process_backlog() can batch increments of sd->input_queue_head,
saving some memory bandwidth.
Also add READ_ONCE()/WRITE_ONCE() annotations around
sd->input_queue_head accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
input_queue_tail_incr_save() is incrementing the sd queue_tail
and save it in the flow last_qtail.
Two issues here :
- no lock protects the write on last_qtail, we should use appropriate
annotations.
- We can perform this write after releasing the per-cpu backlog lock,
to decrease this lock hold duration (move away the cache line miss)
Also move input_queue_head_incr() and rps helpers to include/net/rps.h,
while adding rps_ prefix to better reflect their role.
v2: Fixed a build issue (Jakub and kernel build bots)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can remove a goto and a label by reversing a condition.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If under extreme cpu backlog pressure enqueue_to_backlog() has
to drop a packet, it could do this without dirtying a cache line
and potentially slowing down the target cpu.
Move sd->dropped into a separate cache line, and make it atomic.
In non pressure mode, this field is not touched, no need to consume
valuable space in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the device attached to the packet given to enqueue_to_backlog()
is not running, we drop the packet.
But we accidentally increase sd->dropped, giving false signals
to admins: sd->dropped should be reserved to cpu backlog pressure,
not to temporary glitches at device dismantles.
While we are at it, perform the netif_running() test before
we get the rps lock, and use REASON_DEV_READY
drop reason instead of NOT_SPECIFIED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move dev_xmit_recursion() and friends to net/core/dev.h
They are only used from net/core/dev.c and net/core/filter.c.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kick_defer_list_purge() is defined in net/core/dev.c
and used from net/core/skubff.c
Because we need softnet_data, include <linux/netdevice.h>
from net/core/dev.h
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin says:
====================
ice: add PFCP filter support
Add support for creating PFCP filters in switchdev mode. Add pfcp module
that allows to create a PFCP-type netdev. The netdev then can be passed to
tc when creating a filter to indicate that PFCP filter should be created.
To add a PFCP filter, a special netdev must be created and passed to tc
command:
ip link add pfcp0 type pfcp
tc filter add dev eth0 ingress prio 1 flower pfcp_opts \
1:12ab/ff:fffffffffffffff0 skip_hw action mirred egress redirect \
dev pfcp0
Changes in iproute2 [1] are required to use pfcp_opts in tc.
ICE COMMS package is required as it contains PFCP profiles.
Part of this patchset modifies IP_TUNNEL_*_OPTs, which were previously
stored in a __be16. All possible values have already been used, making
it impossible to add new ones.
* 1-3: add new bitmap_{read,write}(), which is used later in the IP
tunnel flags code (from Alexander's ARM64 MTE series[2]);
* 4-14: some bitmap code preparations also used later in IP tunnels;
* 15-17: convert IP tunnel flags from __be16 to a bitmap;
* 18-21: add PFCP module and support for it in ice.
[1] https://lore.kernel.org/netdev/20230614091758.11180-1-marcin.szycik@linux.intel.com
[2] https://lore.kernel.org/linux-kernel/20231218124033.551770-1-glider@google.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for creating PFCP filters in switchdev mode. Add support
for parsing PFCP-specific tc options: S flag and SEID.
To create a PFCP filter, a special netdev must be created and passed
to tc command:
ip link add pfcp0 type pfcp
tc filter add dev eth0 ingress prio 1 flower pfcp_opts \
1:123/ff:fffffffffffffff0 skip_hw action mirred egress redirect \
dev pfcp0
Changes in iproute2 [1] are required to be able to use pfcp_opts in tc.
ICE COMMS package is required to create a filter as it contains PFCP
profiles.
Link: https://lore.kernel.org/netdev/20230614091758.11180-1-marcin.szycik@linux.intel.com [1]
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FLOW_DISSECTOR_KEY_ENC_OPTS can be used for multiple headers, but currently
it is treated as GTP-exclusive in ice. Rename ICE_TC_FLWR_FIELD_ENC_OPTS to
ICE_TC_FLWR_FIELD_GTP_OPTS and check for tunnel type earlier. After this
refactor, it is easier to add new headers using FLOW_DISSECTOR_KEY_ENC_OPTS
- instead of checking tunnel type in ice_tc_count_lkups() and
ice_tc_fill_tunnel_outer(), it needs to be checked only once, in
ice_parse_tunnel_attr().
