Commit 3b9fa0931d ("[PATCH] Kconfig i18n support") added this code,
and then commit ("kconfig: drop localization support") removed the
i18n support entirely.
Remove the left-over.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This helper is the same as the sample code in the NCURSES HOWTO [1],
but it is over-engineering to be used for nconf.
I do not see any good reason to use the 'float' type just for the
division by 2.
All the call-sites pass a non-NULL pointer to the first argument,
so 'if (win == NULL) win = stdscr;' is dead code.
'if (startx != 0) x = startx;' is dead code because 'x' will be
overridden some lines below, by 'x = startx + (int)temp;'.
All the call-sites pass a non-zero value to the second argument,
so 'if (starty != 0)' is always true.
getyx(win, y, x) is also dead-code because both 'y' and 'x' are
overridden.
All the call-sites pass 0 to the third parameter, so 'startx' can
be removed.
All the call-sites pass a non-zero value to the fourth parameter,
so 'if (width == 0) width = 80;' is dead code.
The window will be refreshed later, so there is no need to call
refresh() in this function.
Change the type of the last parameter from 'chtype' to 'int' to be
aligned with the prototype, 'int wattrset(WINDOW *win, int attrs);'
I also slightly cleaned up the indentation style.
[1]: https://tldp.org/HOWTO/NCURSES-Programming-HOWTO/color.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This attribute is not used because it will be overridden some lines
below:
wattrset(main_window, attr_main_menu_box);
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current attributes setup code is strange; the array attribute[]
is set to values outside the range of the attribute_t enum.
At least,
attributes_t attributes[ATTR_MAX+1] = {0};
... should be
int attribute[ATTR_MAX+1] = {0};
Also, there is no need to hard-code the color-pair numbers in
attributes_t.
The current code is messy. Rewrite it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The rootmenu always has a prompt even if the 'mainmenu' statement is
missing in the top Kconfig file.
conf_parse() calls menu_add_prompt(P_MENU, "Main menu", NULL) in this
case.
So, every 'menu' has a prompt.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 10175ba65f ("nconfig: Silence unused return values
from wattrset").
With this patch applied, recent GCC versions can cleanly build nconf
without "value computed is not used" warnings.
The wattrset() used to be implemented as a macro, like this:
#define wattrset(win,at) \
(NCURSES_OK_ADDR(win) \
? ((win)->_attrs = NCURSES_CAST(attr_t, at), \
OK) \
: ERR)
The GCC bugzilla [1] reported a false-positive -Wunused-value warning
in a similar test case. It was fixed by GCC 4.4.1.
Let's revert that commit, and see if somebody will claim the issue.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=39889
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The lower 8-bit of attributes should be 0, but this code wrongly
sets it to NORMAL (=1). The correct one is A_NORMAL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
snprintf() always terminates the destination buffer with '\0' even if
the buffer is not long enough. (In this case, the last element of the
buffer becomes '\0'.)
The explicit termination is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the .config file is missing, 'make config', 'make menuconfig', etc.
uses a file listed in DEFCONFIG_LIST, if found, as base configuration.
Ususally, /boot/config-$(uname -r) exists, and is used as default.
However, when you are cross-compiling the kernel, it does not make
sense to use /boot/config-* on the build host. It should default to
arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
UML previously did not use DEFCONFIG_LIST at all, but it should be
able to use arch/um/configs/$(KBUILD_DEFCONFIG) as a base config file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
sym_change_count has no good reason to be 'int' type.
sym_set_change_count() compares the old and new values after casting
both of them to (bool). I do not see any practical diffrence between
sym_set_change_count(1) and sym_add_change_count(1).
Use the boolean flag, conf_changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The following code in get_mext_match():
index = (index + items_num) % items_num;
... makes the program crash when items_num is zero (that is, the menu
is empty).
A menu can be empty when all the options in it are hidden by unmet
'depends on'.
