We have to check if the values are >= *_MAX, not just >, fix it.
From the bugzilla report:
''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.
It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"
Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''
Committer note:
Testing it:
$ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
[ perf record: Woken up 16 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
$ perf evlist
L1-dcache-load-misses
L1-dcache-loads
L1-dcache-stores
L1-icache-load-misses
LLC-load-misses
LLC-loads
LLC-store-misses
LLC-stores
branch-load-misses
branch-loads
dTLB-load-misses
dTLB-loads
dTLB-store-misses
dTLB-stores
iTLB-load-misses
iTLB-loads
node-load-misses
node-loads
node-store-misses
node-stores
$ perf list cache
List of pre-defined events (to be used in -e):
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
node-store-misses [Hardware cache event]
node-stores [Hardware cache event]
$
Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to successfully decode Intel PT traces, context switch events
are needed from the moment the trace starts. Currently that is ensured
by using the 'immediate' flag which enables the switch event when it is
opened.
However, since commit 86c2786994 ("perf intel-pt: Add support for
PERF_RECORD_SWITCH") that might not always happen. When tracing
system-wide the context switch event is added to the tracking event
which was not set as 'immediate'. Change that so it is.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 86c2786994 ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zh2j4iqimralugke5qq7dn6d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dup and fdopen can potentially fail, so add some extra
error handling checks rather than assuming they always work.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1471038296-12956-1-git-send-email-colin.king@canonical.com
[ Free resources when those functions (now being verified) fail ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 73cdf0c6ea ("perf symbols: Record text offset in dso
to calculate objdump address") started storing the offset of
the text section for all DSOs:
if (elf_section_by_name(elf, &ehdr, &tshdr, ".text", NULL))
dso->text_offset = tshdr.sh_addr - tshdr.sh_offset;
Unfortunately this breaks debuginfo files, because we need to calculate
the offset of the text section in the associated executable file. As a
result perf annotate returns junk for all debuginfo files.
Fix this by using runtime_ss->elf which should point at the executable
when parsing a debuginfo file.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: 73cdf0c6ea ("perf symbols: Record text offset in dso to calculate objdump address")
Link: http://lkml.kernel.org/r/20160813115533.6de17912@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because perf data from pipe do not have a header with evsel attr, we
should not check that and disable symbol_conf.use_callchain. Otherwise,
perf script won't show callchains even if the data stream contains
callchain.
Before:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1828 182630.186578: 250000 cpu-clock: ..b9499 setup_arg_pages
uname 1828 182630.186850: 250000 cpu-clock: ..83b20 ___might_sleep
uname 1828 182630.187153: 250000 cpu-clock: ..4b6be file_map_prot_ch
...
After:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1833 182675.927099: 250000 cpu-clock:
ba5520 _raw_spin_lock+0xfe200040 ([kernel.kallsyms])
389dd4 expand_downwards+0xfe200154 ([kernel.kallsyms])
389f34 expand_stack+0xfe200024 ([kernel.kallsyms])
3b957e setup_arg_pages+0xfe20019e ([kernel.kallsyms])
40c80f load_elf_binary+0xfe20042f ([kernel.kallsyms])
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf shows the usage message when perf scripts folder failed to open,
which misleads users to let them think the command is being mistyped.
This patch shows a proper message and guides users to check the
PERF_EXEC_PATH environment variable in that case.
Before:
$ perf script --list
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-l, --list list available scripts
After:
$ perf script --list
open(/home/user/perf-core/scripts) failed.
Check for "PERF_EXEC_PATH" env to set scripts dir.
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed on Fedora Rawhide:
$ gcc --version
gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4)
$ rpm -q glibc
glibc-2.24.90-1.fc26.x86_64
$
CC /tmp/build/perf/util/jitdump.o
util/jitdump.c: In function 'jit_repipe_code_load':
util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
event->mmap2.maj = major(st.st_dev);
^~~~~
In file included from /usr/include/features.h:397:0,
from /usr/include/sys/types.h:25,
from util/jitdump.c:1:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
Fix it following that recomendation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arch__post_process_probe_trace_events() calls get_target_map() to
prepare symbol table. get_target_map() is defined inside
util/probe-event.c.
probe-event.c will only get included in perf binary if CONFIG_LIBELF is
set. Hence arch__post_process_probe_trace_events() needs to be defined
inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com
[ Thunderbird MUA mangled it, fix that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael reported 'perf mem -t store record' being broken. The reason is
latest rework of this area:
commit acbe613e0c ("perf tools: Add monitored events array")
We don't mark perf_mem_events store record when -t store option is
specified.
