Current implementation keeps userspace input of CPUID configuration and
cpuid->nent even if kvm_update_cpuid() fails. Reset vcpu->arch.cpuid_nent
to 0 for the case of failure as a simple fix.
Besides, update the doc to explicitly state that if IOCTL SET_CPUID*
fail KVM gives no gurantee that previous valid CPUID configuration is
kept.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200708065054.19713-2-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More often than not, a failed VM-entry in an x86 production
environment is induced by a defective CPU. To help identify the bad
hardware, include the id of the last logical CPU to run a vCPU in the
information provided to userspace on a KVM exit for failed VM-entry or
for KVM internal errors not associated with emulation. The presence of
this additional information is indicated by a new capability,
KVM_CAP_LAST_CPU.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Message-Id: <20200603235623.245638-5-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested virtualization
- Nested AMD event injection facelift, building on the rework of generic code
and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page fault
work, will come next week.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7VJcYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPf6QgAq4wU5wdd1lTGz/i3DIhNVJNJgJlp
ozLzRdMaJbdbn5RpAK6PEBd9+pt3+UlojpFB3gpJh2Nazv2OzV4yLQgXXXyyMEx1
5Hg7b4UCJYDrbkCiegNRv7f/4FWDkQ9dx++RZITIbxeskBBCEI+I7GnmZhGWzuC4
7kj4ytuKAySF2OEJu0VQF6u0CvrNYfYbQIRKBXjtOwuRK4Q6L63FGMJpYo159MBQ
asg3B1jB5TcuGZ9zrjL5LkuzaP4qZZHIRs+4kZsH9I6MODHGUxKonrkablfKxyKy
CFK+iaHCuEXXty5K0VmWM3nrTfvpEjVjbMc7e1QGBQ5oXsDM0pqn84syRg==
=v7Wn
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
set from Mauro toward the completion of the RST conversion. I *really*
hope we are getting close to the end of this. Meanwhile, those patches
reach pretty far afield to update document references around the tree;
there should be no actual code changes there. There will be, alas, more of
the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots of
fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7VId8PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yq/gH/iaDgirQZV6UZ2v9sfwQNYolNpf2sKAuOZjd
bPFB7WJoMQbKwQEvYrAUL2+5zPOcLYuIfzyOfo1BV1py+EyKbACcKjI4AedxfJF7
+NchmOBhlEqmEhzx2U08HRc4/8J223WG17fJRVsV3p+opJySexSFeQucfOciX5NR
RUCxweWWyg/FgyqjkyMMTtsePqZPmcT5dWTlVXISlbWzcv5NFhuJXnSrw8Sfzcmm
SJMzqItv3O+CabnKQ8kMLV2PozXTMfjeWH47ZUK0Y8/8PP9+cvqwFzZ0UDQJ1Xaz
oyW/TqmunaXhfMsMFeFGSwtfgwRHvXdxkQdtwNHvo1dV4dzTvDw=
=fDC/
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
-----BEGIN PGP SIGNATURE-----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=aD+9
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.8:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
Add support for Hyper-V synthetic debugger (syndbg) interface.
The syndbg interface is using MSRs to emulate a way to send/recv packets
data.
The debug transport dll (kdvm/kdnet) will identify if Hyper-V is enabled
and if it supports the synthetic debugger interface it will attempt to
use it, instead of trying to initialize a network adapter.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200529134543.1127440-4-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new field to hold preemption timer expiration deadline
appended to struct kvm_vmx_nested_state_hdr. This is to prevent
the first VM-Enter after migration from incorrectly restarting the timer
with the full timer value instead of partially decayed timer value.
KVM_SET_NESTED_STATE restarts timer using migrated state regardless
of whether L1 sets VM_EXIT_SAVE_VMX_PREEMPTION_TIMER.
Fixes: cf8b84f48a ("kvm: nVMX: Prepare for checkpointing L2 state")
Signed-off-by: Peter Shier <pshier@google.com>
Signed-off-by: Makarand Sonare <makarandsonare@google.com>
Message-Id: <20200526215107.205814-2-makarandsonare@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.
In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.
This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.
The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.