For example,
menu "This menu will be empty"
config FOO
bool "foo"
depends on BROKEN
endmenu
If you visit this menu and press a '/' key and then another key, nconf
crashes with:
Floating point exception (core dumped)
When the number of items is zero, it does not make sense to search in
the menu. In this case, current_item() returns NULL, and item_index()
ERR, but get_mext_match() does not check it.
Let's make get_mext_match() just return if the menu is empty.
While I am here, change items_num from 'int' to 'unsigned int' because
it should never become negative.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
fixed the following coccicheck:
./scripts/kconfig/confdata.c:36:9-10: WARNING: return of 0/1 in function
'is_dir' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now "modules" is the only member of the "option" property.
Remove "option", and move "modules" to the top level property.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
allnoconfig_y is an ugly hack that sets a symbol to 'y' by allnoconfig.
allnoconfig does not mean a minimal set of CONFIG options because a
bunch of prompts are hidden by 'if EMBEDDED' or 'if EXPERT', but I do
not like to hack Kconfig this way.
Use the pre-existing feature, KCONFIG_ALLCONFIG, to provide a one
liner config fragment. CONFIG_EMBEDDED=y is still forced when
allnoconfig is invoked as a part of tinyconfig.
No change in the .config file produced by 'make tinyconfig'.
The output of 'make allnoconfig' will be changed; we will get
CONFIG_EMBEDDED=n because allnoconfig literally sets all symbols to n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a partial revert of commit 2a86f66121 ("kbuild: use
KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST").
Now that the reference to $(DEFCONFIG_LIST) was removed from
init/Kconfig, the default KBUILD_DEFCONFIG can go back home.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
"defconfig_list" is a weird option that defines a static symbol that
declares the list of base config files in case the .config does not
exist yet.
This is quite different from other normal symbols; we just abused the
"string" type and the "default" properties to list out the input files.
They must be fixed values since these are searched for and loaded in
the parse stage.
It is an ugly hack, and should not exist in the first place. Providing
this feature as an environment variable is a saner approach.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This function is only used in conf.c. Move it there together with the
randomize_choice_values() helper.
Define 'enum conf_def_mode' locally in conf.c as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current option parse code is clumsy.
The 's' option is separately handled in an if-conditional due to the
following code:
input_mode = (enum input_mode)opt;
If 's' is moved to the switch statement, the invalid value 's' would
be assigned to the input_mode.
Another potential problem is that we are mixing 'enum input_mode' and
ASCII characters. They could overwrap if we add more input modes.
To separate them out, set the flag field of long options to a pointer
of input_mode_opt. For mode select options, getopt_long() returns 0,
which never causes overwrap with ASCII characters that represent short
options.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This code is too big to be placed in the switch statement.
Move the code into a new helper function. I slightly refactor the code
without changing the behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ld-version.sh checks the output from $(LD) --version, but it has a
problem on some locales.
For example, in Italian:
$ LC_MESSAGES=it_IT.UTF-8 ld --version | head -n 1
ld di GNU (GNU Binutils for Debian) 2.35.2
This makes ld-version.sh fail because it expects "GNU ld" for the
BFD linker case.
Add LC_ALL=C to override the user's locale.
BTW, setting LC_MESSAGES=C (or LANG=C) is not enough because it is
ineffective if LC_ALL is set on the user's environment.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212105
Reported-by: Marco Scardovi
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Recensito-da: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This is a remnant of commit 78046fabe6 ("kbuild: determine the output
format of DTC by the target suffix").
The parameter "yaml" is meaningless because cmd_dtc no loner takes $(2).
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This piece of code converts the target suffix to the dtc -O option:
*.dtb -> -O dtb
*.dt.yaml -> -O yaml
Commit ce88c9c794 ("kbuild: Add support to build overlays (%.dtbo)")
added the third case:
*.dtbo -> -O dtbo
This works thanks to commit 163f0469bf2e ("dtc: Allow overlays to have
.dtbo extension") in the upstream DTC, which has already been pulled in
the kernel.
However, I think it is a bit odd because "dtbo" is not a format name.
At least, it does not show up in the help message of dtc.
