Some back and forth with Drew [1] about riscv_fill_hwcap() resulted in
the realisation that it is not very useful to parse the DT & perform
validation of riscv,isa every time we would like to get the id for a
hart.
Although it is no longer called in riscv_fill_hwcap(),
riscv_of_processor_hartid() is called in several other places.
Notably in setup_smp() it forms part of the logic for filling the mask
of possible CPUs. Since a possible CPU must have passed this basic
validation of riscv,isa, a repeat validation is not required.
Rename riscv_of_processor_id() to riscv_early_of_processor_id(),
which will be called from setup_smp() & introduce a new
riscv_of_processor_id() which makes use of the pre-populated mask of
possible cpus.
Link: https://lore.kernel.org/linux-riscv/xvdswl3iyikwvamny7ikrxo2ncuixshtg3f6uucjahpe3xpc5c@ud4cz4fkg5dj/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://lore.kernel.org/r/20230607-glade-pastel-d8cbd9d9f3c6@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Svnapot extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Evan Green <evan@rivosinc.com> says:
This change detects the presence of Zba, Zbb, and Zbs extensions and exports
them per-hart to userspace via the hwprobe mechanism. Glibc can then use
these in setting up hwcaps-based library search paths.
There's a little bit of extra housekeeping here: the first change adds
Zba and Zbs to the set of extensions the kernel recognizes, and the second
change starts tracking ISA features per-hart (in addition to the ANDed
mask of features across all harts which the kernel uses to make
decisions). Now that we track the ISA information per-hart, we could
even fix up /proc/cpuinfo to accurately report extension per-hart,
though I've left that out of this series for now.
* b4-shazam-merge:
RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
RISC-V: Track ISA extensions per hart
RISC-V: Add Zba, Zbs extension probing
Link: https://lore.kernel.org/r/20230509182504.2997252-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sparse is giving a warning about vcpu_sbi_ext_pmu not being
defined, so add a definition to the relevant header to fix
the following:
arch/riscv/kvm/vcpu_sbi_pmu.c:81:37: warning: symbol 'vcpu_sbi_ext_pmu' was not declared. Should it be static?
Fixes: cbddc4c4cb ("RISC-V: KVM: Add SBI PMU extension support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We expose IMSIC registers as KVM device attributes of the in-kernel
AIA irqchip device. This will allow KVM user-space to save/restore
IMISC state of each VCPU using KVM device ioctls().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We can have AIA IMSIC support for both HS-level and VS-level but
the VS-level IMSICs are optional. We use the VS-level IMSICs for
Guest/VM whenever available otherwise we fallback to software
emulation of AIA IMSIC.
This patch adds in-kernel virtualization of AIA IMSIC.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add two new bits to the IMA_EXT_0 key for ZBA, ZBB, and ZBS extensions.
These are accurately reported per CPU.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230509182504.2997252-4-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The kernel maintains a mask of ISA extensions ANDed together across all
harts. Let's also keep a bitmap of ISA extensions for each CPU. Although
the kernel is currently unlikely to enable a feature that exists only on
some CPUs, we want the ability to report asymmetric CPU extensions
accurately to usermode.
Note that riscv_fill_hwcaps() runs before the per_cpu_offsets are built,
which is why I've used a [NR_CPUS] array rather than per_cpu() data.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230509182504.2997252-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add the Zba address bit manipulation extension and Zbs single bit
instructions extension into those the kernel is aware of and maintains
in its riscv_isa bitmap.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230509182504.2997252-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We expose APLIC registers as KVM device attributes of the in-kernel
AIA irqchip device. This will allow KVM user-space to save/restore
APLIC state using KVM device ioctls().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
There is no virtualization support in AIA APLIC so we add in-kernel
emulation of AIA APLIC which only supports MSI-mode (i.e. wired
interrupts forwarded to AIA IMSIC as MSIs).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We implement KVM device interface for in-kernel AIA irqchip so that
user-space can use KVM device ioctls to create, configure, and destroy
in-kernel AIA irqchip.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
To incrementally implement in-kernel AIA irqchip support, we first
add minimal skeletal support which only compiles but does not provide
any functionality.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We add APLIC related defines in a separate header so that different
parts of KVM code can share it. Once AIA drivers are merged will
have a common APLIC header shared by both KVM and IRQCHIP driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We add IMSIC related defines in a separate header so that different
parts of KVM code can share it. Once AIA drivers are merged will
have a common IMSIC header shared by both KVM and IRQCHIP driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The RISC-V host will have one guest external interrupt line for each
VS-level IMSICs associated with a HART. The guest external interrupt
lines are per-HART resources and hypervisor can use HGEIE, HGEIP, and
HIE CSRs to manage these guest external interrupt lines.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
extable relies on the MMU to work properly, so it's useless to
include __ex_table sections and build extable related functions for
!MMU case.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230509152641.805-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The init/main.c file contains some extern declarations for functions
defined in architecture code, and it defines some other functions that are
called from architecture code with a custom prototype. Both of those
result in warnings with 'make W=1':
init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
init/main.c:790:20: error: no previous prototype for 'mem_encrypt_init' [-Werror=missing-prototypes]
init/main.c:792:20: error: no previous prototype for 'poking_init' [-Werror=missing-prototypes]
arch/arm64/kernel/irq.c:122:13: error: no previous prototype for 'init_IRQ' [-Werror=missing-prototypes]
arch/arm64/kernel/time.c:55:13: error: no previous prototype for 'time_init' [-Werror=missing-prototypes]
arch/x86/kernel/process.c:935:13: error: no previous prototype for 'arch_post_acpi_subsys_init' [-Werror=missing-prototypes]
init/calibrate.c:261:37: error: no previous prototype for 'calibrate_delay_is_known' [-Werror=missing-prototypes]
kernel/fork.c:991:20: error: no previous prototype for 'arch_task_cache_init' [-Werror=missing-prototypes]
Add prototypes for all of these in include/linux/init.h or another
appropriate header, and remove the duplicate declarations from
architecture specific code.
[sfr@canb.auug.org.au: declare time_init_early()]
Link: https://lkml.kernel.org/r/20230519124311.5167221c@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230517131102.934196-12-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andy Chiu <andy.chiu@sifive.com> says:
This is the v21 patch series for adding Vector extension support in
Linux. Please refer to [1] for the introduction of the patchset. The
v21 patch series was aimed to solve build issues from v19, provide usage
guideline for the prctl interface, and address review comments on v20.
Thank every one who has been reviewing, suggesting on the topic. Hope
this get a step closer to the final merge.
* b4-shazam-merge: (27 commits)
selftests: add .gitignore file for RISC-V hwprobe
selftests: Test RISC-V Vector prctl interface
riscv: Add documentation for Vector
riscv: Enable Vector code to be built
riscv: detect assembler support for .option arch
riscv: Add sysctl to set the default vector rule for new processes
riscv: Add prctl controls for userspace vector management
riscv: hwcap: change ELF_HWCAP to a function
riscv: KVM: Add vector lazy save/restore support
riscv: kvm: Add V extension to KVM ISA
riscv: prevent stack corruption by reserving task_pt_regs(p) early
riscv: signal: validate altstack to reflect Vector
riscv: signal: Report signal frame size to userspace via auxv
riscv: signal: Add sigcontext save/restore for vector
riscv: signal: check fp-reserved words unconditionally
riscv: Add ptrace vector support
riscv: Allocate user's vector context in the first-use trap
riscv: Add task switch support for vector
riscv: Introduce struct/helpers to save/restore per-task Vector state
riscv: Introduce riscv_v_vsize to record size of Vector context
...
Link: https://lore.kernel.org/r/20230605110724.21391-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch add two riscv-specific prctls, to allow usespace control the
use of vector unit:
* PR_RISCV_V_SET_CONTROL: control the permission to use Vector at next,
or all following execve for a thread. Turning off a thread's Vector
live is not possible since libraries may have registered ifunc that
may execute Vector instructions.
* PR_RISCV_V_GET_CONTROL: get the same permission setting for the
current thread, and the setting for following execve(s).
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Link: https://lore.kernel.org/r/20230605110724.21391-22-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Using a function is flexible to represent ELF_HWCAP. So the kernel may
encode hwcap reflecting supported hardware features just at the moment of
the start of each program.
This will be helpful when we introduce prctl/sysctl interface to control
per-process availability of Vector extension in following patches.
Programs started with V disabled should see V masked off in theirs
ELF_HWCAP.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-21-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds vector context save/restore for guest VCPUs. To reduce the
impact on KVM performance, the implementation imitates the FP context
switch mechanism to lazily store and restore the vector context only when
the kernel enters/exits the in-kernel run loop and not during the KVM
world switch.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230605110724.21391-20-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add V extension to KVM isa extension list to enable supporting of V
extension on VCPUs.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-19-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The vector register belongs to the signal context. They need to be stored
and restored as entering and leaving the signal handler. According to the
V-extension specification, the maximum length of the vector registers can
be 2^16. Hence, if userspace refers to the MINSIGSTKSZ to create a
sigframe, it may not be enough. To resolve this problem, this patch refers
to the commit 94b07c1f8c
("arm64: signal: Report signal frame size to userspace via auxv") to enable
userspace to know the minimum required sigframe size through the auxiliary
vector and use it to allocate enough memory for signal context.
Note that auxv always reports size of the sigframe as if V exists for
all starting processes, whenever the kernel has CONFIG_RISCV_ISA_V. The
reason is that users usually reference this value to allocate an
alternative signal stack, and the user may use V anytime. So the user
must reserve a space for V-context in sigframe in case that the signal
handler invokes after the kernel allocating V.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-16-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch facilitates the existing fp-reserved words for placement of
the first extension's context header on the user's sigframe. A context
header consists of a distinct magic word and the size, including the
header itself, of an extension on the stack. Then, the frame is followed
by the context of that extension, and then a header + context body for
another extension if exists. If there is no more extension to come, then
the frame must be ended with a null context header. A special case is
rv64gc, where the kernel support no extensions requiring to expose
additional regfile to the user. In such case the kernel would place the
null context header right after the first reserved word of
__riscv_q_ext_state when saving sigframe. And the kernel would check if
all reserved words are zeros when a signal handler returns.
__riscv_q_ext_state---->| |<-__riscv_extra_ext_header
~ ~
.reserved[0]--->|0 |<- .reserved
<-------|magic |<- .hdr
| |size |_______ end of sc_fpregs
| |ext-bdy|
| ~ ~
+)size ------->|magic |<- another context header
|size |
|ext-bdy|
~ ~
|magic:0|<- null context header
|size:0 |
The vector registers will be saved in datap pointer. The datap pointer
will be allocated dynamically when the task needs in kernel space. On
the other hand, datap pointer on the sigframe will be set right after
the __riscv_v_ext_state data structure.