As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424113746.3473563-2-arilou@gmail.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce new capability to indicate that KVM supports interrupt based
delivery of 'page ready' APF events. This includes support for both
MSR_KVM_ASYNC_PF_INT and MSR_KVM_ASYNC_PF_ACK.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If two page ready notifications happen back to back the second one is not
delivered and the only mechanism we currently have is
kvm_check_async_pf_completion() check in vcpu_run() loop. The check will
only be performed with the next vmexit when it happens and in some cases
it may take a while. With interrupt based page ready notification delivery
the situation is even worse: unlike exceptions, interrupts are not handled
immediately so we must check if the slot is empty. This is slow and
unnecessary. Introduce dedicated MSR_KVM_ASYNC_PF_ACK MSR to communicate
the fact that the slot is free and host should check its notification
queue. Mandate using it for interrupt based 'page ready' APF event
delivery.
As kvm_check_async_pf_completion() is going away from vcpu_run() we need
a way to communicate the fact that vcpu->async_pf.done queue has
transitioned from empty to non-empty state. Introduce
kvm_arch_async_page_present_queued() and KVM_REQ_APF_READY to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Concerns were expressed around APF delivery via synthetic #PF exception as
in some cases such delivery may collide with real page fault. For 'page
ready' notifications we can easily switch to using an interrupt instead.
Introduce new MSR_KVM_ASYNC_PF_INT mechanism and deprecate the legacy one.
One notable difference between the two mechanisms is that interrupt may not
get handled immediately so whenever we would like to deliver next event
(regardless of its type) we must be sure the guest had read and cleared
previous event in the slot.
While on it, get rid on 'type 1/type 2' names for APF events in the
documentation as they are causing confusion. Use 'page not present'
and 'page ready' everywhere instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is already support of enabling dirty log gradually in small chunks
for x86 in commit 3c9bd4006b ("KVM: x86: enable dirty log gradually in
small chunks"). This adds support for arm64.
x86 still writes protect all huge pages when DIRTY_LOG_INITIALLY_ALL_SET
is enabled. However, for arm64, both huge pages and normal pages can be
write protected gradually by userspace.
Under the Huawei Kunpeng 920 2.6GHz platform, I did some tests on 128G
Linux VMs with different page size. The memory pressure is 127G in each
case. The time taken of memory_global_dirty_log_start in QEMU is listed
below:
Page Size Before After Optimization
4K 650ms 1.8ms
2M 4ms 1.8ms
1G 2ms 1.8ms
Besides the time reduction, the biggest improvement is that we will minimize
the performance side effect (because of dissolving huge pages and marking
memslots dirty) on guest after enabling dirty log.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200413122023.52583-1-zhukeqian1@huawei.com
0x4b564d00 and 0x4b564d01 belong to KVM_FEATURE_CLOCKSOURCE2.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200416155913.267562-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a rewrite of this[1] Wiki page with further enhancements. The
doc also includes a section on debugging problems in nested
environments, among other improvements.
[1] https://www.linux-kvm.org/page/Nested_Guests
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200505112839.30534-1-kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_KVMCLOCK_CTRL ioctl signals to supported KVM guests
that the hypervisor has paused it. Update the documentation to
reflect that the guest is notified by this API.
Signed-off-by: Joshua Abraham <sinisterpatrician@gmail.com>
Link: https://lore.kernel.org/r/20200501223624.GA25826@josh-ZenBook
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This fixes
Documentation/virt/kvm/amd-memory-encryption.rst:76: WARNING: Inline literal start-string without end-string.
Fixes: 2da1ed62d5 ("KVM: SVM: document KVM_MEM_ENCRYPT_OP, let userspace detect if SEV is available")
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200424152637.120876-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
KVM_CAP_HALT_POLL is a per-VM capability that lets userspace
control the halt-polling time, allowing halt-polling to be tuned or
disabled on particular VMs.
With dynamic halt-polling, a VM's VCPUs can poll from anywhere from
[0, halt_poll_ns] on each halt. KVM_CAP_HALT_POLL sets the
upper limit on the poll time.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200417221446.108733-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove all references to cr3_target_value[0-3] and replace the fields
in vmcs12 with "dead_space" to preserve the vmcs12 layout. KVM doesn't
support emulating CR3-target values, despite a variety of code that
implies otherwise, as KVM unconditionally reports '0' for the number of
supported CR3-target values.
