The memory size of tls_ctx->rx.iv for AES128-CCM is 12 setting in
tls_set_sw_offload(). The return value of crypto_aead_ivsize()
for "ccm(aes)" is 16. So memcpy() require 16 bytes from 12 bytes
memory space will trigger slab-out-of-bounds bug as following:
==================================================================
BUG: KASAN: slab-out-of-bounds in decrypt_internal+0x385/0xc40 [tls]
Read of size 16 at addr ffff888114e84e60 by task tls/10911
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x5e/0x5db
? decrypt_internal+0x385/0xc40 [tls]
kasan_report+0xab/0x120
? decrypt_internal+0x385/0xc40 [tls]
kasan_check_range+0xf9/0x1e0
memcpy+0x20/0x60
decrypt_internal+0x385/0xc40 [tls]
? tls_get_rec+0x2e0/0x2e0 [tls]
? process_rx_list+0x1a5/0x420 [tls]
? tls_setup_from_iter.constprop.0+0x2e0/0x2e0 [tls]
decrypt_skb_update+0x9d/0x400 [tls]
tls_sw_recvmsg+0x3c8/0xb50 [tls]
Allocated by task 10911:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
tls_set_sw_offload+0x2eb/0xa20 [tls]
tls_setsockopt+0x68c/0x700 [tls]
__sys_setsockopt+0xfe/0x1b0
Replace the crypto_aead_ivsize() with prot->iv_size + prot->salt_size
when memcpy() iv value in TLS_1_3_VERSION scenario.
Fixes: f295b3ae9f ("net/tls: Add support of AES128-CCM based ciphers")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is known that priority setting HW offload when set tls TX/RX offload
by setsockopt(). Check netdevice whether support NETIF_F_HW_TLS_TX or
not at the later stages in the whole tls_set_device_offload() process,
some memory allocations have been done before that. We must release those
memory and return error if we judge the netdevice not support
NETIF_F_HW_TLS_TX. It is redundant.
Move NETIF_F_HW_TLS_TX judgement forward, and move start_marker_record
and offload_ctx memory allocation back slightly. Thus, we can get
simpler exception handling process.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid using "goto" jump instruction unconditionally when we
can return directly. Remove unnecessary jump instructions in
do_tls_setsockopt_conf().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS recvmsg() passes user pages as destination for decrypt.
The decrypt operation is repeated record by record, each
record being 16kB, max. TLS allocates an sg_table and uses
iov_iter_get_pages() to populate it with enough pages to
fit the decrypted record.
Even though we decrypt a single message at a time we size
the sg_table based on the entire length of the iovec.
This leads to unnecessarily large allocations, risking
triggering OOM conditions.
Use iov_iter_truncate() / iov_iter_reexpand() to construct
a "capped" version of iov_iter_npages(). Alternatively we
could parametrize iov_iter_npages() to take the size as
arg instead of using i->count, or do something else..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is a followup to
commit ffef737fd0 ("net/tls: Fix skb memory leak when running kTLS traffic")
Which was missing another sk_defer_free_flush() call in
tls_sw_splice_read().
Fixes: f35f821935 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited Fixes commit introduced a memory leak when running kTLS
traffic (with/without hardware offloads).
I'm running nginx on the server side and wrk on the client side and get
the following:
unreferenced object 0xffff8881935e9b80 (size 224):
comm "softirq", pid 0, jiffies 4294903611 (age 43.204s)
hex dump (first 32 bytes):
80 9b d0 36 81 88 ff ff 00 00 00 00 00 00 00 00 ...6............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000efe2a999>] build_skb+0x1f/0x170
[<00000000ef521785>] mlx5e_skb_from_cqe_mpwrq_linear+0x2bc/0x610 [mlx5_core]
[<00000000945d0ffe>] mlx5e_handle_rx_cqe_mpwrq+0x264/0x9e0 [mlx5_core]
[<00000000cb675b06>] mlx5e_poll_rx_cq+0x3ad/0x17a0 [mlx5_core]
[<0000000018aac6a9>] mlx5e_napi_poll+0x28c/0x1b60 [mlx5_core]
[<000000001f3369d1>] __napi_poll+0x9f/0x560
[<00000000cfa11f72>] net_rx_action+0x357/0xa60
[<000000008653b8d7>] __do_softirq+0x282/0x94e
[<00000000644923c6>] __irq_exit_rcu+0x11f/0x170
[<00000000d4085f8f>] irq_exit_rcu+0xa/0x20
[<00000000d412fef4>] common_interrupt+0x7d/0xa0
[<00000000bfb0cebc>] asm_common_interrupt+0x1e/0x40
[<00000000d80d0890>] default_idle+0x53/0x70
[<00000000f2b9780e>] default_idle_call+0x8c/0xd0
[<00000000c7659e15>] do_idle+0x394/0x450
I'm not familiar with these areas of the code, but I've added this
sk_defer_free_flush() to tls_sw_recvmsg() based on a hunch and it
resolved the issue.
