To disable AGP, the start needs to be set to a higher
value than the end. Set a default disable value for
the AGP aperture and allow the IP specific GMC code
to enable it selectively be calling amdgpu_gmc_agp_location().
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The BOT register needs to be larger than the TOP register
for this to be properly disabled. The lower 22 bits
of the BOT address are always 0 and the lower 22 bits of
the TOP register are always 1 so you need to make
the upper bits of BOT larger than the upper bits of BOT.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This identifies the physical ordering of devices in the hive
v2: fix compilation issue
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
After repopulating pipes for a split / merge, we want to find the
lowest vlevel that supports the desired mpc combine level.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Change to new interface for notifying OS of cursor support changes
Reviewed-by: Gang Chu <gang.chu@amd.com>
Reviewed-by: Jaina Han <jaina.han@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hong-lu Cheng <hong-lu.cheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow dc report maximum display clock possible at vmin
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Fix incorrect odm change detection logic
- Add primary pipe check when building slice table for dcn3x
- Add get primary dpp pipe resource interface
- Add missing function pointer for DCN321 resource
- Rename DisableMinDispClkODM in dc_config
- Break after finding supported vlevel for repopulate
- Update OPP counter from new interface
- Augment display clock in dc_cap structure
- Improve code style on bios_parser2
- Skip audio config for virtual signal
- Block MPO if it prevents pstate support
- Fix DP2.0 timing sync
- Improve x86 and dmub ips handshake
- Remove guaranteed viewports limitation for odm
- Add new windowed mpo odm minimal transition sequence
- Reset stream slice count for new ODM policy
- Determine fast update only before commit minimal transition state
- Remove unused mmhub_reg_offsets
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The current ODM change detection only compares first two ODM slices.
If there are 4 ODM slices and the change is within the last two slices, the
logic fails to detect ODM change and cause us to skip ODM programming
unexpectedly.
[how]
Add a is ODM topology changed resource interface to check any ODM
topology changes with a more generic method.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There is a corner use case where the same plane pointer can be added into
dc state twice. In addition to plane state pointer check we also need to match
primary pipe before identifying the same plane.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to have a helper function to find the primary dp pipe of the plane
associated with a dpp pipe
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
acquire_free_pipe_as_secondary_opp_head function pointer is not
assigned. This causes ODM mode to be disabled after enabling
windowed MPO ODM capability on DCN321.
[how]
assign the correct function to the function pointer.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what and why]
The logic for DisableMinDispClkODM is reversed now that odm is
disabled by default. Renaming to EnableMinDispClkODM.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
bios_parser2 uses space instead of tabs in multiple areas; this commit
converts those spaces into tabs. It also removes some other small
details.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
edid_override and drm_edid_override_connector_update, according to drm
documentation, should not be referred outside drm_edid.
[HOW]
Remove and replace them accordingly. This can tested by IGT's
kms_hdmi_inject test.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For multi-GPU systems it is difficult to tell which GPU a particular
message is being printed for and that is undesirable because it
complicates debugging efforts. Also, the new macros allow us to enable
logging for particular parts of the codebase more selectively (since we
no longer need to throw everything at DRM_DEBUG_KMS()). So, for the
reasons outlined above we should switch to the new macros.
We can accomplish this by using the existing DC_LOGGER code to pass
around the relevant `struct drm_device` which will be fed to the new
macros in logger_types.h. Also, we must get rid of all instances of the
DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use
the DC logger there and we can simply refer to the macros directly
there instead.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
IGT's kms_hdmi_inject (subtest inject_audio) triggers a warning message
from dce_aud_az_configure. This can be fixed by checking Virtual signal
that does not need to configure AZ audio since it does not have any.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add reset option for fan_curve.
User can use command "echo r > fan_cure" to reset the fan_curve
to boot value
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change adds a method to block mpo when it would cause us to
exit pstate support. We should block mpo by default where MPO
causes issues by preventing pstate change.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Triggering OTG sync before all OTG/HPO clock programming is complete
causes timing sync to fail and a subsequent P-state hang.
[How]
Move DTB clock programming earlier in the sequence to
enable_stream_timing.
Reviewed-by: Ariel Bernstein <eric.bernstein@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a race condition between x86 and dmcub fw when attempting to exit
IPS2. Scenarios including exiting IPS2 before IPS2 has been entered. This
can cause unexpected hang when DMCUB attempt to exit while PMFW still
tries to enter IPS2.
[How]
A new design has been introduced to remove race conditions and improve the
handshake between x86 and DMCUB. An AON scratch register is borrowed from
PMFW to determine whether DMCUB has committed to IPS entry or not.
In the case when dmcub has committed IPS entry, x86 must poll until an exit
event occurred either from DMCUB(IPS1) or PMFW(IPS2). x86 will wait
upperbound of evaluation and IPS entry time to ensure IPS2 exit event has
been sent to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With the more generic hw minimal state transition sequence,
this limitation has been overcome.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We do not have a programming sequence to support seamless transition
between MPC combine to ODM combine when plane count remains the same.