This technically fixes a bug where KVM would incorrectly allow VMREAD
and VMWRITE to nonexistent fields, i.e. cr3_target_value[0-3]. Per
Intel's SDM, the number of supported CR3-target values reported in
VMX_MISC also enumerates the existence of the associated VMCS fields:
If a future implementation supports more than 4 CR3-target values, they
will be encoded consecutively following the 4 encodings given here.
Alternatively, the "bug" could be fixed by actually advertisting support
for 4 CR3-target values, but that'd likely just enable kvm-unit-tests
given that no one has complained about lack of support for going on ten
years, e.g. KVM, Xen and HyperV don't use CR3-target values.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200416000739.9012-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several references got broken due to txt to ReST conversion.
Several of them can be automatically fixed with:
scripts/documentation-file-ref-check --fix
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt
Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT
Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJegnq3AAoJEJ2a6ncsY3GfrU8IANpaxS7kTAsW3ZN0wJnP2PHq
i8j7ZPlCVLpkQWArrMyMimDLdiN9VP7lvaWonAWjG0HJrxlmMUUVnwVSMuPTXhWY
vSwEqhUXwSF5KKxN7DYkgxqaKFxkElJIubVE/AYJjH9zFpu9ca4vM5sCxnzWcvS3
hxPNe756nKhFH9xhrC/9NRUZWmDAiv75wvzq+5DRKbSVPJGJugchdIPBbi3Yrr7P
qxnUCPZdCxzXXU94bfQl038wrjSMR3S7b4FvekJ12go2FalujqzsL2lVtift4Rf0
jvu+RIINcmTiaQqclY332j7l24LZ6Pni456RygT5OwFxuYoxWKZRafN16JmaMCo=
=rpJL
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM PPC update for 5.7
* Add a capability for enabling secure guests under the Protected
Execution Framework ultravisor
* Various bug fixes and cleanups.
- return the proper error to userspace when a signal interrupts the
KSM unsharing operation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Wf8x
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix for error codes
- return the proper error to userspace when a signal interrupts the
KSM unsharing operation
If a signal is pending we might return -ENOMEM instead of -EINTR.
We should propagate the proper error during KSM unsharing.
unmerge_ksm_pages returns -ERESTARTSYS on signal_pending. This gets
translated by entry.S to -EINTR. It is important to get this error
code so that userspace can retry.
To make this clearer we also add -EINTR to the documentation of the
PV_ENABLE call, which calls unmerge_ksm_pages.
Fixes: 3ac8e38015 ("s390/mm: disable KSM for storage key enabled pages")
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
At present, on Power systems with Protected Execution Facility
hardware and an ultravisor, a KVM guest can transition to being a
secure guest at will. Userspace (QEMU) has no way of knowing
whether a host system is capable of running secure guests. This
will present a problem in future when the ultravisor is capable of
migrating secure guests from one host to another, because
virtualization management software will have no way to ensure that
secure guests only run in domains where all of the hosts can
support secure guests.
This adds a VM capability which has two functions: (a) userspace
can query it to find out whether the host can support secure guests,
and (b) userspace can enable it for a guest, which allows that
guest to become a secure guest. If userspace does not enable it,
KVM will return an error when the ultravisor does the hypercall
that indicates that the guest is starting to transition to a
secure guest. The ultravisor will then abort the transition and
the guest will terminate.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
That's it. Remove all references to KVM itself, and document
that although it is no more, the ABI between SVC and HYP still
exists.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Userspace has no way to query if SEV has been disabled with the
sev module parameter of kvm-amd.ko. Actually it has one, but it
is a hack: do ioctl(KVM_MEM_ENCRYPT_OP, NULL) and check if it
returns EFAULT. Make it a little nicer by returning zero for
SEV enabled and NULL argument, and while at it document the
ioctl arguments.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=x6Hn
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Features and Enhancements for 5.7 part1
1. Allow to disable gisa
2. protected virtual machines
Protected VMs (PVM) are KVM VMs, where KVM can't access the VM's
state like guest memory and guest registers anymore. Instead the
PVMs are mostly managed by a new entity called Ultravisor (UV),
which provides an API, so KVM and the PV can request management
actions.
