trying to play with
* alternate cache bit and see whether it matters.
* It's used by cpu_probe to distinguish between R3000A and R3081.
*/
static inline int cpu_has_confreg(void)
{
#ifdef CONFIG_CPU_R3000
unsigned long size1, size2;
unsigned long cfg = read_c0_conf();
size1 = r3k_cache_size(ST0_ISC);
write_c0_conf(cfg ^ R30XX_CONF_AC);
size2 = r3k_cache_size(ST0_ISC);
write_c0_conf(cfg);
return size1 != size2;
#else
return 0;
#endif
}
static inline void set_elf_platform(int cpu, const char *plat)
{
if (cpu == 0)
__elf_platform = plat;
}
static inline void set_elf_base_platform(const char *plat)
{
if (__elf_base_platform == NULL) {
__elf_base_platform = plat;
}
}
static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
{
#ifdef __NEED_VMBITS_PROBE
write_c0_entryhi(0x3fffffffffffe000ULL);
back_to_back_c0_hazard();
c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL);
#endif
}
static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
{
switch (isa) {
case MIPS_CPU_ISA_M64R5:
c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5;
set_elf_base_platform("mips64r5");
fallthrough;
case MIPS_CPU_ISA_M64R2:
c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2;
set_elf_base_platform("mips64r2");
fallthrough;
case MIPS_CPU_ISA_M64R1:
c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1;
set_elf_base_platform("mips64");
fallthrough;
case MIPS_CPU_ISA_V:
c->isa_level |= MIPS_CPU_ISA_V;
set_elf_base_platform("mips5");
fallthrough;
case MIPS_CPU_ISA_IV:
c->isa_level |= MIPS_CPU_ISA_IV;
set_elf_base_platform("mips4");
fallthrough;
case MIPS_CPU_ISA_III:
c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III;
set_elf_base_platform("mips3");
break;
/* R6 incompatible with everything else */
case MIPS_CPU_ISA_M64R6:
c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6;
set_elf_base_platform("mips64r6");
fallthrough;
case MIPS_CPU_ISA_M32R6:
c->isa_level |= MIPS_CPU_ISA_M32R6;
set_elf_base_platform("mips32r6");
/* Break here so we don't add incompatible ISAs */
break;
case MIPS_CPU_ISA_M32R5:
c->isa_level |= MIPS_CPU_ISA_M32R5;
set_elf_base_platform("mips32r5");
fallthrough;
case MIPS_CPU_ISA_M32R2:
c->isa_level |= MIPS_CPU_ISA_M32R2;
set_elf_base_platform("mips32r2");
fallthrough;
case MIPS_CPU_ISA_M32R1:
c->isa_level |= MIPS_CPU_ISA_M32R1;
set_elf_base_platform("mips32");
fallthrough;
case MIPS_CPU_ISA_II:
c->isa_level |= MIPS_CPU_ISA_II;
set_elf_base_platform("mips2");
break;
}
}
static char unknown_isa[] = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
{
unsigned int probability = c->tlbsize / c->tlbsizevtlb;
/*
* 0 = All TLBWR instructions go to FTLB
* 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
* FTLB and 1 goes to the VTLB.
* 2 = 7:1: As above with 7:1 ratio.
* 3 = 3:1: As above with 3:1 ratio.
*
* Use the linear midpoint as the probability threshold.
*/
if (probability >= 12)
return 1;
else if (probability >= 6)
return 2;
else
/*
* So FTLB is less than 4 times bigger than VTLB.
* A 3:1 ratio can still be useful though.
*/
return 3;
}
static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags)
{
unsigned int config;
/* It's implementation dependent how the FTLB can be enabled */
switch (c->cputype) {
case CPU_PROAPTIV:
case CPU_P5600:
case CPU_P6600:
/* proAptiv & related cores use Config6 to enable the FTLB */
config = read_c0_config6();
if (flags & FTLB_EN)
config |= MTI_CONF6_FTLBEN;
else
config &= ~MTI_CONF6_FTLBEN;
if (flags & FTLB_SET_PROB) {
config &= ~(3 << MTI_CONF6_FTLBP_SHIFT);
config |= calculate_ftlb_probability(c)
<< MTI_CONF6_FTLBP_SHIFT;
}
write_c0_config6(config);
back_to_back_c0_hazard();
break;
case CPU_I6400:
case CPU_I6500:
/* There's no way to disable the FTLB */
if (!(flags & FTLB_EN))
return 1;
return 0;
case CPU_LOONGSON64:
/* Flush ITLB, DTLB, VTLB and FTLB */
write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB |
LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB);
/* Loongson-3 cores use Config6 to enable the FTLB */
config = read_c0_config6();
if (flags & FTLB_EN)
/* Enable FTLB */
write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS);
else
/* Disable FTLB */
write_c0_config6(config | LOONGSON_CONF6_FTLBDIS);
break;
default:
return 1;
}
return 0;
}
static int mm_config(struct cpuinfo_mips *c)
{
unsigned int config0, update, mm;
config0 = read_c0_config();
mm = config0 & MIPS_CONF_MM;
/*
* It's implementation dependent what type of write-merge is supported
* and whether it can be enabled/disabled. If it is settable lets make
* the merging allowed by default. Some platforms might have
* write-through caching unsupported. In this case just ignore the
* CP0.Config.MM bit field value.