$ scripts/dtc/dtc --help
[ snip ]
-O, --out-format <arg>
Output formats are:
dts - device tree source text
dtb - device tree blob
yaml - device tree encoded as YAML
asm - assembler source
So, I am not a big fan of the second hunk of that change:
} else if (streq(outform, "dtbo")) {
dt_to_blob(outf, dti, outversion);
Anyway, we did not need to do this in Makefile in the first place.
guess_type_by_name() had already understood ".yaml" before commit
4f0e3a57d6 ("kbuild: Add support for DT binding schema checks"),
and now does ".dtbo" as well.
Makefile does not need to duplicate the same logic. Let's leave it
to dtc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Commit aec6c60a01 ("kbuild: check the minimum compiler version in
Kconfig") changed how the script detects the compiler version.
Get 'make CROSS_COMPILE=scripts/dummy-tools/' back working again.
Fixes: aec6c60a01 ("kbuild: check the minimum compiler version in Kconfig")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
ppc64le checks for -mprofile-kernel to define MPROFILE_KERNEL Kconfig.
Kconfig calls arch/powerpc/tools/gcc-check-mprofile-kernel.sh for that
purpose. This script performs two checks:
1) build with -mprofile-kernel should contain "_mcount"
2) build with -mprofile-kernel with a function marked as "notrace"
should not produce "_mcount"
So support this in dummy-tools' gcc, so that we have MPROFILE_KERNEL
always true.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus reported a build error due to the GCC plugin incompatibility
when the compiler is upgraded. [1]
GCC plugins are tied to a particular GCC version. So, they must be
rebuilt when the compiler is upgraded.
This seems to be a long-standing flaw since the initial support of
GCC plugins.
Extend commit 8b59cd81dc ("kbuild: ensure full rebuild when the
compiler is updated"), so that GCC plugins are covered by the
compiler upgrade detection.
[1]: https://lore.kernel.org/lkml/CAHk-=wieoN5ttOy7SnsGwZv+Fni3R6m-Ut=oxih6bbZ28G+4dw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
If LLD was built with -DLLD_VENDOR="xyz", ld.lld --version output
will prefix LLD_VENDOR. Since LLD_VENDOR can contain spaces, the
LLD identifier isn't guaranteed to be $2 either.
Adjust the version checker to handle such versions of lld.
Link: https://lore.kernel.org/lkml/20210302221211.1620858-1-bero@lindev.ch/
Signed-off-by: Bernhard Rosenkränzer <bero@lindev.ch>
[masahiro yamada: refactor the code]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
There is a test in Kconfig which takes inverted value of a compiler
check:
* config CC_HAS_INT128
def_bool !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0)
This results in CC_HAS_INT128 not being in super-config generated by
dummy-tools. So take this into account in the gcc script.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix coding style issues (Jason Yan)
-----BEGIN PGP SIGNATURE-----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=oow8
-----END PGP SIGNATURE-----
Merge tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull gcc-plugins fixes from Kees Cook:
"Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
been reported a couple times now by static analyzers, so best to get
them fixed to reduce the noise. :)
- Fix coding style issues (Jason Yan)"
* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: remove unneeded semicolon
gcc-plugins: structleak: remove unneeded variable 'ret'
On little endian system, Use aarch64_be(gcc v7.3) downloaded from
linaro.org to build image with CONFIG_CPU_BIG_ENDIAN = y,
CONFIG_FTRACE = y, CONFIG_DYNAMIC_FTRACE = y.
gcc will create symbols of _mcount but recordmcount can not create
mcount_loc for *.o.
aarch64_be-linux-gnu-objdump -r fs/namei.o | grep mcount
00000000000000d0 R_AARCH64_CALL26 _mcount
...
0000000000007190 R_AARCH64_CALL26 _mcount
The reason is than funciton arm64_is_fake_mcount can not work correctly.
A symbol of _mcount in *.o compiled with big endian compiler likes:
00 00 00 2d 00 00 01 1b
w(rp->r_info) will return 0x2d instead of 0x011b. Because w() takes
uint32_t as parameter, which truncates rp->r_info.