Committer notes:
Before:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cycles:ppp
#
After:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cpu/mem-stores/P
#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: acbe613e0c ("perf tools: Add monitored events array")
Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer
to section 36.4.2.2 Target IP (TIP) Packet - IP Compression.
Existing Intel PT packet decoder did not support type 4, and got type 6
wrong. Because type 3 and type 4 have the same number of bytes, the
packet 'count' has been changed from being the number of ip bytes to
being the type code. That allows the Intel PT decoder to correctly
decide whether to sign-extend or use the last ip. However that also
meant the code had to be adjusted in a number of places.
Currently hardware is not using the new compression types, so this fix
has no effect on existing hardware.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Powerpc has Global Entry Point and Local Entry Point for functions. LEP
catches call from both the GEP and the LEP. Symbol table of ELF contains
GEP and Offset from which we can calculate LEP, but debuginfo does not
have LEP info.
Currently, perf prioritize symbol table over dwarf to probe on LEP for
ppc64le. But when user tries to probe with function parameter, we fall
back to using dwarf(i.e. GEP) and when function called via LEP, probe
will never hit.
For example:
$ objdump -d vmlinux
...
do_sys_open():
c0000000002eb4a0: e8 00 4c 3c addis r2,r12,232
c0000000002eb4a4: 60 00 42 38 addi r2,r2,96
c0000000002eb4a8: a6 02 08 7c mflr r0
c0000000002eb4ac: d0 ff 41 fb std r26,-48(r1)
$ sudo ./perf probe do_sys_open
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060896 filename_string=+0(%gpr4):string
For second case, perf probed on GEP. So when function will be called via
LEP, probe won't hit.
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB perf.data ]
To resolve this issue, let's not prioritize symbol table, let perf
decide what it wants to use. Perf is already converting GEP to LEP when
it uses symbol table. When perf uses debuginfo, let it find LEP offset
form symbol table. This way we fall back to probe on LEP for all cases.
After patch:
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904 filename_string=+0(%gpr4):string
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (11 samples) ]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of inline code, introduce function to post process kernel
probe trace events.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf probe' tool detects a variable's type and use the detected
type to add a new probe. Then, kprobes prints its variable in
hexadecimal format if the variable is unsigned and prints in decimal if
it is signed.
We sometimes want to see unsigned variable in decimal format (i.e.
sector_t or size_t). In that case, we need to investigate the variable's
size manually to specify just signedness.
This patch add signedness casting support. By specifying "s" or "u" as a
type, perf-probe will investigate variable size as usual and use the
specified signedness.
E.g. without this:
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9692 [003] d..1 971.096633: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d00
dbench-9692 [003] d..1 971.096685: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x1a3d80
dbench-9692 [003] d..1 971.096687: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d80
...
// need to investigate the variable size
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector:s64'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s64)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
With this:
// just use "s" to cast its signedness
$ perf probe -v -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9689 [001] d..1 1212.391237: submit_bio: (submit_bio+0x0/0x140) bi_sector=128
dbench-9689 [001] d..1 1212.391252: submit_bio: (submit_bio+0x0/0x140) bi_sector=131072
dbench-9697 [006] d..1 1212.398611: submit_bio: (submit_bio+0x0/0x140) bi_sector=30208
This commit also update perf-probe.txt to describe "types". Most parts
are based on existing documentation: Documentation/trace/kprobetrace.txt
Committer note:
Testing using 'perf trace':
# perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=0xc133c0)
3181.861 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffb8)
3181.881 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc0)
3184.488 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc8)
<SNIP>
4717.927 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7a88)
4717.970 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7880)
^C[root@jouet ~]#
Now, using this new feature:
[root@jouet ~]# perf probe -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
[root@jouet ~]# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145704)
0.017 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145712)
0.019 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145720)
2.567 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145728)
5631.919 probe:submit_bio:(ffffffffac3aee00) bi_sector=0)
5631.941 probe:submit_bio:(ffffffffac3aee00) bi_sector=8)
5631.945 probe:submit_bio:(ffffffffac3aee00) bi_sector=16)
5631.948 probe:submit_bio:(ffffffffac3aee00) bi_sector=24)
^C#
With callchains:
# trace --no-syscalls --ev probe:submit_bio/max-stack=10/
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662544)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.023 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662552)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.027 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662560)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
2.593 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662568)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
journal_submit_commit_record+0xa82001ac ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa82012e8 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
^C#
Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470710408-23515-1-git-send-email-naohiro.aota@hgst.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we don't have a tracee (i.e. we're attaching to a task or CPU),
counters can still be running after our workload finishes, and can still
be running as we read their values. As we read events one-by-one, there
can be arbitrary skew between values of events, even within a group.
