pm_runtime_get_sync() will increment pm usage at first and it
will resume the device later. If runtime of the device has
error or device is in inaccessible state(or other error state),
resume operation will fail. If we do not call put operation to
decrease the reference, the result is that this device cannot
enter the idle state and always stay busy or other non-idle
state.
Fixes: 249fa8217b ("USB: Add driver to control USB fast charge for iOS devices")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201102022650.67115-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Bastien Nocera <hadess@hadess.net>
Contrary to the comment above the id table, we didn't implement a match
function. This meant that every single Apple device that was already
plugged in to the computer would have its device driver reprobed
when the apple-mfi-fastcharge driver was loaded, eg. the SD card reader
could be reprobed when the apple-mfi-fastcharge after pivoting root
during boot up and the module became available.
Make sure that the driver probe isn't being run for unsupported
devices by adding a match function that checks the product ID, in
addition to the id_table checking the vendor ID.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878347
Link: https://lore.kernel.org/linux-usb/CAE3RAxt0WhBEz8zkHrVO5RiyEOasayy1QUAjsv-pB0fAbY1GSw@mail.gmail.com/
Fixes: 249fa8217b ("USB: Add driver to control USB fast charge for iOS devices")
Cc: <stable@vger.kernel.org> # 5.8
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
[m.v.b: Add Link and Reported-by tags to the commit message]
Reported-by: Pany <pany@fedoraproject.org>
Tested-by: Pan (Pany) YUAN <pany@fedoraproject.org>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Link: https://lore.kernel.org/r/20201022135521.375211-3-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_recv() function can handle data on the stack, as
well as properly detecting short reads, so move to use that function
instead of the older usb_control_msg() call. This ends up removing a
lot of extra lines in the driver.
v2: change API of usb_control_msg_send()
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Link: https://lore.kernel.org/r/20200914153756.3412156-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200923134348.23862-12-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_control_msg_recv() function can handle data on the stack, as
well as properly detecting short reads, so move to use that function
instead of the older usb_control_msg() call. This ends up removing a
lot of extra lines in the driver.
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Link: https://lore.kernel.org/r/20200914153756.3412156-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903112554.34263-8-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903112554.34263-9-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge 5.9-rc3 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lvs_rh_probe() can return some nonnegative value from usb_control_msg()
when it is less than "USB_DT_HUB_NONVAR_SIZE + 2" that is considered as
a failure. Make lvs_rh_probe() return -EINVAL in this case.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200805090643.3432-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt and
console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv30A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynW+gCgv+OqxT0jeNRAMSQcpMvP3wTBMKIAn1StfjJ4
y8uwZuQQimD49uj8XtDq
=bKSv
-----END PGP SIGNATURE-----
Merge tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.
Fix that up and update the copyright date for the driver
Reworked from an original patch written by Christoph Jung.
Fixes: bab5417f5f ("USB: misc: iowarrior: add support for the 100 device")
Fixes: 5f6f8da2d7 ("USB: misc: iowarrior: add support for the 28 and 28L devices")
Fixes: 461d8deb26 ("USB: misc: iowarrior: add support for 2 OEMed devices")
Cc: stable <stable@kernel.org>
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the warning: [-Werror=-Wframe-larger-than=]
drivers/usb/misc/usbtest.c: In function 'test_queue':
drivers/usb/misc/usbtest.c:2148:1:
warning: the frame size of 1232 bytes is larger than 1024 bytes
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Link: https://lore.kernel.org/r/ffa85702-86ab-48d7-4da2-2efcc94b05d3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8UzA4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGQ7cH/3v+Gv+SmHJCvaT2
CSu0+7okVnYbY3UTb3hykk7/aOqb6284KjxR03r0CWFzsEsZVhC5pvvruASSiMQg
Pi04sLqv6CsGLHd1n+pl4AUYEaxq6k4KS3uU3HHSWxrahDDApQoRUx2F8lpOxyj8
RiwnoO60IMPA7IFJqzcZuFqsgdxqiiYvnzT461KX8Mrw6fyMXeR2KAj2NwMX8dZN
At21Sf8+LSoh6q2HnugfiUd/jR10XbfxIIx2lXgIinb15GXgWydEQVrDJ7cUV7ix
Jd0S+dtOtp+lWtFHDoyjjqqsMV7+G8i/rFNZoxSkyZqsUTaKzaR6JD3moSyoYZgG
0+eXO4A=
=9EpR
-----END PGP SIGNATURE-----
Merge 5.8-rc6 into tty-next
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sisusb_init.h is included by multiple source files, but the big data
tables contained are only referenced by one of them, leaving the tables