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Suggested-by: Vineet Gupta <vineetg@rivosinc.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230605110724.21391-15-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds ptrace support for riscv vector. The vector registers will
be saved in datap pointer of __riscv_v_ext_state. This pointer will be set
right after the __riscv_v_ext_state data structure then it will be put in
ubuf for ptrace system call to get or set. It will check if the datap got
from ubuf is set to the correct address or not when the ptrace system call
is trying to set the vector registers.
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-13-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Vector unit is disabled by default for all user processes. Thus, a
process will take a trap (illegal instruction) into kernel at the first
time when it uses Vector. Only after then, the kernel allocates V
context and starts take care of the context for that user process.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/3923eeee-e4dc-0911-40bf-84c34aee962d@linaro.org
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-12-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add vector state context struct to be added later in thread_struct. And
prepare low-level helper functions to save/restore vector contexts.
This include Vector Regfile and CSRs holding dynamic configuration state
(vstart, vl, vtype, vcsr). The Vec Register width could be implementation
defined, but same for all processes, so that is saved separately.
This is not yet wired into final thread_struct - will be done when
__switch_to actually starts doing this in later patches.
Given the variable (and potentially large) size of regfile, they are
saved in dynamically allocated memory, pointed to by datap pointer in
__riscv_v_ext_state.
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-10-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch is used to detect the size of CPU vector registers and use
riscv_v_vsize to save the size of all the vector registers. It assumes all
harts has the same capabilities in a SMP system. If a core detects VLENB
that is different from the boot core, then it warns and turns off V
support for user space.
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-9-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These are small and likely to be frequently called so implement as
inline routines (vs. function call).
Co-developed-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-8-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Probing kernel support for Vector extension is available now. This only
add detection for V only. Extenions like Zvfh, Zk are not in this scope.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230605110724.21391-4-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The name of __switch_to_aux() is not clear and rename it with the
determine function: __switch_to_fpu(). Next we could add other regs'
switch.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230605110724.21391-2-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 8aeb7b17f0 ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
allows riscv to use mmap with PROT_WRITE only, and meanwhile mmap with w+x
is also permitted. However, when userspace tries to access this page with
PROT_WRITE|PROT_EXEC, which causes infinite loop at load page fault as
well as it triggers soft lockup. According to riscv privileged spec,
"Writable pages must also be marked readable". The fix to drop the
`PAGE_COPY_READ_EXEC` and then `PAGE_COPY_EXEC` would be just used instead.
This aligns the other arches (i.e arm64) for protection_map.
Fixes: 8aeb7b17f0 ("RISC-V: Make mmap() with PROT_WRITE imply PROT_READ")
Signed-off-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230425102828.1616812-1-woodrow.shen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Rather than defaulting the status to available and allowing the user
to set availability, default to uninitialized and only allow the user
to set the status to unavailable. Then, when an extension is first
used, ensure it is available by invoking its probe function, if it
has one (an extension is assumed available if it doesn't have a probe
function). Checking the status in kvm_vcpu_sbi_find_ext() ensures
extension functions cannot be invoked when they're unavailable.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Change the boolean extension_disabled[] array to an array of enums,
ext_status[]. For now, the enum only has two states, which correspond
to the previous boolean states, so this patch has no intended
functional change. The next patch will add another state, expanding
the purpose of ext_status[].
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
The M-mode redirects an unhandled misaligned trap back
to S-mode when not delegating it to VS-mode(hedeleg).
However, KVM running in HS-mode terminates the VS-mode
software when back from M-mode.
The KVM should redirect the trap back to VS-mode, and
let VS-mode trap handler decide the next step.
Here is a way to handle misaligned traps in KVM,
not only directing them to VS-mode or terminate it.
Signed-off-by: wchen <waylingII@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Most architectures define the atomic/atomic64 xchg and cmpxchg
operations in terms of arch_xchg and arch_cmpxchg respectfully.
Add fallbacks for these cases and remove the trivial cases from arch
code. On some architectures the existing definitions are kept as these
are used to build other arch_atomic*() operations.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230605070124.3741859-5-mark.rutland@arm.com
huge_ptep_get must be reimplemented in order to go through all the PTEs
of a NAPOT region: this is needed because the HW can update the A/D bits
of any of the PTE that constitutes the NAPOT region.
Fixes: 82a1a1f3bf ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230428120120.21620-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For RISC-V, when tracing with tracepoint events, the IP and status are
set to 0, preventing the perf code parsing the callchain and resolving
the symbols correctly.
./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }'
@:
{ <STACKID4294967282> }: 1
The fix is to implement perf_arch_fetch_caller_regs for riscv, which
fills several necessary registers used for callchain unwinding,
including epc, sp, s0 and status. It's similar to commit b3eac0265b
("arm: perf: Fix callchain parse error with kernel tracepoint events")
and commit 5b09a094f2 ("arm64: perf: Fix callchain parse error with
kernel tracepoint events").
With this patch, callchain can be parsed correctly as:
./ply 'tracepoint:kmem/kmem_cache_alloc { @[stack]=count(); }'
@:
{
__traceiter_kmem_cache_alloc+68
__traceiter_kmem_cache_alloc+68
kmem_cache_alloc+354
__sigqueue_alloc+94
__send_signal_locked+646
send_signal_locked+154
do_send_sig_info+84
__kill_pgrp_info+130
kill_pgrp+60
isig+150
n_tty_receive_signal_char+36
n_tty_receive_buf_standard+2214
n_tty_receive_buf_common+280
n_tty_receive_buf2+26
tty_ldisc_receive_buf+34
tty_port_default_receive_buf+62
flush_to_ldisc+158
process_one_work+458
worker_thread+138
kthread+178
riscv_cpufeature_patch_func+832
}: 1
Signed-off-by: Ism Hong <ism.hong@gmail.com>
Link: https://lore.kernel.org/r/20230601095355.1168910-1-ism.hong@gmail.com
Fixes: 178e9fc47a ("perf: riscv: preliminary RISC-V support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable SMP boot on ACPI based platforms by using the RINTC
structures in the MADT table.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-13-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RHCT is a new table defined for RISC-V to communicate the
features of the CPU to the OS. Create a new architecture folder
in drivers/acpi and add RHCT parsing code.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-11-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RINTC structures in the MADT provide mapping between the hartid
and the CPU. This is required many times even at run time like
cpuinfo. So, instead of parsing the ACPI table every time, cache
the RINTC structures and provide a function to get the correct
RINTC structure for a given cpu.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-10-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
processor_core needs arch-specific functions to map the ACPI ID
to the physical ID. In RISC-V platforms, hartid is the physical id
and RINTC structure in MADT provides this mapping. Add arch-specific
function to get this mapping from RINTC.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-8-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable ACPI core for RISC-V after adding architecture-specific
interfaces and header files required to build the ACPI core.
1) Couple of header files are required unconditionally by the ACPI
core. Add empty acenv.h and cpu.h header files.
2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
be provided by the architecture. Define dummy interfaces for now
so that build succeeds. Actual implementation will be added when
PCI support is added for ACPI along with external interrupt
controller support.
3) A few globals and memory mapping related functions specific
to the architecture need to be provided.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230515054928.2079268-7-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code.
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation.
- Misc cleanups/fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mM0A
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Introduce local{,64}_try_cmpxchg() - a slightly more optimal
primitive, which will be used in perf events ring-buffer code
- Simplify/modify rwsems on PREEMPT_RT, to address writer starvation
- Misc cleanups/fixes
* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: Correct (cmp)xchg() instrumentation
locking/x86: Define arch_try_cmpxchg_local()
locking/arch: Wire up local_try_cmpxchg()
locking/generic: Wire up local{,64}_try_cmpxchg()
locking/atomic: Add generic try_cmpxchg{,64}_local() support
locking/rwbase: Mitigate indefinite writer starvation
locking/arch: Rename all internal __xchg() names to __arch_xchg()
* Support for hibernation.
* .rela.dyn has been moved to init.
* A fix for the SBI probing to allow for implementation-defined
behavior.
* Various other fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=xoqj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for hibernation
- The .rela.dyn section has been moved to the init area
- A fix for the SBI probing to allow for implementation-defined
behavior
- Various other fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: include cpufeature.h in cpufeature.c
riscv: Move .rela.dyn to the init sections
dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
riscv: compat_syscall_table: Fixup compile warning
RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
RISC-V: fix sifive and thead section mismatches in errata
RISC-V: Align SBI probe implementation with spec
riscv: mm: remove redundant parameter of create_fdt_early_page_table
riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e415 ("RISC-V: Add basic support for SBI v0.2")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sia Jee Heng <jeeheng.sia@starfivetech.com> says:
This series adds RISC-V Hibernation/suspend to disk support.
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start to
restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
At high-level, this series includes the following changes:
1) Change suspend_save_csrs() and suspend_restore_csrs()
to public function as these functions are common to
suspend/hibernation. (patch 1)
2) Refactor the common code in the __cpu_resume_enter() function and
__hibernate_cpu_resume() function. The common code are used by
hibernation and suspend. (patch 2)
3) Enhance kernel_page_present() function to support huge page. (patch 3)
4) Add arch/riscv low level functions to support
hibernation/suspend to disk. (patch 4)
* b4-shazam-merge:
RISC-V: Add arch functions to support hibernation/suspend-to-disk
RISC-V: mm: Enable huge page support to kernel_page_present() function
RISC-V: Factor out common code of __cpu_resume_enter()
RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function
Link: https://lore.kernel.org/r/20230330064321.1008373-1-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Low level Arch functions were created to support hibernation.
swsusp_arch_suspend() relies code from __cpu_suspend_enter() to write
cpu state onto the stack, then calling swsusp_save() to save the memory
image.
Arch specific hibernation header is implemented and is utilized by the
arch_hibernation_header_restore() and arch_hibernation_header_save()
functions. The arch specific hibernation header consists of satp, hartid,
and the cpu_resume address. The kernel built version is also need to be
saved into the hibernation image header to making sure only the same
kernel is restore when resume.
swsusp_arch_resume() creates a temporary page table that covering only
the linear map. It copies the restore code to a 'safe' page, then start
to restore the memory image. Once completed, it restores the original
kernel's page table. It then calls into __hibernate_cpu_resume()
to restore the CPU context. Finally, it follows the normal hibernation
path back to the hibernation core.
To enable hibernation/suspend to disk into RISCV, the below config
need to be enabled:
- CONFIG_HIBERNATION
- CONFIG_ARCH_HIBERNATION_HEADER
- CONFIG_ARCH_HIBERNATION_POSSIBLE
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-5-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The cpu_resume() function is very similar for the suspend to disk and
suspend to ram cases. Factor out the common code into suspend_restore_csrs
macro and suspend_restore_regs macro.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-3-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently suspend_save_csrs() and suspend_restore_csrs() functions are
statically defined in the suspend.c. Change the function's attribute
to public so that the functions can be used by hibernation as well.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-2-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Decrease the probability of this internal facility to be used by
driver code.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [riscv]
Link: https://lore.kernel.org/r/20230118154450.73842-1-andrzej.hajda@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
* Support for runtime detection of the Svnapot extension.
