- Enable thermal support for omap3 now that the driver changes have
been merged
- Enable magnetometer and accelerometer support as loadable modules
for Motorola mapphone devices
- Enable eQEP counter for beaglebone blue as loadable modules
-----BEGIN PGP SIGNATURE-----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=7JiH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.11 merge window
- Enable thermal support for omap3 now that the driver changes have
been merged
- Enable magnetometer and accelerometer support as loadable modules
for Motorola mapphone devices
- Enable eQEP counter for beaglebone blue as loadable modules
* tag 'omap-for-v5.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m
ARM: omap2plus_defconfig: Enable OMAP3_THERMAL
Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for the STMicroelectronics STUSB160X USB Type-C port
controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as
modules.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables the counter subsystem and drivers for the stm32 timer and LP
timer.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables the TI eQEP counter driver that is used by BeagleBone Blue.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable networking options required for NFS boot on TI platforms, which is
widely for automated test systems.
- enable new TI CPSW switch driver and related NET_SWITCHDEV config
- enable TI DP83867 phy
- explicitly enable PTP clock support to ensure dependent networking
drivers will stay built-in.
vmlinux size changes:
- before:
text data bss dec hex filename
14703736 8024602 444976 23173314 16198c2 ./omap-arm/vmlinux
- after:
text data bss dec hex filename
14727271 8029150 444528 23200949 16204b5 ./omap-arm/vmlinux
diff: 27635 (dec)
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201030124650.20349-1-grygorii.strashko@ti.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the defconfig for the U8500 platform with
some of the changes from the v5.9 and v5.10 kernel
cycles:
- No need to select the schedutil cpufreq governor
because it is the default now.
- Enable the CY8CTMA140 touchscreen as used on the
Samsung Skomer GT-S7710.
- Enable the Samsung S6E63M0 DSI panel as used on
the Samsung Golden GT-I8810.
- Enable the KTD253 backlight as used on the Samsung
Skomer GT-S7710.
- Drop CONFIG_USB as we only use the gadget mode of
the MUSB driver.
- Add selection of the CONFIG_LEDS_LP55XX_COMMON
lest the LP5521 LEDs will not work.
- Move the config entry for CONFIG_DEBUG_FS.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66RqgAKCRCKwlD9ZEnx
cLC5AP493HI4gYGzpdkwikaOR6sMM5iwI0v3n1AYcuw79Ep11gEAyEg0DpLMAOG8
aHDYqSv6Zo10pYjbHBJRwYRrOJMarw4=
=eio1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to
support motorola xt894's magnetometer and motorola xt875's
accelerometer respectivly
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject a bit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the additional power management options enabled,
this patch enables OMAP3_THERMAL by default.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The media tree Kconfig has changed recently, and a lot of modules were
built unintentionally, like the dvb frontends and encoders.
Resync the defconfig to build the ISI drivers and tested sensors.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201029121223.871531-1-eugen.hristev@microchip.com
The media tree Kconfig has changed recently, and a lot of modules were
built unintentionally, like the dvb frontends and encoders.
Resync the defconfig to build the sama5 drivers and tested sensors.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=T9BC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q9hYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5O3Af/cYifoTK2/oL+IC9tirmHj+1h4Yqa
F+owysiOlMoqdxhHRYlhiowE5euTEMAQFjKyUxSLoBUnemP0W/t556zcyCvCJgFL
R1ZUm8clACxXYJVlasT7qRhR/T0hVz2BMgIAjWtoY8hTXfxyVr+WurdxLbdUn8cC
6p28DV26xdZeRH/Jrk/4frSWxjCYPNcVmstP8eHcPOOBw7SdrfquOrjMsaZsiAfF
4CzdjhfCBDH0XznTQ5KY9J+Z8Da8fcikM1+VvVb64WlZI9WPHYYmQQclpJomnOHG
L5dJiLFTjQcWXt/TkYaZozyiW8pG8g7gawpom5JJ1SbW3GR7OFP+RTv8RQ==
=qHiE
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
-----BEGIN PGP SIGNATURE-----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=5No6
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.10 merge window
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
* tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds FMC2 EBI controller support used by STM32MP SOCs.
Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=oMmC
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix an issue with unwanted media drivers being enabled
- New driver: IBM OP Panel, used on ast2600 systems. This requires
enabling I2C slave mode
- Enable I2C MUX GPIO driver
-----BEGIN PGP SIGNATURE-----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=GvTE
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED defconfig updates for 5.10
- Fix an issue with unwanted media drivers being enabled
- New driver: IBM OP Panel, used on ast2600 systems. This requires
enabling I2C slave mode
- Enable I2C MUX GPIO driver
* tag 'aspeed-5.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
Link: https://lore.kernel.org/r/CACPK8XdFE2K1_cyrg=uaD6CaOm_p0RCRmjAsu6uyFKD4rnDggQ@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable touchscreen support on the iWave RZ/G1E platform,
- Update for PCIE_RCAR => CONFIG_PCIE_RCAR_{HOST,EP} split, including
enabling the latter,
- Enable FLASH support on various R-Car Gen3 boards,
- Refresh shmobile_defconfig for v5.9-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX1ICbQAKCRCKwlD9ZEnx
cAL7AP9b6m9TZdbWJEiypip4edwJi085EUS1SykJyw2/esW/6gEAhA7Z5/LoTe0j
sMlIXvfSHLzhEZ3TYH5GFIohlZK9wgw=
=/JQk
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.10
- Enable touchscreen support on the iWave RZ/G1E platform,
- Update for PCIE_RCAR => CONFIG_PCIE_RCAR_{HOST,EP} split, including
enabling the latter,
- Enable FLASH support on various R-Car Gen3 boards,
- Refresh shmobile_defconfig for v5.9-rc1.
* tag 'renesas-arm-defconfig-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Enable CONFIG_PCIE_RCAR_HOST
ARM: multi_v7_defconfig: Enable CONFIG_PCIE_RCAR_HOST
arm64: defconfig: Enable RPC-IF support
ARM: shmobile: defconfig: Refresh for v5.9-rc1
arm64: defconfig: Enable R-Car PCIe endpoint driver
ARM: shmobile: defconfig: Enable TOUCHSCREEN_STMPE
Link: https://lore.kernel.org/r/20200904114819.30254-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Add the syscon LEDs as used on the board for heartbeat
and MMC traffic indication.
- Add fixed voltage regulator support, this is used by the
MMC controller for card voltage.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901082558.80388-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901073930.31548-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
In the 5.7 merge window the media kconfig was restructued. For most
platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps
unwanted drivers disabled.
The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb276).
In that case the filter is set to =n, causing a bunch of DVB tuner drivers
(MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew
out the build time for the Aspeed defconfigs.
Enabling the filter means the Aspeed config also needs to set
CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED
driver enabled.
Fixes: 06b93644f4 ("media: Kconfig: add an option to filter in/out platform drivers")
Fixes: b0cd4fb276 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Enable set of generic, widely used, networking options:
- basic QoS, filter and actions
- VLAN support
- Bridge support
Use "M" build option where possible.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ADC is used by twl4030_charger to read voltages. If a dtb contains
the ADC but the module is not build, probing twl4030_charger will be
endlessly deferred, so just enable CONFIG_TWL4030_MADC in the config.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
i.MX35 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX31 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx31 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX27 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx27 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select GPIO input and evdev as used by the pushbuttons
on the machine.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX8MN/P/Q is built with AArch64 hardware, this is to support
it could run in AArch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
caam crypto module is included in several ARMv7-based SoCs from
i.MX, Layerscape, Vybrid families.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced a dependency of all platform media drivers
on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to
exynos_defconfig. While touching this part, update the media related
configs to the current layout.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
