sb_write_pointer() returns the write position of next superblock. For READ,
we need a previous location. When the pointer is at the head, the previous
one is the last one of the other zone. Calculate the last one's position
from zone capacity.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We cannot write beyond zone capacity. So, we should consider a zone as
"full" when the write pointer goes beyond capacity - the size of super
info.
Also, take this opportunity to replace a subtle duplicated code with a loop
and fix a typo in comment.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the introduction of zone capacity, the range [capacity, length] is
always zone unusable. Counting this region as a reclaim target will
cause reclaiming too early. Reclaim block groups based on bytes that can
be usable after resetting.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we introduced capacity in a block group, we need to calculate free
space using the capacity instead of the length. Thus, bytes we account
capacity - alloc_pointer as free, and account bytes [capacity, length] as
zone unusable.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_free_excluded_extents() is not neccessary for
btrfs_calc_zone_unusable() and it makes btrfs_calc_zone_unusable()
difficult to reuse. Move it out and call btrfs_free_excluded_extents()
in proper context.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The ZNS specification introduces the concept of a Zone Capacity. A zone
capacity is an additional per-zone attribute that indicates the number of
usable logical blocks within each zone, starting from the first logical
block of each zone. It is always smaller or equal to the zone size.
With the SINGLE profile, we can set a block group's "capacity" as the same
as the underlying zone's Zone Capacity. We will limit the allocation not
to exceed in a following commit.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the new infrastructure which has taken subpage into consideration,
now we should be safe to allow defrag to work for subpage case.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the old infrastructure can all be removed, defrag
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function defrag_one_cluster() is able to defrag one range well
enough, we only need to do preparation for it, including:
- Clamp and align the defrag range
- Exclude invalid cases
- Proper inode locking
The old infrastructures will not be removed in this patch, as it would
be too noisy to review.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new helper, defrag_one_cluster(), will defrag one cluster (at most
256K):
- Collect all initial targets
- Kick in readahead when possible
- Call defrag_one_range() on each initial target
With some extra range clamping.
- Update @sectors_defragged parameter
This involves one behavior change, the defragged sectors accounting is
no longer as accurate as old behavior, as the initial targets are not
consistent.
We can have new holes punched inside the initial target, and we will
skip such holes later.
But the defragged sectors accounting doesn't need to be that accurate
anyway, thus I don't want to pass those extra accounting burden into
defrag_one_range().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_range(), is introduced to defrag one range.
This function will mostly prepare the needed pages and extent status for
defrag_one_locked_target().
As we can only have a consistent view of extent map with page and extent
bits locked, we need to re-check the range passed in to get a real
target list for defrag_one_locked_target().
Since defrag_collect_targets() will call defrag_lookup_extent() and lock
extent range, we also need to teach those two functions to skip extent
lock. Thus new parameter, @locked, is introduced to skip extent lock if
the caller has already locked the range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A new helper, defrag_one_locked_target(), introduced to do the real part
of defrag.
The caller needs to ensure both page and extents bits are locked, and no
ordered extent exists for the range, and all writeback is finished.
The core defrag part is pretty straight-forward:
- Reserve space
- Set extent bits to defrag
- Update involved pages to be dirty
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a helper, defrag_collect_targets(), to collect all possible
targets to be defragged.
This function will not consider things like max_sectors_to_defrag, thus
caller should be responsible to ensure we don't exceed the limit.
This function will be the first stage of later defrag rework.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In cluster_pages_for_defrag(), we have complex code block inside one
for() loop.
The code block is to prepare one page for defrag, this will ensure:
- The page is locked and set up properly.
- No ordered extent exists in the page range.
- The page is uptodate.
This behavior is pretty common and will be reused by later defrag
rework.
So factor out the code into its own helper, defrag_prepare_one_page(),
for later usage, and cleanup the code by a little.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When testing subpage defrag support, I always find some strange inode
nbytes error, after a lot of debugging, it turns out that
defrag_lookup_extent() is using PAGE_SIZE as size for
lookup_extent_mapping().
Since lookup_extent_mapping() is calling __lookup_extent_mapping() with
@strict == 1, this means any extent map smaller than one page will be
ignored, prevent subpage defrag to grab a correct extent map.
There are quite some PAGE_SIZE usage in ioctl.c, but most of them are
correct usages, and can be one of the following cases:
- ioctl structure size check
We want ioctl structure to be contained inside one page.
- real page operations
The remaining cases in defrag_lookup_extent() and
check_defrag_in_cache() will be addressed in this patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function cluster_pages_for_defrag() we have a window where we unlock
page, either start the ordered range or read the content from disk.
When we re-lock the page, we need to make sure it still has the correct
page->private for subpage.
Thus add the extra PagePrivate check here to handle subpage cases
properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_defrag_file() accepts both "struct inode" and "struct
file" as parameter. We can easily grab "struct inode" from "struct
file" using file_inode() helper.
The reason why we need "struct file" is just to re-use its f_ra.
Change this to pass "struct file_ra_state" parameter, so that it's more
clear what we really want. Since we're here, also add some comments on
the function btrfs_defrag_file().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_chunk_readonly() checks if the given chunk is writeable. It
returns 1 for readonly, and 0 for writeable. So the return argument type
bool shall suffice instead of the current type int.
Also, rename btrfs_chunk_readonly() to btrfs_chunk_writeable() as we
check if the bg is writeable, and helps to keep the logic at the parent
function simpler to understand.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a warning reported by smatch that ret could be returned without
initialized. The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use u16 bitmap to make 4k sectorsize work for 64K page
size.
But this u16 bitmap is not large enough to contain larger page size like
128K, nor is space efficient for 16K page size.
To handle both cases, here we pack all subpage bitmaps into a larger
bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for
subpage usage.
Each sub-bitmap will has its start bit number recorded in
btrfs_subpage_info::*_start, and its bitmap length will be recorded in
btrfs_subpage_info::bitmap_nr_bits.
All subpage bitmap operations will be converted from using direct u16
operations to bitmap operations, with above *_start calculated.
For 64K page size with 4K sectorsize, this should not cause much
difference.
While for 16K page size, we will only need 1 unsigned long (u32) to
store all the bitmaps, which saves quite some space.
Furthermore, this allows us to support larger page size like 128K and
258K.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine
for 4K sectorsize with 64K page size.
But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.
Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.
By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two call sites of btrfs_alloc_subpage():
- btrfs_attach_subpage()
We have ensured sectorsize is smaller than PAGE_SIZE
- alloc_extent_buffer()
We call btrfs_alloc_subpage() unconditionally.
The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().
Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update it since commit 944d3f9fac ("btrfs: switch seed device to
list api") did conversion from fs_devices::seed to fs_devices::seed_list.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need for the variable ret after d66105cfa873 ("btrfs:
allocate btrfs_ioctl_quota_rescan_args on stack"), remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The out label is being overused, we can simply return if the condition
permits.