'defined but not used' by the remainder. We have a choice to either
place them inside the source file, taking up may lines and potentially
overwhelming the source file OR tuck them away neatly inside their own
headerfile. The latter was chosen.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/usb/misc/sisusbvga/sisusb.c:54:
drivers/usb/misc/sisusbvga/sisusb_init.h:664:34: warning: ‘SiSUSB_VCLKData’ defined but not used [-Wunused-const-variable=]
664 | static const struct SiS_VCLKData SiSUSB_VCLKData[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:406:35: warning: ‘SiSUSB_CRT1Table’ defined but not used [-Wunused-const-variable=]
406 | static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = {
| ^~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:348:30: warning: ‘SiSUSB_RefIndex’ defined but not used [-Wunused-const-variable=]
348 | static const struct SiS_Ext2 SiSUSB_RefIndex[] = {
| ^~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:269:29: warning: ‘SiSUSB_EModeIDTable’ defined but not used [-Wunused-const-variable=]
269 | static const struct SiS_Ext SiSUSB_EModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:238:36: warning: ‘SiSUSB_StandTable’ defined but not used [-Wunused-const-variable=]
238 | static const struct SiS_StandTable SiSUSB_StandTable[] = {
| ^~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:201:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
201 | static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = {
| ^~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:196:28: warning: ‘SiSUSB_SModeIDTable’ defined but not used [-Wunused-const-variable=]
196 | static const struct SiS_St SiSUSB_SModeIDTable[] = {
| ^~~~~~~~~~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:183:28: warning: ‘SiS_VGA_DAC’ defined but not used [-Wunused-const-variable=]
183 | static const unsigned char SiS_VGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:172:28: warning: ‘SiS_EGA_DAC’ defined but not used [-Wunused-const-variable=]
172 | static const unsigned char SiS_EGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:161:28: warning: ‘SiS_CGA_DAC’ defined but not used [-Wunused-const-variable=]
161 | static const unsigned char SiS_CGA_DAC[] = {
| ^~~~~~~~~~~
drivers/usb/misc/sisusbvga/sisusb_init.h:150:28: warning: ‘SiS_MDA_DAC’ defined but not used [-Wunused-const-variable=]
150 | static const unsigned char SiS_MDA_DAC[] = {
| ^~~~~~~~~~~
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not referenced anywhere in the kernel.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/sisusbvga/sisusb_init.h:171:29: warning: ‘ModeIndex_1280x1024’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:170:29: warning: ‘ModeIndex_1280x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:169:29: warning: ‘ModeIndex_1280x720’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:168:29: warning: ‘ModeIndex_1152x864’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:167:29: warning: ‘ModeIndex_1024x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:166:29: warning: ‘ModeIndex_1024x768’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:165:29: warning: ‘ModeIndex_960x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:164:29: warning: ‘ModeIndex_960x540’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:163:29: warning: ‘ModeIndex_856x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:162:29: warning: ‘ModeIndex_848x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:161:29: warning: ‘ModeIndex_800x600’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:160:29: warning: ‘ModeIndex_800x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:159:29: warning: ‘ModeIndex_768x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:158:29: warning: ‘ModeIndex_720x576’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:157:29: warning: ‘ModeIndex_720x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:156:29: warning: ‘ModeIndex_640x480’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:155:29: warning: ‘ModeIndex_640x400’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:154:29: warning: ‘ModeIndex_512x384’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:153:29: warning: ‘ModeIndex_400x300’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:152:29: warning: ‘ModeIndex_320x240’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:151:29: warning: ‘ModeIndex_320x200’ defined but not used [-Wunused-const-variable=]
drivers/usb/misc/sisusbvga/sisusb_init.h:232:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=]
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200715093209.3165641-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The char buffer buf, receives data directly from user space,
so its content might be negative and its elements are left
shifted to form an unsigned integer.
Since left shifting a negative value is undefined behavior, thus
change the char to u8 to elimintate this UB.