PVMs are encrypted at rest and protected from hypervisor access
while running. They switch from a normal operation into protected
mode, so we can still use the standard boot process to load a
encrypted blob and then move it into protected mode.
Rebooting is only possible by passing through the unprotected/normal
mode and switching to protected again.
One mm related patch will go via Andrews mm tree ( mm/gup/writeback:
add callbacks for inaccessible pages)
Clarify locking.rst to mention early that we're not enabling fast page
fault for indirect sps. The previous wording is confusing, in that it
seems the proposed solution has been already implemented but it has not.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the code for handling stateful CPUID 0x2 and mark the associated
flags as deprecated. WARN if host CPUID 0x2.0.AL > 1, i.e. if by some
miracle a host with stateful CPUID 0x2 is encountered.
No known CPU exists that supports hardware accelerated virtualization
_and_ a stateful CPUID 0x2. Barring an extremely contrived nested
virtualization scenario, stateful CPUID support is dead code.
Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It could take kvm->mmu_lock for an extended period of time when
enabling dirty log for the first time. The main cost is to clear
all the D-bits of last level SPTEs. This situation can benefit from
manual dirty log protect as well, which can reduce the mmu_lock
time taken. The sequence is like this:
1. Initialize all the bits of the dirty bitmap to 1 when enabling
dirty log for the first time
2. Only write protect the huge pages
3. KVM_GET_DIRTY_LOG returns the dirty bitmap info
4. KVM_CLEAR_DIRTY_LOG will clear D-bit for each of the leaf level
SPTEs gradually in small chunks
Under the Intel(R) Xeon(R) Gold 6152 CPU @ 2.10GHz environment,
I did some tests with a 128G windows VM and counted the time taken
of memory_global_dirty_log_start, here is the numbers:
VM Size Before After optimization
128G 460ms 10ms
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add documentation about protected KVM guests and description of changes
that are necessary to move a KVM VM into Protected Virtualization mode.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: fixing and conversion to rst]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A lot of the registers are controlled by the Ultravisor and never
visible to KVM. Some fields in the sie control block are overlayed, like
gbea. As no known userspace uses the ONE_REG interface on s390 if sync
regs are available, no functionality is lost if it is disabled for
protected guests.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[borntraeger@de.ibm.com: patch merging, splitting, fixing]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The adapter interrupt page containing the indicator bits is currently
pinned. That means that a guest with many devices can pin a lot of
memory pages in the host. This also complicates the reference tracking
which is needed for memory management handling of protected virtual
machines. It might also have some strange side effects for madvise
MADV_DONTNEED and other things.
We can simply try to get the userspace page set the bits and free the
page. By storing the userspace address in the irq routing entry instead
of the guest address we can actually avoid many lookups and list walks
so that this variant is very likely not slower.
If userspace messes around with the memory slots the worst thing that
can happen is that we write to some other memory within that process.
As we get the the page with FOLL_WRITE this can also not be used to
write to shared read-only pages.
Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[borntraeger@de.ibm.com: patch simplification]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We also need to rstify the new ioctls that we added in parallel to the
rstification of the kvm docs.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to some merge conflict, this file ended being alone under
Documentation/virtual.
The file itself is almost at ReST format. Just minor
adjustments are needed:
- Adjust title markup;
- Adjust a list identation;
- add a literal block markup;
- Add some blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is already in ReST compatible format.
So, rename it and add to the kvm's index.rst.
While here, use the standard conversion for document titles.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- Add markups for tables;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just one change was
needed:
- Add markups for a literal block and change its indentation.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Use list markups;
- Add markups for literal blocks;
- Add blank lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This file is almost in ReST format. Just a small set of
changes were needed:
- Add markups for lists;
- Add markups for a literal block;
- Adjust whitespaces.
While here, use the standard markup for the document title.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for tables;
- Add markups for literal blocks;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add a title for the document;
- Adjust whitespaces for it to be properly formatted after
parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add proper markups for titles;
- Adjust whitespaces and blank lines to match ReST
needs;
- Mark literal blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
convert api.txt document to ReST format while trying to keep
its format as close as possible with the authors intent, and
avoid adding uneeded markups.