No functional changes.
Reviewed-by: Su Yue <l@damenly.su>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The user facing function used to allocate new chunks is
btrfs_chunk_alloc, unfortunately there is yet another similar sounding
function - btrfs_alloc_chunk. This creates confusion, especially since
the latter function can be considered "private" in the sense that it
implements the first stage of chunk creation and as such is called by
btrfs_chunk_alloc.
To avoid the awkwardness that comes with having similarly named but
distinctly different in their purpose function rename btrfs_alloc_chunk
to btrfs_create_chunk, given that the main purpose of this function is
to orchestrate the whole process of allocating a chunk - reserving space
into devices, deciding on characteristics of the stripe size and
creating the in-memory structures.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=u3qV
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more error handling fixes, stemming from code inspection, error
injection or fuzzing"
* tag 'for-5.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix abort logic in btrfs_replace_file_extents
btrfs: check for error when looking up inode during dir entry replay
btrfs: unify lookup return value when dir entry is missing
btrfs: deal with errors when adding inode reference during log replay
btrfs: deal with errors when replaying dir entry during log replay
btrfs: deal with errors when checking if a dir entry exists during log replay
btrfs: update refs for any root except tree log roots
btrfs: unlock newly allocated extent buffer after error
Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file. This
occurs because the if statement to decide if we should abort is wrong.
The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code. However the
prealloc code uses this path too. Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code.
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At replay_one_name(), we are treating any error from btrfs_lookup_inode()
as if the inode does not exists. Fix this by checking for an error and
returning it to the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.
However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.
Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __inode_add_ref(), we treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At replay_one_one(), we are treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.
Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I hit a stuck relocation on btrfs/061 during my overnight testing. This
turned out to be because we had left over extent entries in our extent
root for a data reloc inode that no longer existed. This happened
because in btrfs_drop_extents() we only update refs if we have SHAREABLE
set or we are the tree_root. This regression was introduced by
aeb935a455 ("btrfs: don't set SHAREABLE flag for data reloc tree")
where we stopped setting SHAREABLE for the data reloc tree.
The problem here is we actually do want to update extent references for
data extents in the data reloc tree, in fact we only don't want to
update extent references if the file extents are in the log tree.
Update this check to only skip updating references in the case of the
log tree.
This is relatively rare, because you have to be running scrub at the
same time, which is what btrfs/061 does. The data reloc inode has its
extents pre-allocated, and then we copy the extent into the
pre-allocated chunks. We theoretically should never be calling
btrfs_drop_extents() on a data reloc inode. The exception of course is
with scrub, if our pre-allocated extent falls inside of the block group
we are scrubbing, then the block group will be marked read only and we
will be forced to cow that extent. This means we will call
btrfs_drop_extents() on that range when we COW that file extent.
This isn't really problematic if we do this, the data reloc inode
requires that our extent lengths match exactly with the extent we are
copying, thankfully we validate the extent is correct with
get_new_location(), so if we happen to COW only part of the extent we
won't link it in when we do the relocation, so we are safe from any
other shenanigans that arise because of this interaction with scrub.
Fixes: aeb935a455 ("btrfs: don't set SHAREABLE flag for data reloc tree")
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=VJFC
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix for leak of transaction handle after verity rollback
failure
- properly reset device last error between mounts
- improve one error handling case when checksumming bios
- fixup confusing displayed size of space info free space
* tag 'for-5.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent __btrfs_dump_space_info() to underflow its free space
btrfs: fix mount failure due to past and transient device flush error
btrfs: fix transaction handle leak after verity rollback failure
btrfs: replace BUG_ON() in btrfs_csum_one_bio() with proper error handling
It's not uncommon where __btrfs_dump_space_info() gets called
under over-commit situations.
In that case free space would underflow as total allocated space is not
enough to handle all the over-committed space.
Such underflow values can sometimes cause confusion for users enabled
enospc_debug mount option, and takes some seconds for developers to
convert the underflow value to signed result.
Just output the free space as s64 to avoid such problem.
Reported-by: Eli V <eliventer@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJtFHUSy4zgyhf-4d9T+KdJp9w=UgzC2A0V=VtmaeEpcGgm1-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we get an error flushing one device, during a super block commit, we
record the error in the device structure, in the field 'last_flush_error'.
This is used to later check if we should error out the super block commit,
depending on whether the number of flush errors is greater than or equals
to the maximum tolerated device failures for a raid profile.
However if we get a transient device flush error, unmount the filesystem
and later try to mount it, we can fail the mount because we treat that
past error as critical and consider the device is missing. Even if it's
very likely that the error will happen again, as it's probably due to a
hardware related problem, there may be cases where the error might not
happen again. One example is during testing, and a test case like the
new generic/648 from fstests always triggers this. The test cases
generic/019 and generic/475 also trigger this scenario, but very
sporadically.
When this happens we get an error like this:
$ mount /dev/sdc /mnt
mount: /mnt wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error.
$ dmesg
(...)
[12918.886926] BTRFS warning (device sdc): chunk 13631488 missing 1 devices, max tolerance is 0 for writable mount
[12918.888293] BTRFS warning (device sdc): writable mount is not allowed due to too many missing devices
[12918.890853] BTRFS error (device sdc): open_ctree failed
The failure happens because when btrfs_check_rw_degradable() is called at
mount time, or at remount from RO to RW time, is sees a non zero value in
a device's ->last_flush_error attribute, and therefore considers that the
device is 'missing'.
Fix this by setting a device's ->last_flush_error to zero when we close a
device, making sure the error is not seen on the next mount attempt. We
only need to track flush errors during the current mount, so that we never
commit a super block if such errors happened.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a verity rollback, if we fail to update the inode or delete the
orphan, we abort the transaction and return without releasing our
transaction handle. Fix that by releasing the handle.
Fixes: 146054090b ("btrfs: initial fsverity support")
Fixes: 705242538f ("btrfs: verity metadata orphan items")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a BUG_ON() in btrfs_csum_one_bio() to catch code logic error.
It has indeed caught several bugs during subpage development.
But the BUG_ON() itself will bring down the whole system which is
an overkill.
