According to the ARM ARM, registers CNT{P,V}_TVAL_EL0 have bits [63:32]
RES0 [1]. When reading the register, the value is truncated to the least
significant 32 bits [2], and on writes, TimerValue is treated as a signed
32-bit integer [1, 2].
When the guest behaves correctly and writes 32-bit values, treating TVAL
as an unsigned 64 bit register works as expected. However, things start
to break down when the guest writes larger values, because
(u64)0x1_ffff_ffff = 8589934591. but (s32)0x1_ffff_ffff = -1, and the
former will cause the timer interrupt to be asserted in the future, but
the latter will cause it to be asserted now. Let's treat TVAL as a
signed 32-bit register on writes, to match the behaviour described in
the architecture, and the behaviour experimentally exhibited by the
virtual timer on a non-vhe host.
[1] Arm DDI 0487E.a, section D13.8.18
[2] Arm DDI 0487E.a, section D11.2.4
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
[maz: replaced the read-side mask with lower_32_bits]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 8fa7616248 ("KVM: arm/arm64: arch_timer: Fix CNTP_TVAL calculation")
Link: https://lore.kernel.org/r/20200127103652.2326-1-alexandru.elisei@arm.com
Let the code never use unsupported event counters. Change
kvm_pmu_handle_pmcr() to only reset supported counters and
kvm_pmu_vcpu_reset() to only stop supported counters.
Other actions are filtered on the supported counters in
kvm/sysregs.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-5-eric.auger@redhat.com
At the moment a SW_INCR counter always overflows on 32-bit
boundary, independently on whether the n+1th counter is
programmed as CHAIN.
Check whether the SW_INCR counter is a 64b counter and if so,
implement the 64b logic.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-4-eric.auger@redhat.com
At the moment we update the chain bitmap on type setting. This
does not take into account the enable state of the odd register.
Let's make sure a counter is never considered as chained if
the high counter is disabled.
We recompute the chain state on enable/disable and type changes.
Also let create_perf_event() use the chain bitmap and not use
kvm_pmu_idx_has_chain_evtype().
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-3-eric.auger@redhat.com
The specification says PMSWINC increments PMEVCNTR<n>_EL1 by 1
if PMEVCNTR<n>_EL0 is enabled and configured to count SW_INCR.
For PMEVCNTR<n>_EL0 to be enabled, we need both PMCNTENSET to
be set for the corresponding event counter but we also need
the PMCR.E bit to be set.
Fixes: 7a0adc7064 ("arm64: KVM: Add access handler for PMSWINC register")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200124142535.29386-2-eric.auger@redhat.com
Avoid the "writable" check in __gfn_to_hva_many(), which will always fail
on read-only memslots due to gfn_to_hva() assuming writes. Functionally,
this allows x86 to create large mappings for read-only memslots that
are backed by HugeTLB mappings.
Note, the changelog for commit 05da45583d ("KVM: MMU: large page
support") states "If the largepage contains write-protected pages, a
large pte is not used.", but "write-protected" refers to pages that are
temporarily read-only, e.g. read-only memslots didn't even exist at the
time.
Fixes: 4d8b81abc4 ("KVM: introduce readonly memslot")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the
correct set of memslots is used when handling x86 page faults in SMM.
Fixes: 54bf36aac5 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper, is_transparent_hugepage(), to explicitly check whether a
compound page is a THP and use it when populating KVM's secondary MMU.
The explicit check fixes a bug where a remapped compound page, e.g. for
an XDP Rx socket, is mapped into a KVM guest and is mistaken for a THP,
which results in KVM incorrectly creating a huge page in its secondary
MMU.
Fixes: 936a5fe6e6 ("thp: kvm mmu transparent hugepage support")
Reported-by: syzbot+c9d1fb51ac9d0d10c39d@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check the result of __kvm_gfn_to_hva_cache_init() and return immediately
instead of relying on the kvm_is_error_hva() check to detect errors so
that it's abundantly clear KVM intends to immediately bail on an error.
Note, the hva check is still mandatory to handle errors on subqeuesnt
calls with the same generation. Similarly, always return -EFAULT on
error so that multiple (bad) calls for a given generation will get the
same result, e.g. on an illegal gfn wrap, propagating the return from
__kvm_gfn_to_hva_cache_init() would cause the initial call to return
-EINVAL and subsequent calls to return -EFAULT.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Barret reported a (technically benign) bug where nr_pages_avail can be
accessed without being initialized if gfn_to_hva_many() fails.
virt/kvm/kvm_main.c:2193:13: warning: 'nr_pages_avail' may be
used uninitialized in this function [-Wmaybe-uninitialized]
Rather than simply squashing the warning by initializing nr_pages_avail,
fix the underlying issues by reworking __kvm_gfn_to_hva_cache_init() to
return immediately instead of continuing on. Now that all callers check
the result and/or bail immediately on a bad hva, there's no need to
explicitly nullify the memslot on error.