Fixes: f35f821935 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220102081253.9123-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Assigning crypto_info variables in advance can simplify the logic
of accessing value and move related local variables to a smaller
scope.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the TLS cipher suite uses CCM mode, including AES CCM and
SM4 CCM, the first byte of the B0 block is flags, and the real
IV starts from the second byte. The XOR operation of the IV and
rec_seq should be skip this byte, that is, add the iv_offset.
Fixes: f295b3ae9f ("net/tls: Add support of AES128-CCM based ciphers")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Vakul Garg <vakul.garg@nxp.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: David S. Miller <davem@davemloft.net>
We replace proto_ops whenever TLS is configured for RX. But our
replacement also overrides sendpage_locked, which will crash
unless TX is also configured. Similarly we plug both of those
in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely
different implementation for TX.
Last but not least we always plug in something based on inet_stream_ops
even though a few of the callbacks differ for IPv6 (getname, release,
bind).
Use a callback building method similar to what we do for struct proto.
Fixes: c46234ebb4 ("tls: RX path for ktls")
Fixes: d4ffb02dee ("net/tls: enable sk_msg redirect to tls socket egress")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
recvmsg() will put peek()ed and partially read records onto the rx_list.
splice_read() needs to consult that list otherwise it may miss data.
Align with recvmsg() and also put partially-read records onto rx_list.
tls_sw_advance_skb() is pretty pointless now and will be removed in
net-next.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't support splicing control records. TLS 1.3 changes moved
the record type check into the decrypt if(). The skb may already
be decrypted and still be an alert.
Note that decrypt_skb_update() is idempotent and updates ctx->decrypted
so the if() is pointless.
Reorder the check for decryption errors with the content type check
while touching them. This part is not really a bug, because if
decryption failed in TLS 1.3 content type will be DATA, and for
TLS 1.2 it will be correct. Nevertheless its strange to touch output
before checking if the function has failed.
Fixes: fedf201e12 ("net: tls: Refactor control message handling on recv")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_err contains a positive number, yet async_wait.err wants the
opposite. Fix the missed sign flip, which Jakub caught by inspection.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,
[kworker]
tls_encrypt_done(..., err=<negative error from crypto request>)
tls_err_abort(.., err)
sk->sk_err = err;
[task]
splice_from_pipe_feed
...
tls_sw_do_sendpage
if (sk->sk_err) {
ret = -sk->sk_err; // ret is positive
splice_from_pipe_feed (continued)
ret = actor(...) // ret is still positive and interpreted as bytes
// written, resulting in underflow of buf->len and
// sd->len, leading to huge buf->offset and bogus
// addresses computed in later calls to actor()
Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once.
Cc: stable@vger.kernel.org
Fixes: c46234ebb4 ("tls: RX path for ktls")
Reported-by: syzbot+b187b77c8474f9648fae@syzkaller.appspotmail.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The proto ops ->stream_memory_read() is currently only used
by TCP to check whether psock queue is empty or not. We need
to rename it before reusing it for non-TCP protocols, and
adjust the exsiting users accordingly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com
AES_CCM_128 and CHACHA20_POLY1305 are already supported by tls,
similar to setsockopt, getsockopt also needs to support these
two algorithms.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IV of CCM mode has special requirements, this patch supports CCM
mode of SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RFC8998 specification defines the use of the ShangMi algorithm
cipher suites in TLS 1.3, and also supports the GCM/CCM mode using
the SM4 algorithm.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We got multiple reports that multi_chunk_sendfile test
case from tls selftest fails. This was sort of expected,
as the original fix was never applied (see it in the first
Link:). The test in question uses sendfile() with count
larger than the size of the underlying file. This will
make splice set MSG_MORE on all sendpage calls, meaning
TLS will never close and flush the last partial record.
