/* * linux/drivers/mmc/tmio_mmc.c * * Copyright (C) 2004 Ian Molton * Copyright (C) 2007 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Driver for the MMC / SD / SDIO cell found in: * * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 * * This driver draws mainly on scattered spec sheets, Reverse engineering * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit * support). (Further 4 bit support from a later datasheet). * * TODO: * Investigate using a workqueue for PIO transfers * Eliminate FIXMEs * SDIO support * Better Power management * Handle MMC errors better * double buffer support * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define CTL_SD_CMD 0x00 #define CTL_ARG_REG 0x04 #define CTL_STOP_INTERNAL_ACTION 0x08 #define CTL_XFER_BLK_COUNT 0xa #define CTL_RESPONSE 0x0c #define CTL_STATUS 0x1c #define CTL_IRQ_MASK 0x20 #define CTL_SD_CARD_CLK_CTL 0x24 #define CTL_SD_XFER_LEN 0x26 #define CTL_SD_MEM_CARD_OPT 0x28 #define CTL_SD_ERROR_DETAIL_STATUS 0x2c #define CTL_SD_DATA_PORT 0x30 #define CTL_TRANSACTION_CTL 0x34 #define CTL_RESET_SD 0xe0 #define CTL_SDIO_REGS 0x100 #define CTL_CLK_AND_WAIT_CTL 0x138 #define CTL_RESET_SDIO 0x1e0 /* Definitions for values the CTRL_STATUS register can take. */ #define TMIO_STAT_CMDRESPEND 0x00000001 #define TMIO_STAT_DATAEND 0x00000004 #define TMIO_STAT_CARD_REMOVE 0x00000008 #define TMIO_STAT_CARD_INSERT 0x00000010 #define TMIO_STAT_SIGSTATE 0x00000020 #define TMIO_STAT_WRPROTECT 0x00000080 #define TMIO_STAT_CARD_REMOVE_A 0x00000100 #define TMIO_STAT_CARD_INSERT_A 0x00000200 #define TMIO_STAT_SIGSTATE_A 0x00000400 #define TMIO_STAT_CMD_IDX_ERR 0x00010000 #define TMIO_STAT_CRCFAIL 0x00020000 #define TMIO_STAT_STOPBIT_ERR 0x00040000 #define TMIO_STAT_DATATIMEOUT 0x00080000 #define TMIO_STAT_RXOVERFLOW 0x00100000 #define TMIO_STAT_TXUNDERRUN 0x00200000 #define TMIO_STAT_CMDTIMEOUT 0x00400000 #define TMIO_STAT_RXRDY 0x01000000 #define TMIO_STAT_TXRQ 0x02000000 #define TMIO_STAT_ILL_FUNC 0x20000000 #define TMIO_STAT_CMD_BUSY 0x40000000 #define TMIO_STAT_ILL_ACCESS 0x80000000 /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ #define TMIO_MASK_ALL 0x837f031d #define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) #define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) #define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) #define enable_mmc_irqs(host, i) \ do { \ u32 mask;\ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ mask &= ~((i) & TMIO_MASK_IRQ); \ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ } while (0) #define disable_mmc_irqs(host, i) \ do { \ u32 mask;\ mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ mask |= ((i) & TMIO_MASK_IRQ); \ sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ } while (0) #define ack_mmc_irqs(host, i) \ do { \ sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ } while (0) struct tmio_mmc_host { void __iomem *ctl; unsigned long bus_shift; struct mmc_command *cmd; struct mmc_request *mrq; struct mmc_data *data; struct mmc_host *mmc; int irq; /* Callbacks for clock / power control */ void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); /* pio related stuff */ struct scatterlist *sg_ptr; unsigned int sg_len; unsigned int sg_off; struct platform_device *pdev; /* DMA support */ struct dma_chan *chan_rx; struct dma_chan *chan_tx; struct tasklet_struct dma_complete; struct tasklet_struct dma_issue; #ifdef CONFIG_TMIO_MMC_DMA unsigned int dma_sglen; #endif }; static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) { return readw(host->ctl + (addr << host->bus_shift)); } static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, u16 *buf, int count) { readsw(host->ctl + (addr << host->bus_shift), buf, count); } static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) { return readw(host->ctl + (addr << host->bus_shift)) | readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; } static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) { writew(val, host->ctl + (addr << host->bus_shift)); } static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, u16 *buf, int count) { writesw(host->ctl + (addr << host->bus_shift), buf, count); } static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) { writew(val, host->ctl + (addr << host->bus_shift)); writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); } static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) { host->sg_len = data->sg_len; host->sg_ptr = data->sg; host->sg_off = 0; } static int tmio_mmc_next_sg(struct tmio_mmc_host *host) { host->sg_ptr = sg_next(host->sg_ptr); host->sg_off = 0; return --host->sg_len; } static char *tmio_mmc_kmap_atomic(struct scatterlist *sg, unsigned long *flags) { local_irq_save(*flags); return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; } static void tmio_mmc_kunmap_atomic(void *virt, unsigned long *flags) { kunmap_atomic(virt, KM_BIO_SRC_IRQ); local_irq_restore(*flags); } #ifdef CONFIG_MMC_DEBUG #define STATUS_TO_TEXT(a) \ do { \ if (status & TMIO_STAT_##a) \ printk(#a); \ } while (0) void pr_debug_status(u32 status) { printk(KERN_DEBUG "status: %08x = ", status); STATUS_TO_TEXT(CARD_REMOVE); STATUS_TO_TEXT(CARD_INSERT); STATUS_TO_TEXT(SIGSTATE); STATUS_TO_TEXT(WRPROTECT); STATUS_TO_TEXT(CARD_REMOVE_A); STATUS_TO_TEXT(CARD_INSERT_A); STATUS_TO_TEXT(SIGSTATE_A); STATUS_TO_TEXT(CMD_IDX_ERR); STATUS_TO_TEXT(STOPBIT_ERR); STATUS_TO_TEXT(ILL_FUNC); STATUS_TO_TEXT(CMD_BUSY); STATUS_TO_TEXT(CMDRESPEND); STATUS_TO_TEXT(DATAEND); STATUS_TO_TEXT(CRCFAIL); STATUS_TO_TEXT(DATATIMEOUT); STATUS_TO_TEXT(CMDTIMEOUT); STATUS_TO_TEXT(RXOVERFLOW); STATUS_TO_TEXT(TXUNDERRUN); STATUS_TO_TEXT(RXRDY); STATUS_TO_TEXT(TXRQ); STATUS_TO_TEXT(ILL_ACCESS); printk("\n"); } #else #define pr_debug_status(s) do { } while (0) #endif static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) { u32 clk = 0, clock; if (new_clock) { for (clock = host->mmc->f_min, clk = 0x80000080; new_clock >= (clock<<1); clk >>= 1) clock <<= 1; clk |= 0x100; } if (host->set_clk_div) host->set_clk_div(host->pdev, (clk>>22) & 1); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); } static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); msleep(10); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); } static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); msleep(10); } static void reset(struct tmio_mmc_host *host) { /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); msleep(10); sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); msleep(10); } static void tmio_mmc_finish_request(struct tmio_mmc_host *host) { struct mmc_request *mrq = host->mrq; host->mrq = NULL; host->cmd = NULL; host->data = NULL; mmc_request_done(host->mmc, mrq); } /* These are the bitmasks the tmio chip requires to implement the MMC response * types. Note that R1 and R6 are the same in this scheme. */ #define APP_CMD 0x0040 #define RESP_NONE 0x0300 #define RESP_R1 0x0400 #define RESP_R1B 0x0500 #define RESP_R2 0x0600 #define RESP_R3 0x0700 #define DATA_PRESENT 0x0800 #define TRANSFER_READ 0x1000 #define TRANSFER_MULTI 0x2000 #define SECURITY_CMD 0x4000 static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) { struct mmc_data *data = host->data; int c = cmd->opcode; /* Command 12 is handled by hardware */ if (cmd->opcode == 12 && !cmd->arg) { sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); return 0; } switch (mmc_resp_type(cmd)) { case MMC_RSP_NONE: c |= RESP_NONE; break; case MMC_RSP_R1: c |= RESP_R1; break; case MMC_RSP_R1B: c |= RESP_R1B; break; case MMC_RSP_R2: c |= RESP_R2; break; case MMC_RSP_R3: c |= RESP_R3; break; default: pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); return -EINVAL; } host->cmd = cmd; /* FIXME - this seems to be ok commented out but the spec suggest this bit * should be set when issuing app commands. * if(cmd->flags & MMC_FLAG_ACMD) * c |= APP_CMD; */ if (data) { c |= DATA_PRESENT; if (data->blocks > 1) { sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); c |= TRANSFER_MULTI; } if (data->flags & MMC_DATA_READ) c |= TRANSFER_READ; } enable_mmc_irqs(host, TMIO_MASK_CMD); /* Fire off the command */ sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); sd_ctrl_write16(host, CTL_SD_CMD, c); return 0; } /* * This chip always returns (at least?) as much data as you ask for. * I'm unsure what happens if you ask for less than a block. This should be * looked into to ensure that a funny length read