*/
switch (c->cputype) {
case CPU_24K:
case CPU_34K:
case CPU_74K:
case CPU_P5600:
case CPU_P6600:
c->options |= MIPS_CPU_MM_FULL;
update = MIPS_CONF_MM_FULL;
break;
case CPU_1004K:
case CPU_1074K:
case CPU_INTERAPTIV:
case CPU_PROAPTIV:
mm = 0;
fallthrough;
default:
update = 0;
break;
}
if (update) {
config0 = (config0 & ~MIPS_CONF_MM) | update;
write_c0_config(config0);
} else if (mm == MIPS_CONF_MM_SYSAD) {
c->options |= MIPS_CPU_MM_SYSAD;
} else if (mm == MIPS_CONF_MM_FULL) {
c->options |= MIPS_CPU_MM_FULL;
}
return 0;
}
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
int isa, mt;
config0 = read_c0_config();
/*
* Look for Standard TLB or Dual VTLB and FTLB
*/
mt = config0 & MIPS_CONF_MT;
if (mt == MIPS_CONF_MT_TLB)
c->options |= MIPS_CPU_TLB;
else if (mt == MIPS_CONF_MT_FTLB)
c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB;
isa = (config0 & MIPS_CONF_AT) >> 13;
switch (isa) {
case 0:
switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
set_isa(c, MIPS_CPU_ISA_M32R1);
break;
case 1:
set_isa(c, MIPS_CPU_ISA_M32R2);
break;
case 2:
set_isa(c, MIPS_CPU_ISA_M32R6);
break;
default:
goto unknown;
}
break;
case 2:
switch ((config0 & MIPS_CONF_AR) >> 10) {
case 0:
set_isa(c, MIPS_CPU_ISA_M64R1);
break;
case 1:
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
case 2:
set_isa(c, MIPS_CPU_ISA_M64R6);
break;
default:
goto unknown;
}
break;
default:
goto unknown;
}
return config0 & MIPS_CONF_M;
unknown:
panic(unknown_isa, config0);
}
static inline unsigned int decode_config1(struct cpuinfo_mips *c)
{
unsigned int config1;
config1 = read_c0_config1();
if (config1 & MIPS_CONF1_MD)
c->ases |= MIPS_ASE_MDMX;
if (config1 & MIPS_CONF1_PC)
c->options |= MIPS_CPU_PERF;
if (config1 & MIPS_CONF1_WR)
c->options |= MIPS_CPU_WATCH;
if (config1 & MIPS_CONF1_CA)
c->ases |= MIPS_ASE_MIPS16;
if (config1 & MIPS_CONF1_EP)
c->options |= MIPS_CPU_EJTAG;
if (config1 & MIPS_CONF1_FP) {
c->options |= MIPS_CPU_FPU;
c->options |= MIPS_CPU_32FPR;
}
if (cpu_has_tlb) {
c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1;
c->tlbsizevtlb = c->tlbsize;
c->tlbsizeftlbsets = 0;
}
return config1 & MIPS_CONF_M;
}
static inline unsigned int decode_config2(struct cpuinfo_mips *c)
{
unsigned int config2;
config2 = read_c0_config2();
if (config2 & MIPS_CONF2_SL)
c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
return config2 & MIPS_CONF_M;
}
static inline unsigned int decode_config3(struct cpuinfo_mips *c)
{
unsigned int config3;
config3 = read_c0_config3();
if (config3 & MIPS_CONF3_SM) {
c->ases |= MIPS_ASE_SMARTMIPS;
c->options |= MIPS_CPU_RIXI | MIPS_CPU_CTXTC;
}
if (config3 & MIPS_CONF3_RXI)
c->options |= MIPS_CPU_RIXI;
if (config3 & MIPS_CONF3_CTXTC)
c->options |= MIPS_CPU_CTXTC;
if (config3 & MIPS_CONF3_DSP)
c->ases |= MIPS_ASE_DSP;
if (config3 & MIPS_CONF3_DSP2P) {
c->ases |= MIPS_ASE_DSP2P;
if (cpu_has_mips_r6)
c->ases |= MIPS_ASE_DSP3;
}
if (config3 & MIPS_CONF3_VINT)
c->options |= MIPS_CPU_VINT;
if (config3 & MIPS_CONF3_VEIC)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_LPA)
c->options |= MIPS_CPU_LPA;
if (config3 & MIPS_CONF3_MT)
c->ases |= MIPS_ASE_MIPSMT;
if (config3 & MIPS_CONF3_ULRI)
c->options |= MIPS_CPU_ULRI;
if (config3 & MIPS_CONF3_ISA)
c->options |= MIPS_CPU_MICROMIPS;
if (config3 & MIPS_CONF3_VZ)
c->ases |= MIPS_ASE_VZ;
if (config3 & MIPS_CONF3_SC)
c->options |= MIPS_CPU_SEGMENTS;
if (config3 & MIPS_CONF3_BI)
c->options |= MIPS_CPU_BADINSTR;
if (config3 & MIPS_CONF3_BP)
c->options |= MIPS_CPU_BADINSTRP;
if (config3 & MIPS_CONF3_MSA)
c->ases |= MIPS_ASE_MSA;
if (config3 & MIPS_CONF3_PW) {
c->htw_seq = 0;
c->options |= MIPS_CPU_HTW;
}
if (config3 & MIPS_CONF3_CDMM)
c->options |= MIPS_CPU_CDMM;
if (config3 & MIPS_CONF3_SP)
c->options |= MIPS_CPU_SP;
return config3 & MIPS_CONF_M;
}
static inline unsigned int decode_config4(struct cpuinfo_mips *c)
{
unsigned int config4;
unsigned int newcf4;
unsigned int mmuextdef;
unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE;
unsigned long asid_mask;
config4 = read_c0_config4();
if (cpu_has_tlb) {
if (((config4 & MIPS_CONF4_IE) >> 29) == 2)
c->options |= MIPS_CPU_TLBINV;
/*
* R6 has dropped the MMUExtDef field from config4.
* On R6 the fields always describe the FTLB, and only if it is
* present according to Config.MT.
*/
if (!cpu_has_mips_r6)
mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF;
else if (cpu_has_ftlb)
mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT;
else
mmuextdef = 0;
switch (mmuextdef) {
case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT:
c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40;
c->tlbsizevtlb = c->tlbsize;
break;
case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
c->tlbsizevtlb +=
((config4 & MIPS_CONF4_VTLBSIZEEXT) >>
MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40;
c->tlbsize = c->tlbsizevtlb;
ftlb_page = MIPS_CONF4_VFTLBPAGESIZE;
fallthrough;
case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
if (mips_ftlb_disabled)
break;
newcf4 = (config4 & ~ftlb_page) |
(page_size_ftlb(mmuextdef) <<
MIPS_CONF4_FTLBPAGESIZE_SHIFT);
write_c0_config4(newcf4);
back_to_back_c0_hazard();
config4 = read_c0_config4();
if (config4 != newcf4) {
pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n",
PAGE_SIZE, config4);
/* Switch FTLB off */
set_ftlb_enable(c, 0);
mips_ftlb_disabled = 1;
break;
}
c->tlbsizeftlbsets = 1 <<
((config4 & MIPS_CONF4_FTLBSETS) >>
MIPS_CONF4_FTLBSETS_SHIFT);
c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >>
MIPS_CONF4_FTLBWAYS_SHIFT) + 2;
c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets;
mips_has_ftlb_configured = 1;
break;
}
}
c->kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST)
>> MIPS_CONF4_KSCREXIST_SHIFT;
asid_mask = MIPS_ENTRYHI_ASID;
if (config4 & MIPS_CONF4_AE)
asid_mask |= MIPS_ENTRYHI_ASIDX;
set_cpu_asid_mask(c, asid_mask);
/*
* Warn if the computed ASID mask doesn't match the mask the kernel
* is built for. This may indicate either a serious problem or an
* easy optimisation opportunity, but either way should be addressed.