Replace it with a WARN() and exit gracefully, so that it won't crash the
whole system while we can still catch the code logic error.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmE6BpMACgkQxWXV+ddt
WDvXhA//aaeKQIiVbiCnmMKFVX08wU8/pUXf65TJIaaTd0KE0QMu/aW6ibOpC6QI
auf7wTiErHoJM7A22nL+Eoic7shlPueBktt3YcmdyQ/3ZFR6Wr7Td/cby0FvTOJU
m0bjLMLp3rWSpnbMMUlOt8VSOcA892jnp7MHVtRYGfmfslwE5iTRtnPjmVobinm7
dfKxCXUgMG9NWINIJobn70GQsZCXipa1A+MdbkdIPyjbM+tgR0EXZBrSaEcgMVpV
dWnwTphx0io/tsgt4ZVQzGaCWtesBAe4yhaJJK92eFMTOKlYB/8y5P31N9wBL9Uj
AOn0ke2Uc/weah50W7AhxeU3nCSGUAl9DbGrovKEfP/p0T9NJC/l3P1gwqpeGuld
IbrBNFGVm3Noo2ZSoZU55P17gnTFHBMnXyVsbaoEldcsBv39D8K+tZ9F2vFaAV3e
VayZiUuw/PhEcucYCQKdUCwFqFjJJfNnYpNtMSY3aCHeTOjphrP2sWBxKNAkWChB
n4O5IFBm5e8YjBVNItZrlXE9KtE+JuwGSbNihhQQ/wy/M1sxB76DpaKnCLgjQmF6
peBZktTRr8X7aRs1BGQKrU7Yzq7oR1psYadUhGIrrWp/qS4UCXkvYnkMQ0FInyQH
pYQNHTDE4PSECzEhQAj9syeVE3lnGMGIWylmniamiuDsQcvaydM=
=RQSe
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix max_inline mount option limit on 64k page system
- lockdep fixes:
- update bdev time in a safer way
- move bdev put outside of sb write section when removing device
- fix possible deadlock when mounting seed/sprout filesystem
- zoned mode: fix split extent accounting
- minor include fixup
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix double counting of split ordered extent
btrfs: fix lockdep warning while mounting sprout fs
btrfs: delay blkdev_put until after the device remove
btrfs: update the bdev time directly when closing
btrfs: use correct header for div_u64 in misc.h
btrfs: fix upper limit for max_inline for page size 64K
btrfs_add_ordered_extent_*() add num_bytes to fs_info->ordered_bytes.
Then, splitting an ordered extent will call btrfs_add_ordered_extent_*()
again for split extents, leading to double counting of the region of
a split extent. These leaked bytes are finally reported at unmount time
as follow:
BTRFS info (device dm-1): at unmount dio bytes count 364544
Fix the double counting by subtracting split extent's size from
fs_info->ordered_bytes.
Fixes: d22002fd37 ("btrfs: zoned: split ordered extent when bio is sent")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When removing the device we call blkdev_put() on the device once we've
removed it, and because we have an EXCL open we need to take the
->open_mutex on the block device to clean it up. Unfortunately during
device remove we are holding the sb writers lock, which results in the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #407 Not tainted
------------------------------------------------------
losetup/11595 is trying to acquire lock:
ffff973ac35dd138 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_put+0x3a/0x220
btrfs_rm_device.cold+0x62/0xe5
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11595:
#0: ffff973ac9812c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 0 PID: 11595 Comm: losetup Not tainted 5.14.0-rc2+ #407
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc21255d4cb
So instead save the bdev and do the put once we've dropped the sb
writers lock in order to avoid the lockdep recursion.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We update the ctime/mtime of a block device when we remove it so that
blkid knows the device changed. However we do this by re-opening the
block device and calling filp_update_time. This is more correct because
it'll call the inode->i_op->update_time if it exists, but the block dev
inodes do not do this. Instead call generic_update_time() on the
bd_inode in order to avoid the blkdev_open path and get rid of the
following lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #406 Not tainted
------------------------------------------------------
losetup/11596 is trying to acquire lock:
ffff939640d2f538 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0
but task is already holding lock:
ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
lo_open+0x28/0x60 [loop]
blkdev_get_whole+0x25/0xf0
blkdev_get_by_dev.part.0+0x168/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
do_sys_openat2+0x7b/0x130
__x64_sys_openat+0x46/0x70
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #3 (&disk->open_mutex){+.+.}-{3:3}:
__mutex_lock+0x7d/0x750
blkdev_get_by_dev.part.0+0x56/0x3c0
blkdev_open+0xd2/0xe0
do_dentry_open+0x161/0x390
path_openat+0x3cc/0xa20
do_filp_open+0x96/0x120
file_open_name+0xc7/0x170
filp_open+0x2c/0x50
btrfs_scratch_superblocks.part.0+0x10f/0x170
btrfs_rm_device.cold+0xe8/0xed
btrfs_ioctl+0x2a31/0x2e70
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #2 (sb_writers#12){.+.+}-{0:0}:
lo_write_bvec+0xc2/0x240 [loop]
loop_process_work+0x238/0xd00 [loop]
process_one_work+0x26b/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
process_one_work+0x245/0x560
worker_thread+0x55/0x3c0
kthread+0x140/0x160
ret_from_fork+0x1f/0x30
-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
flush_workqueue+0x91/0x5e0
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of:
(wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&lo->lo_mutex);
lock(&disk->open_mutex);
lock(&lo->lo_mutex);
lock((wq_completion)loop0);
*** DEADLOCK ***
1 lock held by losetup/11596:
#0: ffff939655510c68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]
stack backtrace:
CPU: 1 PID: 11596 Comm: losetup Not tainted 5.14.0-rc2+ #406
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack_lvl+0x57/0x72
check_noncircular+0xcf/0xf0
? stack_trace_save+0x3b/0x50
__lock_acquire+0x10ea/0x1d90
lock_acquire+0xb5/0x2b0
? flush_workqueue+0x67/0x5e0
? lockdep_init_map_type+0x47/0x220
flush_workqueue+0x91/0x5e0
? flush_workqueue+0x67/0x5e0
? verify_cpu+0xf0/0x100
drain_workqueue+0xa0/0x110
destroy_workqueue+0x36/0x250
__loop_clr_fd+0x9a/0x660 [loop]
? blkdev_ioctl+0x8d/0x2a0
block_ioctl+0x3f/0x50
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
asm/do_div.h is for div_u64, but it is found in math64.h. This change
will make compiler job easier and prevent compiler errors in situation
where compiler will not find math64.h from another paths.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option max_inline ranges from 0 to the sectorsize (which is
now equal to page size). But we parse the mount options too early and
before the actual sectorsize is read from the superblock. So the upper
limit of max_inline is unaware of the actual sectorsize and is limited
by the temporary sectorsize 4096, even on a system where the default
sectorsize is 64K.
Fix this by reading the superblock sectorsize before the mount option
parse.
Reported-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYTDKKAAKCRDh3BK/laaZ
PG9PAQCUF0fdBlCKudwSEt5PV5xemycL9OCAlYCd7d4XbBIe9wEA6sVJL9J+OwV2
aF0NomiXtJccE+S9+byjVCyqSzQJGQQ=
=6L2Y
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs update from Miklos Szeredi:
- Copy up immutable/append/sync/noatime attributes (Amir Goldstein)
- Improve performance by enabling RCU lookup.