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In PFCP receive path set metadata needed by flower code to do correct
classification based on this metadata.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet Forwarding Control Protocol (PFCP) is a 3GPP Protocol
used between the control plane and the user plane function.
It is specified in TS 29.244[1].
Note that this module is not designed to support this Protocol
in the kernel space. There is no support for parsing any PFCP messages.
There is no API that could be used by any userspace daemon.
Basically it does not support PFCP. This protocol is sophisticated
and there is no need for implementing it in the kernel. The purpose
of this module is to allow users to setup software and hardware offload
of PFCP packets using tc tool.
When user requests to create a PFCP device, a new socket is created.
The socket is set up with port number 8805 which is specific for
PFCP [29.244 4.2.2]. This allow to receive PFCP request messages,
response messages use other ports.
Note that only one PFCP netdev can be created.
Only IPv4 is supported at this time.
[1] https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=3111
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that there are helpers for converting IP tunnel flags between the
old __be16 format and the bitmap format, make sure they work as expected
by adding a couple of tests to the networking testing suite. The helpers
are all inline, so no dependencies on the related CONFIG_* (or a
standalone module) are needed.
Cover three possible cases:
1. No bits past BIT(15) are set, VTI/SIT bits are not set. This
conversion is almost a direct assignment.
2. No bits past BIT(15) are set, but VTI/SIT bit is set. During the
conversion, it must be transformed into BIT(16) in the bitmap,
but still compatible with the __be16 format.
3. The bitmap has bits past BIT(15) set (not the VTI/SIT one). The
result will be truncated.
Note that currently __IP_TUNNEL_FLAG_NUM is 17 (incl. special),
which means that the result of this case is currently
semi-false-positive. When BIT(17) is finally here, it will be
adjusted accordingly.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT
have been defined as __be16. Now all of those 16 bits are occupied
and there's no more free space for new flags.
It can't be simply switched to a bigger container with no
adjustments to the values, since it's an explicit Endian storage,
and on LE systems (__be16)0x0001 equals to
(__be64)0x0001000000000000.
We could probably define new 64-bit flags depending on the
Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on
LE, but that would introduce an Endianness dependency and spawn a
ton of Sparse warnings. To mitigate them, all of those places which
were adjusted with this change would be touched anyway, so why not
define stuff properly if there's no choice.
Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the
value already coded and a fistful of <16 <-> bitmap> converters and
helpers. The two flags which have a different bit position are
SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as
__cpu_to_be16(), but as (__force __be16), i.e. had different
positions on LE and BE. Now they both have strongly defined places.
Change all __be16 fields which were used to store those flags, to
IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) ->
unsigned long[1] for now, and replace all TUNNEL_* occurrences to
their bitmap counterparts. Use the converters in the places which talk
to the userspace, hardware (NFP) or other hosts (GRE header). The rest
must explicitly use the new flags only. This must be done at once,
otherwise there will be too many conversions throughout the code in
the intermediate commits.
Finally, disable the old __be16 flags for use in the kernel code
(except for the two 'irregular' flags mentioned above), to prevent
any accidental (mis)use of them. For the userspace, nothing is
changed, only additions were made.
Most noticeable bloat-o-meter difference (.text):
vmlinux: 307/-1 (306)
gre.ko: 62/0 (62)
ip_gre.ko: 941/-217 (724) [*]
ip_tunnel.ko: 390/-900 (-510) [**]
ip_vti.ko: 138/0 (138)
ip6_gre.ko: 534/-18 (516) [*]
ip6_tunnel.ko: 118/-10 (108)
[*] gre_flags_to_tnl_flags() grew, but still is inlined
[**] ip_tunnel_find() got uninlined, hence such decrease
The average code size increase in non-extreme case is 100-200 bytes
per module, mostly due to sizeof(long) > sizeof(__be16), as
%__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers
are able to expand the majority of bitmap_*() calls here into direct
operations on scalars.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv6 tunnels which use purely-kernel __ip6_tnl_parm structure
to store params inside the kernel, IPv4 tunnel code uses the same
ip_tunnel_parm which is being used to talk with the userspace.