This means that ratios within an event group are not reliable.
This skew can be seen if measuring a group of identical events, e.g:
# perf stat -a -C0 -e '{cycles,cycles}' sleep 1
To avoid this, we must stop groups from counting before we read the
values of any constituent events. This patch adds and makes use of a new
disable_counters() helper, which disables group leaders (and thus each
group as a whole). This mirrors the use of enable_counters() for
starting event groups in the absence of a tracee.
Closing a group leader splits the group, and without a disabled group
leader the newly split events will begin counting. Thus to ensure counts
are reliable we must defer closing group leaders until all counts have
been read. To do so this patch removes the event closing logic from the
read_counters() helper, explicitly closes the events using
perf_evlist__close(), which also aids legibility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1470747869-3567-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If module is "module" then dso->short_name is "[module]". Substring
comparing is't enough: "raid10" matches to "[raid1]". This patch also
checks terminating zero in module name.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/147039975648.715620.12985971832789032159.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adjust map->reloc offset for the unmapped address when finding
alternative symbol address from map, because KASLR can relocate the
kernel symbol address.
The same adjustment has been done when finding appropriate kernel symbol
address from map which was introduced by commit f90acac757 ("perf
probe: Find given address from offline dwarf")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160806192948.e366f3fbc4b194de600f8326@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use libtraceevent to format trace event fields into printable
strings to use in hist entries it is important to trim it from the
default 4 KiB it starts with to what is really used, to reduce the
memory footprint, so use realloc(seq.buffer, seq.len + 1) when returning
the seq.buffer formatted with the fields contents.
Reported-and-Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-t3hl7uxmilrkigzmc90rlhk2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the 'bpf-output' field to the perf script usage message, and docs.
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470192469-11910-4-git-send-email-bgregg@netflix.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add --sample-cpu to 'perf record', to explicitely ask for sampling
the CPU (Jiri Olsa)
Fixes:
- Fix processing of multi byte chunks in objdump output, fixing
disassemble processing for annotation on at least ARM64 (Jan Stancek)
- Use SyS_epoll_wait in a BPF 'perf test' entry instead of sys_epoll_wait, that
is not present in the DWARF info in vmlinux files (Arnaldo Carvalho de Melo)
- Add -wno-shadow when processing files using perl headers, fixing
the build on Fedora Rawhide and Arch Linux (Namhyung Kim)
Infrastructure:
- Annotate prep work to better catch and report errors related to
using objdump to disassemble DSOs (Arnaldo Carvalho de Melo)
- Add 'alloc', 'scnprintf' and 'and' methods for bitmap processing (Jiri Olsa)
- Add nested output resorting callback in hists processing (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=uPmA
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160803' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add --sample-cpu to 'perf record', to explicitely ask for sampling
the CPU (Jiri Olsa)
Fixes:
- Fix processing of multi byte chunks in objdump output, fixing
disassemble processing for annotation on at least ARM64 (Jan Stancek)
- Use SyS_epoll_wait in a BPF 'perf test' entry instead of sys_epoll_wait, that
is not present in the DWARF info in vmlinux files (Arnaldo Carvalho de Melo)
- Add -wno-shadow when processing files using perl headers, fixing
the build on Fedora Rawhide and Arch Linux (Namhyung Kim)
Infrastructure changes:
- Annotate prep work to better catch and report errors related to
using objdump to disassemble DSOs (Arnaldo Carvalho de Melo)
- Add 'alloc', 'scnprintf' and 'and' methods for bitmap processing (Jiri Olsa)
- Add nested output resorting callback in hists processing (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Something made the sys_epoll_wait() function alias not to be found in
the vmlinux DWARF info, being found only in /proc/kallsyms, which made
the BPF perf tests to fail:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : FAILED!