- Misc fixes and improvements
The reason this touches so many files is that the ->get_acl() method now
gets a "bool rcu" argument. The ->get_acl() API was updated based on
comments from Al and Linus:
Link: https://lore.kernel.org/linux-fsdevel/CAJfpeguQxpd6Wgc0Jd3ks77zcsAv_bn0q17L3VNnnmPKu11t8A@mail.gmail.com/
* tag 'ovl-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: enable RCU'd ->get_acl()
vfs: add rcu argument to ->get_acl() callback
ovl: fix BUG_ON() in may_delete() when called from ovl_cleanup()
ovl: use kvalloc in xattr copy-up
ovl: update ctime when changing fileattr
ovl: skip checking lower file's i_writecount on truncate
ovl: relax lookup error on mismatch origin ftype
ovl: do not set overlay.opaque for new directories
ovl: add ovl_allow_offline_changes() helper
ovl: disable decoding null uuid with redirect_dir
ovl: consistent behavior for immutable/append-only inodes
ovl: copy up sync/noatime fileattr flags
ovl: pass ovl_fs to ovl_check_setxattr()
fs: add generic helper for filling statx attribute flags
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback errors
are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string.
-----BEGIN PGP SIGNATURE-----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=iVns
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The most notable externally visible change for this cycle is the
addition of support for reads to inline tail fragments of files, which
was requested by the erofs developers; and a correction for a kernel
memory corruption bug if the sysadmin tries to activate a swapfile
with more pages than the swapfile header suggests.
We also now report writeback completion errors to the file mapping
correctly, instead of munging all errors into EIO.
Internally, the bulk of the changes are Christoph's patchset to reduce
the indirect function call count by a third to a half by converting
iomap iteration from a loop pattern to a generator/consumer pattern.
As an added bonus, fsdax no longer open-codes iomap apply loops.
Summary:
- Simplify the bio_end_page usage in the buffered IO code.
- Support reading inline data at nonzero offsets for erofs.
- Fix some typos and bad grammar.
- Convert kmap_atomic usage in the inline data read path.
- Add some extra inline data input checking.
- Fix a memory corruption bug stemming from iomap_swapfile_activate
trying to activate more pages than mm was expecting.
- Pass errnos through the page writeback code so that writeback
errors are reported correctly instead of being munged to EIO.
- Replace iomap_apply with a open-coded iterator loops to reduce the
number of indirect calls by a third to a half.
- Refactor the fsdax code to use iomap iterators instead of the
open-coded iomap_apply code that it had before.
- Format file range iomap tracepoint data in hexadecimal and
standardize the names used in the pretty-print string"
* tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
iomap: standardize tracepoint formatting and storage
mm/swap: consider max pages in iomap_swapfile_add_extent
iomap: move loop control code to iter.c
iomap: constify iomap_iter_srcmap
fsdax: switch the fault handlers to use iomap_iter
fsdax: factor out a dax_fault_actor() helper
fsdax: factor out helpers to simplify the dax fault code
iomap: rework unshare flag
iomap: pass an iomap_iter to various buffered I/O helpers
iomap: remove iomap_apply
fsdax: switch dax_iomap_rw to use iomap_iter
iomap: switch iomap_swapfile_activate to use iomap_iter
iomap: switch iomap_seek_data to use iomap_iter
iomap: switch iomap_seek_hole to use iomap_iter
iomap: switch iomap_bmap to use iomap_iter
iomap: switch iomap_fiemap to use iomap_iter
iomap: switch __iomap_dio_rw to use iomap_iter
iomap: switch iomap_page_mkwrite to use iomap_iter
iomap: switch iomap_zero_range to use iomap_iter
iomap: switch iomap_file_unshare to use iomap_iter
...
-----BEGIN PGP SIGNATURE-----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=ALO9
-----END PGP SIGNATURE-----
Merge tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The highlights of this round are integrations with fs-verity and
idmapped mounts, the rest is usual mix of minor improvements, speedups
and cleanups.
There are some patches outside of btrfs, namely updating some VFS
interfaces, all straightforward and acked.
Features:
- fs-verity support, using standard ioctls, backward compatible with
read-only limitation on inodes with previously enabled fs-verity
- idmapped mount support
- make mount with rescue=ibadroots more tolerant to partially damaged
trees
- allow raid0 on a single device and raid10 on two devices,
degenerate cases but might be useful as an intermediate step during
conversion to other profiles
- zoned mode block group auto reclaim can be disabled via sysfs knob
Performance improvements:
- continue readahead of node siblings even if target node is in
memory, could speed up full send (on sample test +11%)
- batching of delayed items can speed up creating many files
- fsync/tree-log speedups
- avoid unnecessary work (gains +2% throughput, -2% run time on
sample load)
- reduced lock contention on renames (on dbench +4% throughput,
up to -30% latency)
Fixes:
- various zoned mode fixes
- preemptive flushing threshold tuning, avoid excessive work on
almost full filesystems
Core:
- continued subpage support, preparation for implementing remaining
features like compression and defragmentation; with some
limitations, write is now enabled on 64K page systems with 4K
sectors, still considered experimental
- no readahead on compressed reads
- inline extents disabled
- disabled raid56 profile conversion and mount
- improved flushing logic, fixing early ENOSPC on some workloads
- inode flags have been internally split to read-only and read-write
incompat bit parts, used by fs-verity
- new tree items for fs-verity
- descriptor item
- Merkle tree item
- inode operations extended to be namespace-aware
- cleanups and refactoring
Generic code changes:
- fs: new export filemap_fdatawrite_wbc
- fs: removed sync_inode
- block: bio_trim argument type fixups
- vfs: add namespace-aware lookup"
* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
btrfs: reset replace target device to allocation state on close
btrfs: zoned: fix ordered extent boundary calculation
btrfs: do not do preemptive flushing if the majority is global rsv
btrfs: reduce the preemptive flushing threshold to 90%
btrfs: tree-log: check btrfs_lookup_data_extent return value
btrfs: avoid unnecessarily logging directories that had no changes
btrfs: allow idmapped mount
btrfs: handle ACLs on idmapped mounts
btrfs: allow idmapped INO_LOOKUP_USER ioctl
btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
btrfs: allow idmapped SNAP_DESTROY ioctls
btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
btrfs: check whether fsgid/fsuid are mapped during subvolume creation
btrfs: allow idmapped permission inode op
btrfs: allow idmapped setattr inode op
btrfs: allow idmapped tmpfile inode op
btrfs: allow idmapped symlink inode op
btrfs: allow idmapped mkdir inode op
...
-----BEGIN PGP SIGNATURE-----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=jN7s
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that I think qualifies for a late merge. It's a revert of
a one-liner fix that meanwhile got backported to stable kernels and we
got reports from users.
The broken fix prevents creating compressed inline extents, which
could be noticeable on space consumption.
Technically it's a regression as the patch was merged in 5.14-rc1 but
got propagated to several stable kernels and has higher exposure than
a 'typical' development cycle bug"
* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: don't try to compress if we don't have enough pages"
This reverts commit f216562731.
