Fix a crash on DEC platforms starting with:
VFS: Mounted root (nfs filesystem) on device 0:11.
Freeing unused PROM memory: 124k freed
BUG: Bad page state in process swapper pfn:00001
page:(ptrval) refcount:0 mapcount:-128 mapping:00000000 index:0x1 pfn:0x1
flags: 0x0()
raw: 00000000 00000100 00000122 00000000 00000001 00000000 ffffff7f 00000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.9.0-00858-g865c50e1d279 #1
Stack : 8065dc48 0000000b 8065d2b8 9bc27dcc 80645bfc 9bc259a4 806a1b97 80703124
80710000 8064a900 00000001 80099574 806b116c 1000ec00 9bc27d88 806a6f30
00000000 00000000 80645bfc 00000000 31232039 80706ba4 2e392e35 8039f348
2d383538 00000070 0000000a 35363867 00000000 806c2830 80710000 806b0000
80710000 8064a900 00000001 81000000 00000000 00000000 8035af2c 80700000
...
Call Trace:
[<8004bc5c>] show_stack+0x34/0x104
[<8015675c>] bad_page+0xfc/0x128
[<80157714>] free_pcppages_bulk+0x1f4/0x5dc
[<801591cc>] free_unref_page+0xc0/0x130
[<8015cb04>] free_reserved_area+0x144/0x1d8
[<805abd78>] kernel_init+0x20/0x100
[<80046070>] ret_from_kernel_thread+0x14/0x1c
Disabling lock debugging due to kernel taint
caused by an attempt to free bootmem space that as from
commit b93ddc4f91 ("mips: Reserve memory for the kernel image resources")
has not been anymore reserved due to the removal of generic MIPS arch code
that used to reserve all the memory from the beginning of RAM up to the
kernel load address.
This memory does need to be reserved on DEC platforms however as it is
used by REX firmware as working area, as per the TURBOchannel firmware
specification[1]:
Table 2-2 REX Memory Regions
-------------------------------------------------------------------------
Starting Ending
Region Address Address Use
-------------------------------------------------------------------------
0 0xa0000000 0xa000ffff Restart block, exception vectors,
REX stack and bss
1 0xa0010000 0xa0017fff Keyboard or tty drivers
2 0xa0018000 0xa001f3ff 1) CRT driver
3 0xa0020000 0xa002ffff boot, cnfg, init and t objects
4 0xa0020000 0xa002ffff 64KB scratch space
-------------------------------------------------------------------------
1) Note that the last 3 Kbytes of region 2 are reserved for backward
compatibility with previous system software.
-------------------------------------------------------------------------
(this table uses KSEG2 unmapped virtual addresses, which in the MIPS
architecture are offset from physical addresses by a fixed value of
0xa0000000 and therefore the regions referred do correspond to the
beginning of the physical address space) and we call into the firmware
on several occasions throughout the bootstrap process. It is believed
that pre-REX firmware used with non-TURBOchannel DEC platforms has the
same requirements, as hinted by note #1 cited.
Recreate the discarded reservation then, in DEC platform code, removing
the crash.
References:
[1] "TURBOchannel Firmware Specification", On-line version,
EK-TCAAD-FS-004, Digital Equipment Corporation, January 1993,
Chapter 2 "System Module Firmware", p. 2-5
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Fixes: b93ddc4f91 ("mips: Reserve memory for the kernel image resources")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Drop inline for memory setup functions and mark them __init to
fix section mismatch of pmax_setup_memory_region.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Some of these ralink devices come with an ancient u-boot which can't
extract LZMA properly when image gets too big.
Enable zboot support to get a self-extracting kernel instead of relying
on broken u-boot support.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
While it is true that Ingenic SoCs support huge pages, we cannot use
them yet as PTEs don't have any single bit that is free. Right now,
having that symbol only causes build errors, so remove it until the
situation with PTEs is resolved.
Fixes: f0f4a75307 ("MIPS: generic: Add support for Ingenic SoCs")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS_CPU_BP_GHIST is only set two times and more or less immediately
used in cpu-probe.c itself. Remove this option to make room in options
word.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Running a kernel on a R3k of machine definitly will never see one of
the newer CPU cores. And since R3k system usually are low on memory
we could save quite some kbytes:
text data bss dec hex filename
15070 88 32 15190 3b56 arch/mips/kernel/cpu-probe.o
844 4 16 864 360 arch/mips/kernel/cpu-r3k-probe.o
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
cpu-probe.c has grown when supporting more and more CPUs and there
are use cases where probing for all the CPUs isn't useful like
running on a R3k system. But still the fpu handling is nearly
the same. For sharing put the fpu code into it's own file.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
add_memory_region was the old interface for registering memory and
was already changed to used memblock internaly. Replace it by
directly calling memblock functions.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
(1) Replace nid_to_addroffset() with nid_to_addrbase() and then remove the
related useless code.
(2) Since end_pfn = start_pfn + node_psize, use "node_psize" instead of
"end_pfn - start_pfn" to avoid the redundant calculation.