Signed-off-by: Changming Liu <charley.ashbringer@gmail.com>
Link: https://lore.kernel.org/r/20200711043018.928-1-charley.ashbringer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:290: warning: Function parameter or member 'dev' not described in 'tower_delete'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'inode' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'file' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'inode' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'file' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:452: warning: Function parameter or member 'dev' not described in 'tower_check_for_read_packet'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'file' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'wait' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'file' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'off' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'whence' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'file' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'buffer' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'count' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'ppos' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'file' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'buffer' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'count' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'ppos' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:669: warning: Function parameter or member 'urb' not described in 'tower_interrupt_in_callback'
drivers/usb/misc/legousbtower.c:724: warning: Function parameter or member 'urb' not described in 'tower_interrupt_out_callback'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'interface' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'id' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:863: warning: Function parameter or member 'interface' not described in 'tower_disconnect'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/ldusb.c:192: warning: Function parameter or member 'dev' not described in 'ld_usb_abort_transfers'
drivers/usb/misc/ldusb.c:206: warning: Function parameter or member 'dev' not described in 'ld_usb_delete'
drivers/usb/misc/ldusb.c:220: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_in_callback'
drivers/usb/misc/ldusb.c:281: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_out_callback'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'inode' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'file' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'inode' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'file' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'file' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'wait' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'file' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'buffer' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'count' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'ppos' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'file' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'buffer' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'count' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'ppos' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'intf' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'id' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:754: warning: Function parameter or member 'intf' not described in 'ld_usb_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Michael Hund <mhund@ld-didactic.de>
Cc: David Glance <advidgsf@sourceforge.net>
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/iowarrior.c:251: warning: Function parameter or member 'dev' not described in 'iowarrior_delete'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'file' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'buffer' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'count' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'ppos' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'file' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'cmd' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'arg' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'inode' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'file' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'inode' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'file' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'interface' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'id' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:879: warning: Function parameter or member 'interface' not described in 'iowarrior_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks although Stephane's name was corrupted somehow.
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/adutux.c:117: warning: Function parameter or member 'dev' not described in 'adu_abort_transfers'
drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'interface' not described in 'adu_probe'
drivers/usb/misc/adutux.c:653: warning: Function parameter or member 'id' not described in 'adu_probe'
drivers/usb/misc/adutux.c:762: warning: Function parameter or member 'interface' not described in 'adu_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: Juergen Stuber <stuber@loria.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code currently uses bitfields to store true-false values. Switch all
of that to bools. Apart from the cleanup, it saves 20B of code as many
shifts, ANDs, and ORs became simple movzb's.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200615074910.19267-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce names (en enum) for 0, 1, and 2 constants. We now have
VCI_HALF_BRIGHT, VCI_NORMAL, and VCI_BOLD instead.
Apart from the cleanup,
1) the enum allows for better type checking, and
2) this saves some code. No more fiddling with bits is needed in
assembly now. (OTOH, the structure is larger.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200615074910.19267-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason, the TEST_ defines in the usb/ch9.h files did not have
the USB_ prefix on it, making it a bit confusing when reading the file,
as well as not the nicest thing to do in a uapi file.
So fix that up and add the USB_ prefix on to them, and fix up all
in-kernel usages. This included deleting the duplicate copy in the
net2272.h file.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jules Irenge <jbi.octave@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Rob Gill <rrobgill@protonmail.com>
Cc: Macpaul Lin <macpaul.lin@mediatek.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Bin Liu <b-liu@ti.com>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Acked-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sisusb_copy_memory is called in several places.
sisusb_copy_memory calls sisusb_write_mem_bulk which
is called by sisusb_write and sisusb_send_bulk_msg.
change the related parameters from char to u8 accordingly
Signed-off-by: Changming Liu <liu.changm@northeastern.edu>
Link: https://lore.kernel.org/r/20200530014820.9967-2-liu.changm@northeastern.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use array_size() helper instead of the open-coded version in memcpy().
These sorts of multiplication factors need to be wrapped in array_size().
This issue was found with the help of Coccinelle and, audited and fixed
manually.
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200615231827.GA21348@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change a bunch of arguments of wrapper functions which pass signed
integer to an unsigned integer which might cause undefined behaviors
when sign integer overflow.
Signed-off-by: Changming Liu <liu.changm@northeastern.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects the SPDX License Identifier style in
header files related to USB Miscellaneous drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Link: https://lore.kernel.org/r/20200404094638.GA5319@nishad
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4d7201cda2 ("usb: usb251xb: add vdd supply support") didn't
covered the non-DT use-case and so the regualtor_enable() call during
probe will fail on those platforms. Also the commit didn't handled the
error case correctly.
Move devm_regulator_get() out of usb251xb_get_ofdata() to address the
1st issue. This can be done without worries because devm_regulator_get()
handles the non-DT use-case too. Add devm_add_action_or_reset() to
address the 2nd bug.
Fixes: 4d7201cda2 ("usb: usb251xb: add vdd supply support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Acked-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20200226072644.18490-1-m.felsch@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new device id for the 100 devie. It has 4 interfaces like the 28
and 28L devices but a larger endpoint so more I/O pins.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The product ID is little endian and needs to be converted.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20200213111336.32392-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iOS devices will not draw more than 500mA unless instructed to do so.
Setting the charge type power supply property to "fast" tells the device
to start drawing more power, using the same procedure that official
"MFi" chargers would.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191016093933.693-7-hadess@hadess.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new device ids for the 28 and 28L devices. These have 4 interfaces
instead of 2, but the driver binds the same, so the driver changes are
minimal.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212040422.2991-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for two OEM devices that are identical to existing
IO-Warrior devices, except for the USB device id.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212040422.2991-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