37.2: Test BPF prologue generation : Skip
37.3: Test BPF relocation checker : Skip
[root@jouet ~]#
Using -v we can see it is failing to find DWARF info for the probed function,
sys_epoll_wait, which we can find in /proc/kallsyms but not in vmlinux with
CONFIG_DEBUG_INFO:
[root@jouet ~]# grep -w sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
[root@jouet ~]# readelf -wi /lib/modules/4.7.0+/build/vmlinux | grep -w sys_epoll_wait
[root@jouet ~]#
If we try to use perf probe:
[root@jouet ~]# perf probe sys_epoll_wait
Failed to find debug information for address ffffffffbd295b50
Probe point 'sys_epoll_wait' not found.
Error: Failed to add events.
[root@jouet ~]#
It all works if we use SyS_epoll_wait, that is just an alias to the probed
function:
[root@jouet ~]# grep -i sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T SyS_epoll_wait
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
So use it:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : Ok
[root@jouet ~]#
Further info:
[root@jouet ~]# gcc --version
gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3)
[acme@jouet linux]$ cat /etc/fedora-release
Fedora release 24 (Twenty Four)
Investigation as to why it fails is still underway, but it was always
going from sys_epoll_wait to SyS_epoll_wait when looking up the DWARF
info in vmlinux, and this is what is breaking now.
Switching to use SyS_epoll_wait allows this test to proceed and test the
BPF code it was designed for, so lets have this in to allow passing this
test while we fix the root cause.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7hekjp0bodwjbb419sl2b55h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
objdump's raw insn output can vary across architectures on the number of
bytes per chunk (bpc) displayed and their endianness.
The code-reading test relied on reading objdump output as 1 bpc. Kaixu
Xia reported test failure on ARM64, where objdump displays 4 bpc:
70c48: f90027bf str xzr, [x29,#72]
70c4c: 91224000 add x0, x0, #0x890
70c50: f90023a0 str x0, [x29,#64]
This patch adds support to read raw insn output for any bpc length.
In case of 2+ bpc it also guesses objdump's display endian.
Reported-and-Tested-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/07f0f7bcbda78deb423298708ef9b6a54d6b92bd.1452592712.git.jstancek@redhat.com
[ Fix up pr_fmt() call to use %zd for size_t variables, fixing the build on Ubuntu cross-compiling to armhf and ppc64 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --sample-cpu option to be able to explicitly enable CPU sample
type. Currently it's only enable implicitly in case the target is cpu
related.
It will be useful for following c2c record tool.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dealing with nested hist entries it's helpful to have a way to
resort those nested objects.
Adding optional callback call into output_resort function and following
new interface function:
typedef int (*hists__resort_cb_t)(struct hist_entry *he);
void hists__output_resort_cb(struct hists *hists,
struct ui_progress *prog,
hists__resort_cb_t cb);
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason to keep it in separate directory now when we moved out
the rest of the files.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Automatically test the bitmap_scnprintf function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On my Archlinux machine, perf faild to build like below:
CC scripts/perl/Perf-Trace-Util/Context.o
In file included from /usr/lib/perl5/core/perl/CORE/perl.h:3905:0,
from Context.xs:23:
/usr/lib/perl5/core/perl/CORE/inline.h: In function :
/usr/lib/perl5/core/perl/CORE/cop.h:612:13: warning: declaration of 'av'
shadows a previous local [-Werror-shadow]
AV *av =3D GvAV(PL_defgv);
^
/usr/lib/perl5/core/perl/CORE/inline.h:526:5: note: in expansion of
macro 'CX_POP_SAVEARRAY'
CX_POP_SAVEARRAY(cx);
^~~~~~~~~~~~~~~~
In file included from /usr/lib/perl5/core/perl/CORE/perl.h:5853:0,
from Context.xs:23:
/usr/lib/perl5/core/perl/CORE/inline.h:518:9: note:
shadowed declaration is here
AV *av;
^~
What I did to fix is adding '-Wno-shadow' as the error message said it's
the cause of the failure. Since it's from the perl (not perf) code
base, we don't have the control so I just wanted to ignore the warning
when compiling perl scripting code.
Committer note:
This also fixes the build on Fedora Rawhide.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160802024317.31725-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso__build_id_filename(..., NULL, ...) returns !NULL its because it
allocated it, so, when reaching the 'if (dso__is_kcore()) test, we
already checked that and were just "fallbacking" to using
dso->long_name, but without freeing filename, thus leaking it.
Fix it by adding the dso__is_kcore() test to the 'or' group just after
it, the one containing the full fallback code, including freeing the
filename.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ee205503f2 ("perf tools: Fix annotation with kcore")
Link: http://lkml.kernel.org/n/tip-qi4rpjq8yo6myvg99kkgt0xz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just using pr_error() which makes it difficult for non stdio UIs
to provide errors using its widgets, as they need to somehow catch what
was passed to pr_error().
Fix it by introducing a __strerror() interface like the ones used
elsewhere, for instance target__strerror().
This is just the initial step, more work will be done, but first some
error handling bugs noticed while working on this need to be dealt with.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dgd22zl2xg7x4vcnoa83jxfb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will not annotate anything, it will just disassembly the
given map->dso and symbol.
It currently does this by parsing the output of 'objdump --disassemble',
but this could conceivably be done using a library or an offshot of
the kernel's instruction decoder (arch/x86/lib/inat.c), etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2xpfl4bfnrd6x584b390qok7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"This update contains:
- a fix for the bpf tools to use the new EM_BPF code
- a fix for the module parser of perf to retrieve the
proper text start address
- add str_error_c to libapi to avoid linking against
tools/lib/str_error_r.o"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib api: Add str_error_c to libapi
perf s390: Fix 'start' address of module's map
tools lib bpf: Use official ELF e_machine value
So no need for checking if it uses the strerror_r() GNU variant error
reporting mechanism, i.e. if it returns a pointer to a immutable string
internal to glibc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c8b5f2c96d ("tools: Introduce str_error_r()")
Link: http://lkml.kernel.org/n/tip-xr83cd4y4r3cn6tq6w4f59jb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need to redirect the stderr as well, so open code popen as
a starting point.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-k0zt9svg4bswiglem7ornts4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1/ Replace pcommit with ADR / directed-flushing:
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement either
ADR, or provide one or more flush addresses per nvdimm. ADR
(Asynchronous DRAM Refresh) flushes data in posted write buffers to the
memory controller on a power-fail event. Flush addresses are defined in
ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
"Flush Hint Address Structure". A flush hint is an mmio address that
when written and fenced assures that all previous posted writes
targeting a given dimm have been flushed to media.
2/ On-demand ARS (address range scrub):
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the media
to refresh the bad block list, userspace can also request a re-scrub at
any time.
3/ Support for the Microsoft DSM (device specific method) command format.
4/ Support for EDK2/OVMF virtual disk device memory ranges.
5/ Various fixes and cleanups across the subsystem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xCBG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Replace pcommit with ADR / directed-flushing.
The pcommit instruction, which has not shipped on any product, is
deprecated. Instead, the requirement is that platforms implement
either ADR, or provide one or more flush addresses per nvdimm.
ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
to the memory controller on a power-fail event.
Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
A flush hint is an mmio address that when written and fenced assures
that all previous posted writes targeting a given dimm have been
flushed to media.
- On-demand ARS (address range scrub).
Linux uses the results of the ACPI ARS commands to track bad blocks
in pmem devices. When latent errors are detected we re-scrub the
media to refresh the bad block list, userspace can also request a
re-scrub at any time.
- Support for the Microsoft DSM (device specific method) command
format.
- Support for EDK2/OVMF virtual disk device memory ranges.
- Various fixes and cleanups across the subsystem.
* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
nfit: do an ARS scrub on hitting a latent media error
nfit: move to nfit/ sub-directory
nfit, libnvdimm: allow an ARS scrub to be triggered on demand
libnvdimm: register nvdimm_bus devices with an nd_bus driver
pmem: clarify a debug print in pmem_clear_poison
x86/insn: remove pcommit
Revert "KVM: x86: add pcommit support"
nfit, tools/testing/nvdimm/: unify shutdown paths
libnvdimm: move ->module to struct nvdimm_bus_descriptor
nfit: cleanup acpi_nfit_init calling convention
nfit: fix _FIT evaluation memory leak + use after free
tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
tools/testing/nvdimm: add virtual ramdisk range
acpi, nfit: treat virtual ramdisk SPA as pmem region
pmem: kill __pmem address space
pmem: kill wmb_pmem()
libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
fs/dax: remove wmb_pmem()
libnvdimm, pmem: flush posted-write queues on shutdown
...
After the previous patch, we can distinguish costly allocations that
should be really lightweight, such as THP page faults, with
__GFP_NORETRY. This means we don't need to recognize khugepaged
allocations via PF_KTHREAD anymore. We can also change THP page faults
in areas where madvise(MADV_HUGEPAGE) was used to try as hard as
khugepaged, as the process has indicated that it benefits from THP's and
is willing to pay some initial latency costs.
We can also make the flags handling less cryptic by distinguishing
GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from
GFP_TRANSHUGE (only direct reclaim, khugepaged default). Adding
__GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed.
The patch effectively changes the current GFP_TRANSHUGE users as
follows:
* get_huge_zero_page() - the zero page lifetime should be relatively
long and it's shared by multiple users, so it's worth spending some
effort on it. We use GFP_TRANSHUGE, and __GFP_NORETRY is not added.
This also restores direct reclaim to this allocation, which was
unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag
by default to madvise and add a stall-free defrag option")
* alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency
is not an issue. So if khugepaged "defrag" is enabled (the default), do
reclaim via GFP_TRANSHUGE without __GFP_NORETRY. We can remove the
PF_KTHREAD check from page alloc.
As a side-effect, khugepaged will now no longer check if the initial
compaction was deferred or contended. This is OK, as khugepaged sleep
times between collapsion attempts are long enough to prevent noticeable
disruption, so we should allow it to spend some effort.
* migrate_misplaced_transhuge_page() - already was masking out
__GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is
equivalent.
* alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise)
are now allocating without __GFP_NORETRY. Other vma's keep using
__GFP_NORETRY if direct reclaim/compaction is at all allowed (by default
it's allowed only for madvised vma's). The rest is conversion to
GFP_TRANSHUGE(_LIGHT).
[mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT]
Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That is the default used when no events is specified in tools, separate
it so that simpler tools that need no evlist can use it directly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-67mwuthscwroz88x9pswcqyv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because it uses that function, which would lead every tool using it
to need to link against tools/lib/str_error_r.o.
This fixes building tools/vm/, that links with libapi.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: b31e3e3316 ("tools lib api fs: Use str_error_r()")
Link: http://lkml.kernel.org/n/tip-aedt3qzibhnhaov2j4caqi61@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking updates from David Miller:
1) Unified UDP encapsulation offload methods for drivers, from
Alexander Duyck.
2) Make DSA binding more sane, from Andrew Lunn.
3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.
4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.
5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
packets as soon as the device sees them, with the option to mirror
the packet on TX via the same interface. From Brenden Blanco and
others.
6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.
7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.
8) Simplify netlink conntrack entry layout, from Florian Westphal.
9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
Schimmel, Yotam Gigi, and Jiri Pirko.
10) Add SKB array infrastructure and convert tun and macvtap over to it.
From Michael S Tsirkin and Jason Wang.
11) Support qdisc packet injection in pktgen, from John Fastabend.
12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.
13) Add NV congestion control support to TCP, from Lawrence Brakmo.
14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.
15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.
16) Support MPLS over IPV4, from Simon Horman.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
xgene: Fix build warning with ACPI disabled.
be2net: perform temperature query in adapter regardless of its interface state
l2tp: Correctly return -EBADF from pppol2tp_getname.
net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
net: ipmr/ip6mr: update lastuse on entry change
macsec: ensure rx_sa is set when validation is disabled
tipc: dump monitor attributes
tipc: add a function to get the bearer name
tipc: get monitor threshold for the cluster
tipc: make cluster size threshold for monitoring configurable
tipc: introduce constants for tipc address validation
net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
MAINTAINERS: xgene: Add driver and documentation path
Documentation: dtb: xgene: Add MDIO node
dtb: xgene: Add MDIO node
drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
drivers: net: xgene: Use exported functions
drivers: net: xgene: Enable MDIO driver
drivers: net: xgene: Add backward compatibility
drivers: net: phy: xgene: Add MDIO driver
...
At present, when creating module's map, perf gets 'start' address by
parsing '/proc/modules', but it's the module base address, it isn't the
start address of the '.text' section.
In most arches, it's OK. But for s390, it places 'GOT' and 'PLT'
relocations before '.text' section. So there exists an offset between
module base address and '.text' section, which will incur wrong symbol
resolution for modules.
Fix this bug by getting 'start' address of module's map from parsing
'/sys/module/[module name]/sections/.text', not from '/proc/modules'.
Signed-off-by: Song Shan Gong <gongss@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1469070651-6447-2-git-send-email-gongss@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit e083a21fca.
Not needed at all, tools/perf/util/perf_regs.h, included via:
#include "perf_regs.h"
Should have a definition for PERF_REGS_MAX, and since this is dependent
on HAVE_PERF_REGS_SUPPORT, fixes the build on powerpc, noticed by trying
to cross compile this from ubuntu16.04 with a locally build libz &
elfutils pair, since those are not available in multilib packages.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-0bv204s71t4wuw1l53b6fz79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cross building it on Ubuntu 16.04 to ARM ends up showing we get
the free() prototype by luck in other environments, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ktfgmmyhcfw8ondka2013f3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previous patches added support for Intel's AVX-512 instructions to the
kernel and perf tools instruction decoders.
AVX-512 instructions are documented in Intel Architecture Instruction
Set Extensions Programming Reference (February 2016).
Add a representative set of instructions to perf's "new instructions"
test. e.g.
perf test "new instructions"
Or to view a particular instruction:
perf test -v "new instructions" 2>&1 | grep vbroadcasti64x4
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for Intel's AVX-512 instructions to perf tools instruction
decoder used by Intel PT. The kernel's instruction decoder was updated in
a previous patch.
AVX-512 instructions are documented in Intel Architecture Instruction Set
Extensions Programming Reference (February 2016).
AVX-512 instructions are identified by a EVEX prefix which, for the purpose
of instruction decoding, can be treated as though it were a 4-byte VEX
prefix.
Existing instructions which can now accept an EVEX prefix need not be
further annotated in the op code map (x86-opcode-map.txt). In the case of
new instructions, the op code map is updated accordingly.
Also add associated Mask Instructions that are used to manipulate mask
registers used in AVX-512 instructions.
A representative set of instructions is added to the perf tools new
instructions test in a subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
vcvtph2ps does not have an immediate operand, so remove the erroneous
'Ib' from its opcode map entry. Add vcvtph2ps to the perf tools new
instructions test to verify it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: http://lkml.kernel.org/r/1469003437-32706-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add automated test for is_printable_array function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's used from 2 objects in perf, so it's better to keep just one copy.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jirka reported that python code returns all arrays as strings. This
makes impossible to get all items for byte array tracepoint field
containing 0x00 value item.
Fixing this by scanning full length of the array and returning it as
PyByteArray object in case non printable byte is found.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-and-Tested-by: Jiri Pirko <jiri@mellanox.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warn unmatched function filter correctly instead of warning
"symbol-loading error", since that can be a filter issue.
From the technical point of view, this adds a filter chech in map__load
and if there is a filter, it returns -2 (filter-out), instead of -1
(error), and perf-probe checks it and change message.
E.g. without this fix:
# perf probe -F rt_sp*
no symbols found in [kernel.kallsyms], maybe install a debug package?
Failed to load symbols in kernel
With this fix:
# perf probe -F rt_sp*
no symbols passed the given filter.
Failed to find symbols matched to "rt_sp*"
Error: Failed to show functions.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146885835596.16106.2293540792775552481.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