Reported-by: Barret Rhoden <brho@google.com>
Fixes: f1b9dd5eb8 ("kvm: Disallow wraparound in kvm_gfn_to_hva_cache_init")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When reading/writing using the guest/host cache, check for a bad hva
before checking for a NULL memslot, which triggers the slow path for
handing cross-page accesses. Because the memslot is nullified on error
by __kvm_gfn_to_hva_cache_init(), if the bad hva is encountered after
crossing into a new page, then the kvm_{read,write}_guest() slow path
could potentially write/access the first chunk prior to detecting the
bad hva.
Arguably, performing a partial access is semantically correct from an
architectural perspective, but that behavior is certainly not intended.
In the original implementation, memslot was not explicitly nullified
and therefore the partial access behavior varied based on whether the
memslot itself was null, or if the hva was simply bad. The current
behavior was introduced as a seemingly unintentional side effect in
commit f1b9dd5eb8 ("kvm: Disallow wraparound in
kvm_gfn_to_hva_cache_init"), which justified the change with "since some
callers don't check the return code from this function, it sit seems
prudent to clear ghc->memslot in the event of an error".
Regardless of intent, the partial access is dependent on _not_ checking
the result of the cache initialization, which is arguably a bug in its
own right, at best simply weird.
Fixes: 8f964525a1 ("KVM: Allow cross page reads and writes from cached translations.")
Cc: Jim Mattson <jmattson@google.com>
Cc: Andrew Honig <ahonig@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For ring-based dirty log tracking, it will be more efficient to account
writes during schedule-out or schedule-in to the currently running VCPU.
We would like to do it even if the write doesn't use the current VCPU's
address space, as is the case for cached writes (see commit 4e335d9e7d,
"Revert "KVM: Support vCPU-based gfn->hva cache"", 2017-05-02).
Therefore, add a mechanism to track the currently-loaded kvm_vcpu struct.
There is already something similar in KVM/ARM; one important difference
is that kvm_arch_vcpu_{load,put} have two callers in virt/kvm/kvm_main.c:
we have to update both the architecture-independent vcpu_{load,put} and
the preempt notifiers.
Another change made in the process is to allow using kvm_get_running_vcpu()
in preemptible code. This is allowed because preempt notifiers ensure
that the value does not change even after the VCPU thread is migrated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's already going to reach 2400 Bytes (which is over half of page
size on 4K page archs), so maybe it's good to have this build-time
check in case it overflows when adding new fields.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_read_guest_atomic() because it's not used anywhere.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Open code the allocation and freeing of the vcpu->run page in
kvm_vm_ioctl_create_vcpu() and kvm_vcpu_destroy() respectively. Doing
so allows kvm_vcpu_init() to be a pure init function and eliminates
kvm_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the putting of vcpu->pid to kvm_vcpu_destroy(). vcpu->pid is
guaranteed to be NULL when kvm_vcpu_uninit() is called in the error path
of kvm_vm_ioctl_create_vcpu(), e.g. it is explicitly nullified by
kvm_vcpu_init() and is only changed by KVM_RUN.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_init() and kvm_arch_vcpu_uninit() now that all
arch specific implementations are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an arm specific hook to free the arm64-only sve_state. Doing so
eliminates the last functional code from kvm_arch_vcpu_uninit() across
all architectures and paves the way for removing kvm_arch_vcpu_init()
and kvm_arch_vcpu_uninit() entirely.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold init() into create() now that the two are called back-to-back by
common KVM code (kvm_vcpu_init() calls kvm_arch_vcpu_init() as its last
action, and kvm_vm_ioctl_create_vcpu() calls kvm_arch_vcpu_create()
immediately thereafter). This paves the way for removing
kvm_arch_vcpu_{un}init() entirely.
Note, there is no associated unwinding in kvm_arch_vcpu_uninit() that
needs to be relocated (to kvm_arch_vcpu_destroy()).
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_arch_vcpu_setup() now that all arch specific implementations
are nops.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize the preempt notifier immediately in kvm_vcpu_init() to pave
the way for removing kvm_arch_vcpu_setup(), i.e. to allow arch specific
code to call vcpu_load() during kvm_arch_vcpu_create().
Back when preemption support was added, the location of the call to init
the preempt notifier was perfectly sane. The overall vCPU creation flow
featured a single arch specific hook and the preempt notifer was used
immediately after its initialization (by vcpu_load()). E.g.:
vcpu = kvm_arch_ops->vcpu_create(kvm, n);
if (IS_ERR(vcpu))
return PTR_ERR(vcpu);
preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops);
vcpu_load(vcpu);
r = kvm_mmu_setup(vcpu);
vcpu_put(vcpu);
if (r < 0)
goto free_vcpu;
Today, the call to preempt_notifier_init() is sandwiched between two
arch specific calls, kvm_arch_vcpu_create() and kvm_arch_vcpu_setup(),
which needlessly forces x86 (and possibly others?) to split its vCPU
creation flow. Init the preempt notifier prior to any arch specific
call so that each arch can independently decide how best to organize
its creation flow.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unexport kvm_vcpu_cache and kvm_vcpu_{un}init() and make them static
now that they are referenced only in kvm_main.c.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architectures tightly couple vcpu allocation/free with the
mandatory calls to kvm_{un}init_vcpu(), move the sequences verbatim to
common KVM code.