[BUG]
It's no longer possible to create compressed inline extent after commit
f216562731 ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f216562731 ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a6166768 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b81 ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A common characteristic of the bug report where preemptive flushing was
going full tilt was the fact that the vast majority of the free metadata
space was used up by the global reserve. The hard 90% threshold would
cover the majority of these cases, but to be even smarter we should take
into account how much of the outstanding reservations are covered by the
global block reserve. If the global block reserve accounts for the vast
majority of outstanding reservations, skip preemptive flushing, as it
will likely just cause churn and pain.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The preemptive flushing code was added in order to avoid needing to
synchronously wait for ENOSPC flushing to recover space. Once we're
almost full however we can essentially flush constantly. We were using
98% as a threshold to determine if we were simply full, however in
practice this is a really high bar to hit. For example reports of
systems running into this problem had around 94% usage and thus
continued to flush. Fix this by lowering the threshold to 90%, which is
a more sane value, especially for smaller file systems.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212185
CC: stable@vger.kernel.org # 5.12+
Fixes: 576fa34830 ("btrfs: improve preemptive background space flushing")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_lookup_data_extent calls btrfs_search_slot to verify if
the EXTENT_ITEM exists in the extent tree. btrfs_search_slot can return
values bellow zero if an error happened.
Function replay_one_extent currently checks if the search found
something (0 returned) and increments the reference, and if not, it
seems to evaluate as 'not found'.
Fix the condition by checking if the value was bellow zero and return
early.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cases where when logging an inode we need to log its
parent directories or logging subdirectories when logging a directory.
There are cases however where we end up logging a directory even if it was
not changed in the current transaction, no dentries added or removed since
the last transaction. While this is harmless from a functional point of
view, it is a waste time as it brings no advantage.
One example where this is triggered is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ mkdir /mnt/C
$ touch /mnt/A/foo
$ ln /mnt/A/foo /mnt/B/bar
$ ln /mnt/A/foo /mnt/C/baz
$ sync
$ rm -f /mnt/A/foo
$ xfs_io -c "fsync" /mnt/B/bar
This last fsync ends up logging directories A, B and C, however we only
need to log directory A, as B and C were not changed since the last
transaction commit.
So fix this by changing need_log_inode(), to return false in case the
given inode is a directory and has a ->last_trans value smaller than the
current transaction's ID.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we converted btrfs internally to account for idmapped mounts
allow the creation of idmapped mounts on by setting the FS_ALLOW_IDMAP
flag. We only need to raise this flag on the btrfs_root_fs_type
filesystem since btrfs_mount_root() is ultimately responsible for
allocating the superblock and is called into from btrfs_mount()
associated with btrfs_fs_type.
The conversion of the btrfs inode operations was straightforward.
Regarding btrfs specific ioctls that perform checks based on inode
permissions only those have been allowed that are not filesystem wide
operations and hence can be reasonably charged against a specific mount.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the ACL code idmapped mount aware. The POSIX default and POSIX
access ACLs are the only ACLs other than some specific xattrs that take
DAC permissions into account. On an idmapped mount they need to be
translated according to the mount's userns. The main change is done to
__btrfs_set_acl() which is responsible for translating POSIX ACLs to
their final on-disk representation.
The btrfs_init_acl() helper does not need to take the idmapped mount
into account since it is called in the context of file creation
operations (mknod, create, mkdir, symlink, tmpfile) and is used for
btrfs_init_inode_security() to copy POSIX default and POSIX access
permissions from the parent directory. These ACLs need to be inherited
unmodified from the parent directory. This is identical to what we do
for ext4 and xfs.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The INO_LOOKUP_USER is an unprivileged version of the INO_LOOKUP ioctl
and has the following restrictions. The main difference between the two
is that INO_LOOKUP is filesystem wide operation wheres INO_LOOKUP_USER
is scoped beneath the file descriptor passed with the ioctl.
Specifically, INO_LOOKUP_USER must adhere to the following restrictions:
- The caller must be privileged over each inode of each path component
for the path they are trying to lookup.
- The path for the subvolume the caller is trying to lookup must be reachable
from the inode associated with the file descriptor passed with the ioctl.
The second condition makes it possible to scope the lookup of the path
to the mount identified by the file descriptor passed with the ioctl.
This allows us to enable this ioctl on idmapped mounts.
Specifically, this is possible because all child subvolumes of a parent
subvolume are reachable when the parent subvolume is mounted. So if the
user had access to open the parent subvolume or has been given the fd
then they can lookup the path if they had access to it provided they
were privileged over each path component.
Note, the INO_LOOKUP_USER ioctl allows a user to learn the path and name
of a subvolume even though they would otherwise be restricted from doing
so via regular VFS-based lookup.
So think about a parent subvolume with multiple child subvolumes.
Someone could mount he parent subvolume and restrict access to the child
subvolumes by overmounting them with empty directories. At this point
the user can't traverse the child subvolumes and they can't open files
in the child subvolumes. However, they can still learn the path of
child subvolumes as long as they have access to the parent subvolume by
using the INO_LOOKUP_USER ioctl.
The underlying assumption here is that it's ok that the lookup ioctls
can't really take mounts into account other than the original mount the
fd belongs to during lookup. Since this assumption is baked into the
original INO_LOOKUP_USER ioctl we can extend it to idmapped mounts.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Setting flags on subvolumes or snapshots are core features of btrfs. The
SUBVOL_SETFLAGS ioctl is especially important as it allows to make
subvolumes and snapshots read-only or read-write. Allow setting flags on
btrfs subvolumes and snapshots on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The SET_RECEIVED_SUBVOL ioctls are used to set information about
a received subvolume. Make it possible to set information about a
received subvolume on idmapped mounts. This is a fairly straightforward
operation since all the permission checking helpers are already capable
of handling idmapped mounts. So we just need to pass down the mount's
userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
So far we prevented the deletion of subvolumes and snapshots using
subvolume ids possible with the BTRFS_SUBVOL_SPEC_BY_ID flag.
This restriction is necessary on idmapped mounts as this allows
filesystem wide subvolume and snapshot deletions and thus can escape the
scope of what's exposed under the mount identified by the fd passed with
the ioctl.
Deletion by subvolume id works by looking for an alias of the parent of
the subvolume or snapshot to be deleted. The parent alias can be
anywhere in the filesystem. However, as long as the alias of the parent
that is found is the same as the one identified by the file descriptor
passed through the ioctl we can allow the deletion.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Destroying subvolumes and snapshots are important features of btrfs.
Both operations are available to unprivileged users if the filesystem
has been mounted with the "user_subvol_rm_allowed" mount option. Allow
subvolume and snapshot deletion on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Subvolumes and snapshots can either be deleted by specifying their name
or - if BTRFS_IOC_SNAP_DESTROY_V2 is used - by their subvolume or
snapshot id if the BTRFS_SUBVOL_SPEC_BY_ID is set.