* Support for Zicboz when clearing pages.
* We've moved to GENERIC_ENTRY.
* Support for !MMU on rv32 systems.
* The linear region is now mapped via huge pages.
* Support for building relocatable kernels.
* Support for the hwprobe interface.
* Various fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=oxQd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
probe_vendor_features() is now called from smp_callin(), which is not
__init code and runs during cpu hotplug events. Remove the
__init_or_module decoration from it and the functions it calls to avoid
walking into outer space.
Fixes: 62a31d6e38 ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230420194934.1871356-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working
from the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity adjusted
correctly.
- Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code
-----BEGIN PGP SIGNATURE-----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=EWF0
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt updates from Thomas Gleixner:
"Core:
- Add tracepoints for tasklet callbacks which makes it possible to
analyze individual tasklet functions instead of guess working from
the overall duration of tasklet processing
- Ensure that secondary interrupt threads have their affinity
adjusted correctly
Drivers:
- A large rework of the RISC-V IPI management to prepare for a new
RISC-V interrupt architecture
- Small fixes and enhancements all over the place
- Removal of support for various obsolete hardware platforms and the
related code"
* tag 'irq-core-2023-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
irqchip/st: Remove stih415/stih416 and stid127 platforms support
irqchip/gic-v3: Add Rockchip 3588001 erratum workaround
genirq: Update affinity of secondary threads
softirq: Add trace points for tasklet entry/exit
irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling
irqchip/loongson-pch-pic: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix registration of syscore_ops
irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent
irqchip/loongson-eiointc: Fix returned value on parsing MADT
irqchip/riscv-intc: Add empty irq_eoi() for chained irq handlers
RISC-V: Use IPIs for remote icache flush when possible
RISC-V: Use IPIs for remote TLB flush when possible
RISC-V: Allow marking IPIs as suitable for remote FENCEs
RISC-V: Treat IPIs as normal Linux IRQs
irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
RISC-V: Clear SIP bit only when using SBI IPI operations
irqchip/irq-sifive-plic: Add syscore callbacks for hibernation
irqchip: Use of_property_read_bool() for boolean properties
irqchip/bcm-6345-l1: Request memory region
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
...
- Large RISC-V IPI rework to make way for a new interrupt
architecture
- More Loongarch fixes from Lianmin Lv, fixing issues in the so
called "dual-bridge" systems.
- Workaround for the nvidia T241 chip that gets confused in
3 and 4 socket configurations, leading to the GIC
malfunctionning in some contexts
- Drop support for non-firmware driven GIC configurarations
now that the old ARM11MP Cavium board is gone
- Workaround for the Rockchip 3588 chip that doesn't
correctly deal with the shareability attributes.
- Replace uses of of_find_property() with the more appropriate
of_property_read_bool()
- Make bcm-6345-l1 request its MMIO region
- Add suspend support to the SiFive PLIC
- Drop support for stih415, stih416 and stid127 platforms
-----BEGIN PGP SIGNATURE-----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=TsID
-----END PGP SIGNATURE-----
Merge tag 'irqchip-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip changes from Marc Zyngier:
- Large RISC-V IPI rework to make way for a new interrupt
architecture
- More Loongarch fixes from Lianmin Lv, fixing issues in the so
called "dual-bridge" systems.
- Workaround for the nvidia T241 chip that gets confused in
3 and 4 socket configurations, leading to the GIC
malfunctionning in some contexts
- Drop support for non-firmware driven GIC configurarations
now that the old ARM11MP Cavium board is gone
- Workaround for the Rockchip 3588 chip that doesn't
correctly deal with the shareability attributes.
- Replace uses of of_find_property() with the more appropriate
of_property_read_bool()
- Make bcm-6345-l1 request its MMIO region
- Add suspend support to the SiFive PLIC
- Drop support for stih415, stih416 and stid127 platforms
Link: https://lore.kernel.org/lkml/20230421132104.3021536-1-maz@kernel.org
The AIA specification introduce per-HART AIA CSRs which primarily
support:
* 64 local interrupts on both RV64 and RV32
* priority for each of the 64 local interrupts
* interrupt filtering for local interrupts
This patch virtualize above mentioned AIA CSRs and also extend
ONE_REG interface to allow user-space save/restore Guest/VM
view of these CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
To support 64 VCPU local interrupts on RV32 host, we should use
bitmap for irqs_pending and irqs_pending_mask in struct kvm_vcpu_arch.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We implement ONE_REG interface for AIA CSRs as a separate subtype
under the CSR ONE_REG interface.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
To make the CSR ONE_REG interface extensible, we implement subtype
for the CSR ONE_REG IDs. The existing CSR ONE_REG IDs are treated
as subtype = 0 (aka General CSRs).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
To incrementally implement AIA support, we first add minimal skeletal
support which only compiles and detects AIA hardware support at the
boot-time but does not provide any functionality.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The hgatp.VMID mask defines are used before shifting when extracting
VMID value from hgatp CSR value so based on the convention followed
in the other parts of asm/csr.h, the hgatp.VMID mask defines should
not have a _MASK suffix.
While we are here, let's use GENMASK() for hgatp.VMID and hgatp.PPN.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We have two extension names for AIA ISA support: Smaia (M-mode AIA CSRs)
and Ssaia (S-mode AIA CSRs).
We extend the ISA string parsing to detect Smaia and Ssaia extensions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbb extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We add ONE_REG interface to enable/disable SBI extensions (just
like the ONE_REG interface for ISA extensions). This allows KVM
user-space to decide the set of SBI extension enabled for a Guest
and by default all SBI extensions are enabled.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
After multiple attempts, this patchset is now based on the fact that the
64b kernel mapping was moved outside the linear mapping.
The first patch allows to build relocatable kernels but is not selected
by default. That patch is a requirement for KASLR.
The second and third patches take advantage of an already existing powerpc
script that checks relocations at compile-time, and uses it for riscv.
* b4-shazam-merge:
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
Link: https://lore.kernel.org/r/20230329045329.64565-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This patchset intends to improve tlb utilization by using hugepages for
the linear mapping.
As reported by Anup in v6, when STRICT_KERNEL_RWX is enabled, we must
take care of isolating the kernel text and rodata so that they are not
mapped with a PUD mapping which would then assign wrong permissions to
the whole region: it is achieved the same way as arm64 by using the
memblock nomap API which isolates those regions and re-merge them afterwards
thus avoiding any issue with the system resources tree creation.
arch/riscv/include/asm/page.h | 19 ++++++-
arch/riscv/mm/init.c | 102 ++++++++++++++++++++++++++--------
arch/riscv/mm/physaddr.c | 16 ++++++
drivers/of/fdt.c | 11 ++--
4 files changed, 118 insertions(+), 30 deletions(-)
* b4-shazam-merge:
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
Link: https://lore.kernel.org/r/20230324155421.271544-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During the early page table creation, we used to set the mapping for
PAGE_OFFSET to the kernel load address: but the kernel load address is
always offseted by PMD_SIZE which makes it impossible to use PUD/P4D/PGD
pages as this physical address is not aligned on PUD/P4D/PGD size (whereas
PAGE_OFFSET is).
But actually we don't have to establish this mapping (ie set va_pa_offset)
that early in the boot process because:
- first, setup_vm installs a temporary kernel mapping and among other
things, discovers the system memory,
- then, setup_vm_final creates the final kernel mapping and takes
advantage of the discovered system memory to create the linear
mapping.
During the first phase, we don't know the start of the system memory and
then until the second phase is finished, we can't use the linear mapping at
all and phys_to_virt/virt_to_phys translations must not be used because it
would result in a different translation from the 'real' one once the final
mapping is installed.
So here we simply delay the initialization of va_pa_offset to after the
system memory discovery. But to make sure noone uses the linear mapping
before, we add some guard in the DEBUG_VIRTUAL config.
Finally we can use PUD/P4D/PGD hugepages when possible, which will result
in a better TLB utilization.
Note that:
- this does not apply to rv32 as the kernel mapping lies in the linear
mapping.
- we rely on the firmware to protect itself using PMP.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Rob Herring <robh@kernel.org> # DT bits
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use directly phys_ram_base instead, riscv_pfn_base is just the pfn of
the address contained in phys_ram_base.
Even if there is no functional change intended in this patch, actually
setting phys_ram_base that early changes the behaviour of
kernel_mapping_pa_to_va during the early boot: phys_ram_base used to be
zero before this patch and now it is set to the physical start address of
the kernel. But it does not break the conversion of a kernel physical
address into a virtual address since kernel_mapping_pa_to_va should only
be used on kernel physical addresses, i.e. addresses greater than the
physical start address of the kernel.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230324155421.271544-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V now manages CPU topology using arch_topology which provides
CPU capacity and frequency related interfaces to access the cpu/freq
invariant in possible heterogeneous or DVFS-enabled platforms.
Here adds topology.h file to export the arch_topology interfaces for
replacing the scheduler's constant-based cpu/freq invariant accounting.
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Ley Foon Tan <lftan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230323123924.3032174-1-suagrfillet@gmail.com
[Palmer: Fix the whitespace issues.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Evan Green <evan@rivosinc.com> says:
There's been a bunch of off-list discussions about this, including at
Plumbers. The original plan was to do something involving providing an
ISA string to userspace, but ISA strings just aren't sufficient for a
stable ABI any more: in order to parse an ISA string users need the
version of the specifications that the string is written to, the version
of each extension (sometimes at a finer granularity than the RISC-V
releases/versions encode), and the expected use case for the ISA string
(ie, is it a U-mode or M-mode string). That's a lot of complexity to
try and keep ABI compatible and it's probably going to continue to grow,
as even if there's no more complexity in the specifications we'll have
to deal with the various ISA string parsing oddities that end up all
over userspace.
Instead this patch set takes a very different approach and provides a set
of key/value pairs that encode various bits about the system. The big
advantage here is that we can clearly define what these mean so we can
ensure ABI stability, but it also allows us to encode information that's
unlikely to ever appear in an ISA string (see the misaligned access
performance, for example). The resulting interface looks a lot like
what arm64 and x86 do, and will hopefully fit well into something like
ACPI in the future.
The actual user interface is a syscall, with a vDSO function in front of
it. The vDSO function can answer some queries without a syscall at all,
and falls back to the syscall for cases it doesn't have answers to.
Currently we prepopulate it with an array of answers for all keys and
a CPU set of "all CPUs". This can be adjusted as necessary to provide
fast answers to the most common queries.