*/
WARN_ON(asid_mask != cpu_asid_mask(c));
return config4 & MIPS_CONF_M;
}
static inline unsigned int decode_config5(struct cpuinfo_mips *c)
{
unsigned int config5, max_mmid_width;
unsigned long asid_mask;
config5 = read_c0_config5();
config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE);
if (cpu_has_mips_r6) {
if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid)
config5 |= MIPS_CONF5_MI;
else
config5 &= ~MIPS_CONF5_MI;
}
write_c0_config5(config5);
if (config5 & MIPS_CONF5_EVA)
c->options |= MIPS_CPU_EVA;
if (config5 & MIPS_CONF5_MRP)
c->options |= MIPS_CPU_MAAR;
if (config5 & MIPS_CONF5_LLB)
c->options |= MIPS_CPU_RW_LLB;
if (config5 & MIPS_CONF5_MVH)
c->options |= MIPS_CPU_MVH;
if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP))
c->options |= MIPS_CPU_VP;
if (config5 & MIPS_CONF5_CA2)
c->ases |= MIPS_ASE_MIPS16E2;
if (config5 & MIPS_CONF5_CRCP)
elf_hwcap |= HWCAP_MIPS_CRC32;
if (cpu_has_mips_r6) {
/* Ensure the write to config5 above takes effect */
back_to_back_c0_hazard();
/* Check whether we successfully enabled MMID support */
config5 = read_c0_config5();
if (config5 & MIPS_CONF5_MI)
c->options |= MIPS_CPU_MMID;
/*
* Warn if we've hardcoded cpu_has_mmid to a value unsuitable
* for the CPU we're running on, or if CPUs in an SMP system
* have inconsistent MMID support.
*/
WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI));
if (cpu_has_mmid) {
write_c0_memorymapid(~0ul);
back_to_back_c0_hazard();
asid_mask = read_c0_memorymapid();
/*
* We maintain a bitmap to track MMID allocation, and
* need a sensible upper bound on the size of that
* bitmap. The initial CPU with MMID support (I6500)
* supports 16 bit MMIDs, which gives us an 8KiB
* bitmap. The architecture recommends that hardware
* support 32 bit MMIDs, which would give us a 512MiB
* bitmap - that's too big in most cases.
*
* Cap MMID width at 16 bits for now & we can revisit
* this if & when hardware supports anything wider.
*/
max_mmid_width = 16;
if (asid_mask > GENMASK(max_mmid_width - 1, 0)) {
pr_info("Capping MMID width at %d bits",
max_mmid_width);
asid_mask = GENMASK(max_mmid_width - 1, 0);
}
set_cpu_asid_mask(c, asid_mask);
}
}
return config5 & MIPS_CONF_M;
}
static void decode_configs(struct cpuinfo_mips *c)
{
int ok;
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK;
c->scache.flags = MIPS_CACHE_NOT_PRESENT;
/* Enable FTLB if present and not disabled */
set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN);
ok = decode_config0(c); /* Read Config registers. */
BUG_ON(!ok); /* Arch spec violation! */
if (ok)
ok = decode_config1(c);
if (ok)
ok = decode_config2(c);
if (ok)
ok = decode_config3(c);
if (ok)
ok = decode_config4(c);
if (ok)
ok = decode_config5(c);
/* Probe the EBase.WG bit */
if (cpu_has_mips_r2_r6) {
u64 ebase;
unsigned int status;
/* {read,write}_c0_ebase_64() may be UNDEFINED prior to r6 */
ebase = cpu_has_mips64r6 ? read_c0_ebase_64()
: (s32)read_c0_ebase();
if (ebase & MIPS_EBASE_WG) {
/* WG bit already set, we can avoid the clumsy probe */
c->options |= MIPS_CPU_EBASE_WG;
} else {
/* Its UNDEFINED to change EBase while BEV=0 */
status = read_c0_status();
write_c0_status(status | ST0_BEV);
irq_enable_hazard();
/*
* On pre-r6 cores, this may well clobber the upper bits
* of EBase. This is hard to avoid without potentially
* hitting UNDEFINED dm*c0 behaviour if EBase is 32-bit.
*/
if (cpu_has_mips64r6)
write_c0_ebase_64(ebase | MIPS_EBASE_WG);
else
write_c0_ebase(ebase | MIPS_EBASE_WG);
back_to_back_c0_hazard();
/* Restore BEV */
write_c0_status(status);
if (read_c0_ebase() & MIPS_EBASE_WG) {
c->options |= MIPS_CPU_EBASE_WG;
write_c0_ebase(ebase);
}
}
}
/* configure the FTLB write probability */
set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB);
mips_probe_watch_registers(c);
#ifndef CONFIG_MIPS_CPS
if (cpu_has_mips_r2_r6) {
unsigned int core;
core = get_ebase_cpunum();
if (cpu_has_mipsmt)
core >>= fls(core_nvpes()) - 1;
cpu_set_core(c, core);
}
#endif
}
/*
* Probe for certain guest capabilities by writing config bits and reading back.
* Finally write back the original value.
*/
#define probe_gc0_config(name, maxconf, bits) \
do { \
unsigned int tmp; \
tmp = read_gc0_##name(); \
write_gc0_##name(tmp | (bits)); \
back_to_back_c0_hazard(); \
maxconf = read_gc0_##name(); \
write_gc0_##name(tmp); \
} while (0)
/*
* Probe for dynamic guest capabilities by changing certain config bits and
* reading back to see if they change. Finally write back the original value.