This makes it difficult to alter or add any fields or use a
different format for whatever data.
Define struct ip_tunnel_parm_kern, a 1:1 copy of ip_tunnel_parm for
now, and use it throughout the code. Define the pieces, where the copy
user <-> kernel happens, as standalone functions, and copy the data
there field-by-field, so that the kernel-side structure could be easily
modified later on and the users wouldn't have to care about this.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dc34d50366 ("lib: test_bitmap: add compile-time
optimization/evaluations assertions") initially missed __assign_bit(),
which led to that quite a time passed before I realized it doesn't get
optimized at compilation time. Now that it does, add test for that just
to make sure nothing will break one day.
To make things more interesting, use bitmap_complement() and
bitmap_full(), thus checking their compile-time evaluation as well. And
remove the misleading comment mentioning the workaround removed recently
in favor of adding the whole file to GCov exceptions.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have generic bitmap_read() and bitmap_write(), which are
inline and try to take care of non-bound-crossing and aligned cases
to keep them optimized, collapse bitmap_{get,set}_value8() into
simple wrappers around the former ones.
bloat-o-meter shows no difference in vmlinux and -2 bytes for
gpio-pca953x.ko, which says the optimization didn't suffer due to
that change. The converted helpers have the value width embedded
and always compile-time constant and that helps a lot.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, tools have *ALIGN*() macros scattered across the unrelated
headers, as there are only 3 of them and they were added separately
each time on an as-needed basis.
Anyway, let's make it more consistent with the kernel headers and allow
using those macros outside of the mentioned headers. Create
<linux/align.h> inside the tools/ folder and include it where needed.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bitmap_set_bits() does not start with the FS' prefix and may collide
with a new generic helper one day. It operates with the FS-specific
types, so there's no change those two could do the same thing.
Just add the prefix to exclude such possible conflict.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bitmap_size() is a pretty generic name and one may want to use it for
a generic bitmap API function. At the same time, its logic is
NTFS-specific, as it aligns to the sizeof(u64), not the sizeof(long)
(although it uses ideologically right ALIGN() instead of division).
Add the prefix 'ntfs3_' used for that FS (not just 'ntfs_' to not mix
it with the legacy module) and use generic BITS_TO_U64() while at it.
Suggested-by: Yury Norov <yury.norov@gmail.com> # BITS_TO_U64()
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bitmap_size() is a pretty generic name and one may want to use it for
a generic bitmap API function. At the same time, its logic is not
"generic", i.e. it's not just `nbits -> size of bitmap in bytes`
converter as it would be expected from its name.
Add the prefix 'idset_' used throughout the file where the function
resides.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit b03fc1173c ("bitops: let optimize out non-atomic bitops
on compile-time constants"), the non-atomic bitops are macros which can
be expanded by the compilers into compile-time expressions, which will
result in better optimized object code. Unfortunately, turned out that
passing `volatile` to those macros discards any possibility of
optimization, as the compilers then don't even try to look whether
the passed bitmap is known at compilation time. In addition to that,
the mentioned linkmode helpers are marked with `inline`, not
`__always_inline`, meaning that it's not guaranteed some compiler won't
uninline them for no reason, which will also effectively prevent them
from being optimized (it's a well-known thing the compilers sometimes
uninline `2 + 2`).
Convert linkmode_*_bit() from inlines to macros. Their calling
convention are 1:1 with the corresponding bitops, so that it's not even
needed to enumerate and map the arguments, only the names. No changes in
vmlinux' object code (compiled by LLVM for x86_64) whatsoever, but that
doesn't necessarily means the change is meaningless.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit b03fc1173c ("bitops: let optimize out non-atomic bitops
on compile-time constants"), the compilers are able to expand inline
bitmap operations to compile-time initializers when possible.
However, during the round of replacement if-__set-else-__clear with
__assign_bit() as per Andy's advice, bloat-o-meter showed +1024 bytes
difference in object code size for one module (even one function),
where the pattern:
DECLARE_BITMAP(foo) = { }; // on the stack, zeroed
if (a)
__set_bit(const_bit_num, foo);
if (b)
__set_bit(another_const_bit_num, foo);
...
is heavily used, although there should be no difference: the bitmap is
zeroed, so the second half of __assign_bit() should be compiled-out as
a no-op.