Move both allocation and initialization in a single patch to eliminate
thrash in arch specific code. The bisection benefits of moving the two
pieces in separate patches is marginal at best, whereas the odds of
introducing a transient arch specific bug are non-zero.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_vcpu_destroy() and wire up all architectures to call the common
function instead of their arch specific implementation. The common
destruction function will be used by future patches to move allocation
and initialization of vCPUs to common KVM code, i.e. to free resources
that are allocated by arch agnostic code.
No functional change intended.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a pre-allocation arch hook to handle checks that are currently done
by arch specific code prior to allocating the vCPU object. This paves
the way for moving the allocation to common KVM code.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the superfluous kvm_arch_vcpu_free() as it is no longer called
from commmon KVM code. Note, kvm_arch_vcpu_destroy() *is* called from
common code, i.e. choosing which function to whack is not completely
arbitrary.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's inject_abt64() injects an external-abort into an aarch64 guest.
The KVM_CAP_ARM_INJECT_EXT_DABT is intended to do exactly this, but
for an aarch32 guest inject_abt32() injects an implementation-defined
exception, 'Lockdown fault'.
Change this to external abort. For non-LPAE we now get the documented:
| Unhandled fault: external abort on non-linefetch (0x008) at 0x9c800f00
and for LPAE:
| Unhandled fault: synchronous external abort (0x210) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-3-james.morse@arm.com
Beata reports that KVM_SET_VCPU_EVENTS doesn't inject the expected
exception to a non-LPAE aarch32 guest.
The host intends to inject DFSR.FS=0x14 "IMPLEMENTATION DEFINED fault
(Lockdown fault)", but the guest receives DFSR.FS=0x04 "Fault on
instruction cache maintenance". This fault is hooked by
do_translation_fault() since ARMv6, which goes on to silently 'handle'
the exception, and restart the faulting instruction.
It turns out, when TTBCR.EAE is clear DFSR is split, and FS[4] has
to shuffle up to DFSR[10].
As KVM only does this in one place, fix up the static values. We
now get the expected:
| Unhandled fault: lock abort (0x404) at 0x9c800f00
Fixes: 74a64a9816 ("KVM: arm/arm64: Unify 32bit fault injection")
Reported-by: Beata Michalska <beata.michalska@linaro.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121123356.203000-2-james.morse@arm.com
kvm_test_age_hva() is called upon mmu_notifier_test_young(), but wrong
address range has been passed to handle_hva_to_gpa(). With the wrong
address range, no young bits will be checked in handle_hva_to_gpa().
It means zero is always returned from mmu_notifier_test_young().
This fixes the issue by passing correct address range to the underly
function handle_hva_to_gpa(), so that the hardware young (access) bit
will be visited.
Fixes: 35307b9a5f ("arm/arm64: KVM: Implement Stage-2 page aging")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200121055659.19560-1-gshan@redhat.com
Our MMIO handling is a bit odd, in the sense that it uses an
intermediate per-vcpu structure to store the various decoded
information that describe the access.
But the same information is readily available in the HSR/ESR_EL2
field, and we actually use this field to populate the structure.
Let's simplify the whole thing by getting rid of the superfluous
structure and save a (tiny) bit of space in the vcpu structure.
[32bit fix courtesy of Olof Johansson <olof@lixom.net>]
Signed-off-by: Marc Zyngier <maz@kernel.org>
The wrappers make it less clear that the position of the call
to kvm_arch_async_page_present depends on the architecture, and
that only one of the two call sites will actually be active.
Remove them.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can store reference to kvm_stats_debugfs_item instead of copying
its values to kvm_stat_data.
This allows us to remove duplicated code and usage of temporary
kvm_stat_data inside vm_stat_get et al.
Signed-off-by: Milan Pandurov <milanpa@amazon.de>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix some wrong function names in comment. mmu_check_roots is a typo for
mmu_check_root, vmcs_read_any should be vmcs12_read_any and so on.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_vgic_register_mmio_region() was introduced in commit 4493b1c486
("KVM: arm/arm64: vgic-new: Add MMIO handling framework") but never
used, and even never implemented. Remove it to avoid confusing readers.
Reported-by: Haibin Wang <wanghaibin.wang@huawei.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200119090604.398-1-yuzenghui@huawei.com
Discard is supposed to fail if the collection is not mapped to any
target redistributor. We currently check if the collection is mapped
by "ite->collection" but this is incomplete (e.g., mapping a LPI to
an unmapped collection also results in a non NULL ite->collection).
What actually needs to be checked is its_is_collection_mapped(), let's
turn to it.
Also take this chance to remove an extra blank line.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200114112212.1411-1-yuzenghui@huawei.com
Confusingly, there are three SPSR layouts that a kernel may need to deal
with:
(1) An AArch64 SPSR_ELx view of an AArch64 pstate
(2) An AArch64 SPSR_ELx view of an AArch32 pstate
(3) An AArch32 SPSR_* view of an AArch32 pstate
When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either
dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions
match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions
match the AArch32 SPSR_* view.
However, when we inject an exception into an AArch32 guest, we have to
synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64
host needs to synthesize layout #3 from layout #2.
This patch adds a new host_spsr_to_spsr32() helper for this, and makes
use of it in the KVM AArch32 support code. For arm64 we need to shuffle
the DIT bit around, and remove the SS bit, while for arm we can use the
value as-is.