(3) After commit 6fbde6b492 ("MIPS: Loongson64: Move files to the
top-level directory"), CONFIG_ZONE_DMA32 is always set for Loongson64
due to MACH_LOONGSON64 selects ZONE_DMA32, so no need to use ifdef any
more, just remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, CONFIG_SMP can be set as N by user on the Loongson
platform, then there exists the following build error under !CONFIG_SMP:
CC arch/mips/kernel/asm-offsets.s
In file included from ./include/linux/gfp.h:9:0,
from ./include/linux/xarray.h:14,
from ./include/linux/radix-tree.h:18,
from ./include/linux/fs.h:15,
from ./include/linux/compat.h:17,
from arch/mips/kernel/asm-offsets.c:12:
./include/linux/topology.h: In function 'numa_node_id':
./include/linux/topology.h:119:2: error: implicit declaration of function 'cpu_logical_map' [-Werror=implicit-function-declaration]
return cpu_to_node(raw_smp_processor_id());
^
cc1: some warnings being treated as errors
scripts/Makefile.build:117: recipe for target 'arch/mips/kernel/asm-offsets.s' failed
make[1]: *** [arch/mips/kernel/asm-offsets.s] Error 1
Select SMP in Kconfig to avoid the above build error and then remove
CONFIG_SMP=y in loongson3_defconfig.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These boards are used in
- Ubiquiti EdgeRouter (E200),
- Ubiquiti EdgeRouter Pro (E200) and
- Ubiquiti Security Gateway Pro 4 (E220).
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
SGI-IP28 systems only use broken R10k rev 2.5 CPUs, which could lock
up, if ll/sc sequences are issued in certain order. Since those systems
are all non-SMP, we can disable ll/sc usage in kernel.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All boards have the same prom_init() function. Move it to common code and
delete the duplicates.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Only include wm97xx touchscreen probing code, if driver is enabled.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch/mips/kernel/process.c:696:15: error: no previous prototype for 'arch_align_stack' [-Werror=missing-prototypes]
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This commit adds a prototype to fix warning at W=1:
arch/mips/kernel/process.c:95:5: error: no previous prototype for 'arch_dup_task_struct' [-Werror=missing-prototypes]
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This commit adds a prototype to fix warning at W=1:
arch/mips/kernel/idle.c:126:13: error: no previous prototype for 'check_wait' [-Werror=missing-prototypes]
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is nothing that prevents us from using lower maximum values.
It's something that we actually want, when using bigger page sizes on
devices with low RAM.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
1.Fix bugs when detecting ways value of JZ4775's L2 cache.
2.Fix bugs when detecting sets value and ways value of X1000E's L2 cache.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add JZ4775, X1000E, X2000, and X2000E system type for cat /proc/cpuinfo
to give out JZ4775, X1000E, X2000 and X2000E.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This reverts commit 0ee69c589e.
Resource is still needed later in the code, so using
devm_platform_ioremap_resource is no win at all.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When the kernel crashkernel parameter is specified with just a size,
we are supposed to allocate a region from RAM to store the crashkernel.
However, MIPS merely reserves physical address zero with no checking
that there is even RAM there.
Fix this by lifting similar code from x86, importing it to MIPS with the
MIPS specific parameters added. In the absence of any platform specific
information, we allocate the crashkernel region from the first 512MB of
physical memory (limited to CKSEG0 or KSEG0 address range).
When X is not specified, crash_base defaults to 0 (crashkernel=YM@XM).
E.g. without this patch:
The environment as follows:
[ 0.000000] MIPS: machine is loongson,loongson64c-4core-ls7a
...
[ 0.000000] Kernel command line: root=/dev/sda2 crashkernel=96M ...
The warning as follows:
[ 0.000000] Invalid memory region reserved for crash kernel
And the iomem as follows:
00200000-0effffff : System RAM
00200000-00b47f87 : Kernel code
00b47f88-00dfffff : Kernel data
00e60000-01f73c7f : Kernel bss
1a000000-1bffffff : pci@1a000000
...
With this patch:
After increasing crash_base <= 0 handling.
And the iomem as follows:
00200000-0effffff : System RAM
00200000-00b47f87 : Kernel code
00b47f88-00dfffff : Kernel data
00e60000-01f73c7f : Kernel bss
04000000-09ffffff : Crash kernel
1a000000-1bffffff : pci@1a000000
...
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When I update the latest kernel on the Loongson platform used with
LS7A bridge chip, the serial console has no output, this is because
the machine uses LS7A UART0 instead of CPU UART0, add UART node for
LS7A PCH to enhance the compatibility.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add 'cpus' node to the jz4725b.dtsi, jz4740.dtsi, jz4770.dtsi,
jz4780.dtsi, x1000.dtsi, and x1830.dtsi files.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To clean up mach-* directories move external declaration of malta_dt_shim()
to mips-boards/malta.h and remove malta-dtshim.h.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Move HEART specific parts of mach-ip30/irq.h to asm/sgi/heart.h and IP30
specific parts to sgi-ip30/ip30-common.h.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson-3 has 16-bytes load/store instructions: gslq and gssq. This
patch calculate ra properly when unwinding the stack, if ra is saved
by gssq and restored by gslq.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loongson-3's COP2 is Multi-Media coprocessor, it is disabled in kernel
mode by default. However, gslq/gssq (16-bytes load/store instructions)
overrides the instruction format of lwc2/swc2. If we wan't to use gslq/
gssq for optimization in kernel, we should enable COP2 usage in kernel.
Please pay attention that in this patch we only enable COP2 in kernel,
which means it will lose ST0_CU2 when a process go to user space (try
to use COP2 in user space will trigger an exception and then grab COP2,
which is similar to FPU). And as a result, we need to modify the context
switching code because the new scheduled process doesn't contain ST0_CU2
in its THERAD_STATUS probably.
For zboot, we disable gslq/gssq be generated by toolchain.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some processors (such as Loongson-3) need to enable CU2 in kernel mode,
current set/clear method will lose Status.CU2 during context switching,
so use save/restore method instead.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch/mips/kernel/branch.c:876:5: error: no previous prototype for '__insn_is_compact_branch' [-Werror=missing-prototypes]
Signed-off-by: Pujin Shi <shipujin.t@gmail.com>
Signed-off-by: Pujin Shi <shipj@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This addresses the following sparse warning:
arch/mips/kernel/setup.c:446:33: warning: symbol 'setup_elfcorehdr_size'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
For each board the MACH_INGENIC_SOC option was selected instead of
MACH_INGENIC. Nothing else was changed in the menuconfig.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Now that all the jz4740 platform code has been removed, and we're left
with only a Kconfig and the cpu-feature-overrides.h file, finalize the
cleanup process by renaming the jz4740 and include/mach-jz4740 folders
to ingenic and include/mach-ingenic.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Support for Ingenic SoCs is now provided by the arch/mips/generic/ code,
so all files in the arch/mips/jz4740/ folder can dropped, except for the
Kconfig, and the cpu-feature-overrides.h header file.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add support for Ingenic SoCs in arch/mips/generic/.
The Kconfig changes are here to ensure that it is possible to compile
either a generic kernel that supports Ingenic SoCs, or a Ingenic-only
kernel, both using the same code base, to avoid duplicated code.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
128 IRQs is not enough to support Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no reason we can't create compressed kernels here, so select
the option SYS_SUPPORTS_ZBOOT.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The plat_get_fdt() checked that the kernel was booted using UHI before
reading the 'fw_passed_dtb' variable. However, this variable is also set
when the DT has been appended, or when it has been built into the kernel.
Support these usecases by removing the UHI check.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The function bootcmdline_init() in arch/mips/kernel/setup.c will
populate the boot_command_line string using the parameters hardcoded in
the kernel, and those provided in the devicetree file. Then, it would
append the content of the arcs_cmdline variable, which is filled by the
board's plat_mem_setup() function.
The plat_mem_setup() function for the generic MIPS board would just copy
the current boot_command_line to arcs_cmdline, which is nonsense for two
reasons:
- the result will be appended to the boot_command_line anyway, so all it
does is duplicate every single parameter on the command line;
- the code did not perform at all what it's supposed to, which is to
retrieve the parameters passed by the bootloader.
Fix this by calling fw_init_cmdline() in plat_mem_setup(), which will
properly initialize arcs_cmdline to the parameters passed by the
bootloader.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Check for the system_type variable in the get_system_type() function. If
non-NULL, return it as the system type.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The MIPS_GENERIC symbol now won't select any other configuration option.
The MIPS_GENERIC_KERNEL will select all the options that the previous
MIPS_GENERIC option did select, and will select MIPS_GENERIC as well.
The whole point of this, is that it now becomes possible to compile a
kernel for a SoC supported by the arch/mips/generic/ code, without
making that kernel generic itself.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The previous code was doing:
BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
This only worked as the "cpu_has_counter" macro was overridden in
<cpu-feature-overrides.h>. The default "cpu_has_counter" macro is
non-constant, which triggered the BUG_ON() independently of the value
returned by the macro.
What we want to check here, is that *if* the macro was overridden to a
compile-time constant, then must be defined to zero, otherwise it's a
bug.
So the correct check is:
BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter);
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
XBurst CPUs present in Ingenic SoCs have virtually tagged caches,
according to the <cpu-features-override.h> header.
Add that information to cpu_probe_ingenic().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Previously, in cpu_probe_ingenic(), c->writecombine was set to
_CACHE_UNCACHED_ACCELERATED, but this macro was defined differently when
CONFIG_MACH_INGENIC was set. This made it impossible to support multiple
CPUs.
Address this issue by setting c->writecombine to _CACHE_CACHABLE_WA
directly and removing the dependency on CONFIG_MACH_INGENIC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since INGENIC_GENERIC_BOARD was introduced, the JZ4740_QI_LB60 option
is no longer the default, so the symbol has to be selected by the
defconfig, otherwise the kernel built will be for a generic Ingenic
board and won't have the Device Tree blob built-in.
Cc: stable@vger.kernel.org # v5.7
Fixes: 62249209a7 ("MIPS: ingenic: Default to a generic board")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