This feature is blocked on idmapped mounts as this allows filesystem
wide subvolume deletions and thus can escape the scope of what's exposed
under the mount identified by the fd passed with the ioctl.
This means that even the root or CAP_SYS_ADMIN capable user can't delete
a subvolume via BTRFS_SUBVOL_SPEC_BY_ID. This is intentional.
The root user is currently already subject to permission checks in
btrfs_may_delete() including whether the inode's i_uid/i_gid of the
directory the subvolume is located in have a mapping in the caller's
idmapping. For this to fail isn't currently possible since a btrfs
filesystem can't be mounted with a non-initial idmapping but it shows
that even the root user would fail to delete a subvolume if the relevant
inode isn't mapped in their idmapping. The idmapped mount case is the
same in principle.
This isn't a huge problem a root user wanting to delete arbitrary
subvolumes can just always create another (even detached) mount without
an idmapping attached.
In addition, we will allow BTRFS_SUBVOL_SPEC_BY_ID for cases where the
subvolume to delete is directly located under inode referenced by the fd
passed for the ioctl() in a follow-up commit.
Here is an example where a btrfs subvolume is deleted through a
subvolume mount that does not expose the subvolume to be delete but it
can still be deleted by using the subvolume id:
/* Compile the following program as "delete_by_spec". */
#define _GNU_SOURCE
#include <fcntl.h>
#include <inttypes.h>
#include <linux/btrfs.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
static int rm_subvolume_by_id(int fd, uint64_t subvolid)
{
struct btrfs_ioctl_vol_args_v2 args = {};
int ret;
args.flags = BTRFS_SUBVOL_SPEC_BY_ID;
args.subvolid = subvolid;
ret = ioctl(fd, BTRFS_IOC_SNAP_DESTROY_V2, &args);
if (ret < 0)
return -1;
return 0;
}
int main(int argc, char *argv[])
{
int subvolid = 0;
if (argc < 3)
exit(1);
fprintf(stderr, "Opening %s\n", argv[1]);
int fd = open(argv[1], O_CLOEXEC | O_DIRECTORY);
if (fd < 0)
exit(2);
subvolid = atoi(argv[2]);
fprintf(stderr, "Deleting subvolume with subvolid %d\n", subvolid);
int ret = rm_subvolume_by_id(fd, subvolid);
if (ret < 0)
exit(3);
exit(0);
}
#include <stdio.h>"
#include <stdlib.h>"
#include <linux/btrfs.h"
truncate -s 10G btrfs.img
mkfs.btrfs btrfs.img
export LOOPDEV=$(sudo losetup -f --show btrfs.img)
mount ${LOOPDEV} /mnt
sudo chown $(id -u):$(id -g) /mnt
btrfs subvolume create /mnt/A
btrfs subvolume create /mnt/B/C
# Get subvolume id via:
sudo btrfs subvolume show /mnt/A
# Save subvolid
SUBVOLID=<nr>
sudo umount /mnt
sudo mount ${LOOPDEV} -o subvol=B/C,user_subvol_rm_allowed /mnt
./delete_by_spec /mnt ${SUBVOLID}
With idmapped mounts this can potentially be used by users to delete
subvolumes/snapshots they would otherwise not have access to as the
idmapping would be applied to an inode that is not exposed in the mount
of the subvolume.
The fact that this is a filesystem wide operation suggests it might be a
good idea to expose this under a separate ioctl that clearly indicates
this. In essence, the file descriptor passed with the ioctl is merely
used to identify the filesystem on which to operate when
BTRFS_SUBVOL_SPEC_BY_ID is used.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Creating subvolumes and snapshots is one of the core features of btrfs
and is even available to unprivileged users. Make it possible to use
subvolume and snapshot creation on idmapped mounts. This is a fairly
straightforward operation since all the permission checking helpers are
already capable of handling idmapped mounts. So we just need to pass
down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a new subvolume is created btrfs currently doesn't check whether
the fsgid/fsuid of the caller actually have a mapping in the user
namespace attached to the filesystem. The VFS always checks this to make
sure that the caller's fsgid/fsuid can be represented on-disk. This is
most relevant for filesystems that can be mounted inside user namespaces
but it is in general a good hardening measure to prevent unrepresentable
gid/uid from being written to disk.
Since we want to support idmapped mounts for btrfs ioctls to create
subvolumes in follow-up patches this becomes important since we want to
make sure the fsgid/fsuid of the caller as mapped according to the
idmapped mount can be represented on-disk. Simply add the missing
fsuidgid_has_mapping() line from the VFS may_create() version to
btrfs_may_create().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_permission() to handle idmapped mounts. This is just a
matter of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_setattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_tmpfile() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_symlink() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mkdir() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_create() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_mknod() to handle idmapped mounts. This is just a matter of
passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_getattr() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable btrfs_rename() to handle idmapped mounts. This is just a matter
of passing down the mount's userns.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extend btrfs_new_inode() to take the idmapped mount into account when
initializing a new inode. This is just a matter of passing down the
mount's userns. The rest is taken care of in inode_init_owner(). This is
a preliminary patch to make the individual btrfs inode operations
idmapped mount aware.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sysfs file has grown big. It takes some time to locate the correct
struct attribute to add new files. Create a table and map the struct
attribute to its sysfs path.
Also, fix the comment about the debug sysfs path. And add the comments
to the attributes instead of attribute group, where sysfs file names are
defined.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
It's easy to trigger NULL pointer dereference, just by removing a
non-existing device id:
# mkfs.btrfs -f -m single -d single /dev/test/scratch1 \
/dev/test/scratch2
# mount /dev/test/scratch1 /mnt/btrfs
# btrfs device remove 3 /mnt/btrfs
Then we have the following kernel NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 649 Comm: btrfs Not tainted 5.14.0-rc3-custom+ #35
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:btrfs_rm_device+0x4de/0x6b0 [btrfs]
btrfs_ioctl+0x18bb/0x3190 [btrfs]
? lock_is_held_type+0xa5/0x120
? find_held_lock.constprop.0+0x2b/0x80
? do_user_addr_fault+0x201/0x6a0
? lock_release+0xd2/0x2d0
? __x64_sys_ioctl+0x83/0xb0
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
[CAUSE]
Commit a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return
btrfs_device directly") moves the "missing" device path check into
btrfs_rm_device().
But btrfs_rm_device() itself can have case where it only receives
@devid, with NULL as @device_path.
In that case, calling strcmp() on NULL will trigger the NULL pointer
dereference.
Before that commit, we handle the "missing" case inside
btrfs_find_device_by_devspec(), which will not check @device_path at all
if @devid is provided, thus no way to trigger the bug.
[FIX]
Before calling strcmp(), also make sure @device_path is not NULL.
Fixes: a27a94c2b0 ("btrfs: Make btrfs_find_device_by_devspec return btrfs_device directly")
CC: stable@vger.kernel.org # 5.4+
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We call split_zoned_em() on an extent_map on submitting a bio for it. Thus,
we can assume the extent_map is PINNED, not LOGGING, and in the modified
list. Add ASSERT()s to ensure the extent_maps after the split also has the
proper flags set and are in the modified list.
Suggested-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
alloc_offset is offset from the start of a block group and @offset is
actually an address in logical space. Thus, we need to consider
block_group->start when calculating them.
Fixes: 011b41bffa ("btrfs: zoned: advance allocation pointer after tree log node")
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_relocate_chunk() can fail with -EAGAIN when e.g. send operations are
running. The message can fail btrfs/187 and it's unnecessary because we
anyway add it back to the reclaim list.
btrfs_reclaim_bgs_work()
`-> btrfs_relocate_chunk()
`-> btrfs_relocate_block_group()
`-> reloc_chunk_start()
`-> if (fs_info->send_in_progress)
`-> return -EAGAIN
CC: stable@vger.kernel.org # 5.13+
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Automatically reclaiming dirty zones might not always be desired for all
workloads, especially as there are currently still some rough edges with
the relocation code on zoned filesystems.
Allow disabling zone auto reclaim on a per filesystem basis by writing 0
as the threshold value.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A comment at log_conflicting_inodes() mentions that we check the inode's
logged_trans field instead of using btrfs_inode_in_log() because the field
last_log_commit is not updated when we log that an inode exists and the
inode has the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) set. The part
about the full sync flag is not true anymore since commit 9acc8103ab
("btrfs: fix unpersisted i_size on fsync after expanding truncate"), so
update the comment to not mention that part anymore.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we are checking if the inode's logged_trans is 0 to detect the
possibility of the inode having been evicted and reloaded, the test for
the full sync flag (BTRFS_INODE_NEEDS_FULL_SYNC) is no longer needed at
tree-log.c:inode_logged(). Its purpose was to detect the possibility
of a previous eviction as well, since when an inode is loaded the full
sync flag is always set on it (and only cleared after the inode is
logged).
So just remove the check and update the comment. The check for the inode's
logged_trans being 0 was added recently by the patch with the subject
"btrfs: eliminate some false positives when checking if inode was logged".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the very end of btrfs_rename_exchange(), in case an error happened, we
are checking if 'new_inode' is NULL, but that is not needed since during a
rename exchange, unlike regular renames, 'new_inode' can never be NULL,
and if it were, we would have a crashed much earlier when we dereference it
multiple times.
So remove the check because it is not necessary and because it is causing
static checkers to emit a warning. I probably introduced the check by
copy-pasting similar code from btrfs_rename(), where 'new_inode' can be
NULL, in commit 86e8aa0e77 ("Btrfs: unpin logs if rename exchange
operation fails").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate backref_ctx, allocate backref_ctx
on stack. The size is reasonably small.
sizeof(backref_ctx) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_defrag_range_args,
allocate btrfs_ioctl_defrag_range_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_defrag_range_args) = 48
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using kmalloc() to allocate btrfs_ioctl_quota_rescan_args,
allocate btrfs_ioctl_quota_rescan_args on stack, the size is reasonably
small and ioctls are called in process context.
sizeof(btrfs_ioctl_quota_rescan_args) = 64
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's a common practice to start a search using offset (u64)-1, which is
the u64 maximum value, meaning that we want the search_slot function to
be set in the last item with the same objectid and type.
Once we are in this position, it's a matter to start a search backwards
by calling btrfs_previous_item, which will check if we'll need to go to
a previous leaf and other necessary checks, only to be sure that we are
in last offset of the same object and type.
The new btrfs_search_backwards function does the all these steps when
necessary, and can be used to avoid code duplication.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As fsverity support depends on a config option, print that at module
load time like we do for similar features.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Writing out the verity data is too large of an operation to do in a
single transaction. If we are interrupted before we finish creating
fsverity metadata for a file, or fail to clean up already created
metadata after a failure, we could leak the verity items that we already
committed.
To address this issue, we use the orphan mechanism. When we start
enabling verity on a file, we also add an orphan item for that inode.
When we are finished, we delete the orphan. However, if we are
interrupted midway, the orphan will be present at mount and we can
cleanup the half-formed verity state.
There is a possible race with a normal unlink operation: if unlink and
verity run on the same file in parallel, it is possible for verity to
succeed and delete the still legitimate orphan added by unlink. Then, if
we are interrupted and mount in that state, we will never clean up the
inode properly. This is also possible for a file created with O_TMPFILE.
Check nlink==0 before deleting to avoid this race.
A final thing to note is that this is a resurrection of using orphans to
signal an operation besides "delete this inode". The old case was to
signal the need to do a truncate. That case still technically applies
for mounting very old file systems, so we need to take some care to not
clobber it. To that end, we just have to be careful that verity orphan
cleanup is a no-op for non-verity files.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, inode flags are fully backwards incompatible in btrfs. If we
introduce a new inode flag, then tree-checker will detect it and fail.
This can even cause us to fail to mount entirely. To make it possible to
introduce new flags which can be read-only compatible, like VERITY, we
add new ro flags to btrfs without treating them quite so harshly in
tree-checker. A read-only file system can survive an unexpected flag,
and can be mounted.
As for the implementation, it unfortunately gets a little complicated.
The on-disk representation of the inode, btrfs_inode_item, has an __le64
for flags but the in-memory representation, btrfs_inode, uses a u32.
David Sterba had the nice idea that we could reclaim those wasted 32 bits
on disk and use them for the new ro_compat flags.
It turns out that the tree-checker code which checks for unknown flags
is broken, and ignores the upper 32 bits we are hoping to use. The issue
is that the flags use the literal 1 rather than 1ULL, so the flags are
signed ints, and one of them is specifically (1 << 31). As a result, the
mask which ORs the flags is a negative integer on machines where int is
32 bit twos complement. When tree-checker evaluates the expression:
btrfs_inode_flags(leaf, iitem) & ~BTRFS_INODE_FLAG_MASK)
The mask is something like 0x80000abc, which gets promoted to u64 with
sign extension to 0xffffffff80000abc. Negating that 64 bit mask leaves
all the upper bits zeroed, and we can't detect unexpected flags.
This suggests that we can't use those bits after all. Luckily, we have
good reason to believe that they are zero anyway. Inode flags are
metadata, which is always checksummed, so any bit flips that would
introduce 1s would cause a checksum failure anyway (excluding the
improbable case of the checksum getting corrupted exactly badly).
Further, unless the 1 << 31 flag is used, the cast to u64 of the 32 bit
inode flag should preserve its value and not add leading zeroes
(at least for twos complement). The only place that flag
(BTRFS_INODE_ROOT_ITEM_INIT) is used is in a special inode embedded in
the root item, and indeed for that inode we see 0xffffffff80000000 as
the flags on disk. However, that inode is never seen by tree checker,
nor is it used in a context where verity might be meaningful.