An example series in glibc exposing this syscall and using it in an
ifunc selector for memcpy can be found at [1].
I was asked about the performance delta between this and something like
sysfs. I created a small test program and ran it on a Nezha D1
Allwinner board. Doing each operation 100000 times and dividing, these
operations take the following amount of time:
- open()+read()+close() of /sys/kernel/cpu_byteorder: 3.8us
- access("/sys/kernel/cpu_byteorder", R_OK): 1.3us
- riscv_hwprobe() vDSO and syscall: .0094us
- riscv_hwprobe() vDSO with no syscall: 0.0091us
These numbers get farther apart if we query multiple keys, as sysfs will
scale linearly with the number of keys, where the dedicated syscall
stays the same. To frame these numbers, I also did a tight
fork/exec/wait loop, which I measured as 4.8ms. So doing 4
open/read/close operations is a delta of about 0.3%, versus a single vDSO
call is a delta of essentially zero.
[1] https://patchwork.ozlabs.org/project/glibc/list/?series=343050
* b4-shazam-merge:
RISC-V: Add hwprobe vDSO function and data
selftests: Test the new RISC-V hwprobe interface
RISC-V: hwprobe: Support probing of misaligned access performance
RISC-V: hwprobe: Add support for RISCV_HWPROBE_BASE_BEHAVIOR_IMA
RISC-V: Add a syscall for HW probing
RISC-V: Move struct riscv_cpuinfo to new header
Link: https://lore.kernel.org/r/20230407231103.2622178-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a vDSO function __vdso_riscv_hwprobe, which can sit in front of the
riscv_hwprobe syscall and answer common queries. We stash a copy of
static answers for the "all CPUs" case in the vDSO data page. This data
is private to the vDSO, so we can decide later to change what's stored
there or under what conditions we defer to the syscall. Currently all
data can be discovered at boot, so the vDSO function answers all queries
when the cpumask is set to the "all CPUs" hint.
There's also a boolean in the data that lets the vDSO function know that
all CPUs are the same. In that case, the vDSO will also answer queries
for arbitrary CPU masks in addition to the "all CPUs" hint.
Signed-off-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-7-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows userspace to select various routines to use based on the
performance of misaligned access on the target hardware.
Rather than adding DT bindings, this change taps into the alternatives
mechanism used to probe CPU errata. Add a new function pointer alongside
the vendor-specific errata_patch_func() that probes for desirable errata
(otherwise known as "features"). Unlike the errata_patch_func(), this
function is called on each CPU as it comes up, so it can save
feature information per-CPU.
The T-head C906 has fast unaligned access, both as defined by GCC [1],
and in performing a basic benchmark, which determined that byte copies
are >50% slower than a misaligned word copy of the same data size (source
for this test at [2]):
bytecopy size f000 count 50000 offset 0 took 31664899 us
wordcopy size f000 count 50000 offset 0 took 5180919 us
wordcopy size f000 count 50000 offset 1 took 13416949 us
[1] https://github.com/gcc-mirror/gcc/blob/master/gcc/config/riscv/riscv.cc#L353
[2] https://pastebin.com/EPXvDHSW
Co-developed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-5-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We have an implicit set of base behaviors that userspace depends on,
which are mostly defined in various ISA specifications.
Co-developed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-4-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We don't have enough space for these all in ELF_HWCAP{,2} and there's no
system call that quite does this, so let's just provide an arch-specific
one to probe for hardware capabilities. This currently just provides
m{arch,imp,vendor}id, but with the key-value pairs we can pass more in
the future.
Co-developed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In preparation for tracking and exposing microarchitectural details to
userspace (like whether or not unaligned accesses are fast), move the
riscv_cpuinfo struct out to its own new cpufeatures.h header. It will
need to be used by more than just cpu.c.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-2-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv establishes 2 virtual mappings:
- early_pg_dir maps the kernel which allows to discover the system
memory
- swapper_pg_dir installs the final mapping (linear mapping included)
We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.
The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.
So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.
Fixes: 922b0375fc ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96 ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.
The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-5-apatel@ventanamicro.com
Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.
Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.
We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-4-apatel@ventanamicro.com
Various RISC-V drivers (such as SBI IPI, SBI Timer, SBI PMU, and
KVM RISC-V) don't have associated DT node but these drivers need
standard per-CPU (local) interrupts defined by the RISC-V privileged
specification.
We add riscv_get_intc_hwnode() in arch/riscv which allows RISC-V
drivers not having DT node to discover INTC hwnode which in-turn
helps these drivers to map per-CPU (local) interrupts provided
by the INTC driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-3-apatel@ventanamicro.com
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: these were also merged into fixes, but there's a cleanup that
depends on the merge so I'm taking it into for-next as well.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* commit '1ee7fc3f4d0a93831a20d5566f203d5ad6d44de8':
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: merging in the fixes as a branch as there's some features that
depend on it.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The has_fpu() check, which in turn calls riscv_has_extension_likely(),
relies on alternatives to figure out whether the system has an FPU.
As a result, it will malfunction on XIP kernels, as they do not support
the alternatives mechanism.
When alternatives support is not present, fall back to using
__riscv_isa_extension_available() in riscv_has_extension_[un]likely()
instead stead, which handily takes the same argument, so that kernels
that do not support alternatives can accurately report the presence of
FPU support.
Fixes: 702e64550b ("riscv: fpu: switch has_fpu() to riscv_has_extension_likely()")
Link: https://lore.kernel.org/all/ad445951-3d13-4644-94d9-e0989cda39c3@spud/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230324100538.3514663-2-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
The patches convert riscv to use the generic entry infrastructure from
kernel/entry/*. Some optimization for entry.S with new .macro and merge
ret_from_kernel_thread into ret_from_fork.
* b4-shazam-merge:
riscv: entry: Consolidate general regs saving/restoring
riscv: entry: Consolidate ret_from_kernel_thread into ret_from_fork
riscv: entry: Remove extra level wrappers of trace_hardirqs_{on,off}
riscv: entry: Convert to generic entry
riscv: entry: Add noinstr to prevent instrumentation inserted
riscv: ptrace: Remove duplicate operation
Link: https://lore.kernel.org/r/20230222033021.983168-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch converts riscv to use the generic entry infrastructure from
kernel/entry/*. The generic entry makes maintainers' work easier and
codes more elegant. Here are the changes:
- More clear entry.S with handle_exception and ret_from_exception
- Get rid of complex custom signal implementation
- Move syscall procedure from assembly to C, which is much more
readable.
- Connect ret_from_fork & ret_from_kernel_thread to generic entry.
- Wrap with irqentry_enter/exit and syscall_enter/exit_from_user_mode
- Use the standard preemption code instead of custom
Suggested-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Yipeng Zou <zouyipeng@huawei.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/20230222033021.983168-5-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.
Fixes: 3f1e782998 ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
When the Zicboz extension is available we can more rapidly zero naturally
aligned Zicboz block sized chunks of memory. As pages are always page
aligned and are larger than any Zicboz block size will be, then
clear_page() appears to be a good candidate for the extension. While cycle
count and energy consumption should also be considered, we can be pretty
certain that implementing clear_page() with the Zicboz extension is a win
by comparing the new dynamic instruction count with its current count[1].
Doing so we see that the new count is just over a quarter of the old count
(see patch6's commit message for more details).
For those of you who reviewed v1[2], you may be looking for the memset()
patches. As pointed out in v1, and a couple follow-up emails, it's not
clear that patching memset() is a win yet. When I get a chance to test
on real hardware with a comprehensive benchmark collection then I can
post the memset() patches separately (assuming the benchmarks show it's
worthwhile).
* b4-shazam-merge:
RISC-V: KVM: Expose Zicboz to the guest
RISC-V: KVM: Provide UAPI for Zicboz block size
RISC-V: Use Zicboz in clear_page when available
RISC-V: cpufeatures: Put the upper 16 bits of patch ID to work
RISC-V: Add Zicboz detection and block size parsing
dt-bindings: riscv: Document cboz-block-size
RISC-V: Factor out body of riscv_init_cbom_blocksize loop
RISC-V: alternatives: Support patching multiple insns in assembly
Link: https://lore.kernel.org/r/20230224162631.405473-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Guests may use the cbo.zero instruction when the CPU has the Zicboz
extension and the hypervisor sets henvcfg.CBZE.
Add Zicboz support for KVM guests which may be enabled and
disabled from KVM userspace using the ISA extension ONE_REG API.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230224162631.405473-9-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We're about to allow guests to use the Zicboz extension. KVM
userspace needs to know the cache block size in order to
properly advertise it to the guest. Provide a virtual config
register for userspace to get it with the GET_ONE_REG API, but
setting it cannot be supported, so disallow SET_ONE_REG.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20230224162631.405473-8-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Using memset() to zero a 4K page takes 563 total instructions, where
20 are branches. clear_page(), with Zicboz and a 64 byte block size,
takes 169 total instructions, where 4 are branches and 33 are nops.
Even though the block size is a variable, thanks to alternatives, we
can still implement a Duff device without having to do any preliminary
calculations. This is achieved by using the alternatives' cpufeature
value (the upper 16 bits of patch_id). The value used is the maximum
zicboz block size order accepted at the patch site. This enables us
to stop patching / unrolling when 4K bytes have been zeroed (we would
loop and continue after 4K if the page size would be larger)
For 4K pages, unrolling 16 times allows block sizes of 64 and 128 to
only loop a few times and larger block sizes to not loop at all. Since
cbo.zero doesn't take an offset, we also need an 'add' after each
instruction, making the loop body 112 to 160 bytes. Hopefully this
is small enough to not cause icache misses.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-7-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
cpufeature IDs are consecutive integers starting at 26, so a 32-bit
patch ID allows an aircraft carrier load of feature IDs. Repurposing
the upper 16 bits still leaves a boat load of feature IDs and gains
16 bits which may be used to control patching on a per patch-site
basis.
This will be initially used in Zicboz's application to clear_page(),
as Zicboz's block size must also be considered. In that case, the
upper 16-bit value's role will be to convey the maximum block size
which the Zicboz clear_page() implementation supports.
cpufeature patch sites which need to check for the existence or
absence of other cpufeatures may also be able to make use of this.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-6-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Parse "riscv,cboz-block-size" from the DT by piggybacking on Zicbom's
riscv_init_cbom_blocksize(). Additionally check the DT for the presence
of the "zicboz" extension and, when it's present, validate the parsed
cboz block size as we do Zicbom's cbom block size with
riscv_isa_extension_check().