Use w8() instead w() to read relp->r_info
Link: https://lkml.kernel.org/r/20210222135840.56250-1-chenjun102@huawei.com
Fixes: ea0eada456 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.")
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix the following coccicheck warning:
scripts/gcc-plugins/latent_entropy_plugin.c:539:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200418070521.10931-1-yanaijie@huawei.com
Fix the following coccicheck warning:
scripts/gcc-plugins/structleak_plugin.c:177:14-17: Unneeded variable:
"ret". Return "0" on line 207
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200418070505.10715-1-yanaijie@huawei.com
Commit cd195bc477 ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.
This script no longer needs to include include/config/auto.conf.
Fixes: cd195bc477 ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit fbe078d397 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.
So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.
I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.
Fixes: fbe078d397 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Some randconfig builds fail with undefined references to _mcount
when CONFIG_TRIM_UNUSED_KSYMS is set:
ERROR: modpost: "_mcount" [drivers/tee/optee/optee.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fsi/fsi-occ.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fpga/dfl-pci.ko] undefined!
Since there is already a list of symbols that get generated at link
time, add this one as well.
Fixes: fbe078d397 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmA5Qu8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yiz0H/jTF+JcYstvGINx7jLZH4j9Pa4b/IZ3RO5uR
OpjkzhTNangk2pSS4nuoQGjDRz1miBRaY1yE923Wxk1T1Nk+DA6aYJbVTqpn962S
Z5IyQWzMIHFTAhSle0GeuTBk9Qx46ONhBJH1qsHCraAUtsQrxSUoF95ZftKD54gz
Eg+eFQscHen9on2ZlqypauZebVbAa3zq1JCyohK5URiXLXpNq7ASCcOZ6v1OJb76
thgxOQgb1/TQ+ZNEeRs8Bv5g6kcTlWhapIrnsYPrmCEYaj2ghvGbbSlWyAmJRPqT
PH+ucFCyjZqGcPmM5zerhVI+scQOLAJigAQa/B6HhRfmCyI1kkE=
=ZKHc
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes, nothing all that
notable"
* tag 'docs-5.12-2' of git://git.lwn.net/linux:
docs: proc.rst: fix indentation warning
Documentation: cgroup-v2: fix path to example BPF program
docs: powerpc: Fix tables in syscall64-abi.rst
Documentation: features: refresh feature list
Documentation: features: remove c6x references
docs: ABI: testing: ima_policy: Fixed missing bracket
Fix unaesthetic indentation
scripts: kernel-doc: fix array element capture in pointer-to-func parsing
doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
Documentation: proc.rst: add more about the 6 fields in loadavg
Since GCC 8.0 -fsanitize=signed-integer-overflow doesn't work with
-fwrapv. -fwrapv makes signed overflows defines and GCC essentially
disables ubsan checks. On GCC < 8.0 -fwrapv doesn't have influence on
-fsanitize=signed-integer-overflow setting, so it kinda works but
generates false-positves and violates uaccess rules:
lib/iov_iter.o: warning: objtool: iovec_from_user()+0x22d: call to
__ubsan_handle_add_overflow() with UACCESS enabled
Disable signed overflow checks to avoid these problems. Remove unsigned
overflow checks as well. Unsigned overflow appeared as side effect of
commit cdf8a76fda ("ubsan: move cc-option tests into Kconfig"), but it
never worked (kernel doesn't boot). And unsigned overflows are allowed by
C standard, so it just pointless.
Link: https://lkml.kernel.org/r/20210209232348.20510-1-ryabinin.a.a@gmail.com
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the list is uninitialized (next pointer is NULL), list_for_each gets
stuck in an infinite loop. Print a message and treat list as empty.
Link: https://lkml.kernel.org/r/4ae23bb1-c333-f669-da2d-fa35c4f49018@amazon.com
Signed-off-by: George Prekas <prekageo@amazon.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