Eric seem to have addressed a similar problem in
commit 35f9c09fe9 ("tcp: tcp_sendpages() should call tcp_push() once")
by introducing MSG_SENDPAGE_NOTLAST. Unlike MSG_MORE
MSG_SENDPAGE_NOTLAST is not set on the last call
of a "pipefull" of data (PIPE_DEF_BUFFERS == 16,
so every 16 pages or whenever we run out of data).
Having a break every 16 pages should be fine, TLS
can pack exactly 4 pages into a record, so for
aligned reads there should be no difference,
unaligned may see one extra record per sendpage().
Sticking to TCP semantics seems preferable to modifying
splice, but we can revisit it if real life scenarios
show a regression.
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Link: https://lore.kernel.org/netdev/1591392508-14592-1-git-send-email-pooja.trivedi@stackpath.com/
Fixes: 3c4d755915 ("tls: kernel TLS support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a prerequisite patch, the next one is enabling recycling of
skbs and fragments. Add an extra argument on __skb_frag_unref() to
handle recycling, and update the current users of the function with that.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netdev with active TLS offload goes down, tls_device_down is
called to stop the offload and tear down the TLS context. However, the
socket stays alive, and it still points to the TLS context, which is now
deallocated. If a netdev goes up, while the connection is still active,
and the data flow resumes after a number of TCP retransmissions, it will
lead to a use-after-free of the TLS context.
This commit addresses this bug by keeping the context alive until its
normal destruction, and implements the necessary fallbacks, so that the
connection can resume in software (non-offloaded) kTLS mode.
On the TX side tls_sw_fallback is used to encrypt all packets. The RX
side already has all the necessary fallbacks, because receiving
non-decrypted packets is supported. The thing needed on the RX side is
to block resync requests, which are normally produced after receiving
non-decrypted packets.
The necessary synchronization is implemented for a graceful teardown:
first the fallbacks are deployed, then the driver resources are released
(it used to be possible to have a tls_dev_resync after tls_dev_del).
A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback
mode. It's used to skip the RX resync logic completely, as it becomes
useless, and some objects may be released (for example, resync_async,
which is allocated and freed by the driver).
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RCU synchronization is guaranteed to finish in finite time, unlike a
busy loop that polls a flag. This patch is a preparation for the bugfix
in the next patch, where the same synchronize_net() call will also be
used to sync with the TX datapath.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In tls_sw_splice_read, checkout MSG_* is inappropriate, should use
SPLICE_*, update tls_wait_data to accept nonblock arguments instead
of flags for recvmsg and splice.
Fixes: c46234ebb4 ("tls: RX path for ktls")
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function tls_sw_splice_read, before call tls_sw_advance_skb
it checks likely(!(flags & MSG_PEEK)), while MSG_PEEK is used
for recvmsg, splice supports SPLICE_F_NONBLOCK, SPLICE_F_MOVE,
SPLICE_F_MORE, should remove this checking.
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
record is being initialized to ctx->open_record but this is never
read as record is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
net/tls/tls_device.c:421:26: warning: Value stored to 'record' during
its initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although these two functions are only used by TCP, they are not
specific to TCP at all, both operate on skmsg and ingress_msg,
so fit in net/core/skmsg.c very well.
And we will need them for non-TCP, so rename and move them to
skmsg.c and export them to modules.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-13-xiyou.wangcong@gmail.com
s/beggining/beginning/
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compile-in the socket RX queue mapping field and logic when TLS_DEVICE
is enabled. This allows device drivers to pick the recorded socket's
RX queue and use it for streams distribution.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the tls_dev_event handler, ignore tlsdev_ops requirement for bond
interfaces, they do not exist as the interaction is done directly with
the lower device.
Also, make the validate function pass when it's called with the upper
bond interface.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not call the tls_dev_ops of upper devices. Instead, ask them
for the proper lowest device and communicate with it directly.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
proc_fs was used, in af_packet, without a surrounding #ifdef,
although there is no hard dependency on proc_fs.
That caused the initialization of the af_packet module to fail
when CONFIG_PROC_FS=n.
Specifically, proc_create_net() was used in af_packet.c,
and when it fails, packet_net_init() returns -ENOMEM.
It will always fail when the kernel is compiled without proc_fs,
because, proc_create_net() for example always returns NULL.
The calling order that starts in af_packet.c is as follows:
packet_init()
register_pernet_subsys()
register_pernet_operations()
__register_pernet_operations()
ops_init()
ops->init() (packet_net_ops.init=packet_net_init())
proc_create_net()
It worked in the past because register_pernet_subsys()'s return value
wasn't checked before this Commit 36096f2f4f ("packet: Fix error path in
packet_init.").