*/
#define probe_gc0_config_dyn(name, maxconf, dynconf, bits) \
do { \
maxconf = read_gc0_##name(); \
write_gc0_##name(maxconf ^ (bits)); \
back_to_back_c0_hazard(); \
dynconf = maxconf ^ read_gc0_##name(); \
write_gc0_##name(maxconf); \
maxconf |= dynconf; \
} while (0)
static inline unsigned int decode_guest_config0(struct cpuinfo_mips *c)
{
unsigned int config0;
probe_gc0_config(config, config0, MIPS_CONF_M);
if (config0 & MIPS_CONF_M)
c->guest.conf |= BIT(1);
return config0 & MIPS_CONF_M;
}
static inline unsigned int decode_guest_config1(struct cpuinfo_mips *c)
{
unsigned int config1, config1_dyn;
probe_gc0_config_dyn(config1, config1, config1_dyn,
MIPS_CONF_M | MIPS_CONF1_PC | MIPS_CONF1_WR |
MIPS_CONF1_FP);
if (config1 & MIPS_CONF1_FP)
c->guest.options |= MIPS_CPU_FPU;
if (config1_dyn & MIPS_CONF1_FP)
c->guest.options_dyn |= MIPS_CPU_FPU;
if (config1 & MIPS_CONF1_WR)
c->guest.options |= MIPS_CPU_WATCH;
if (config1_dyn & MIPS_CONF1_WR)
c->guest.options_dyn |= MIPS_CPU_WATCH;
if (config1 & MIPS_CONF1_PC)
c->guest.options |= MIPS_CPU_PERF;
if (config1_dyn & MIPS_CONF1_PC)
c->guest.options_dyn |= MIPS_CPU_PERF;
if (config1 & MIPS_CONF_M)
c->guest.conf |= BIT(2);
return config1 & MIPS_CONF_M;
}
static inline unsigned int decode_guest_config2(struct cpuinfo_mips *c)
{
unsigned int config2;
probe_gc0_config(config2, config2, MIPS_CONF_M);
if (config2 & MIPS_CONF_M)
c->guest.conf |= BIT(3);
return config2 & MIPS_CONF_M;
}
static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c)
{
unsigned int config3, config3_dyn;
probe_gc0_config_dyn(config3, config3, config3_dyn,
MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI |
MIPS_CONF3_CTXTC);
if (config3 & MIPS_CONF3_CTXTC)
c->guest.options |= MIPS_CPU_CTXTC;
if (config3_dyn & MIPS_CONF3_CTXTC)
c->guest.options_dyn |= MIPS_CPU_CTXTC;
if (config3 & MIPS_CONF3_PW)
c->guest.options |= MIPS_CPU_HTW;
if (config3 & MIPS_CONF3_ULRI)
c->guest.options |= MIPS_CPU_ULRI;
if (config3 & MIPS_CONF3_SC)
c->guest.options |= MIPS_CPU_SEGMENTS;
if (config3 & MIPS_CONF3_BI)
c->guest.options |= MIPS_CPU_BADINSTR;
if (config3 & MIPS_CONF3_BP)
c->guest.options |= MIPS_CPU_BADINSTRP;
if (config3 & MIPS_CONF3_MSA)
c->guest.ases |= MIPS_ASE_MSA;
if (config3_dyn & MIPS_CONF3_MSA)
c->guest.ases_dyn |= MIPS_ASE_MSA;
if (config3 & MIPS_CONF_M)
c->guest.conf |= BIT(4);
return config3 & MIPS_CONF_M;
}
static inline unsigned int decode_guest_config4(struct cpuinfo_mips *c)
{
unsigned int config4;
probe_gc0_config(config4, config4,
MIPS_CONF_M | MIPS_CONF4_KSCREXIST);
c->guest.kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST)
>> MIPS_CONF4_KSCREXIST_SHIFT;
if (config4 & MIPS_CONF_M)
c->guest.conf |= BIT(5);
return config4 & MIPS_CONF_M;
}
static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c)
{
unsigned int config5, config5_dyn;
probe_gc0_config_dyn(config5, config5, config5_dyn,
MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP);
if (config5 & MIPS_CONF5_MRP)
c->guest.options |= MIPS_CPU_MAAR;
if (config5_dyn & MIPS_CONF5_MRP)
c->guest.options_dyn |= MIPS_CPU_MAAR;
if (config5 & MIPS_CONF5_LLB)
c->guest.options |= MIPS_CPU_RW_LLB;
if (config5 & MIPS_CONF5_MVH)
c->guest.options |= MIPS_CPU_MVH;
if (config5 & MIPS_CONF_M)
c->guest.conf |= BIT(6);
return config5 & MIPS_CONF_M;
}
static inline void decode_guest_configs(struct cpuinfo_mips *c)
{
unsigned int ok;
ok = decode_guest_config0(c);
if (ok)
ok = decode_guest_config1(c);
if (ok)
ok = decode_guest_config2(c);
if (ok)
ok = decode_guest_config3(c);
if (ok)
ok = decode_guest_config4(c);
if (ok)
decode_guest_config5(c);
}
static inline void cpu_probe_guestctl0(struct cpuinfo_mips *c)
{
unsigned int guestctl0, temp;
guestctl0 = read_c0_guestctl0();
if (guestctl0 & MIPS_GCTL0_G0E)
c->options |= MIPS_CPU_GUESTCTL0EXT;
if (guestctl0 & MIPS_GCTL0_G1)
c->options |= MIPS_CPU_GUESTCTL1;
if (guestctl0 & MIPS_GCTL0_G2)
c->options |= MIPS_CPU_GUESTCTL2;
if (!(guestctl0 & MIPS_GCTL0_RAD)) {
c->options |= MIPS_CPU_GUESTID;
/*
* Probe for Direct Root to Guest (DRG). Set GuestCtl1.RID = 0
* first, otherwise all data accesses will be fully virtualised
* as if they were performed by guest mode.
*/
write_c0_guestctl1(0);
tlbw_use_hazard();
write_c0_guestctl0(guestctl0 | MIPS_GCTL0_DRG);
back_to_back_c0_hazard();
temp = read_c0_guestctl0();
if (temp & MIPS_GCTL0_DRG) {
write_c0_guestctl0(guestctl0);
c->options |= MIPS_CPU_DRG;
}
}
}
static inline void cpu_probe_guestctl1(struct cpuinfo_mips *c)
{
if (cpu_has_guestid) {
/* determine the number of bits of GuestID available */
write_c0_guestctl1(MIPS_GCTL1_ID);
back_to_back_c0_hazard();
c->guestid_mask = (read_c0_guestctl1() & MIPS_GCTL1_ID)
>> MIPS_GCTL1_ID_SHIFT;
write_c0_guestctl1(0);
}
}
static inline void cpu_probe_gtoffset(struct cpuinfo_mips *c)
{
/* determine the number of bits of GTOffset available */
write_c0_gtoffset(0xffffffff);
back_to_back_c0_hazard();
c->gtoffset_mask = read_c0_gtoffset();
write_c0_gtoffset(0);
}
static inline void cpu_probe_vz(struct cpuinfo_mips *c)
{
cpu_probe_guestctl0(c);
if (cpu_has_guestctl1)
cpu_probe_guestctl1(c);
cpu_probe_gtoffset(c);
decode_guest_configs(c);
}
#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
| MIPS_CPU_COUNTER)
static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
{
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_R2000:
c->cputype = CPU_R2000;
__cpu_name[cpu] = "R2000";
c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
break;
case PRID_IMP_R3000:
if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
if (cpu_has_confreg()) {
c->cputype = CPU_R3081E;
__cpu_name[cpu] = "R3081";
} else {
c->cputype = CPU_R3000A;
__cpu_name[cpu] = "R3000A";
}
} else {
c->cputype = CPU_R3000;
__cpu_name[cpu] = "R3000";
}
c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS;
c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
MIPS_CPU_NOFPUEX;
if (__cpu_has_fpu())
c->options |= MIPS_CPU_FPU;
c->tlbsize = 64;
break;
case PRID_IMP_R4000:
if (read_c0_config() & CONF_SC) {
if ((c->processor_id & PRID_REV_MASK) >=
PRID_REV_R4400) {
c->cputype = CPU_R4400PC;
__cpu_name[cpu] = "R4400PC";
} else {
c->cputype = CPU_R4000PC;
__cpu_name[cpu] = "R4000PC";
}
} else {
int cca = read_c0_config() & CONF_CM_CMASK;
int mc;
/*
* SC and MC versions can't be reliably told apart,
* but only the latter support coherent caching
* modes so assume the firmware has set the KSEG0
* coherency attribute reasonably (if uncached, we
* assume SC).