- Use document title and chapter markups;
- Convert tables;
- Add markups for literal blocks;
- use :field: for field descriptions;
- Add blank lines and adjust indentation
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- use :field: markups;
- Use cross-references;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use standard title markup;
- adjust lists;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- adjust indentation and add blank lines as needed;
- adjust tables to match ReST accepted formats;
- use :field: markups;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use standard markup for document title;
- Adjust indentation and add blank lines as needed;
- use the notes markup;
- mark code blocks as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This document is almost in ReST format. The only thing
needed is to mark a list as such and to add an extra
whitespace.
Yet, let's also use the standard document title markup,
as it makes easier if anyone wants later to add sessions
to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use title markups;
- change indent to match ReST syntax;
- use proper table markups;
- use literal block markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix document title to match ReST format
- Convert the table to be properly recognized
- use proper markups for literal blocks
- Some indentation fixes to match ReST
While here, add an index for kvm devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix document title to match ReST format
- Convert the table to be properly recognized
- Some indentation fixes to match ReST syntax.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several URLs are pointing to outdated places.
Update the references for the URLs whose contents still exists,
removing the others.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of pointing for a pre-2.4 and a seaparate patch,
update it to match current upstream, as UML was merged
a long time ago.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite being an old document, it contains lots of information
that could still be useful.
The document has a nice style with makes easy to convert to
ReST. So, let's convert it to ReST.
This patch does:
- Use proper markups for titles;
- Mark and proper indent literal blocks;
- don't use an 'o' character for lists;
- other minor changes required for the doc to be parsed.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add this file to a new kvm/arm index.rst, in order for it to
be shown as part of the virt book.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The architecture states that we need to reset local IRQs for all CPU
resets. Because the old reset interface did not support the normal CPU
reset we never did that on a normal reset.
Let's implement an interface for the missing normal and clear resets
and reset all local IRQs, registers and control structures as stated
in the architecture.
Userspace might already reset the registers via the vcpu run struct,
but as we need the interface for the interrupt clearing part anyway,
we implement the resets fully and don't rely on userspace to reset the
rest.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20200131100205.74720-4-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Two UAPI system register IDs do not derive their values from the
ARM system register encodings. This is because their values were
accidentally swapped. As the IDs are API, they cannot be changed.
Add WARNING notes to point them out.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: turned XXX into WARNING]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200120130825.28838-1-drjones@redhat.com
Framework (PEF) Ultravisor on POWER.
This enables secure memory to be represented as device memory,
which provides a way for the host to keep track of which pages of a
secure guest have been moved into secure memory managed by the
ultravisor and are no longer accessible by the host, and manage
movement of pages between secure and normal memory.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv0VLfXa2m9eKuaRpnZrqdyxjcZ8FAl3gVG0ACgkQnZrqdyxj
cZ/X9wf/c6SlKCQFp8Vmg8zFcnqH+HkUvPUx8mFmxR9tgZbG4Q3tFSAPVorf6S6w
5wFcxOYaF/FdQIExpO7k+oCQTiD5/9kIjgH47MDxrCC2g+eKaZvMfmNWTBBEE/ER
PsFfK1qElqWZUjohzE8L8f8cITOhAStqzI2eS9lpBDwabjLFcqNanP6HOh4g3hsn
JYrBru3tUS4YBUrEg5/lZFHIkSazeHQiQ9oOvbN1vB4wtcxiOD/XZkvyr05DPESc
4LItYATT0EQBK5aGvrFGKDny4o/PIJuUypkP8a6JzHXLoXeKCgPjwxfmoOPMhHrw
OwWiKIcZYNOj7JiWBABuNPPdpUt8xw==
=+E+S
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-uvmem-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
KVM: Add support for secure guests under the Protected Execution
Framework (PEF) Ultravisor on POWER.
This enables secure memory to be represented as device memory,
which provides a way for the host to keep track of which pages of a
secure guest have been moved into secure memory managed by the
ultravisor and are no longer accessible by the host, and manage
movement of pages between secure and normal memory.
In api.txt it is said that KVM ioctls belong to three classes
but in reality it is four. Fixed this, but do not count categories
anymore to avoid such as outdated information in the future.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for reset of secure guest via a new ioctl KVM_PPC_SVM_OFF.