I've open-coded the bit manipulation for now to avoid having to rework
the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_*
definitions. I hope to perform a more thorough refactoring in future so
that we can handle pstate view manipulation more consistently across the
kernel tree.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
When KVM injects an exception into a guest, it generates the CPSR value
from scratch, configuring CPSR.{M,A,I,T,E}, and setting all other
bits to zero.
This isn't correct, as the architecture specifies that some CPSR bits
are (conditionally) cleared or set upon an exception, and others are
unchanged from the original context.
This patch adds logic to match the architectural behaviour. To make this
simple to follow/audit/extend, documentation references are provided,
and bits are configured in order of their layout in SPSR_EL2. This
layout can be seen in the diagram on ARM DDI 0487E.a page C5-426.
Note that this code is used by both arm and arm64, and is intended to
fuction with the SPSR_EL2 and SPSR_HYP layouts.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-3-mark.rutland@arm.com
When we check for a poisoned page, we use the VMA to tell userspace
about the looming disaster. But we pass a pointer to this VMA
after having released the mmap_sem, which isn't a good idea.
Instead, stash the shift value that goes with this pfn while
we are holding the mmap_sem.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191211165651.7889-3-maz@kernel.org
Link: https://lore.kernel.org/r/20191217123809.197392-1-james.morse@arm.com
It doesn't needs to call hyp_cpu_pm_exit() in init_hyp_mode() when some
error occurs. hyp_cpu_pm_exit() only needs to be called in
kvm_arch_init() if init_subsystems() fails. So move hyp_cpu_pm_exit()
out from teardown_hyp_mode() and call it directly in kvm_arch_init().
Signed-off-by: Shannon Zhao <shannon.zhao@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1575272531-3204-1-git-send-email-shannon.zhao@linux.alibaba.com
Although guest will hardly read and use the PTZ (Pending Table Zero)
bit in GICR_PENDBASER, let us emulate the architecture strictly.
As per IHI 0069E 9.11.30, PTZ field is WO, and reads as 0.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191220111833.1422-1-yuzenghui@huawei.com
Saving/restoring an unmapped collection is a valid scenario. For
example this happens if a MAPTI command was sent, featuring an
unmapped collection. At the moment the CTE fails to be restored.
Only compare against the number of online vcpus if the rdist
base is set.
Fixes: ea1ad53e1e ("KVM: arm64: vgic-its: Collection table save/restore")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191213094237.19627-1-eric.auger@redhat.com
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit
register, and we should only sign extend the register up to the width of
the register as specified in the operation (by using the 32-bit Wn or
64-bit Xn register specifier).
As it turns out, the architecture provides this decoding information in
the SF ("Sixty-Four" -- how cute...) bit.
Let's take advantage of this with the usual 32-bit/64-bit header file
dance and do the right thing on AArch64 hosts.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
Convert a plethora of parameters and variables in the MMU and page fault
flows from type gva_t to gpa_t to properly handle TDP on 32-bit KVM.
Thanks to PSE and PAE paging, 32-bit kernels can access 64-bit physical
addresses. When TDP is enabled, the fault address is a guest physical
address and thus can be a 64-bit value, even when both KVM and its guest
are using 32-bit virtual addressing, e.g. VMX's VMCS.GUEST_PHYSICAL is a
64-bit field, not a natural width field.
Using a gva_t for the fault address means KVM will incorrectly drop the
upper 32-bits of the GPA. Ditto for gva_to_gpa() when it is used to
translate L2 GPAs to L1 GPAs.
Opportunistically rename variables and parameters to better reflect the
dual address modes, e.g. use "cr2_or_gpa" for fault addresses and plain
"addr" instead of "vaddr" when the address may be either a GVA or an L2
GPA. Similarly, use "gpa" in the nonpaging_page_fault() flows to avoid
a confusing "gpa_t gva" declaration; this also sets the stage for a
future patch to combing nonpaging_page_fault() and tdp_page_fault() with
minimal churn.
Sprinkle in a few comments to document flows where an address is known
to be a GVA and thus can be safely truncated to a 32-bit value. Add
WARNs in kvm_handle_page_fault() and FNAME(gva_to_gpa_nested)() to help
document such cases and detect bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use out_err jump label to handle resource release. It's a
good practice to release resource in one place and help
eliminate some duplicated code.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can get rid of unnecessary var page in
kvm_set_pfn_dirty() , thus make code style
similar with kvm_set_pfn_accessed().
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix a bug where we try to do an ultracall on a system without an
ultravisor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl35s5kACgkQnZrqdyxj
cZ8cwwf/UPCvZIYPSeYvzrCrlA+wlhBAh3bh47+ZXaNybOpss1xZ7QOFGkgoVBkn
ES2Sdx3qgLvhmbR+nEKon8YCDVSwUj2ehwJu1nzAUzuVYw+m8OHGjdW07+go5KKi
xZOndwBQGYaaWxch2O8Qw27TZU4lcVY/FNQiti5Ahg9dKK98CLyMsWnTms23ZjGD
JMN/jCoMxa6godxWk3mSLaIwXj8P1P4pH3oiMFF8ngRTqyMgi1l02wim+DV10rD4
5JoAF2kzSYngDlrhhQAsSOWrsWst1X2txcHA2QsoL7ZGYUQzzKyHH6zC6dS9eWk4
ni70RLEnJj8YpsjwT52tFYokxwTPfQ==
=kPkE
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix for 5.5
- Fix a bug where we try to do an ultracall on a system without an
ultravisor.