Theoretically, a future ro flag might cause trouble on that inode, so we
should proactively clean up that mess before it does.
With the introduction of the new ro flags, keep two separate unsigned
masks and check them against the appropriate u32. Since we no longer run
afoul of sign extension, this also stops writing out 0xffffffff80000000
in root_item inodes going forward.
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_check_raid_min_devices() returns error code from the enum
btrfs_err_code and it starts from 1. So there is no need to check if ret
is > 0. So drop this check and also drop the local variable ret.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_run_delalloc_range() failed, we will error out.
But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.
Commit 40f765805f ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.
Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.
By all means the comment is incorrect, just remove the comment along
with the dead check.
Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The data on raid0 and raid10 are supposed to be spread over multiple
devices, so the minimum constraints are set to 2 and 4 respectively.
This is an artificial limit and there's some interest to remove it.
Change this to allow raid0 on one device and raid10 on two devices. This
works as expected eg. when converting or removing devices.
The only difference is when raid0 on two devices gets one device
removed. Unpatched would silently create a single profile, while newly
it would be raid0.
The motivation is to allow to preserve the profile type as long as it
possible for some intermediate state (device removal, conversion), or
when there are disks of different size, with raid0 the otherwise
unusable space of the last device will be used too. Similarly for
raid10, though the two largest devices would need to be the same.
Unpatched kernel will mount and use the degenerate profiles just fine
but won't allow any operation that would not satisfy the stricter device
number constraints, eg. not allowing to go from 3 to 2 devices for
raid10 or various profile conversions.
Example output:
# btrfs fi us -T .
Overall:
Device size: 10.00GiB
Device allocated: 1.01GiB
Device unallocated: 8.99GiB
Device missing: 0.00B
Used: 200.61MiB
Free (estimated): 9.79GiB (min: 9.79GiB)
Free (statfs, df): 9.79GiB
Data ratio: 1.00
Metadata ratio: 1.00
Global reserve: 3.25MiB (used: 0.00B)
Multiple profiles: no
Data Metadata System
Id Path RAID0 single single Unallocated
-- ---------- --------- --------- -------- -----------
1 /dev/sda10 1.00GiB 8.00MiB 1.00MiB 8.99GiB
-- ---------- --------- --------- -------- -----------
Total 1.00GiB 8.00MiB 1.00MiB 8.99GiB
Used 200.25MiB 352.00KiB 16.00KiB
# btrfs dev us .
/dev/sda10, ID: 1
Device size: 10.00GiB
Device slack: 0.00B
Data,RAID0/1: 1.00GiB
Metadata,single: 8.00MiB
System,single: 1.00MiB
Unallocated: 8.99GiB
Note "Data,RAID0/1", with btrfs-progs 5.13+ the number of devices per
profile is printed.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During renames we pin the logs of the roots a bit too early, before the
calls to btrfs_insert_inode_ref(). We can pin the logs after those calls,
since those will not change anything in a log tree.
In a scenario where we have multiple and diverse filesystem operations
running in parallel, those calls can take a significant amount of time,
due to lock contention on extent buffers, and delay log commits from other
tasks for longer than necessary.
So just pin logs after calls to btrfs_insert_inode_ref() and right before
the first operation that can update a log tree.
The following script that uses dbench was used for testing:
$ cat dbench-test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-m single -d single"
echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 16
umount $MNT
The tests were run on a machine with 12 cores, 64G of RAN, a NVMe device
and using a non-debug kernel config (Debian's default config).
The results compare a branch without this patch and without the previous
patch in the series, that has the subject:
"btrfs: eliminate some false positives when checking if inode was logged"
Versus the same branch with these two patches applied.
dbench with 8 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4391359 0.009 249.745
Close 3225882 0.001 3.243
Rename 185953 0.065 240.643
Unlink 886669 0.049 249.906
Deltree 112 2.455 217.433
Mkdir 56 0.002 0.004
Qpathinfo 3980281 0.004 3.109
Qfileinfo 697579 0.001 0.187
Qfsinfo 729780 0.002 2.424
Sfileinfo 357764 0.004 1.415
Find 1538861 0.016 4.863
WriteX 2189666 0.010 3.327
ReadX 6883443 0.002 0.729
LockX 14298 0.002 0.073
UnlockX 14298 0.001 0.042
Flush 307777 2.447 303.663
Throughput 1149.6 MB/sec 8 clients 8 procs max_latency=303.666 ms
dbench with 8 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4269920 0.009 213.532
Close 3136653 0.001 0.690
Rename 180805 0.082 213.858
Unlink 862189 0.050 172.893
Deltree 112 2.998 218.328
Mkdir 56 0.002 0.003
Qpathinfo 3870158 0.004 5.072
Qfileinfo 678375 0.001 0.194
Qfsinfo 709604 0.002 0.485
Sfileinfo 347850 0.004 1.304
Find 1496310 0.017 5.504
WriteX 2129613 0.010 2.882
ReadX 6693066 0.002 1.517
LockX 13902 0.002 0.075
UnlockX 13902 0.001 0.055
Flush 299276 2.511 220.189
Throughput 1187.33 MB/sec 8 clients 8 procs max_latency=220.194 ms
+3.2% throughput, -31.8% max latency
dbench with 16 clients, results before:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5978334 0.028 156.507
Close 4391598 0.001 1.345
Rename 253136 0.241 155.057
Unlink 1207220 0.182 257.344
Deltree 160 6.123 36.277
Mkdir 80 0.003 0.005
Qpathinfo 5418817 0.012 6.867
Qfileinfo 949929 0.001 0.941
Qfsinfo 993560 0.002 1.386
Sfileinfo 486904 0.004 2.829
Find 2095088 0.059 8.164
WriteX 2982319 0.017 9.029
ReadX 9371484 0.002 4.052
LockX 19470 0.002 0.461
UnlockX 19470 0.001 0.990
Flush 418936 2.740 347.902
Throughput 1495.31 MB/sec 16 clients 16 procs max_latency=347.909 ms
dbench with 16 clients, results after:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 5711833 0.029 131.240
Close 4195897 0.001 1.732
Rename 241849 0.204 147.831
Unlink 1153341 0.184 231.322
Deltree 160 6.086 30.198
Mkdir 80 0.003 0.021
Qpathinfo 5177011 0.012 7.150
Qfileinfo 907768 0.001 0.793
Qfsinfo 949205 0.002 1.431
Sfileinfo 465317 0.004 2.454
Find 2001541 0.058 7.819
WriteX 2850661 0.017 9.110
ReadX 8952289 0.002 3.991
LockX 18596 0.002 0.655
UnlockX 18596 0.001 0.179
Flush 400342 2.879 293.607
Throughput 1565.73 MB/sec 16 clients 16 procs max_latency=293.611 ms
+4.6% throughput, -16.9% max latency
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>