This ioctl will be issued by QEMU during reset and includes the
the following steps:
- Release all device pages of the secure guest.
- Ask UV to terminate the guest via UV_SVM_TERMINATE ucall
- Unpin the VPA pages so that they can be migrated back to secure
side when guest becomes secure again. This is required because
pinned pages can't be migrated.
- Reinit the partition scoped page tables
After these steps, guest is ready to issue UV_ESM call once again
to switch to secure mode.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
[Implementation of uv_svm_terminate() and its call from
guest shutdown path]
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
[Unpinning of VPA pages]
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
-----BEGIN PGP SIGNATURE-----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=SxBH
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for Linux 5.5:
- Allow non-ISV data aborts to be reported to userspace
- Allow injection of data aborts from userspace
- Expose stolen time to guests
- GICv4 performance improvements
- vgic ITS emulation fixes
- Simplify FWB handling
- Enable halt pool counters
- Make the emulated timer PREEMPT_RT compliant
Conflicts:
include/uapi/linux/kvm.h
Add a new attribute to both XIVE and XICS-on-XIVE KVM devices so that
userspace can tell how many interrupt servers it needs. If a VM needs
less than the current default of KVM_MAX_VCPUS (2048), we can allocate
less VPs in OPAL. Combined with a core stride (VSMT) that matches the
number of guest threads per core, this may substantially increases the
number of VMs that can run concurrently with an in-kernel XIVE device.
Since the legacy XIVE KVM device is exposed to userspace through the
XICS KVM API, a new attribute group is added to it for this purpose.
While here, fix the syntax of the existing KVM_DEV_XICS_GRP_SOURCES
in the XICS documentation.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Introduce a paravirtualization interface for KVM/arm64 based on the
"Arm Paravirtualized Time for Arm-Base Systems" specification DEN 0057A.
This only adds the details about "Stolen Time" as the details of "Live
Physical Time" have not been fully agreed.
User space can specify a reserved area of memory for the guest and
inform KVM to populate the memory with information on time that the host
kernel has stolen from the guest.
A hypercall interface is provided for the guest to interrogate the
hypervisor's support for this interface and the location of the shared
memory structures.
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In some scenarios, such as buggy guest or incorrect configuration of the
VMM and firmware description data, userspace will detect a memory access
to a portion of the IPA, which is not mapped to any MMIO region.
For this purpose, the appropriate action is to inject an external abort
to the guest. The kernel already has functionality to inject an
external abort, but we need to wire up a signal from user space that
lets user space tell the kernel to do this.
It turns out, we already have the set event functionality which we can
perfectly reuse for this.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:
load/store instruction decoding not implemented
The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.
However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice. It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more. It doesn't appear likely that we'll ever implement
this in the kernel.
What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space. In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.
It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.
This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace. User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When calling the KVM_SET_GUEST_DEBUG ioctl, userspace might request
the next instruction to be single stepped via the
KVM_GUESTDBG_SINGLESTEP control bit of the kvm_guest_debug structure.
This patch adds the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability in order
to inform userspace about the state of single stepping support.
We currently don't have support for guest single stepping implemented
in Book3S HV so the capability is only present for Book3S PR and
BookE.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Hyper-V direct tlb flush function should be enabled for
guest that only uses Hyper-V hypercall. User space
hypervisor(e.g, Qemu) can disable KVM identification in
CPUID and just exposes Hyper-V identification to make
sure the precondition. Add new KVM capability KVM_CAP_
HYPERV_DIRECT_TLBFLUSH for user space to enable Hyper-V
direct tlb function and this function is default to be
disabled in KVM.
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Userspace can use ioctl KVM_SET_MSRS to update a set of MSRs of guest.