A device mapping is normally always mapped at Stage-2, since there
is very little gain in having it faulted in.
Nonetheless, it is possible to end-up in a situation where the device
mapping has been removed from Stage-2 (userspace munmaped the VFIO
region, and the MMU notifier did its job), but present in a userspace
mapping (userpace has mapped it back at the same address). In such
a situation, the device mapping will be demand-paged as the guest
performs memory accesses.
This requires to be careful when dealing with mapping size, cache
management, and to handle potential execution of a device mapping.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191211165651.7889-2-maz@kernel.org
In kvm_arch_prepare_memory_region, arm kvm regards the memory region as
writable if the flag has no KVM_MEM_READONLY, and the vm is readonly if
!VM_WRITE.
But there is common usage for setting kvm memory region as follows:
e.g. qemu side (see the PROT_NONE flag)
1. mmap(NULL, size, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
memory_region_init_ram_ptr()
2. re mmap the above area with read/write authority.
Such example is used in virtio-fs qemu codes which hasn't been upstreamed
[1]. But seems we can't forbid this example.
Without this patch, it will cause an EPERM during kvm_set_memory_region()
and cause qemu boot crash.
As told by Ard, "the underlying assumption is incorrect, i.e., that the
value of vm_flags at this point in time defines how the VMA is used
during its lifetime. There may be other cases where a VMA is created
with VM_READ vm_flags that are changed to VM_READ|VM_WRITE later, and
we are currently rejecting this use case as well."
[1] https://gitlab.com/virtio-fs/qemu/blob/5a356e/hw/virtio/vhost-user-fs.c#L488
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191206020802.196108-1-justin.he@arm.com
Use wrapper function lock_all_vcpus()/unlock_all_vcpus()
in kvm_vgic_create() to remove duplicated code dealing
with locking and unlocking all vcpus in a vm.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1575081918-11401-1-git-send-email-linmiaohe@huawei.com
In kvm_vgic_dist_init() called from kvm_vgic_map_resources(), if
dist->vgic_model is invalid, dist->spis will be freed without set
dist->spis = NULL. And in vgicv2 resources clean up path,
__kvm_vgic_destroy() will be called to free allocated resources.
And dist->spis will be freed again in clean up chain because we
forget to set dist->spis = NULL in kvm_vgic_dist_init() failed
path. So double free would happen.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1574923128-19956-1-git-send-email-linmiaohe@huawei.com
As arg dummy is not really needed, there's no need to pass
NULL when calling cpu_init_hyp_mode(). So clean it up.
Fixes: 67f6919766 ("arm64: kvm: allows kvm cpu hotplug")
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1574320559-5662-1-git-send-email-linmiaohe@huawei.com
The jump label out_free_1 and out_free_2 deal with
the same stuff, so git rid of one and rename the
label out_free_0a to retain the label name order.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
-----BEGIN PGP SIGNATURE-----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=SxBH
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for Linux 5.5:
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
Conflicts:
include/uapi/linux/kvm.h
Fetching an index for any vcpu in kvm->vcpus array by traversing
the entire array everytime is costly.
This patch remembers the position of each vcpu in kvm->vcpus array
by storing it in vcpus_idx under kvm_vcpu structure.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The out_err label and var ret is unnecessary, clean them up.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment explaining the rational behind having both
no_compat open and ioctl callbacks to fend off compat tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On a system without KVM_COMPAT, we prevent IOCTLs from being issued
by a compat task. Although this prevents most silly things from
happening, it can still confuse a 32bit userspace that is able
to open the kvm device (the qemu test suite seems to be pretty
mad with this behaviour).
Take a more radical approach and return a -ENODEV to the compat
task.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VT-d posted interrupts, DAX/ZONE_DEVICE,
module unload/reload.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdyrEsAAoJEL/70l94x66DIOkH/Asqrh4o4pwfRHWE+9rnM6PI
j8oFi7Q4eRXJnP4zEMnMbb6xD/BfSH1tWEcPcYgIxD/t0DFx8F92/xsETAJ/Qc5n
CWpmnhMkJqERlV+GSRuBqnheMo0CEH1Ab1QZKhh5U3//pK3OtGY9WyydJHWcquTh
bGh2pnxwVZOtIIEmclUUfKjyR2Fu8hJLnQwzWgYZ27UK7J2pLmiiTX0vwQG359Iq
sDn9ND33pCBW5e/D2mzccRjOJEvzwrumewM1sRDsoAYLJzUjg9+xD83vZDa1d7R6
gajCDFWVJbPoLvUY+DgsZBwMMlogElimJMT/Zft3ERbCsYJbFvcmwp4JzyxDxQ4=
=J6KN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Fix unwinding of KVM_CREATE_VM failure, VT-d posted interrupts,
DAX/ZONE_DEVICE, and module unload/reload"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved
KVM: VMX: Introduce pi_is_pir_empty() helper
KVM: VMX: Do not change PID.NDST when loading a blocked vCPU
KVM: VMX: Consider PID.PIR to determine if vCPU has pending interrupts
KVM: VMX: Fix comment to specify PID.ON instead of PIR.ON
KVM: X86: Fix initialization of MSR lists
KVM: fix placement of refcount initialization
KVM: Fix NULL-ptr deref after kvm_create_vm fails
Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis. For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup(). But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.