This can happen with windowed MPO ODM use cases when plane scaling
is changed over ODM Combine's capability.
[How]
We are adding a programming sequence specifically to handle the transition
between MPC combine and ODM combine during plane scaling change.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ODM combine could prevent us from supporting more planes
we will reset ODM slice count back to 1 when all planes have
been removed to maximize the amount of planes supported when
new planes are added.
[how]
reset ODM slice count when all planes are removed.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
commit minimal transition state would update current
state to new state with surface and stream update
applied. If we determine fast update only after we
have committed the minimal transition state based on
new state, we will skip committing the full new state.
[how]
determine fast update only earlier based on the
actaul currents state. Only skip full commit when
the transition between actual current state and new
state is fast update only.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
mmhub_reg_offsets never used in code. Remove it.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes:
1: ref number of prange's svm_bo got decreased by an async call from hmm. When
wait svm_bo of prange got released we shoul also wait prang->svm_bo become NULL,
otherwise prange->svm_bo may be set to null after allocate new vram buffer.
2: During waiting svm_bo of prange got released in a while loop should reschedule
current task to give other tasks oppotunity to run, specially the the workque
task that handles svm_bo ref release, otherwise we may enter to softlock.
Signed-off-by: Xiaogang.Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise GPU may access the stale mapping and generate IOMMU
IO_PAGE_FAULT.
Move this to inside p->mutex to prevent multiple threads mapping and
unmapping concurrently race condition.
After kfd_mem_dmaunmap_attachment is removed from unmap_bo_from_gpuvm,
kfd_mem_dmaunmap_attachment is called if failed to map to GPUs, and
before free the mem attachment in case failed to unmap from GPUs.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the PASID flushing we already handled that at a higher layer, apply
those workarounds to the standard flush as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of each implementation doing this more or less correctly
move taking the reset lock at a higher level.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That function never fails, drop the error return.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same PASID can be used by more than one VMID, reset each of them.
Use the common KIQ handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The same PASID can be used by more than one VMID, reset each of them.
Use the common KIQ handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing for reset is pointless since the reset can start right after the
test.
The same PASID can be used by more than one VMID, invalidate each of them.
Move the KIQ and all the workaround handling into common GMC code.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.
The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Testing for reset is pointless since the reset can start right after the
test. Grab the reset semaphore instead.
The same PASID can be used by more than once VMID, build a mask of VMIDs
to invalidate instead of just restting the first one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove leftovers from copying this from the gmc v10 code.
v2: squash in fix from Yifan
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the SDMA workaround necessary for Navi 1x into a higher layer.
v2: use dev_err
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_ras_eeprom_control.bad_channel_bitmap is u32 type, but the
channel index could be larger than 32. For the ASICs whose channel
number is more than 32, the amdgpu_dpm_send_hbm_bad_channel_flag
interface is not supported, so we simply bypass channel bitmap update under
this condition.
v2: replace sizeof with BITS_PER_TYPE, we should check bit number
instead of byte number.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for bad page retirement.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes a few style issues:
- Only calculate the dto_params and dp_hpo_inst when dccg is present.
- Fix indentation
- Drop empty else block
Fixes: 7f7925e258 ("drm/amd/display: Fix MST recognizes connected displays as one")
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If retry cam enabled, we don't use sw retry fault filter and add fault
into sw filter ring, so we shouldn't remove fault from sw filter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KIQ code path was ignoring the second flush. Also avoid long lines and
re-calculating the register offsets over and over again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix kernel-doc warnings discovered in AMD gpu display driver.
Fixes these warnings:
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'overlap_only'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'bottom_gain_mode'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110: warning:
Function parameter or member 'background_color_bpc'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'top_gain'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_inside_gain'
not described in 'mpcc_blnd_cfg'.
./drivers/gpu/drm/amd/display/dc/inc/hw/mpc.h:110:
warning: Function parameter or member 'bottom_outside_gain'
not described in 'mpcc_blnd_cfg'.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On GFX v9.4.3 dGPU, applications have random timeout failure when XNACK
on, dmesg log has "amdgpu: IH soft ring buffer overflow 0x900, 0x900",
because dGPU mode has 272 cam entries. After increasing IH soft ring
to 512 entries, no more IH soft ring overflow message and application
passed.
Fixes: bf80d34b6c ("drm/amdgpu: Increase soft IH ring size")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On a full device reset, PSP FW gets unloaded. Hence restore the
partition mode by placing a new request.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Use optc32 instead of optc30 in DC
- Optimize OLED T7 delay
- Multiple fixes for MST, register mas, and others
- Update driver and IPS interop
- Improve z8 watermark mask
- DCN35 updates
- Enable replay for DCN35
- Temporarily disable clock gating
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are multiple parts of the code that DC does not use anymore, and
this commit drops those dead codes.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DCN low mem power by default.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