It always returned an error, but was not checked before, so everything
was working even when CONFIG_PROC_FS=n.
The fix here is simply to add the necessary #ifdef.
This also fixes a similar error in tls_proc.c, that was found by Jakub
Kicinski.
Fixes: d26b698dd3 ("net/tls: add skeleton of MIB statistics")
Fixes: 36096f2f4f ("packet: Fix error path in packet_init")
Signed-off-by: Yonatan Linik <yonatanlinik@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes made to remove AES constants started using protocol
aware salt_size. ctx->prot_info's salt_size is filled in tls sw case,
but not in tls offload mode, and was working so far because of the
hard coded value was used.
Fixes: 6942a284fb ("net/tls: make inline helpers protocol-aware")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Link: https://lore.kernel.org/r/20201201090752.27355-1-rohitm@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 7905 defines special behavior for ChaCha-Poly TLS sessions.
The differences are in the calculation of nonce and the absence
of explicit IV. This behavior is like TLSv1.3 partly.
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inline functions defined in tls.h have a lot of AES-specific
constants. Remove these constants and change argument to struct
tls_prot_info to have an access to cipher type in later patches
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.
This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case when tcp socket received FIN after some data and the
parser haven't started before reading data caller will receive
an empty buffer. This behavior differs from plain TCP socket and
leads to special treating in user-space.
The flow that triggers the race is simple. Server sends small
amount of data right after the connection is configured to use TLS
and closes the connection. In this case receiver sees TLS Handshake
data, configures TLS socket right after Change Cipher Spec record.
While the configuration is in process, TCP socket receives small
Application Data record, Encrypted Alert record and FIN packet. So
the TCP socket changes sk_shutdown to RCV_SHUTDOWN and sk_flag with
SK_DONE bit set. The received data is not parsed upon arrival and is
never sent to user-space.
Patch unpauses parser directly if we have unparsed data in tcp
receive queue.
Fixes: fcf4793e27 ("tls: check RCV_SHUTDOWN in tls_wait_data")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1605801588-12236-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In async_resync mode, we log the TCP seq of records until the async request
is completed. Later, in case one of the logged seqs matches the resync
request, we return it, together with its record serial number. Before this
fix, we mistakenly returned the serial number of the current record
instead.
Fixes: ed9b7646b0 ("net/tls: Add asynchronous resync")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If tcp socket has more data than Encrypted Handshake Message then
tls_sw_recvmsg will try to decrypt next record instead of returning
full control message to userspace as mentioned in comment. The next
message - usually Application Data - gets corrupted because it uses
zero copy for decryption that's why the data is not stored in skb
for next iteration. Revert check to not decrypt next record if
current is not Application Data.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Link: https://lore.kernel.org/r/1605413760-21153-1-git-send-email-vfedorenko@novek.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.
In both cases code was added on both sides in the same place
so just keep both.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace commas with semicolons. Commas introduce unnecessary
variability in the code structure and are hard to see. What is done
is essentially described by the following Coccinelle semantic patch
(http://coccinelle.lip6.fr/):
// <smpl>
@@ expression e1,e2; @@
e1
-,
+;
e2
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1602412498-32025-6-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At first when sendpage gets called, if there is more data, 'more' in
tls_push_data() gets set which later sets pending_open_record_frags, but
when there is no more data in file left, and last time tls_push_data()
gets called, pending_open_record_frags doesn't get reset. And later when
2 bytes of encrypted alert comes as sendmsg, it first checks for
pending_open_record_frags, and since this is set, it creates a record with
0 data bytes to encrypt, meaning record length is prepend_size + tag_size
only, which causes problem.
We should set/reset pending_open_record_frags based on more bit.
Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The
primary usecase is to use it in conjunction with TCP_REPAIR to
checkpoint/restore the TLS record layer state.
TLS connection state usually exists on the user space library. So
basically we can easily extract it from there, but when the TLS
connections are delegated to the kTLS, it is not the case. We need to
have a way to extract the TLS state from the kernel for both of TX and
RX side.
The new TLS_RX getsockopt copies the crypto_info to user in the same
way as TLS_TX does.
We have described use cases in our research work in Netdev 0x14
Transport Workshop [1].
Also, there is an TLS implementation called tlse [2] which supports
TLS connection migration. They have support of kTLS and their code
shows that they are expecting the future support of this option.
[1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain
[2] https://github.com/eduardsui/tlse
Signed-off-by: Yutaro Hayakawa <yhayakawa3720@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