This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().
Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()). But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.
[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl
Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a6 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
=============================
WARNING: suspicious RCU usage
-----------------------------
./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by repro_11/12688.
stack backtrace:
Call Trace:
dump_stack+0x7d/0xc5
lockdep_rcu_suspicious+0x123/0x170
kvm_dev_ioctl+0x9a9/0x1260 [kvm]
do_vfs_ioctl+0x1a1/0xfb0
ksys_ioctl+0x6d/0x80
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0x108/0xaa0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit a97b0e773e (kvm: call kvm_arch_destroy_vm if vm creation fails)
sets users_count to 1 before kvm_arch_init_vm(), however, if kvm_arch_init_vm()
fails, we need to decrease this count. By moving it earlier, we can push
the decrease to out_err_no_arch_destroy_vm without introducing yet another
error label.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=15209b84e00000
Reported-by: syzbot+75475908cd0910f141ee@syzkaller.appspotmail.com
Fixes: a97b0e773e ("kvm: call kvm_arch_destroy_vm if vm creation fails")
Cc: Jim Mattson <jmattson@google.com>
Analyzed-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported by syzkaller:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 14727 Comm: syz-executor.3 Not tainted 5.4.0-rc4+ #0
RIP: 0010:kvm_coalesced_mmio_init+0x5d/0x110 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:121
Call Trace:
kvm_dev_ioctl_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:3446 [inline]
kvm_dev_ioctl+0x781/0x1490 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3494
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0x196/0x1150 fs/ioctl.c:696
ksys_ioctl+0x62/0x90 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x6e/0xb0 fs/ioctl.c:718
do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Commit 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
moves memslots and buses allocations around, however, if kvm->srcu/irq_srcu fails
initialization, NULL will be returned instead of error code, NULL will not be intercepted
in kvm_dev_ioctl_create_vm() and be dereferenced by kvm_coalesced_mmio_init(), this patch
fixes it.
Moving the initialization is required anyway to avoid an incorrect synchronize_srcu that
was also reported by syzkaller:
wait_for_completion+0x29c/0x440 kernel/sched/completion.c:136
__synchronize_srcu+0x197/0x250 kernel/rcu/srcutree.c:921
synchronize_srcu_expedited kernel/rcu/srcutree.c:946 [inline]
synchronize_srcu+0x239/0x3e8 kernel/rcu/srcutree.c:997
kvm_page_track_unregister_notifier+0xe7/0x130 arch/x86/kvm/page_track.c:212
kvm_mmu_uninit_vm+0x1e/0x30 arch/x86/kvm/mmu.c:5828
kvm_arch_destroy_vm+0x4a2/0x5f0 arch/x86/kvm/x86.c:9579
kvm_create_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:702 [inline]
so do it.
Reported-by: syzbot+89a8060879fa0bd2db4f@syzkaller.appspotmail.com
Reported-by: syzbot+e27e7027eb2b80e44225@syzkaller.appspotmail.com
Fixes: 9121923c45 ("kvm: Allocate memslots and buses before calling kvm_arch_init_vm")
Cc: Jim Mattson <jmattson@google.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just like we do for WFE trapping, it can be useful to turn off
WFI trapping when the physical CPU is not oversubscribed (that
is, the vcpu is the only runnable process on this CPU) *and*
that we're using direct injection of interrupts.
The conditions are reevaluated on each vcpu_load(), ensuring that
we don't switch to this mode on a busy system.
On a GICv4 system, this has the effect of reducing the generation
of doorbell interrupts to zero when the right conditions are
met, which is a huge improvement over the current situation
(where the doorbells are screaming if the CPU ever hits a
blocking WFI).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
In order to find out whether a vcpu is likely to be the target of
VLPIs (and to further optimize the way we deal with those), let's
track the number of VLPIs a vcpu can receive.
This gets implemented with an atomic variable that gets incremented
or decremented on map, unmap and move of a VLPI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-2-maz@kernel.org
The timers are canceled from an preempt-notifier which is invoked with
disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context
on -RT.
Let the timer expire on hard-IRQ context even on -RT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191107095424.16647-1-bigeasy@linutronix.de
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution. This removes the performance penalty
for walking deeper EPT page tables.
By default, one large page will last about one hour once the guest
reaches a steady state.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a function to create a kernel thread associated with a given VM. In
particular, it ensures that the worker thread inherits the priority and
cgroups of the calling thread.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In kvm_create_vm(), if we've successfully called kvm_arch_init_vm(), but
then fail later in the function, we need to call kvm_arch_destroy_vm()
so that it can do any necessary cleanup (like freeing memory).