doesnt hose the controller. */ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; void *sg_virt; unsigned short *buf; unsigned int count; unsigned long flags; if (!data) { pr_debug("Spurious PIO IRQ\n"); return; } sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); buf = (unsigned short *)(sg_virt + host->sg_off); count = host->sg_ptr->length - host->sg_off; if (count > data->blksz) count = data->blksz; pr_debug("count: %08x offset: %08x flags %08x\n", count, host->sg_off, data->flags); /* Transfer the data */ if (data->flags & MMC_DATA_READ) sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); else sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); host->sg_off += count; tmio_mmc_kunmap_atomic(sg_virt, &flags); if (host->sg_off == host->sg_ptr->length) tmio_mmc_next_sg(host); return; } static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; struct mmc_command *stop; host->data = NULL; if (!data) { dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); return; } stop = data->stop; /* FIXME - return correct transfer count on errors */ if (!data->error) data->bytes_xfered = data->blocks * data->blksz; else data->bytes_xfered = 0; pr_debug("Completed data request\n"); /* * FIXME: other drivers allow an optional stop command of any given type * which we dont do, as the chip can auto generate them. * Perhaps we can be smarter about when to use auto CMD12 and * only issue the auto request when we know this is the desired * stop command, allowing fallback to the stop command the * upper layers expect. For now, we do what works. */ if (data->flags & MMC_DATA_READ) { if (!host->chan_rx) disable_mmc_irqs(host, TMIO_MASK_READOP); dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", host->mrq); } else { if (!host->chan_tx) disable_mmc_irqs(host, TMIO_MASK_WRITEOP); dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", host->mrq); } if (stop) { if (stop->opcode == 12 && !stop->arg) sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); else BUG(); } tmio_mmc_finish_request(host); } static void tmio_mmc_data_irq(struct tmio_mmc_host *host) { struct mmc_data *data = host->data; if (!data) return; if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) { /* * Has all data been written out yet? Testing on SuperH showed, * that in most cases the first interrupt comes already with the * BUSY status bit clear, but on some operations, like mount or * in the beginning of a write / sync / umount, there is one * DATAEND interrupt with the BUSY bit set, in this cases * waiting for one more interrupt fixes the problem. */ if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } } else if (host->chan_rx && (data->flags & MMC_DATA_READ)) { disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } else { tmio_mmc_do_data_irq(host); } } static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) { struct mmc_command *cmd = host->cmd; int i, addr; if (!host->cmd) { pr_debug("Spurious CMD irq\n"); return; } host->cmd = NULL; /* This controller is sicker than the PXA one. Not only do we need to * drop the top 8 bits of the first response word, we also need to * modify the order of the response for short response command types. */ for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) cmd->resp[i] = sd_ctrl_read32(host, addr); if (cmd->flags & MMC_RSP_136) { cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); cmd->resp[3] <<= 8; } else if (cmd->flags & MMC_RSP_R3) { cmd->resp[0] = cmd->resp[3]; } if (stat & TMIO_STAT_CMDTIMEOUT) cmd->error = -ETIMEDOUT; else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) cmd->error = -EILSEQ; /* If there is data to handle we enable data IRQs here, and * we will ultimatley finish the request in the data_end handler. * If theres no data or we encountered an error, finish now. */ if (host->data && !cmd->error) { if (host->data->flags & MMC_DATA_READ) { if (!host->chan_rx) enable_mmc_irqs(host, TMIO_MASK_READOP); } else { struct dma_chan *chan = host->chan_tx; if (!chan) enable_mmc_irqs(host, TMIO_MASK_WRITEOP); else tasklet_schedule(&host->dma_issue); } } else { tmio_mmc_finish_request(host); } return; } static irqreturn_t tmio_mmc_irq(int irq, void *devid) { struct tmio_mmc_host *host = devid; unsigned int ireg, irq_mask, status; pr_debug("MMC IRQ begin\n"); status = sd_ctrl_read32(host, CTL_STATUS); irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); ireg = status & TMIO_MASK_IRQ & ~irq_mask; pr_debug_status(status); pr_debug_status(ireg); if (!ireg) { disable_mmc_irqs(host, status & ~irq_mask); pr_warning("tmio_mmc: Spurious irq, disabling! " "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); pr_debug_status(status); goto out; } while (ireg) { /* Card insert / remove attempts */ if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE); mmc_detect_change(host->mmc, msecs_to_jiffies(100)); } /* CRC and other errors */ /* if (ireg & TMIO_STAT_ERR_IRQ) * handled |= tmio_error_irq(host, irq, stat); */ /* Command completion */ if (ireg & TMIO_MASK_CMD) { ack_mmc_irqs(host, TMIO_MASK_CMD); tmio_mmc_cmd_irq(host, status); } /* Data transfer */ if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); tmio_mmc_pio_irq(host); } /* Data transfer completion */ if (ireg & TMIO_STAT_DATAEND) { ack_mmc_irqs(host, TMIO_STAT_DATAEND); tmio_mmc_data_irq(host); } /* Check status - keep going until we've handled it all */ status = sd_ctrl_read32(host, CTL_STATUS); irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); ireg = status & TMIO_MASK_IRQ & ~irq_mask; pr_debug("Status at end of loop: %08x\n", status); pr_debug_status(status); } pr_debug("MMC IRQ end\n"); out: return IRQ_HANDLED; } #ifdef CONFIG_TMIO_MMC_DMA static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) { #if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) /* Switch DMA mode on or off - SuperH specific? */ sd_ctrl_write16(host, 0xd8, enable ? 2 : 0); #endif } static void tmio_dma_complete(void *arg) { struct tmio_mmc_host *host = arg; dev_dbg(&host->pdev->dev, "Command completed\n"); if (!host->data) dev_warn(&host->pdev->dev, "NULL data in DMA completion!\n"); else enable_mmc_irqs(host, TMIO_STAT_DATAEND); } static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_rx; dma_cookie_t cookie; int ret; ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_FROM_DEVICE); if (ret > 0) { host->dma_sglen = ret; desc = chan->device->device_prep_slave_sg(chan, sg, ret, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } if (desc) { desc->callback = tmio_dma_complete; desc->callback_param = host; cookie = desc->tx_submit(desc); if (cookie < 0) { desc = NULL; ret = cookie; } else { chan->device->device_issue_pending(chan); } } dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) ret = -EIO; host->chan_rx = NULL; dma_release_channel(chan); /* Free the Tx channel too */ chan = host->chan_tx; if (chan) { host->chan_tx = NULL; dma_release_channel(chan); } dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); tmio_mmc_enable_dma(host, false); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, desc, cookie, host->sg_len); } static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr; struct dma_async_tx_descriptor *desc = NULL; struct dma_chan *chan = host->chan_tx; dma_cookie_t cookie; int ret; ret = dma_map_sg(&host->pdev->dev, sg, host->sg_len, DMA_TO_DEVICE); if (ret > 0) { host->dma_sglen = ret; desc = chan->device->device_prep_slave_sg(chan, sg, ret, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); } if (desc) { desc->callback = tmio_dma_complete; desc->callback_param = host; cookie = desc->tx_submit(desc); if (cookie < 0) { desc = NULL; ret = cookie; } } dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); if (!desc) { /* DMA failed, fall back to PIO */ if (ret >= 0) ret = -EIO; host->chan_tx = NULL; dma_release_channel(chan); /* Free the Rx channel too */ chan = host->chan_rx; if (chan) { host->chan_rx = NULL; dma_release_channel(chan); } dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); tmio_mmc_enable_dma(host, false); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, desc, cookie); } static void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { if (data->flags & MMC_DATA_READ) { if (host->chan_rx) tmio_mmc_start_dma_rx(host); } else { if (host->chan_tx) tmio_mmc_start_dma_tx(host); } } static void tmio_issue_tasklet_fn(unsigned long priv) { struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; struct dma_chan *chan = host->chan_tx; chan->device->device_issue_pending(chan); } static void tmio_tasklet_fn(unsigned long arg) { struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; if (host->data->flags & MMC_DATA_READ) dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, DMA_FROM_DEVICE); else dma_unmap_sg(&host->pdev->dev, host->sg_ptr, host->dma_sglen, DMA_TO_DEVICE); tmio_mmc_do_data_irq(host); } /* It might be necessary to make filter MFD specific */ static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) { dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg); chan->private = arg; return true; } static void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) { /* We can only either use DMA for both Tx and Rx or not use it at all */ if (pdata->dma) { dma_cap_mask_t mask; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); host->chan_tx = dma_request_channel(mask, tmio_mmc_filter, pdata->dma->chan_priv_tx); dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, host->chan_tx); if (!host->chan_tx) return; host->chan_rx = dma_request_channel(mask, tmio_mmc_filter, pdata->dma->chan_priv_rx); dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, host->chan_rx); if (!host->chan_rx) { dma_release_channel(host->chan_tx); host->chan_tx = NULL; return; } tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host); tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host); tmio_mmc_enable_dma(host, true); } } static void tmio_mmc_release_dma(struct tmio_mmc_host *host) { if (host->chan_tx) { struct dma_chan *chan = host->chan_tx; host->chan_tx = NULL; dma_release_channel(chan); } if (host->chan_rx) { struct dma_chan *chan = host->chan_rx; host->chan_rx = NULL; dma_release_channel(chan); } } #else static void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data) { } static void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) { host->chan_tx = NULL; host->chan_rx = NULL; } static void tmio_mmc_release_dma(struct tmio_mmc_host *host) { } #endif static int tmio_mmc_start_data(struct tmio_mmc_host *host, struct mmc_data *data) { struct mfd_cell *cell = host->pdev->dev.platform_data; struct tmio_mmc_data *pdata = cell->driver_data; pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", data->blksz, data->blocks); /* Some hardware cannot perform 2 byte requests in 4 bit mode */ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { pr_err("%s: %d byte block unsupported in 4 bit mode\n", mmc_hostname(host->mmc), data->blksz); return -EINVAL; } } tmio_mmc_init_sg(host, data); host->data = data; /* Set transfer length / blocksize */ sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); tmio_mmc_start_dma(host, data); return 0; } /* Process requests from the MMC layer */ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct tmio_mmc_host *host = mmc_priv(mmc); int ret; if (host->mrq) pr_debug("request not null\n"); host->mrq = mrq; if (mrq->data) { ret = tmio_mmc_start_data(host, mrq->data); if (ret) goto fail; } ret = tmio_mmc_start_command(host, mrq->cmd); if (!ret) return; fail: mrq->cmd->error = ret; mmc_request_done(mmc, mrq); } /* Set MMC clock / power. * Note: This controller uses a simple divider scheme therefore it cannot * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as * MMC wont run that fast, it has to be clocked at 12MHz which is the next * slowest setting. */ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct tmio_mmc_host *host = mmc_priv(mmc); if (ios->clock) tmio_mmc_set_clock(host, ios->clock); /* Power sequence - OFF -> ON -> UP */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); break; case MMC_POWER_ON: /* power up SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 1); break; case MMC_POWER_UP: /* start bus clock */ tmio_mmc_clk_start(host); break; } switch (ios->bus_width) { case MMC_BUS_WIDTH_1: sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); break; case MMC_BUS_WIDTH_4: sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); break; } /* Let things settle. delay taken from winCE driver */ udelay(140); } static int tmio_mmc_get_ro(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); struct mfd_cell *cell = host->pdev->dev.platform_data; struct tmio_mmc_data *pdata = cell->driver_data; return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1; } static int tmio_mmc_get_cd(struct mmc_host *mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); struct mfd_cell *cell = host->pdev->dev.platform_data; struct tmio_mmc_data *pdata = cell->driver_data; if (!pdata->get_cd) return -ENOSYS; else return pdata->get_cd(host->pdev); } static const struct mmc_host_ops tmio_mmc_ops = { .request = tmio_mmc_request, .set_ios = tmio_mmc_set_ios, .get_ro = tmio_mmc_get_ro, .get_cd = tmio_mmc_get_cd, }; #ifdef CONFIG_PM static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); int ret; ret = mmc_suspend_host(mmc); /* Tell MFD core it can disable us now.*/ if (!ret && cell->disable) cell->disable(dev); return ret; } static int tmio_mmc_resume(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; /* Tell the MFD core we are ready to be enabled */ if (cell->resume) { ret = cell->resume(dev); if (ret) goto out; } mmc_resume_host(mmc); out: return ret; } #else #define tmio_mmc_suspend NULL #define tmio_mmc_resume NULL #endif static int __devinit tmio_mmc_probe(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct tmio_mmc_data *pdata; struct resource *res_ctl; struct tmio_mmc_host *host; struct mmc_host *mmc; int ret = -EINVAL; u32 irq_mask = TMIO_MASK_CMD; if (dev->num_resources != 2) goto out; res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res_ctl) goto out; pdata = cell->driver_data; if (!pdata || !pdata->hclk) goto out; ret = -ENOMEM; mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev); if (!mmc) goto out; host = mmc_priv(mmc); host->mmc = mmc; host->pdev = dev; platform_set_drvdata(dev, mmc); host->set_pwr = pdata->set_pwr; host->set_clk_div = pdata->set_clk_div; /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ host->bus_shift = resource_size(res_ctl) >> 10; host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); if (!host->ctl) goto host_free; mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; mmc->f_max = pdata->hclk; mmc->f_min = mmc->f_max / 512; mmc->max_segs = 32; mmc->max_blk_size = 512; mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * mmc->max_segs; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; if (pdata->ocr_mask) mmc->ocr_avail = pdata->ocr_mask; else mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { ret = cell->enable(dev); if (ret) goto unmap_ctl; } tmio_mmc_clk_stop(host); reset(host); ret = platform_get_irq(dev, 0); if (ret >= 0) host->irq = ret; else goto cell_disable; disable_mmc_irqs(host, TMIO_MASK_ALL); ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); if (ret) goto cell_disable; /* See if we also get DMA */ tmio_mmc_request_dma(host, pdata); mmc_add_host(mmc); pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), (unsigned long)host->ctl, host->irq); /* Unmask the IRQs we want to know about */ if (!host->chan_rx) irq_mask |= TMIO_MASK_READOP; if (!host->chan_tx) irq_mask |= TMIO_MASK_WRITEOP; enable_mmc_irqs(host, irq_mask); return 0; cell_disable: if (cell->disable) cell->disable(dev); unmap_ctl: iounmap(host->ctl); host_free: mmc_free_host(mmc); out: return ret; } static int __devexit tmio_mmc_remove(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); platform_set_drvdata(dev, NULL); if (mmc) { struct tmio_mmc_host *host = mmc_priv(mmc); mmc_remove_host(mmc); tmio_mmc_release_dma(host); free_irq(host->irq, host); if (cell->disable) cell->disable(dev); iounmap(host->ctl); mmc_free_host(mmc); } return 0; } /* ------------------- device registration ----------------------- */ static struct platform_driver tmio_mmc_driver = { .driver = { .name = "tmio-mmc", .owner = THIS_MODULE, }, .probe = tmio_mmc_probe, .remove = __devexit_p(tmio_mmc_remove), .suspend = tmio_mmc_suspend, .resume = tmio_mmc_resume, }; static int __init tmio_mmc_init(void) { return platform_driver_register(&tmio_mmc_driver); } static void __exit tmio_mmc_exit(void) { platform_driver_unregister(&tmio_mmc_driver); } module_init(tmio_mmc_init); module_exit(tmio_mmc_exit); MODULE_DESCRIPTION("Toshiba TMIO SD/MMC driver"); MODULE_AUTHOR("Ian Molton "); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:tmio-mmc");