5th- and 6th-generation Surface devices have all SAM clients defined in
ACPI, except for the platform profile/performance mode which his handled
via the WSID (Windows Surface Integration Device). Thus, the node groups
for those devices are the same and we can just use a single one instead
of re-defining the same one over and over again.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for the 13" Intel version of the Surface Laptop 4.
Use the existing node group for the Surface Laptop 3 since the 15" AMD
version already shares its WSID HID with its predecessor and there don't
seem to be any significant differences with regards to SAM.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The 15" AMD version of the Surface Laptop 4 shares its WSID HID with the
15" AMD version of the Surface Laptop 3. Update the comments
accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210523134528.798887-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Sometimes, the "base connected" event that we rely on to (re-)attach the
device connected to the base is sent a bit too early. When this happens,
some devices may not be completely ready yet.
Specifically, the battery has been observed to report zero-values for
things like full charge capacity, which, however, is only loaded once
when the driver for that device probes. This can thus result in battery
readings being unavailable.
As we cannot easily and reliably discern between devices that are not
ready yet and devices that are not connected (i.e. will never be ready),
delay adding these devices. This should give them enough time to set up.
The delay is set to 2.5 seconds, which should give us a good safety
margin based on testing and still be fairly responsive for users.
To achieve that delay switch to updating via a delayed work struct,
which means that we can also get rid of some locking.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210405231222.358113-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface Pro 7+ is essentially a refresh of the Surface Pro 7 with
updated hardware and a new WSID identifier.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210309162550.302161-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The sparse tool complains as follows:
drivers/platform/surface/surface_aggregator_registry.c:355:30: warning:
symbol 'ssam_base_hub_group' was not declared. Should it be static?
This symbol is not used outside of surface_aggregator_registry.c, so this
commit marks it static.
Fixes: 797e785646 ("platform/surface: aggregator_registry: Add base device hub")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210309131500.1885772-1-weiyongjun1@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The SSAM_DEFINE_SYNC_REQUEST_x() macros are intended to reduce
boiler-plate code for SSAM request definitions by defining a wrapper
function for the specified request. The client device variants of those
macros, i.e. SSAM_DEFINE_SYNC_REQUEST_CL_x() in particular rely on the
multi-device (MD) variants, e.g.:
#define SSAM_DEFINE_SYNC_REQUEST_CL_R(name, rtype, spec...) \
SSAM_DEFINE_SYNC_REQUEST_MD_R(__raw_##name, rtype, spec) \
int name(struct ssam_device *sdev, rtype *ret) \
{ \
return __raw_##name(sdev->ctrl, sdev->uid.target, \
sdev->uid.instance, ret); \
}
This now creates the problem that it is not possible to declare the
generated functions static via
static SSAM_DEFINE_SYNC_REQUEST_CL_R(...)
as this will only apply to the function defined by the multi-device
macro, i.e. SSAM_DEFINE_SYNC_REQUEST_MD_R(). Thus compiling with
`-Wmissing-prototypes' rightfully complains that there is a 'static'
keyword missing.
To solve this, make all SSAM_DEFINE_SYNC_REQUEST_x() macros define
static functions. Non-client-device macros are also changed for
consistency. In general, we expect those functions to be only used
locally in the respective drivers for the corresponding interfaces, so
having to define a wrapper function to be able to export this should be
the odd case out.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b78b4982d7 ("platform/surface: Add platform profile driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210304190524.1172197-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add HID subsystem (TC=0x15) devices. These devices need to be registered
for 7th-generation Surface models. On previous generations, these
devices are either provided as platform devices via ACPI (Surface Laptop
1 and 2) or implemented as standard USB device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the detachment system (DTX) SSAM device for the Surface Book 3. This
device is accessible under the base (TC=0x11) subsystem.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-6-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add the SSAM platform profile device to the SSAM device registry. This
device is accessible under the thermal subsystem (TC=0x03) and needs to
be registered for all Surface models.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-5-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add battery subsystem (TC=0x02) devices (battery and AC) to the SSAM
device registry. These devices need to be registered for 7th-generation
Surface models. On 5th- and 6th-generation models, these devices are
handled via the standard ACPI battery/AC interface, which in turn
accesses the same SSAM interface via the Surface ACPI Notify (SAN)
driver.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-4-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface Book 3 has a detachable base part. While the top part
(so-called clipboard) contains the CPU, touchscreen, and primary
battery, the base contains, among other things, a keyboard, touchpad,
and secondary battery.
Those devices do not react well to being accessed when the base part is
detached and should thus be removed and added in sync with the base. To
facilitate this, we introduce a virtual base device hub, which
automatically removes or adds the devices registered under it.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-3-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface System Aggregator Module (SSAM) subsystem provides various
functionalities, which are separated by spreading them across multiple
devices and corresponding drivers. Parts of that functionality / some of
those devices, however, can (as far as we currently know) not be
auto-detected by conventional means. While older (specifically 5th- and
6th-)generation models do advertise most of their functionality via
standard platform devices in ACPI, newer generations do not.
As we are currently also not aware of any feasible way to query said
functionalities dynamically, this poses a problem. There is, however, a
device in ACPI that seems to be used by Windows for identifying
different Surface models: The Windows Surface Integration Device (WSID).
This device seems to have a HID corresponding to the overall set of
functionalities SSAM provides for the associated model.
This commit introduces a registry providing non-detectable device
information via software nodes. In addition, a SSAM platform hub driver
is introduced, which takes care of creating and managing the SSAM
devices specified in this registry. This approach allows for a
hierarchical setup akin to ACPI and is easily extendable, e.g. via
firmware node properties.
Note that this commit only provides the basis for the platform hub and
registry, and does not add any content to it. The registry will be
expanded in subsequent commits.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210212115439.1525216-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