Fixes: 44a95dae1d ("KVM: x86: Detect and Initialize AVIC support")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
[Remove dependency on "kvm: Don't clear reference count on
kvm_create_vm() error path" which was not committed. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's possible that two LPIs locate in the same "byte_offset" but target
two different vcpus, where their pending status are indicated by two
different pending tables. In such a scenario, using last_byte_offset
optimization will lead KVM relying on the wrong pending table entry.
Let us use last_ptr instead, which can be treated as a byte index into
a pending table and also, can be vcpu specific.
Fixes: 280771252c ("KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES")
Cc: stable@vger.kernel.org
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20191029071919.177-4-yuzenghui@huawei.com
Fix various comments, including wrong function names, grammar mistakes
and specification references.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191029071919.177-3-yuzenghui@huawei.com
When the VHE code was reworked, a lot of the vgic stuff was moved around,
but the GICv4 residency code did stay untouched, meaning that we come
in and out of residency on each flush/sync, which is obviously suboptimal.
To address this, let's move things around a bit:
- Residency entry (flush) moves to vcpu_load
- Residency exit (sync) moves to vcpu_put
- On blocking (entry to WFI), we "put"
- On unblocking (exit from WFI), we "load"
Because these can nest (load/block/put/load/unblock/put, for example),
we now have per-VPE tracking of the residency state.
Additionally, vgic_v4_put gains a "need doorbell" parameter, which only
gets set to true when blocking because of a WFI. This allows a finer
control of the doorbell, which now also gets disabled as soon as
it gets signaled.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191027144234.8395-2-maz@kernel.org
This reorganization will allow us to call kvm_arch_destroy_vm in the
event that kvm_create_vm fails after calling kvm_arch_init_vm.
Suggested-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed
reference[*] to the VM when installing a new file descriptor fails. KVM
expects the refcount to remain valid in this case, as the in-progress
ioctl() has an explicit reference to the VM. The primary motiviation
for the helper is to document that the 'kvm' pointer is still valid
after putting the borrowed reference, e.g. to document that doing
mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken.
[*] When exposing a new object to userspace via a file descriptor, e.g.
a new vcpu, KVM grabs a reference to itself (the VM) prior to making
the object visible to userspace to avoid prematurely freeing the VM
in the scenario where userspace immediately closes file descriptor.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Special PMU edition:
- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
-----BEGIN PGP SIGNATURE-----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=ORrS
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.4, take #2
Special PMU edition:
- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host
side polling is disabled.
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow user space to inform the KVM host where in the physical memory
map the paravirtualized time structures should be located.
User space can set an attribute on the VCPU providing the IPA base
address of the stolen time structure for that VCPU. This must be
repeated for every VCPU in the VM.
The address is given in terms of the physical address visible to
the guest and must be 64 byte aligned. The guest will discover the
address via a hypercall.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently a kvm_device_ops structure cannot be const without triggering
compiler warnings. However the structure doesn't need to be written to
and, by marking it const, it can be read-only in memory. Add some more
const keywords to allow this.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implement the service call for configuring a shared structure between a
VCPU and the hypervisor in which the hypervisor can write the time
stolen from the VCPU's execution time by other tasks on the host.
User space allocates memory which is placed at an IPA also chosen by user
space. The hypervisor then updates the shared structure using
kvm_put_guest() to ensure single copy atomicity of the 64-bit value
reporting the stolen time in nanoseconds.
Whenever stolen time is enabled by the guest, the stolen time counter is
reset.
The stolen time itself is retrieved from the sched_info structure
maintained by the Linux scheduler code. We enable SCHEDSTATS when
selecting KVM Kconfig to ensure this value is meaningful.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
This provides a mechanism for querying which paravirtualized time
features are available in this hypervisor.
Also add the header file which defines the ABI for the paravirtualized
time features we're about to add.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently intertwine the KVM PSCI implementation with the general
dispatch of hypercall handling, which makes perfect sense because PSCI
is the only category of hypercalls we support.
However, as we are about to support additional hypercalls, factor out
this functionality into a separate hypercall handler file.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
[steven.price@arm.com: rebased]
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In some scenarios, such as buggy guest or incorrect configuration of the
VMM and firmware description data, userspace will detect a memory access
to a portion of the IPA, which is not mapped to any MMIO region.
For this purpose, the appropriate action is to inject an external abort
to the guest. The kernel already has functionality to inject an
external abort, but we need to wire up a signal from user space that
lets user space tell the kernel to do this.
It turns out, we already have the set event functionality which we can
perfectly reuse for this.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:
load/store instruction decoding not implemented
The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.
However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice. It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more. It doesn't appear likely that we'll ever implement
this in the kernel.
What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space. In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.
It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.
This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace. User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The PMU emulation code uses the perf event sample period to trigger
the overflow detection. This works fine for the *first* overflow
handling, but results in a huge number of interrupts on the host,
unrelated to the number of interrupts handled in the guest (a x20
factor is pretty common for the cycle counter). On a slow system
(such as a SW model), this can result in the guest only making
forward progress at a glacial pace.
It turns out that the clue is in the name. The sample period is
exactly that: a period. And once the an overflow has occured,
the following period should be the full width of the associated
counter, instead of whatever the guest had initially programed.