This ioctl set specified MSRs one by one. If it fails to set an MSR,
e.g., due to setting reserved bits, the MSR is not supported/emulated by
KVM, etc..., it stops processing the MSR list and returns the number of
MSRs have been set successfully.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- New ITS translation cache
- Allow up to 512 CPUs to be supported with GICv3 (for real this time)
- Now call kvm_arch_vcpu_blocking early in the blocking sequence
- Tidy-up device mappings in S2 when DIC is available
- Clean icache invalidation on VMID rollover
- General cleanup
-----BEGIN PGP SIGNATURE-----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=0dD/
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm updates for 5.4
- New ITS translation cache
- Allow up to 512 CPUs to be supported with GICv3 (for real this time)
- Now call kvm_arch_vcpu_blocking early in the blocking sequence
- Tidy-up device mappings in S2 when DIC is available
- Clean icache invalidation on VMID rollover
- General cleanup
- Some prep for extending the uses of the rmap array
- Various minor fixes
- Commits from the powerpc topic/ppc-kvm branch, which fix a problem
with interrupts arriving after free_irq, causing host hangs and crashes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJdZwd7AAoJEJ2a6ncsY3GffDQH/2q+c2z56ZO2lzfk4Hy9piWn
Z9PR9n72Z6TiMyVCl7CtLCyI+lRy3QVZnol14ugQNX4aFJiiwDGRHJF0wNxjeok4
4DAIqBc60qD2dkp1LwtUM1YsLsr/n3tdrGU1b0VrHGoGTVhJDpbjhJsblXZ1ujGr
KxQ1Uf4XsW5T7kovHuzj+FFlbB5nbEX5cBIU68maBGZSCl355wCOW35rKVITTIIv
+VKkO2aNbk6bRmZmOi2v1D65eQa2+TKe/o48TneJv1WhL4h4hDyHdmVeWRNoAI6C
ve8mwCAVs7IITjCJ1qcGnI8NzVxMlXgwVir7sQ1aslRLZfeRAm5FOIPNEz1ADXs=
=3oLd
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM update for 5.4
- Some prep for extending the uses of the rmap array
- Various minor fixes
- Commits from the powerpc topic/ppc-kvm branch, which fix a problem
with interrupts arriving after free_irq, causing host hangs and crashes.
While parts of the VGIC support a large number of vcpus (we
bravely allow up to 512), other parts are more limited.
One of these limits is visible in the KVM_IRQ_LINE ioctl, which
only allows 256 vcpus to be signalled when using the CPU or PPI
types. Unfortunately, we've cornered ourselves badly by allocating
all the bits in the irq field.
Since the irq_type subfield (8 bit wide) is currently only taking
the values 0, 1 and 2 (and we have been careful not to allow anything
else), let's reduce this field to only 4 bits, and allocate the
remaining 4 bits to a vcpu2_index, which acts as a multiplier:
vcpu_id = 256 * vcpu2_index + vcpu_index
With that, and a new capability (KVM_CAP_ARM_IRQ_LINE_LAYOUT_2)
allowing this to be discovered, it becomes possible to inject
PPIs to up to 4096 vcpus. But please just don't.
Whilst we're there, add a clarification about the use of KVM_IRQ_LINE
on arm, which is not completely conditionned by KVM_CAP_IRQCHIP.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Explicitly specify the valid ranges for size and ar, and reword
buf requirements a bit.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20190829124746.28665-1-cohuck@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rename "access" to "mmio_access" to match the other MMIO cache members
and to make it more obvious that it's tracking the access permissions
for the MMIO cache.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
from the massive RST conversion; a few other small fixes as well.
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl07C9gPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YQrgH+L7kPaRWcH+lorh7WxiIhlAvqFsR4xjRKTZV
qZwlv3+87qjPu86DBdjRlos8PsoIkdD4+jH0u+7swYtZ5hsS8DYcfZ42i+nHqP7D
k/XwVPW71ikpoi4vQVsO9zrwaOKPyL8AoNzlj+VpiVGAu/PYApGUfdkdOD0xxlOW
hst6GKNAKrsoQ8fW3AIuCVi4oEEYru2FHMKLcpHBFDZtR7zgC4dEgs7UqEttAzHU
559nkH2LKekya4pQaFMdSb6Wgj+JeIkI2XzujXES6QEdmf8vrvjkkvHeByoOYjNY
NNdKNGhPUWrEUMfyzRQpEIcF+Dk3lYtBEDQO8+XCh6mpa9h7kQ==
=BUU+
-----END PGP SIGNATURE-----
Merge tag 'docs-5.3-1' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