*/
switch (cca) {
case CONF_CM_CACHABLE_CE:
case CONF_CM_CACHABLE_COW:
case CONF_CM_CACHABLE_CUW:
mc = 1;
break;
default:
mc = 0;
break;
}
if ((c->processor_id & PRID_REV_MASK) >=
PRID_REV_R4400) {
c->cputype = mc ? CPU_R4400MC : CPU_R4400SC;
__cpu_name[cpu] = mc ? "R4400MC" : "R4400SC";
} else {
c->cputype = mc ? CPU_R4000MC : CPU_R4000SC;
__cpu_name[cpu] = mc ? "R4000MC" : "R4000SC";
}
}
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_VCE |
MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_R4300:
c->cputype = CPU_R4300;
__cpu_name[cpu] = "R4300";
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
c->tlbsize = 32;
break;
case PRID_IMP_R4600:
c->cputype = CPU_R4600;
__cpu_name[cpu] = "R4600";
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
#if 0
case PRID_IMP_R4650:
/*
* This processor doesn't have an MMU, so it's not
* "real easy" to run Linux on it. It is left purely
* for documentation. Commented out because it shares
* its c0_prid id number with the TX3900.
*/
c->cputype = CPU_R4650;
__cpu_name[cpu] = "R4650";
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
#endif
case PRID_IMP_R4700:
c->cputype = CPU_R4700;
__cpu_name[cpu] = "R4700";
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_TX49:
c->cputype = CPU_TX49XX;
__cpu_name[cpu] = "R49XX";
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
c->options = R4K_OPTS | MIPS_CPU_LLSC;
if (!(c->processor_id & 0x08))
c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR;
c->tlbsize = 48;
break;
case PRID_IMP_R5000:
c->cputype = CPU_R5000;
__cpu_name[cpu] = "R5000";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_R5500:
c->cputype = CPU_R5500;
__cpu_name[cpu] = "R5500";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_WATCH | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_NEVADA:
c->cputype = CPU_NEVADA;
__cpu_name[cpu] = "Nevada";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_DIVEC | MIPS_CPU_LLSC;
c->tlbsize = 48;
break;
case PRID_IMP_RM7000:
c->cputype = CPU_RM7000;
__cpu_name[cpu] = "RM7000";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_LLSC;
/*
* Undocumented RM7000: Bit 29 in the info register of
* the RM7000 v2.0 indicates if the TLB has 48 or 64
* entries.
*
* 29 1 => 64 entry JTLB
* 0 => 48 entry JTLB
*/
c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48;
break;
case PRID_IMP_R10000:
c->cputype = CPU_R10000;
__cpu_name[cpu] = "R10000";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
break;
case PRID_IMP_R12000:
c->cputype = CPU_R12000;
__cpu_name[cpu] = "R12000";
set_isa(c, MIPS_CPU_ISA_IV);
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
break;
case PRID_IMP_R14000:
if (((c->processor_id >> 4) & 0x0f) > 2) {
c->cputype = CPU_R16000;
__cpu_name[cpu] = "R16000";
} else {
c->cputype = CPU_R14000;
__cpu_name[cpu] = "R14000";
}
set_isa(c, MIPS_CPU_ISA_IV);
c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
MIPS_CPU_FPU | MIPS_CPU_32FPR |
MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
MIPS_CPU_LLSC;
c->tlbsize = 64;
write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
break;
case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON2E:
c->cputype = CPU_LOONGSON2EF;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2e");
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
break;
case PRID_REV_LOONGSON2F:
c->cputype = CPU_LOONGSON2EF;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2f");
set_isa(c, MIPS_CPU_ISA_III);
c->fpu_msk31 |= FPU_CSR_CONDX;
break;
case PRID_REV_LOONGSON3A_R1:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R1);
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
MIPS_ASE_LOONGSON_EXT);
break;
case PRID_REV_LOONGSON3B_R1:
case PRID_REV_LOONGSON3B_R2:
c->cputype = CPU_LOONGSON64;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3b");
set_isa(c, MIPS_CPU_ISA_M64R1);
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
MIPS_ASE_LOONGSON_EXT);
break;
}
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
MIPS_CPU_32FPR;
c->tlbsize = 64;
set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID);
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
case PRID_IMP_LOONGSON_32: /* Loongson-1 */
decode_configs(c);
c->cputype = CPU_LOONGSON32;
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON1B:
__cpu_name[cpu] = "Loongson 1B";
break;
}
break;
}
}
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_QEMU_GENERIC:
c->writecombine = _CACHE_UNCACHED;
c->cputype = CPU_QEMU_GENERIC;
__cpu_name[cpu] = "MIPS GENERIC QEMU";
break;
case PRID_IMP_4KC:
c->cputype = CPU_4KC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 4Kc";
break;
case PRID_IMP_4KEC:
case PRID_IMP_4KECR2:
c->cputype = CPU_4KEC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 4KEc";
break;
case PRID_IMP_4KSC:
case PRID_IMP_4KSD:
c->cputype = CPU_4KSC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 4KSc";
break;
case PRID_IMP_5KC:
c->cputype = CPU_5KC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 5Kc";
break;
case PRID_IMP_5KE:
c->cputype = CPU_5KE;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 5KE";
break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 20Kc";
break;
case PRID_IMP_24K:
c->cputype = CPU_24K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 24Kc";
break;
case PRID_IMP_24KE:
c->cputype = CPU_24K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 24KEc";
break;
case PRID_IMP_25KF:
c->cputype = CPU_25KF;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 25Kc";
break;
case PRID_IMP_34K:
c->cputype = CPU_34K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 34Kc";
cpu_set_mt_per_tc_perf(c);
break;
case PRID_IMP_74K:
c->cputype = CPU_74K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 74Kc";
break;
case PRID_IMP_M14KC:
c->cputype = CPU_M14KC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS M14Kc";
break;
case PRID_IMP_M14KEC:
c->cputype = CPU_M14KEC;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS M14KEc";
break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 1004Kc";
cpu_set_mt_per_tc_perf(c);
break;
case PRID_IMP_1074K:
c->cputype = CPU_1074K;
c->writecombine = _CACHE_UNCACHED;
__cpu_name[cpu] = "MIPS 1074Kc";
break;
case PRID_IMP_INTERAPTIV_UP:
c->cputype = CPU_INTERAPTIV;
__cpu_name[cpu] = "MIPS interAptiv";
cpu_set_mt_per_tc_perf(c);
break;
case PRID_IMP_INTERAPTIV_MP:
c->cputype = CPU_INTERAPTIV;
__cpu_name[cpu] = "MIPS interAptiv (multi)";
cpu_set_mt_per_tc_perf(c);
break;
case PRID_IMP_PROAPTIV_UP:
c->cputype = CPU_PROAPTIV;
__cpu_name[cpu] = "MIPS proAptiv";
break;
case PRID_IMP_PROAPTIV_MP:
c->cputype = CPU_PROAPTIV;
__cpu_name[cpu] = "MIPS proAptiv (multi)";
break;
case PRID_IMP_P5600:
c->cputype = CPU_P5600;
__cpu_name[cpu] = "MIPS P5600";
break;
case PRID_IMP_P6600:
c->cputype = CPU_P6600;
__cpu_name[cpu] = "MIPS P6600";
break;
case PRID_IMP_I6400:
c->cputype = CPU_I6400;
__cpu_name[cpu] = "MIPS I6400";
break;
case PRID_IMP_I6500:
c->cputype = CPU_I6500;
__cpu_name[cpu] = "MIPS I6500";
break;
case PRID_IMP_M5150:
c->cputype = CPU_M5150;
__cpu_name[cpu] = "MIPS M5150";
break;
case PRID_IMP_M6250:
c->cputype = CPU_M6250;
__cpu_name[cpu] = "MIPS M6250";
break;
}
decode_configs(c);
spram_config();
mm_config(c);
switch (__get_cpu_type(c->cputype)) {
case CPU_M5150:
case CPU_P5600:
set_isa(c, MIPS_CPU_ISA_M32R5);
break;
case CPU_I6500:
c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES;
fallthrough;
case CPU_I6400:
c->options |= MIPS_CPU_SHARED_FTLB_RAM;
fallthrough;
default:
break;
}
/* Recent MIPS cores use the implementation-dependent ExcCode 16 for
* cache/FTLB parity exceptions.
*/
switch (__get_cpu_type(c->cputype)) {
case CPU_PROAPTIV:
case CPU_P5600:
case CPU_P6600:
case CPU_I6400:
case CPU_I6500:
c->options |= MIPS_CPU_FTLBPAREX;
break;
}
}
static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_AU1_REV1:
case PRID_IMP_AU1_REV2:
c->cputype = CPU_ALCHEMY;
switch ((c->processor_id >> 24) & 0xff) {
case 0:
__cpu_name[cpu] = "Au1000";
break;
case 1:
__cpu_name[cpu] = "Au1500";
break;
case 2:
__cpu_name[cpu] = "Au1100";
break;
case 3:
__cpu_name[cpu] = "Au1550";
break;
case 4:
__cpu_name[cpu] = "Au1200";
if ((c->processor_id & PRID_REV_MASK) == 2)
__cpu_name[cpu] = "Au1250";
break;
case 5:
__cpu_name[cpu] = "Au1210";
break;
default:
__cpu_name[cpu] = "Au1xxx";
break;
}
break;
case PRID_IMP_NETLOGIC_AU13XX:
c->cputype = CPU_ALCHEMY;
__cpu_name[cpu] = "Au1300";
break;
}
}
static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_SB1:
c->cputype = CPU_SB1;
__cpu_name[cpu] = "SiByte SB1";
/* FPU in pass1 is known to have issues. */
if ((c->processor_id & PRID_REV_MASK) < 0x02)
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
break;
case PRID_IMP_SB1A:
c->cputype = CPU_SB1A;
__cpu_name[cpu] = "SiByte SB1A";
break;
}
}
static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_SR71000:
c->cputype = CPU_SR71000;
__cpu_name[cpu] = "Sandcraft SR71000";
c->scache.ways = 8;
c->tlbsize = 64;
break;
}
}
static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_PR4450:
c->cputype = CPU_PR4450;
__cpu_name[cpu] = "Philips PR4450";
set_isa(c, MIPS_CPU_ISA_M32R1);
break;
}
}
static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_BMIPS32_REV4:
case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
set_elf_platform(cpu, "bmips32");
break;
case PRID_IMP_BMIPS3300:
case PRID_IMP_BMIPS3300_ALT:
case PRID_IMP_BMIPS3300_BUG:
c->cputype = CPU_BMIPS3300;
__cpu_name[cpu] = "Broadcom BMIPS3300";
set_elf_platform(cpu, "bmips3300");
reserve_exception_space(0x400, VECTORSPACING * 64);
break;
case PRID_IMP_BMIPS43XX: {
int rev = c->processor_id & PRID_REV_MASK;
if (rev >= PRID_REV_BMIPS4380_LO &&
rev <= PRID_REV_BMIPS4380_HI) {
c->cputype = CPU_BMIPS4380;
__cpu_name[cpu] = "Broadcom BMIPS4380";
set_elf_platform(cpu, "bmips4380");
c->options |= MIPS_CPU_RIXI;
reserve_exception_space(0x400, VECTORSPACING * 64);
} else {
c->cputype = CPU_BMIPS4350;
__cpu_name[cpu] = "Broadcom BMIPS4350";
set_elf_platform(cpu, "bmips4350");
}
break;
}
case PRID_IMP_BMIPS5000:
case PRID_IMP_BMIPS5200:
c->cputype = CPU_BMIPS5000;
if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200)
__cpu_name[cpu] = "Broadcom BMIPS5200";
else
__cpu_name[cpu] = "Broadcom BMIPS5000";
set_elf_platform(cpu, "bmips5000");
c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI;
reserve_exception_space(0x1000, VECTORSPACING * 64);
break;
}
}
static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
/* Octeon has different cache interface */
c->options &= ~MIPS_CPU_4K_CACHE;
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_CAVIUM_CN38XX:
case PRID_IMP_CAVIUM_CN31XX:
case PRID_IMP_CAVIUM_CN30XX:
c->cputype = CPU_CAVIUM_OCTEON;
__cpu_name[cpu] = "Cavium Octeon";
goto platform;
case PRID_IMP_CAVIUM_CN58XX:
case PRID_IMP_CAVIUM_CN56XX:
case PRID_IMP_CAVIUM_CN50XX:
case PRID_IMP_CAVIUM_CN52XX:
c->cputype = CPU_CAVIUM_OCTEON_PLUS;
__cpu_name[cpu] = "Cavium Octeon+";
platform:
set_elf_platform(cpu, "octeon");
break;
case PRID_IMP_CAVIUM_CN61XX:
case PRID_IMP_CAVIUM_CN63XX:
case PRID_IMP_CAVIUM_CN66XX:
case PRID_IMP_CAVIUM_CN68XX:
case PRID_IMP_CAVIUM_CNF71XX:
c->cputype = CPU_CAVIUM_OCTEON2;
__cpu_name[cpu] = "Cavium Octeon II";
set_elf_platform(cpu, "octeon2");
break;
case PRID_IMP_CAVIUM_CN70XX:
case PRID_IMP_CAVIUM_CN73XX:
case PRID_IMP_CAVIUM_CNF75XX:
case PRID_IMP_CAVIUM_CN78XX:
c->cputype = CPU_CAVIUM_OCTEON3;
__cpu_name[cpu] = "Cavium Octeon III";
set_elf_platform(cpu, "octeon3");
break;
default:
printk(KERN_INFO "Unknown Octeon chip!\n");
c->cputype = CPU_UNKNOWN;
break;
}
}
#ifdef CONFIG_CPU_LOONGSON64
#include <loongson_regs.h>
static inline void decode_cpucfg(struct cpuinfo_mips *c)
{
u32 cfg1 = read_cpucfg(LOONGSON_CFG1);
u32 cfg2 = read_cpucfg(LOONGSON_CFG2);
u32 cfg3 = read_cpucfg(LOONGSON_CFG3);
if (cfg1 & LOONGSON_CFG1_MMI)
c->ases |= MIPS_ASE_LOONGSON_MMI;
if (cfg2 & LOONGSON_CFG2_LEXT1)
c->ases |= MIPS_ASE_LOONGSON_EXT;
if (cfg2 & LOONGSON_CFG2_LEXT2)
c->ases |= MIPS_ASE_LOONGSON_EXT2;
if (cfg2 & LOONGSON_CFG2_LSPW) {
c->options |= MIPS_CPU_LDPTE;
c->guest.options |= MIPS_CPU_LDPTE;
}
if (cfg3 & LOONGSON_CFG3_LCAMP)
c->ases |= MIPS_ASE_LOONGSON_CAM;
}
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu)
{
c->cputype = CPU_LOONGSON64;
/* All Loongson processors covered here define ExcCode 16 as GSExc. */
decode_configs(c);
c->options |= MIPS_CPU_GSEXCEX;
switch (c->processor_id & PRID_IMP_MASK) {
case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON2K_R1_0:
case PRID_REV_LOONGSON2K_R1_1:
case PRID_REV_LOONGSON2K_R1_2:
case PRID_REV_LOONGSON2K_R1_3:
__cpu_name[cpu] = "Loongson-2K";
set_elf_platform(cpu, "gs264e");
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
}
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT |
MIPS_ASE_LOONGSON_EXT2);
break;
case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */
switch (c->processor_id & PRID_REV_MASK) {
case PRID_REV_LOONGSON3A_R2_0:
case PRID_REV_LOONGSON3A_R2_1:
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
case PRID_REV_LOONGSON3A_R3_0:
case PRID_REV_LOONGSON3A_R3_1:
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
break;
}
/*
* Loongson-3 Classic did not implement MIPS standard TLBINV
* but implemented TLBINVF and EHINV. As currently we're only
* using these two features, enable MIPS_CPU_TLBINV as well.
*
* Also some early Loongson-3A2000 had wrong TLB type in Config
* register, we correct it here.
*/
c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */
change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER,
LOONGSON_CONF6_INTIMER);
break;
case PRID_IMP_LOONGSON_64G:
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R2);
decode_cpucfg(c);
change_c0_config6(LOONGSON_CONF6_EXTIMER | LOONGSON_CONF6_INTIMER,
LOONGSON_CONF6_INTIMER);
break;
default:
panic("Unknown Loongson Processor ID!");
break;
}
}
#else
static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { }
#endif
static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
/*
* XBurst misses a config2 register, so config3 decode was skipped in
* decode_configs().
*/
decode_config3(c);
/* XBurst does not implement the CP0 counter. */
c->options &= ~MIPS_CPU_COUNTER;
BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter);
/* XBurst has virtually tagged icache */
c->icache.flags |= MIPS_CACHE_VTAG;
switch (c->processor_id & PRID_IMP_MASK) {
/* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */
case PRID_IMP_XBURST_REV1:
/*
* The XBurst core by default attempts to avoid branch target
* buffer lookups by detecting & special casing loops. This
* feature will cause BogoMIPS and lpj calculate in error.
* Set cp0 config7 bit 4 to disable this feature.
*/
set_c0_config7(MIPS_CONF7_BTB_LOOP_EN);
switch (c->processor_id & PRID_COMP_MASK) {
/*
* The config0 register in the XBurst CPUs with a processor ID of
* PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
* but they don't actually support this ISA.
*/
case PRID_COMP_INGENIC_D0:
c->isa_level &= ~MIPS_CPU_ISA_M32R2;
/* FPU is not properly detected on JZ4760(B). */
if (c->processor_id == 0x2ed0024f)
c->options |= MIPS_CPU_FPU;
fallthrough;
/*
* The config0 register in the XBurst CPUs with a processor ID of
* PRID_COMP_INGENIC_D0 or PRID_COMP_INGENIC_D1 has an abandoned
* huge page tlb mode, this mode is not compatible with the MIPS
* standard, it will cause tlbmiss and into an infinite loop
* (line 21 in the tlb-funcs.S) when starting the init process.
* After chip reset, the default is HPTLB mode, Write 0xa9000000
* to cp0 register 5 sel 4 to switch back to VTLB mode to prevent
* getting stuck.
*/
case PRID_COMP_INGENIC_D1:
write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS);
break;
default:
break;
}
fallthrough;
/* XBurst®1 with MXU2.0 SIMD ISA */
case PRID_IMP_XBURST_REV2:
/* Ingenic uses the WA bit to achieve write-combine memory writes */
c->writecombine = _CACHE_CACHABLE_WA;
c->cputype = CPU_XBURST;
__cpu_name[cpu] = "Ingenic XBurst";
break;
/* XBurst®2 with MXU2.1 SIMD ISA */
case PRID_IMP_XBURST2:
c->cputype = CPU_XBURST;
__cpu_name[cpu] = "Ingenic XBurst II";
break;
default:
panic("Unknown Ingenic Processor ID!");
break;
}
}
#ifdef CONFIG_64BIT
/* For use by uaccess.h */
u64 __ua_limit;
EXPORT_SYMBOL(__ua_limit);
#endif
const char *__cpu_name[NR_CPUS];
const char *__elf_platform;
const char *__elf_base_platform;
void cpu_probe(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int cpu = smp_processor_id();
/*
* Set a default elf platform, cpu probe may later
* overwrite it with a more precise value
*/
set_elf_platform(cpu, "mips");
c->processor_id = PRID_IMP_UNKNOWN;
c->fpu_id = FPIR_IMP_NONE;
c->cputype = CPU_UNKNOWN;
c->writecombine = _CACHE_UNCACHED;
c->fpu_csr31 = FPU_CSR_RN;
c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
c->processor_id = read_c0_prid();
switch (c->processor_id & PRID_COMP_MASK) {
case PRID_COMP_LEGACY:
cpu_probe_legacy(c, cpu);
break;
case PRID_COMP_MIPS:
cpu_probe_mips(c, cpu);
break;
case PRID_COMP_ALCHEMY:
case PRID_COMP_NETLOGIC:
cpu_probe_alchemy(c, cpu);
break;
case PRID_COMP_SIBYTE:
cpu_probe_sibyte(c, cpu);
break;
case PRID_COMP_BROADCOM:
cpu_probe_broadcom(c, cpu);
break;
case PRID_COMP_SANDCRAFT:
cpu_probe_sandcraft(c, cpu);
break;
case PRID_COMP_NXP:
cpu_probe_nxp(c, cpu);
break;
case PRID_COMP_CAVIUM:
cpu_probe_cavium(c, cpu);
break;
case PRID_COMP_LOONGSON:
cpu_probe_loongson(c, cpu);
break;
case PRID_COMP_INGENIC_13:
case PRID_COMP_INGENIC_D0:
case PRID_COMP_INGENIC_D1:
case PRID_COMP_INGENIC_E1:
cpu_probe_ingenic(c, cpu);
break;
}
BUG_ON(!__cpu_name[cpu]);
BUG_ON(c->cputype == CPU_UNKNOWN);
/*
* Platform code can force the cpu type to optimize code
* generation. In that case be sure the cpu type is correctly
* manually setup otherwise it could trigger some nasty bugs.
*/
BUG_ON(current_cpu_type() != c->cputype);
if (cpu_has_rixi) {
/* Enable the RIXI exceptions */
set_c0_pagegrain(PG_IEC);
back_to_back_c0_hazard();
/* Verify the IEC bit is set */
if (read_c0_pagegrain() & PG_IEC)
c->options |= MIPS_CPU_RIXIEX;
}
if (mips_fpu_disabled)
c->options &= ~MIPS_CPU_FPU;
if (mips_dsp_disabled)
c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P);
if (mips_htw_disabled) {
c->options &= ~MIPS_CPU_HTW;
write_c0_pwctl(read_c0_pwctl() &
~(1 << MIPS_PWCTL_PWEN_SHIFT));
}
if (c->options & MIPS_CPU_FPU)
cpu_set_fpu_opts(c);
else
cpu_set_nofpu_opts(c);
if (cpu_has_mips_r2_r6) {
c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
/* R2 has Performance Counter Interrupt indicator */
c->options |= MIPS_CPU_PCI;
}
else
c->srsets = 1;
if (cpu_has_mips_r6)
elf_hwcap |= HWCAP_MIPS_R6;
if (cpu_has_msa) {
c->msa_id = cpu_get_msa_id();
WARN(c->msa_id & MSA_IR_WRPF,
"Vector register partitioning unimplemented!");
elf_hwcap |= HWCAP_MIPS_MSA;
}
if (cpu_has_mips16)
elf_hwcap |= HWCAP_MIPS_MIPS16;
if (cpu_has_mdmx)
elf_hwcap |= HWCAP_MIPS_MDMX;
if (cpu_has_mips3d)
elf_hwcap |= HWCAP_MIPS_MIPS3D;
if (cpu_has_smartmips)
elf_hwcap |= HWCAP_MIPS_SMARTMIPS;
if (cpu_has_dsp)
elf_hwcap |= HWCAP_MIPS_DSP;
if (cpu_has_dsp2)
elf_hwcap |= HWCAP_MIPS_DSP2;
if (cpu_has_dsp3)
elf_hwcap |= HWCAP_MIPS_DSP3;
if (cpu_has_mips16e2)
elf_hwcap |= HWCAP_MIPS_MIPS16E2;
if (cpu_has_loongson_mmi)
elf_hwcap |= HWCAP_LOONGSON_MMI;
if (cpu_has_loongson_ext)
elf_hwcap |= HWCAP_LOONGSON_EXT;
if (cpu_has_loongson_ext2)
elf_hwcap |= HWCAP_LOONGSON_EXT2;
if (cpu_has_vz)
cpu_probe_vz(c);
cpu_probe_vmbits(c);
/* Synthesize CPUCFG data if running on Loongson processors;
* no-op otherwise.
*
* This looks at previously probed features, so keep this at bottom.
*/
loongson3_cpucfg_synthesize_data(c);
#ifdef CONFIG_64BIT
if (cpu == 0)
__ua_limit = ~((1ull << cpu_vmbits) - 1);
#endif
reserve_exception_space(0, 0x1000);
}
void cpu_report(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
pr_info("CPU%d revision is: %08x (%s)\n",
smp_processor_id(), c->processor_id, cpu_name_string());
if (c->options & MIPS_CPU_FPU)
printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
if (cpu_has_msa)
pr_info("MSA revision is: %08x\n", c->msa_id);
}
void cpu_set_cluster(struct cpuinfo_mips *cpuinfo, unsigned int cluster)
{
/* Ensure the core number fits in the field */
WARN_ON(cluster > (MIPS_GLOBALNUMBER_CLUSTER >>
MIPS_GLOBALNUMBER_CLUSTER_SHF));
cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CLUSTER;
cpuinfo->globalnumber |= cluster << MIPS_GLOBALNUMBER_CLUSTER_SHF;
}
void cpu_set_core(struct cpuinfo_mips *cpuinfo, unsigned int core)
{
/* Ensure the core number fits in the field */
WARN_ON(core > (MIPS_GLOBALNUMBER_CORE >> MIPS_GLOBALNUMBER_CORE_SHF));
cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CORE;
cpuinfo->globalnumber |= core << MIPS_GLOBALNUMBER_CORE_SHF;
}
void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe)
{
/* Ensure the VP(E) ID fits in the field */
WARN_ON(vpe > (MIPS_GLOBALNUMBER_VP >> MIPS_GLOBALNUMBER_VP_SHF));
/* Ensure we're not using VP(E)s without support */
WARN_ON(vpe && !IS_ENABLED(CONFIG_MIPS_MT_SMP) &&
!IS_ENABLED(CONFIG_CPU_MIPSR6));
cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP;
cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF;
}