Reset the sample period to the architected value in the overflow
handler, which now results in a number of host interrupts that is
much closer to the number of interrupts in the guest.
Fixes: b02386eb7d ("arm64: KVM: Add PMU overflow interrupt routing")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The current convention for KVM to request a chained event from the
host PMU is to set bit[0] in attr.config1 (PERF_ATTR_CFG1_KVM_PMU_CHAINED).
But as it turns out, this bit gets set *after* we create the kernel
event that backs our virtual counter, meaning that we never get
a 64bit counter.
Moving the setting to an earlier point solves the problem.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a counter is disabled, its value is sampled before the event
is being disabled, and the value written back in the shadow register.
In that process, the value gets truncated to 32bit, which is adequate
for any counter but the cycle counter (defined as a 64bit counter).
This obviously results in a corrupted counter, and things like
"perf record -e cycles" not working at all when run in a guest...
A similar, but less critical bug exists in kvm_pmu_get_counter_value.
Make the truncation conditional on the counter not being the cycle
counter, which results in a minor code reorganisation.
Fixes: 80f393a23b ("KVM: arm/arm64: Support chained PMU counters")
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reported-by: Julien Thierry <julien.thierry.kdev@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
-----BEGIN PGP SIGNATURE-----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=9luB
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.4, take #1
- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed. Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.
Cc: kvm-ppc@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
and bugfixes
* PPC: various minor fixes and preparation
* x86: bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT), some IPI optimizations
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
=w6I3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"s390:
- ioctl hardening
- selftests
ARM:
- ITS translation cache
- support for 512 vCPUs
- various cleanups and bugfixes
PPC:
- various minor fixes and preparation
x86:
- bugfixes all over the place (posted interrupts, SVM, emulation
corner cases, blocked INIT)
- some IPI optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
KVM: X86: Use IPI shorthands in kvm guest when support
KVM: x86: Fix INIT signal handling in various CPU states
KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
KVM: VMX: Stop the preemption timer during vCPU reset
KVM: LAPIC: Micro optimize IPI latency
kvm: Nested KVM MMUs need PAE root too
KVM: x86: set ctxt->have_exception in x86_decode_insn()
KVM: x86: always stop emulation on page fault
KVM: nVMX: trace nested VM-Enter failures detected by H/W
KVM: nVMX: add tracepoint for failed nested VM-Enter
x86: KVM: svm: Fix a check in nested_svm_vmrun()
KVM: x86: Return to userspace with internal error on unexpected exit reason
KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
doc: kvm: Fix return description of KVM_SET_MSRS
KVM: X86: Tune PLE Window tracepoint
KVM: VMX: Change ple_window type to unsigned int
KVM: X86: Remove tailing newline for tracepoints
KVM: X86: Trace vcpu_id for vmexit
KVM: x86: Manually calculate reserved bits when loading PDPTRS
...
The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result. This change sanity checks the index
before using it for writing to a potentially arbitrary address.
This fixes CVE-2019-14821.
Cc: stable@vger.kernel.org
Fixes: 5f94c1741b ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 49dfe94fe5 ("KVM: arm/arm64: Fix TRACE_INCLUDE_PATH") fixes
TRACE_INCLUDE_PATH to the correct relative path to the define_trace.h
and explains why did the old one work.
The same fix should be applied to virt/kvm/arm/vgic/trace.h.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.
One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.
Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:
vcpu_id = 256 * vcpu2_index + vcpu_index
With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.
Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- Fix GICv2 emulation bug (KVM)
- Fix deadlock in virtual GIC interrupt injection code (KVM)
- Fix kprobes blacklist init failure due to broken kallsyms lookup
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1mW/0ACgkQt6xw3ITB
YzQWEQgAnG+20c1uzPqIEME3o0bCXsci0I1w4yPYPH/NVrfmJdAjfway/cLZlMCh
JYKBTc392kfYXgzAvMqvjNe+9O/qg9MnMxV7Afjfk9e0k+41Kcw/7U39/B6q4yOg
zIz4YW6SdbbbUfY9VgR8SjsZ3HwJoP8YVNEv3W259funtFHkKDO35h1iG1f57GWL
UELjEnag9dmCH35ykt7+SC4woBGjOQnic2XLSS7VZuU/26TfnUyo2HCdDcLcViCZ
DHDQgaHAscb+tgJjeNtNEeRu+GPBG9LOhPw4EpBjGHeoJla7z74GOJPMEt4Ufoqd
qG9TPfOFAFM30/PAdlWF3SjfzqK3PA==
=WYzY
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Hot on the heels of our last set of fixes are a few more for -rc7.
Two of them are fixing issues with our virtual interrupt controller
implementation in KVM/arm, while the other is a longstanding but
straightforward kallsyms fix which was been acked by Masami and
resolves an initialisation failure in kprobes observed on arm64.
- Fix GICv2 emulation bug (KVM)
- Fix deadlock in virtual GIC interrupt injection code (KVM)
- Fix kprobes blacklist init failure due to broken kallsyms lookup"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI
KVM: arm/arm64: vgic: Fix potential deadlock when ap_list is long
kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol