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As pointed out in commit d374a16539 ("RISC-V: fix compile error
from deduplicated __ALTERNATIVE_CFG_2"), we need quotes around
parameters passed to macros within macros to avoid spaces being
interpreted as separators. ALT_NEW_CONTENT was trying to handle
this by defining new_c has a vararg, but this isn't sufficient
for calling ALTERNATIVE() from assembly with multiple instructions
in the new/old sequences. Remove the vararg "hack" and use quotes.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
This series has no intended functional change. These cleanups were
found while renaming errata_id to patch_id in order to better
convey that its purpose is larger than errata (it's also for
cpufeatures).
* b4-shazam-merge:
riscv: cpufeature: Drop errata_list.h and other unused includes
riscv: lib: Include hwcap.h directly
riscv: alternatives: Rename errata_id to patch_id
riscv: alternatives: Remove unnecessary define and unused struct
riscv: Rename Kconfig.erratas to Kconfig.errata
riscv: Clarify RISCV_ALTERNATIVE help text
Link: https://lore.kernel.org/r/20230224154601.88163-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alternatives are used for both errata and cpufeatures. Use a more
generic name, 'patch_id', as in "ID of code patching site", to
avoid confusion when alternatives are used for cpufeatures.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230224154601.88163-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A define and a struct were introduced with commit 6f4eea9046
("riscv: Introduce alternative mechanism to apply errata solution"),
which introduced alternatives to RISC-V. The define is used for
an arbitrary string length, specific to sifive errata, so just use
the number directly there instead. The struct has never been used,
so remove it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230224154601.88163-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Qinglin Pan <panqinglin00@gmail.com> says:
Svnapot is a RISC-V extension for marking contiguous 4K pages as a non-4K
page. This patch set is for using Svnapot in hugetlb fs and huge vmap.
This patchset adds a Kconfig item for using Svnapot in
"Platform type"->"SVNAPOT extension support". Its default value is on,
and people can set it off if they don't allow kernel to detect Svnapot
hardware support and leverage it.
Tested on:
- qemu rv64 with "Svnapot support" off and svnapot=true.
- qemu rv64 with "Svnapot support" on and svnapot=true.
- qemu rv64 with "Svnapot support" off and svnapot=false.
- qemu rv64 with "Svnapot support" on and svnapot=false.
* b4-shazam-merge:
riscv: mm: support Svnapot in huge vmap
riscv: mm: support Svnapot in hugetlb page
riscv: mm: modify pte format for Svnapot
Link: https://lore.kernel.org/r/20230209131647.17245-1-panqinglin00@gmail.com
[Palmer: fix up the feature ordering in the merge]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sergey Matyukevich <geomatsi@gmail.com> says:
Some time ago two different patches have been posted to fix stale TLB
entries that caused applications crashes.
The patch [0] suggested 'aggregating' mm_cpumask, i.e. current cpu is not
cleared for the switched-out task in switch_mm function. For additional
explanations see the commit message by Guo Ren. The same approach is
used by arc architecture, so another good comment is for switch_mm
in arch/arc/include/asm/mmu_context.h.
The patch [1] attempted to reduce the number of TLB flushes by deferring
(and possibly avoiding) them for CPUs not running the task.
Patch [1] has been merged. However we already have two bug reports from
different vendors. So apparently something is missing in the approach
suggested in [1]. In both cases the patch [0] fixed the issue.
This patch series reverts [1] and replaces it by [0].
[0] https://lore.kernel.org/linux-riscv/20221111075902.798571-1-guoren@kernel.org/
[1] https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/
* b4-shazam-merge:
riscv: asid: Fixup stale TLB entry cause application crash
Revert "riscv: mm: notify remote harts about mmu cache updates"
Link: https://lore.kernel.org/r/20230226150137.1919750-1-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts the remaining bits of commit 4bd1d80efb ("riscv: mm:
notify remote harts harts about mmu cache updates").
According to bug reports, suggested approach to fix stale TLB entries
is not sufficient. It needs to be replaced by a more robust solution.
Fixes: 4bd1d80efb ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: Zong Li <zong.li@sifive.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230226150137.1919750-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We're currently using stop_machine() to update ftrace & kprobes, which
means that the thread that takes text_mutex during may not be the same
as the thread that eventually patches the code. This isn't actually a
race because the lock is still held (preventing any other concurrent
accesses) and there is only one thread running during stop_machine(),
but it does trigger a lockdep failure.
This patch just elides the lockdep check during stop_machine.
Fixes: c15ac4fd60 ("riscv/ftrace: Add dynamic function tracer support")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230303143754.4005217-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As HAVE_ARCH_HUGE_VMAP and HAVE_ARCH_HUGE_VMALLOC is supported, we can
implement arch_vmap_pte_range_map_size and arch_vmap_pte_supported_shift
for Svnapot to support huge vmap about napot size.
It can be tested by huge vmap used in pci driver. Huge vmalloc with svnapot
can be tested by test_vmalloc with [1] applied, and probe this
module to run fix_size_alloc_test with use_huge true.
[1]https://lore.kernel.org/all/20221212055657.698420-1-panqinglin2020@iscas.ac.cn/
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230209131647.17245-4-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Svnapot can be used to support 64KB hugetlb page, so it can become a new
option when using hugetlbfs. Add a basic implementation of hugetlb page,
and support 64KB as a size in it by using Svnapot.
For test, boot kernel with command line contains "default_hugepagesz=64K
hugepagesz=64K hugepages=20" and run a simple test like this:
tools/testing/selftests/vm/map_hugetlb 1 16
And it should be passed.
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230209131647.17245-3-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add one alternative to enable/disable svnapot support, enable this static
key when "svnapot" is in the "riscv,isa" field of fdt and SVNAPOT compile
option is set. It will influence the behavior of has_svnapot. All code
dependent on svnapot should make sure that has_svnapot return true firstly.
Modify PTE definition for Svnapot, and creates some functions in pgtable.h
to mark a PTE as napot and check if it is a Svnapot PTE. Until now, only
64KB napot size is supported in spec, so some macros has only 64KB version.
Signed-off-by: Qinglin Pan <panqinglin00@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230209131647.17245-2-panqinglin00@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Some cleanups and fixes for the Zbb-optimized string routines.
* Support for custom (vendor or implementation defined) perf events.
* COMMAND_LINE_SIZE has been increased to 1024.
-----BEGIN PGP SIGNATURE-----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=68ZK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Some cleanups and fixes for the Zbb-optimized string routines
- Support for custom (vendor or implementation defined) perf events
- COMMAND_LINE_SIZE has been increased to 1024
* tag 'riscv-for-linus-6.3-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Bump COMMAND_LINE_SIZE value to 1024
drivers/perf: RISC-V: Allow programming custom firmware events
riscv, lib: Fix Zbb strncmp
RISC-V: improve string-function assembly
Increase COMMAND_LINE_SIZE as the current default value is too low
for syzbot kernel command line.
There has been considerable discussion on this patch that has led to a
larger patch set removing COMMAND_LINE_SIZE from the uapi headers on all
ports. That's not quite done yet, but it's gotten far enough we're
confident this is not a uABI change so this is safe.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20210316193420.904-1-alex@ghiti.fr
[Palmer: it's not uabi]
Link: https://lore.kernel.org/linux-riscv/874b8076-b0d1-4aaa-bcd8-05d523060152@app.fastmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features.
* Various improvements to the extension detection and alternative
patching infrastructure.
* Zbb-optimized string routines.
* Support for cpu-capacity in the RISC-V DT bindings.
* Zicbom no longer depends on toolchain support.
* Some performance and code size improvements to ftrace.
* Support for ARCH_WANT_LD_ORPHAN_WARN.
* Oops now contain the faulting instruction.
-----BEGIN PGP SIGNATURE-----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=XgYl
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
- Performance tweaks for efifb earlycon by Andy
- Preparatory refactoring and cleanup work in the efivar layer by Johan,
which is needed to accommodate the Snapdragon arm64 laptops that
expose their EFI variable store via a TEE secure world API.
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory attributes
table, so that firmware that is generated with ENDBR/BTI landing pads
will be mapped with enforcement enabled.
- Clean up how we check and print the EFI revision exposed by the
firmware.
- Incorporate EFI memory attributes protocol definition contributed by
Evgeniy and wire it up in the EFI zboot code. This ensures that these
images can execute under new and stricter rules regarding the default
memory permissions for EFI page allocations. (More work is in progress
here)
- CPER header cleanup by Dan Williams
- Use a raw spinlock to protect the EFI runtime services stack on arm64
to ensure the correct semantics under -rt. (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad by Darrell.
-----BEGIN PGP SIGNATURE-----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=+pOz
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
The patchwork automation reported a sparse complaint that
spin_shadow_stack was not declared and should be static:
../arch/riscv/kernel/traps.c:335:15: warning: symbol 'spin_shadow_stack' was not declared. Should it be static?
However, this is used in entry.S and therefore shouldn't be static.
The same applies to the shadow_stack that this pseudo spinlock is
trying to protect, so do like its charge and add a declaration to
thread_info.h
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 7e1864332f ("riscv: fix race when vmap stack overflow")
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230210185945.915806-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add header include guards to insn.h to prevent repeating declaration of
any identifiers in insn.h.
Fixes: edde5584c7 ("riscv: Add SW single-step support for KDB")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes: c9c1af3f18 ("RISC-V: rename parse_asm.h to insn.h")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129094242.282620-1-liaochang1@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While the comment above the ISA extension ID definitions says
"Entries are sorted alphabetically.", this stopped being good
advice with commit d8a3d8a752 ("riscv: hwcap: make ISA extension
ids can be used in asm"), as we now use macros instead of enums.
Reshuffling defines is error-prone, so, since they don't need to be
in any particular order, change the advice to just adding new
extensions at the bottom. Also, take the opportunity to change
spaces to tabs, merge three comments into one, and move the base
and max defines into more logical locations wrt the ID definitions.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230209123636.123537-1-ajones@ventanamicro.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Runtime code patching must be done at a naturally aligned address, or we
may execute on a partial instruction.
We have encountered problems traced back to static jump functions during
the test. We switched the tracer randomly for every 1~5 seconds on a
dual-core QEMU setup and found the kernel sucking at a static branch
where it jumps to itself.
The reason is that the static branch was 2-byte but not 4-byte aligned.
Then, the kernel would patch the instruction, either J or NOP, with two
half-word stores if the machine does not have efficient unaligned
accesses. Thus, moments exist where half of the NOP mixes with the other
half of the J when transitioning the branch. In our particular case, on
a little-endian machine, the upper half of the NOP was mixed with the
lower part of the J when enabling the branch, resulting in a jump that
jumped to itself. Conversely, it would result in a HINT instruction when
disabling the branch, but it might not be observable.
ARM64 does not have this problem since all instructions must be 4-byte
aligned.
Fixes: ebc00dde8a ("riscv: Add jump-label implementation")
Link: https://lore.kernel.org/linux-riscv/20220913094252.3555240-6-andy.chiu@sifive.com/
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230206090440.1255001-1-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The recent refactoring led to us leaking some HWCAP bits to userspace
that didn't make much sense. With any luck we'll have a better scheme
soon, but for now just mask off those bits to avoid polluting userspace.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230202233832.11036-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is a partial revert of the commit 4bd1d80efb ("riscv: mm: notify
remote harts about mmu cache updates"). Original commit included two
loosely related changes serving the same purpose of fixing stale TLB
entries causing user-space application crash:
- introduce deferred per-ASID TLB flush for CPUs not running the task
- switch to per-ASID TLB flush on all CPUs running the task in update_mmu_cache
According to report and discussion in [1], the second part caused a
regression on Renesas RZ/Five SoC. For now restore the old behavior
of the update_mmu_cache.
[1] https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/
Fixes: 4bd1d80efb ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: trailer, so that it can be parsed with git's trailer functionality?
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230129211818.686557-1-geomatsi@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY+/uBgAKCRDbK58LschI
g0ngAPwJHd1RicBuy2C4fLv0nGKZtmYZBAnTGlI2RisPxU6BRwEAwUDLHuc5K6nR
j261okOxOy/MRxdN1NhmR6Qe7nMyQAk=
=tYU+
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend patch_text for multiple instructions. This is the preparaiton for
multiple instructions text patching in riscv BPF trampoline, and may be
useful for other scenario.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/bpf/20230215135205.1411105-2-pulehui@huaweicloud.com
The __RISCV_INSN_FUNCS originally declared riscv_insn_is_* functions inside
the kprobes implementation. This got moved into a central header in
commit ec5f908775 ("RISC-V: Move riscv_insn_is_* macros into a common header").
Though it looks like I overlooked two of them, so fix that. FENCE itself is
an instruction defined directly by its own opcode, while the created
riscv_isn_is_system function covers all instructions defined under the SYSTEM
opcode.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230113211955.3534431-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
guoren@kernel.org <guoren@kernel.org> says:
From: Guo Ren <guoren@linux.alibaba.com>
The previous ftrace detour implementation fc76b8b8011 ("riscv: Using
PATCHABLE_FUNCTION_ENTRY instead of MCOUNT") contain three problems.
- The most horrible bug is preemption panic which found by Andy [1].
Let's disable preemption for ftrace first, and Andy could continue
the ftrace preemption work.
- The "-fpatchable-function-entry= CFLAG" wasted code size
!RISCV_ISA_C.
- The ftrace detour implementation wasted code size.
- When livepatching, the trampoline (ftrace_regs_caller) would not
return to <func_prolog+12> but would rather jump to the new function.
So, "REG_L ra, -SZREG(sp)" would not run and the original return
address would not be restored. The kernel is likely to hang or crash
as a result. (Found by Evgenii Shatokhin [4])
[Palmer: The first three patches in this series are pretty concrete
fixes, so I'm pulling them ahead of the rest of the series.]
* b4-shazam-merge:
riscv: ftrace: Reduce the detour code size to half
riscv: ftrace: Remove wasted nops for !RISCV_ISA_C
riscv: ftrace: Fixup panic by disabling preemption
Link: https://lore.kernel.org/r/20230112090603.1295340-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use a temporary register to reduce the size of detour code from 16 bytes to
8 bytes. The previous implementation is from 'commit afc76b8b80 ("riscv:
Using PATCHABLE_FUNCTION_ENTRY instead of MCOUNT")'.
Before the patch:
<func_prolog>:
0: REG_S ra, -SZREG(sp)
4: auipc ra, ?
8: jalr ?(ra)
12: REG_L ra, -SZREG(sp)
(func_boddy)
After the patch:
<func_prolog>:
0: auipc t0, ?
4: jalr t0, ?(t0)
(func_boddy)
This patch not just reduces the size of detour code, but also fixes an
important issue:
An Ftrace callback registered with FTRACE_OPS_FL_IPMODIFY flag can
actually change the instruction pointer, e.g. to "replace" the given
kernel function with a new one, which is needed for livepatching, etc.
In this case, the trampoline (ftrace_regs_caller) would not return to
<func_prolog+12> but would rather jump to the new function. So, "REG_L
ra, -SZREG(sp)" would not run and the original return address would not
be restored. The kernel is likely to hang or crash as a result.
This can be easily demonstrated if one tries to "replace", say,
cmdline_proc_show() with a new function with the same signature using
instruction_pointer_set(&fregs->regs, new_func_addr) in the Ftrace
callback.
Link: https://lore.kernel.org/linux-riscv/20221122075440.1165172-1-suagrfillet@gmail.com/
Link: https://lore.kernel.org/linux-riscv/d7d5730b-ebef-68e5-5046-e763e1ee6164@yadro.com/
Co-developed-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20230112090603.1295340-4-guoren@kernel.org
Cc: stable@vger.kernel.org
Fixes: 10626c32e3 ("riscv/ftrace: Add basic support")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
I've yoinked patch 1 from Drew's series adding support for Zicboz &
attached two more patches here that remove the need for, and then drop
the toolchain support checks for Zicbom. The goal is to remove the need
for checking the presence of toolchain Zicbom support in the work being
done to support non instruction based CMOs [1].
I've tested compliation on a number of different configurations with
the Zicbom config option enabled. The important ones to call out I
guess are:
- clang/llvm 14 w/ LLVM=1 which doesn't support Zicbom atm.
- gcc 11 w/ binutils 2.37 which doesn't support Zicbom atm either.
- clang/llvm 15 w/ LLVM=1 BUT with binutils 2.37's ld. This is the
configuration that prompted adding the LD checks as cc/as supports
Zicbom, but ld doesn't [2].
- gcc 12 w/ binutils 2.39 & clang 15 w/ LLVM=1, both of these supported
Zicbom before and still do.
I also checked building the THEAD errata etc with
CONFIG_RISCV_ISA_ZICBOM disabled, and there were no build issues there
either.
* b4-shazam-merge:
RISC-V: remove toolchain version checks for Zicbom
RISC-V: replace cbom instructions with an insn-def
RISC-V: insn-def: Add I-type insn-def
Link: https://lore.kernel.org/r/20230108163356.3063839-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CBO instructions use the I-type of instruction format where
the immediate is used to identify the CBO instruction type.
Add I-type instruction encoding support to insn-def.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230108163356.3063839-2-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Ever since RISC-V starting using generic arch topology code, the code
paths for cpu-capacity have been there but there's no binding defined to
actually convey the information. Defining the same property as used on
arm seems to be the only logical thing to do, so do it.
[Palmer: This is on top of the fix required to make it work, which
itself wasn't merged until late in the 6.2 cycle and thus pulls in
various other fixes.]
* b4-shazam-merge:
dt-bindings: riscv: add a capacity-dmips-mhz cpu property
dt-bindings: arm: move cpu-capacity to a shared loation
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
riscv: uaccess: fix type of 0 variable on error in get_user()
riscv, kprobes: Stricter c.jr/c.jalr decoding
Link: https://lore.kernel.org/r/20230104180513.1379453-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 4bf8860760 ("riscv: cpufeature: extend
riscv_cpufeature_patch_func to all ISA extensions") switched ISA
extension alternatives to use the RISCV_ISA_EXT_* macros instead of
CPUFEATURE_*. This was mismerged when applied on top of the Zbb series,
so the Zbb alternatives referenced the wrong errata ID values.
Fixes: 9daca9a5b9 ("Merge patch series "riscv: improve boot time isa extensions handling"")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230212021534.59121-3-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Every architecture that supports FLATMEM memory model defines its own
version of pfn_valid() that essentially compares a pfn to max_mapnr.
Use mips/powerpc version implemented as static inline as a generic
implementation of pfn_valid() and drop its per-architecture definitions.
[rppt@kernel.org: fix the generic pfn_valid()]
Link: https://lkml.kernel.org/r/Y9lg7R1Yd931C+y5@kernel.org
Link: https://lkml.kernel.org/r/20230129124235.209895-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Huacai Chen <chenhuacai@loongson.cn> [LoongArch]
Acked-by: Stafford Horne <shorne@gmail.com> [OpenRISC]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Cc: Brian Cain <bcain@quicinc.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SBI PMU extension defines a set of firmware events which can provide
useful information to guests about the number of SBI calls. As
hypervisor implements the SBI PMU extension, these firmware events
correspond to ecall invocations between VS->HS mode. All other firmware
events will always report zero if monitored as KVM doesn't implement them.
This patch adds all the infrastructure required to support firmware
events.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
As the KVM guests only see the virtual PMU counters, all hpmcounter
access should trap and KVM emulates the read access on behalf of guests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This patch only adds barebone structure of perf implementation. Most
of the function returns zero at this point and will be implemented
fully in the future.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the SBI extension handle is expected to return Linux error code.
The top SBI layer converts the Linux error code to SBI specific error code
that can be returned to guest invoking the SBI calls. This model works
as long as SBI error codes have 1-to-1 mappings between them.
However, that may not be true always. This patch attempts to disassociate
both these error codes by allowing the SBI extension implementation to
return SBI specific error codes as well.
The extension will continue to return the Linux error specific code which
will indicate any problem *with* the extension emulation while the
SBI specific error will indicate the problem *of* the emulation.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently the probe function just checks if an SBI extension is
registered or not. However, the extension may not want to advertise
itself depending on some other condition.
An additional extension specific probe function will allow
extensions to decide if they want to be advertised to the caller or
not. Any extension that does not require additional dependency checks
can avoid implementing this function.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This patch fixes/improve few minor things in SBI PMU extension
definition.
1. Align all the firmware event names.
2. Add macros for bit positions in cache event ID & ops.
The changes were small enough to combine them together instead
of creating 1 liner patches.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.
Link: https://lkml.kernel.org/r/20230113171026.582290-27-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE by stealing one bit from the
offset. This reduces the maximum swap space per file: on 32bit to 16 GiB
(was 32 GiB).
Note that this bit does not conflict with swap PMDs and could also be used
in swap PMD context later.
While at it, mask the type in __swp_entry().
Link: https://lkml.kernel.org/r/20230113171026.582290-20-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When THP is enabled, 4K pages are collapsed into a single huge
page using the generic pmdp_collapse_flush() which will further
use flush_tlb_range() to shoot-down stale TLB entries. Unfortunately,
the generic pmdp_collapse_flush() only invalidates cached leaf PTEs
using address specific SFENCEs which results in repetitive (or
unpredictable) page faults on RISC-V implementations which cache
non-leaf PTEs.
Provide a RISC-V specific pmdp_collapse_flush() which ensures both
cached leaf and non-leaf PTEs are invalidated by using non-address
specific SFENCEs as recommended by the RISC-V privileged specification.
Fixes: e88b333142 ("riscv: mm: add THP support on 64-bit")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Link: https://lore.kernel.org/r/20230130074815.1694055-1-mchitale@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting, this
chacteristic makes it straightforward to use a static branch to check
a specific ISA extension is supported or not to optimize performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
[1]https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/
[2]https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/
[3]https://lore.kernel.org/linux-riscv/20221130225614.1594256-1-heiko@sntech.de/
* b4-shazam-merge:
riscv: remove riscv_isa_ext_keys[] array and related usage
riscv: KVM: Switch has_svinval() to riscv_has_extension_unlikely()
riscv: cpu_relax: switch to riscv_has_extension_likely()
riscv: alternative: patch alternatives in the vDSO
riscv: switch to relative alternative entries
riscv: module: Add ADD16 and SUB16 rela types
riscv: module: move find_section to module.h
riscv: fpu: switch has_fpu() to riscv_has_extension_likely()
riscv: introduce riscv_has_extension_[un]likely()
riscv: cpufeature: extend riscv_cpufeature_patch_func to all ISA extensions
riscv: hwcap: make ISA extension ids can be used in asm
riscv: cpufeature: detect RISCV_ALTERNATIVES_EARLY_BOOT earlier
riscv: move riscv_noncoherent_supported() out of ZICBOM probe
Link: https://lore.kernel.org/r/20230128172856.3814-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
All users have switched to riscv_has_extension_*, remove unused
definitions, vars and related setting code.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230128172856.3814-14-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Make it possible to use alternatives in the vDSO, so that better
implementations can be used if possible.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230128172856.3814-11-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instead of using absolute addresses for both the old instrucions and
the alternative instructions, use offsets relative to the alt_entry
values. So this not only cuts the size of the alternative entry, but
also meets the prerequisite for patching alternatives in the vDSO,
since absolute alternative entries are subject to dynamic relocation,
which is incompatible with the vDSO building.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-10-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Move find_section() to module.h so that the implementation can be shared
by the alternatives code. This will allow us to use alternatives in
the vdso.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230128172856.3814-8-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Generally, riscv ISA extensions are fixed for any specific hardware
platform, so a hart's features won't change after booting. This
chacteristic makes it straightforward to use a static branch to check
if a specific ISA extension is supported or not to optimize
performance.
However, some ISA extensions such as SVPBMT and ZICBOM are handled
via. the alternative sequences.
Basically, for ease of maintenance, we prefer to use static branches
in C code, but recently, Samuel found that the static branch usage in
cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE[1]. As
Samuel pointed out, "Having a static branch in cpu_relax() is
problematic because that function is widely inlined, including in some
quite complex functions like in the VDSO. A quick measurement shows
this static branch is responsible by itself for around 40% of the jump
table."
Samuel's findings pointed out one of a few downsides of static branches
usage in C code to handle ISA extensions detected at boot time:
static branch's metadata in the __jump_table section, which is not
discarded after ISA extensions are finalized, wastes some space.
I want to try to solve the issue for all possible dynamic handling of
ISA extensions at boot time. Inspired by Mark[2], this patch introduces
riscv_has_extension_*() helpers, which work like static branches but
are patched using alternatives, thus the metadata can be freed after
patching.
Link: https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/ [1]
Link: https://lore.kernel.org/linux-arm-kernel/20220912162210.3626215-8-mark.rutland@arm.com/ [2]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-6-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
riscv_cpufeature_patch_func() currently only scans a limited set of
cpufeatures, explicitly defined with macros. Extend it to probe for all
ISA extensions.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
So that ISA extensions can be used in assembly files, convert the
multi-letter RISC-V ISA extension IDs enums to macros.
In order to make them visible, move the #ifndef __ASSEMBLY__ guard
to a later point in the header
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is a single fix, but it conflicts with some recent features. I'm
merging it on top of the commit it fixes to ease backporting.
* b4-shazam-merge:
riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
Link: https://lore.kernel.org/r/20220922060958.44203-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 8eb060e101 ("arch/riscv: add Zihintpause support") broke
building with CONFIG_CC_OPTIMIZE_FOR_SIZE enabled (gcc 11.1.0):
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <command-line>:
./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax':
././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0 probably does not match constraints
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
././include/linux/compiler_types.h:285:33: error: impossible constraint in 'asm'
285 | #define asm_volatile_goto(x...) asm goto(x)
| ^~~
./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto'
41 | asm_volatile_goto(
| ^~~~~~~~~~~~~~~~~
make[1]: *** [scripts/Makefile.build:249: arch/riscv/kernel/vdso/vgettimeofday.o] Error 1
make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2
Having a static branch in cpu_relax() is problematic because that
function is widely inlined, including in some quite complex functions
like in the VDSO. A quick measurement shows this static branch is
responsible by itself for around 40% of the jump table.
Drop the static branch, which ends up being the same number of
instructions anyway. If Zihintpause is supported, we trade the nop from
the static branch for a div. If Zihintpause is unsupported, we trade the
jump from the static branch for (what gets interpreted as) a nop.
Fixes: 8eb060e101 ("arch/riscv: add Zihintpause support")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Heiko Stuebner <heiko@sntech.de> says:
From: Heiko Stuebner <heiko.stuebner@vrull.eu>
This series still tries to allow optimized string functions for specific
extensions. The last approach of using an inline base function to hold
the alternative calls did cause some issues in a number of places
So instead of that we're now just using an alternative j at the beginning
of the generic function to jump to a separate place inside the function
itself.
* b4-shazam-merge:
RISC-V: add zbb support to string functions
RISC-V: add infrastructure to allow different str* implementations
Link: https://lore.kernel.org/r/20230113212301.3534711-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add handling for ZBB extension and add support for using it as a
variant for optimized string functions.
Support for the Zbb-str-variants is limited to the GNU-assembler
for now, as LLVM has not yet acquired the functionality to
selectively change the arch option in assembler code.
This is still under review at
https://reviews.llvm.org/D123515
Co-developed-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Christoph Muellner <christoph.muellner@vrull.eu>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230113212301.3534711-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Depending on supported extensions on specific RISC-V cores,
optimized str* functions might make sense.
This adds basic infrastructure to allow patching the function calls
via alternatives later on.
The Linux kernel provides standard implementations for string functions
but when architectures want to extend them, they need to provide their
own.
The added generic string functions are done in assembler (taken from
disassembling the main-kernel functions for now) to allow us to control
the used registers and extend them with optimized variants.
This doesn't override the compiler's use of builtin replacements. So still
first of all the compiler will select if a builtin will be better suitable
i.e. for known strings. For all regular cases we will want to later
select possible optimized variants and in the worst case fall back to the
generic implemention added with this change.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230113212301.3534711-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit b0f4c74ead ("RISC-V: Fix unannoted hardirqs-on in return to
userspace slow-path") renamed the do_notify_resume function to
do_work_pending but did not change the prototype in signal.h
Do that now, as the original function does not exist anymore.
Fixes: b0f4c74ead ("RISC-V: Fix unannoted hardirqs-on in return to userspace slow-path")
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230118142252.337103-1-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alternatives live in a different section, so offsets used by jal
instruction will point to wrong locations after the patch got applied.
Similar to arm64, adjust the location to consider that offset.
Co-developed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230113212205.3534622-1-heiko@sntech.de
Fixes: 27c653c065 ("RISC-V: fix auipc-jalr addresses in patched alternatives")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
KERN_VIRT_SIZE is 1/4 of the entries of the page global directory,
not half.
Fixes: f7ae02333d ("riscv: Move KASAN mapping next to the kernel mapping")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230110080419.931185-1-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ARM:
* Fix the PMCR_EL0 reset value after the PMU rework
* Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
* Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
* Put the Apple M2 on the naughty list for not being able to
correctly implement the vgic SEIS feature, just like the M1
before it
* Reviewer updates: Alex is stepping down, replaced by Zenghui
x86:
* Fix various rare locking issues in Xen emulation and teach lockdep
to detect them
* Documentation improvements
* Do not return host topology information from KVM_GET_SUPPORTED_CPUID
This cleans up the ISA string handling to more closely match a version
of the ISA spec. This is visible in /proc/cpuinfo and the ordering
changes may break something in userspace, but these orderings have
changed before without issues so with any luck that's still the case.
This also adds documentation so userspace has a better idea of what is
intended when it comes to compatibility for /proc/cpuinfo, which should
help everyone as this will likely keep changing.
* b4-shazam-merge:
Documentation: riscv: add a section about ISA string ordering in /proc/cpuinfo
RISC-V: resort all extensions in consistent orders
RISC-V: clarify ISA string ordering rules in cpu.c
Link: https://lore.kernel.org/r/20221205144525.2148448-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On the non-assembler-side wrapping alternative-macros inside other macros
to prevent duplication of code works, as the end result will just be a
string that gets fed to the asm instruction.
In real assembler code, wrapping .macro blocks inside other .macro blocks
brings more restrictions on usage it seems and the optimization done by
commit 2ba8c7dc71 ("riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2")
results in a compile error like:
../arch/riscv/lib/strcmp.S: Assembler messages:
../arch/riscv/lib/strcmp.S:15: Error: too many positional arguments
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "887:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "887:"
../arch/riscv/lib/strcmp.S:15: Error: backward ref to unknown label "886:"
../arch/riscv/lib/strcmp.S:15: Error: attempt to move .org backwards
Wrapping the variables containing assembler code in quotes solves this issue,
compilation and the code in question still works and objdump also shows sane
decompiled results of the affected code.
Fixes: 2ba8c7dc71 ("riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2")
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230105192610.1940841-1-heiko@sntech.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Ordering between each and every list of extensions is wildly
inconsistent. Per discussion on the lists pick the following policy:
- The array defining order in /proc/cpuinfo follows a narrow
interpretation of the ISA specifications, described in a comment
immediately presiding it.
- All other lists of extensions are sorted alphabetically.
This will hopefully allow for easier review & future additions, and
reduce conflicts between patchsets as the number of extensions grows.
Link: https://lore.kernel.org/all/20221129144742.2935581-2-conor.dooley@microchip.com/
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221205144525.2148448-3-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221229170545.718264-1-ben-linux@fluff.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that KVM setup is handled directly in riscv_kvm_init(), tag functions
and data that are used/set only during init with __init/__ro_after_init.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-26-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_hardware_setup() and kvm_arch_hardware_unsetup() now that
all implementations are nops.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com> # s390
Acked-by: Anup Patel <anup@brainfault.org>
Message-Id: <20221130230934.1014142-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alternatives live in a different section, so addresses used by call
functions will point to wrong locations after the patch got applied.
Similar to arm64, adjust the location to consider that offset.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-13-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Used together U-type and I-type instructions can for example be used to
generate bigger jumps (i.e. in auipc+jalr pairs) by splitting the value
into an upper immediate (i.e. auipc) and a 12bit immediate (i.e. jalr).
Due to both immediates being considered signed this creates some corner
cases, so add some helper to prevent this from getting duplicated in
different places.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-12-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a macro to allow parsing of the rd register from an instruction.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-11-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Similar to other existing types, allow extracting the immediate
for a U-type instruction.
U-type immediates are special in that regard, that the value
in the instruction in bits [31:12] already represents the same
bits of the immediate, so no shifting is required.
U-type immediates are for example used in the auipc instruction,
so these constants make it easier to parse such instructions.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-10-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The current parse_asm header should become a more centralized place
for everything concerning parsing and constructing instructions.
We already have a header insn-def.h similar to aarch64, so rename
parse_asm.h to insn.h (again similar to aarch64) to show that it's
meant for more than simple instruction parsing.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-8-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Right now the riscv kernel has (at least) two independent sets
of functions to check if an encoded instruction is of a specific
type. One in kgdb and one kprobes simulate-insn code.
More parts of the kernel will probably need this in the future,
so instead of allowing this duplication to go on further,
move macros that do the function declaration in a common header,
similar to at least aarch64.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-7-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instruction parsing should not be done in individual code, but instead
supported by central
Right now kgdb and kprobes parse instructions and at least kprobes (and
the upcoming auipc+jalr alternative fixer-function) need the auipc
instruction.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
kprobes need to match ebreak instructions, so add the necessary
data to enable us to centralize that functionality.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-5-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Rather than defining funct3, funct4, etc values pre-shifted to their
target-position in an instruction, define the values themselves and
only shift them where needed.
This allows using these funct-values in other places as well, for example
when decoding functions.
At the same time also reduces the use of magic numbers, one would need
a spec manual to understand.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some of the constants and macros already have suitable RV_, RVG_ or
RVC_ prefixes.
Extend this to the rest of the file as well, as we want to use these
things in a broader scope soon.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The opcode definition for c.jalr is
c.jalr c_rs1_n0 1..0=2 15..13=4 12=1 6..2=0
This means funct4 consisting of bit [15:12] is 1001b, so the value is 0x9.
Fixes: edde5584c7 ("riscv: Add SW single-step support for KDB")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20221223221332.4127602-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Allow unloading KVM module
* Allow KVM user-space to set mvendorid, marchid, and mimpid
* Several fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOhy+QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOdUwf+K3i8RHW1H8TF/JSrn1I6nURNLYhb
2wXzl3esOsfswtn6dxEvLEXivcKmD2G9bLpa2UIa3vw1Plg9tdce9IJ5qDodtxVL
mlISMUSgMNy+lelKJiG+l5Ld4oJ4HUY0yw/p3Ml9WUpra98UCB0sJ+FsqXr4ndi9
LxkQJrNyZkQcRH2IXjQhKjdjkepFTmkhKs/uCxAZvW9zfUmGX0dcp9W22PTbsapQ
IcaBKdVaNN3TXNSIdDCM2Iv+oBN7gJn1CbgFxhkp4L8eE5PvRjFw0QooFMn2TjDw
VflP3gIs/41+5tnoPWXGAkKFe/Z5aJjGjx6Yx0WnEEgoAG47RUHYsKIUjw==
=8ejV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
* Support for the T-Head PMU via the perf subsystem.
* ftrace support for rv32.
* Support for non-volatile memory devices.
* Various fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=4Ak2
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the T-Head PMU via the perf subsystem
- ftrace support for rv32
- Support for non-volatile memory devices
- Various fixes and cleanups
* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
Documentation: RISC-V: patch-acceptance: s/implementor/implementer
Documentation: RISC-V: Mention the UEFI Standards
Documentation: RISC-V: Allow patches for non-standard behavior
Documentation: RISC-V: Fix a typo in patch-acceptance
riscv: Fixup compile error with !MMU
riscv: Fix P4D_SHIFT definition for 3-level page table mode
riscv: Apply a static assert to riscv_isa_ext_id
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
riscv: mm: call best_map_size many times during linear-mapping
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
riscv: boot: add zstd support
...
- More userfaultfs work from Peter Xu.
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying.
- Some filemap cleanups from Vishal Moola.
- David Hildenbrand added the ability to selftest anon memory COW handling.
- Some cpuset simplifications from Liu Shixin.
- Addition of vmalloc tracing support by Uladzislau Rezki.
- Some pagecache folioifications and simplifications from Matthew Wilcox.
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use it.
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword. This series shold have been in the
non-MM tree, my bad.
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages.
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages.
- Peter Xu utilized the PTE marker code for handling swapin errors.
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient.
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand.
- zram support for multiple compression streams from Sergey Senozhatsky.
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway.
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations.
- Vishal Moola removed the try_to_release_page() wrapper.
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache.
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking.
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend.
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range().
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen.
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect.
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages().
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting.
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines.
- Many singleton patches, as usual.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY5j6ZwAKCRDdBJ7gKXxA
jkDYAP9qNeVqp9iuHjZNTqzMXkfmJPsw2kmy2P+VdzYVuQRcJgEAgoV9d7oMq4ml
CodAgiA51qwzId3GRytIo/tfWZSezgA=
=d19R
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB or
systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it to
recover from synchronous exceptions that might occur in the firmware
code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records
-----BEGIN PGP SIGNATURE-----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=JEXz
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
RISC-V kernels support 3,4,5-level page tables at runtime by folding
upper levels.
In case of a 3-level page table, PGDIR is folded into P4D which in turn
is folded into PUD: PGDIR_SHIFT value is correctly set to the same value
as PUD_SHIFT, but P4D_SHIFT is not, then any use of P4D_SHIFT will access
invalid address bits (all set to 1).
Fix this by dynamically defining P4D_SHIFT value, like we already do for
PGDIR_SHIFT.
Fixes: d10efa21a9 ("riscv: mm: Control p4d's folding by pgtable_l5_enabled")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221201135128.1482189-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a static assert to ensure a RISCV_ISA_EXT_* enum is never
created with a value >= RISCV_ISA_EXT_MAX. We can do this by
putting RISCV_ISA_EXT_ID_MAX to more work. Before it was
redundant with RISCV_ISA_EXT_MAX and hence only used to
document the limit. Now it grows with the enum and is used to
check the limit.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221201113750.18021-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmOU+U8ACgkQSfxwEqXe
A67NnQ//Y5DltmvibyPd7r1TFT2gUYv+Rx3sUV9ZE1NYptd/SWhhcL8c5FZ70Fuw
bSKCa1uiWjOxosjXT1kGrWq3de7q7oUpAPSOGxgxzoaNURIt58N/ajItCX/4Au8I
RlGAScHy5e5t41/26a498kB6qJ441fBEqCYKQpPLINMBAhe8TQ+NVp0rlpUwNHFX
WrUGg4oKWxdBIW3HkDirQjJWDkkAiklRTifQh/Al4b6QDbOnRUGGCeckNOhixsvS
waHWTld+Td8jRrA4b82tUb2uVZ2/b8dEvj/A8CuTv4yC0lywoyMgBWmJAGOC+UmT
ZVNdGW02Jc2T+Iap8ZdsEmeLHNqbli4+IcbY5xNlov+tHJ2oz41H9TZoYKbudlr6
/ReAUPSn7i50PhbQlEruj3eg+M2gjOeh8OF8UKwwRK8PghvyWQ1ScW0l3kUhPIhI
PdIG6j4+D2mJc1FIj2rTVB+Bg933x6S+qx4zDxGlNp62AARUFYf6EgyD6aXFQVuX
RxcKb6cjRuFkzFiKc8zkqg5edZH+IJcPNuIBmABqTGBOxbZWURXzIQvK/iULqZa4
CdGAFIs6FuOh8pFHLI3R4YoHBopbHup/xKDEeAO9KZGyeVIuOSERDxxo5f/ITzcq
APvT77DFOEuyvanr8RMqqh0yUjzcddXqw9+ieufsAyDwjD9DTuE=
=QRhK
-----END PGP SIGNATURE-----
Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
Palmer Dabbelt <palmer@rivosinc.com> says:
This contains a pair of cleanups that depend on a fix that has already
landed upstream.
* b4-shazam-merge:
RISC-V: Add some comments about the shadow and overflow stacks
RISC-V: Align the shadow stack
riscv: fix race when vmap stack overflow
Link: https://lore.kernel.org/r/20221130023515.20217-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
This series is a collection of cleanups for alternative-macros.h with
the main motivation being that adding new ALTERNATIVE_3, ALTERNATIVE_4,
... will be possible without lots of bloat.
* b4-shazam-merge:
riscv: Don't duplicate _ALTERNATIVE_CFG* macros
riscv: alternatives: Drop the underscores from the assembly macro names
riscv: alternatives: Don't name unused macro parameters
riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
Link: https://lore.kernel.org/r/20221129150053.50464-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
When a DT puts zicbom in the isa string, but does not provide a block
size, ALT_CMO_OP() will attempt to do cache operations on address
zero since the start address will be ANDed with zero. We can't simply
BUG() in riscv_init_cbom_blocksize() when we fail to find a block
size because the failure will happen before logging works, leaving
users to scratch their heads as to why the boot hung. Instead, ensure
Zicbom is disabled and output an error which will hopefully alert
people that the DT needs to be fixed. While at it, add a check that
the block size is a power-of-2 too.
* b4-shazam-merge:
RISC-V: Ensure Zicbom has a valid block size
RISC-V: Introduce riscv_isa_extension_check
RISC-V: Improve use of isa2hwcap[]
Link: https://lore.kernel.org/r/20221129143447.49714-1-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reduce clutter by only defining the _ALTERNATIVE_CFG* macros once,
rather than once for assembly and once for C. To do that, we need to
add __ALTERNATIVE_CFG* macros to the assembly side, but those are
one-liners. Also take the opportunity to do a bit of reformatting,
taking full advantage of the fact checkpatch gives us 100 char lines.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The underscores aren't needed because there isn't anything already
named without them and the _CFG extension. This is a bit of a cleanup
by itself, but the real motivation is for a coming patch which would
otherwise need to add two more underscores to these macro names,
i.e. ____ALTERNATIVE_CFG, and that'd be gross.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Without CONFIG_RISCV_ALTERNATIVE only the first parameter of the
ALTERNATIVE macros is needed. Use ... for the rest to cut down on
clutter. While there, fix a couple space vs. tab issues.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-3-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Build __ALTERNATIVE_CFG_2 by adding on to __ALTERNATIVE_CFG rather
than duplicating it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221129150053.50464-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These are fixes, but due to the possible early boot fallout they're
going in the merge window to get a bit more time to bake on linux-next.
* b4-shazam-merge
riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
riscv: Fix crash during early errata patching
Link: https://lore.kernel.org/r/20221126060920.65009-1-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>