I either missed the fact that __assign_bit() has bitmap pointer marked
as `volatile` (as we usually do for bitops) or was hoping that the
compilers would at least try to look past the `volatile` for
__always_inline functions. Anyhow, due to that attribute, the compilers
were always compiling the whole expression and no mentioned compile-time
optimizations were working.
Convert __assign_bit() to a macro since it's a very simple if-else and
all of the checks are performed inside __set_bit() and __clear_bit(),
thus that wrapper has to be as transparent as possible. After that
change, despite it showing only -20 bytes change for vmlinux (due to
that it's still relatively unpopular), no drastic code size changes
happen when replacing if-set-else-clear for onstack bitmaps with
__assign_bit(), meaning the compiler now expands them to the actual
operations will all the expected optimizations.
Atomic assign_bit() is less affected due to its nature, but let's
convert it to a macro as well to keep the code consistent and not
leave a place for possible suboptimal codegen. Moreover, with certain
kernel configuration it actually gives some saves (x86):
do_ip_setsockopt 4154 4099 -55
Suggested-by: Yury Norov <yury.norov@gmail.com> # assign_bit(), too
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid open-coding that simple expression each time by moving
BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export
it to the rest of the kernel.
Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always
equals to %BITS_PER_BYTE, regardless of the target architecture.
Do the same for the tools ecosystem as well (incl. its version of
bitops.h). The previous implementation had its implicit type of long,
while the new one is int, so adjust the format literal accordingly in
the perf code.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8238b45798 ("wait_on_bit: add an acquire memory barrier") added
a new bitop, test_bit_acquire(), with proper wrapping in order to try to
optimize it at compile-time, but missed the list of bitops used for
checking their prototypes a bit below.
The functions added have consistent prototypes, so that no more changes
are required and no functional changes take place.
Fixes: 8238b45798 ("wait_on_bit: add an acquire memory barrier")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pr_err() messages may be treated as errors by some log readers, so let
us only use them for test failures. For non-error messages, replace them
with pr_info().
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic tests ensuring that values can be added at arbitrary positions
of the bitmap, including those spanning into the adjacent unsigned
longs.
Two new performance tests, test_bitmap_read_perf() and
test_bitmap_write_perf(), can be used to assess future performance
improvements of bitmap_read() and bitmap_write():
[ 0.431119][ T1] test_bitmap: Time spent in test_bitmap_read_perf: 615253
[ 0.433197][ T1] test_bitmap: Time spent in test_bitmap_write_perf: 916313
(numbers from a Intel(R) Xeon(R) Gold 6154 CPU @ 3.00GHz machine running
QEMU).
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The two new functions allow reading/writing values of length up to
BITS_PER_LONG bits at arbitrary position in the bitmap.
The code was taken from "bitops: Introduce the for_each_set_clump macro"
by Syed Nayyar Waris with a number of changes and simplifications:
- instead of using roundup(), which adds an unnecessary dependency
on <linux/math.h>, we calculate space as BITS_PER_LONG-offset;
- indentation is reduced by not using else-clauses (suggested by
checkpatch for bitmap_get_value());
- bitmap_get_value()/bitmap_set_value() are renamed to bitmap_read()
and bitmap_write();
- some redundant computations are omitted.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/lkml/fe12eedf3666f4af5138de0e70b67a07c7f40338.1592224129.git.syednwaris@gmail.com/
Suggested-by: Yury Norov <yury.norov@gmail.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe Roullier says:
====================
Add property in dwmac-stm32 documentation
Introduce property in dwmac-stm32 documentation
- st,ext-phyclk: is present since 2020 in driver so need to explain
it and avoid dtbs check issue : views/kernel/upstream/net-next/arch/arm/boot/dts/st/stm32mp157c-dk2.dtb:
ethernet@5800a000: Unevaluated properties are not allowed
('st,ext-phyclk' was unexpected)
Furthermore this property will be use in upstream of MP13 dwmac glue. (next step)
====================
Link: https://lore.kernel.org/r/20240328185337.332703-1-christophe.roullier@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux kernel dwmac-stm32 driver currently supports three DT
properties used to configure whether PHY clock are generated by
the MAC or supplied to the MAC from the PHY.
Originally there were two properties, st,eth-clk-sel and
st,eth-ref-clk-sel, each used to configure MAC clocking in
different bus mode and for different MAC clock frequency.
Since it is possible to determine the MAC 'eth-ck' clock
frequency from the clock subsystem and PHY bus mode from
the 'phy-mode' property, two disparate DT properties are
no longer required to configure MAC clocking.
Linux kernel commit 1bb694e208 ("net: ethernet: stmmac: simplify phy modes management for stm32")
introduced a third, unified, property st,ext-phyclk. This property
covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
properties, as well as a new use case for 25 MHz clock generated
by the MAC.
The third property st,ext-phyclk is so far undocumented,
document it.
Below table summarizes the clock requirement and clock sources for
supported PHY interface modes.
__________________________________________________________________________
|PHY_MODE | Normal | PHY wo crystal| PHY wo crystal |No 125Mhz from PHY|
| | | 25MHz | 50MHz | |
---------------------------------------------------------------------------
| MII | - | eth-ck | n/a | n/a |
| | | st,ext-phyclk | | |
---------------------------------------------------------------------------
| GMII | - | eth-ck | n/a | n/a |
| | | st,ext-phyclk | | |
---------------------------------------------------------------------------
| RGMII | - | eth-ck | n/a | eth-ck |
| | | st,ext-phyclk | | st,eth-clk-sel or|
| | | | | st,ext-phyclk |
---------------------------------------------------------------------------
| RMII | - | eth-ck | eth-ck | n/a |
| | | st,ext-phyclk | st,eth-ref-clk-sel | |
| | | | or st,ext-phyclk | |
---------------------------------------------------------------------------
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Link: https://lore.kernel.org/r/20240328185337.332703-2-christophe.roullier@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are, especially with multi-attr arrays, many cases
of needing to iterate all attributes of a specific type
in a netlink message or a nested attribute. Add specific
macros to support that case.
Also convert many instances using this spatch:
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
Although I had to undo one bad change this made, and
I also adjusted some other code for whitespace and to
use direct variable initialization now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
udp: small changes on receive path
This series is based on an observation I made in UDP receive path.
The sock_def_readable() costs are pretty high, especially when
epoll is used to generate EPOLLIN events.
First patch annotates races on sk->sk_rcvbuf reads.
Second patch replaces an atomic_add_return()
with a less expensive atomic_add()
Third patch avoids calling sock_def_readable() when possible.
Fourth patch adds sk_wake_async_rcu() to get better inlining
and code generation.
====================
Link: https://lore.kernel.org/r/20240328144032.1864988-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While looking at UDP receive performance, I saw sk_wake_async()
was no longer inlined.
This matters at least on AMD Zen1-4 platforms (see SRSO)
This might be because rcu_read_lock() and rcu_read_unlock()
are no longer nops in recent kernels ?
Add sk_wake_async_rcu() variant, which must be called from
contexts already holding rcu lock.
As SOCK_FASYNC is deprecated in modern days, use unlikely()
to give a hint to the compiler.
sk_wake_async_rcu() is properly inlined from
__udp_enqueue_schedule_skb() and sock_def_readable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_def_readable() is quite expensive (particularly
when ep_poll_callback() is in the picture).
We must call sk->sk_data_ready() when :
- receive queue was empty, or
- SO_PEEK_OFF is enabled on the socket, or
- sk->sk_data_ready is not sock_def_readable.
We still need to call sk_wake_async().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_rcvbuf is read locklessly twice, while other threads
could change its value.
Use a READ_ONCE() to annotate the race.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann says:
====================
address remaining -Wtautological-constant-out-of-range-compare
The warning option was introduced a few years ago but left disabled
by default. All of the actual bugs that this has found have been
fixed in the meantime, and this series should address the remaining
false-positives, as tested on arm/arm64/x86 randconfigs as well as
allmodconfig builds for all architectures supported by clang.
====================
Link: https://lore.kernel.org/r/20240328143051.1069575-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building with 64KB pages, clang points out that xsk->chunk_size
can never be PAGE_SIZE:
drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c:19:22: error: result of comparison of constant 65536 with expression of type 'u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (xsk->chunk_size > PAGE_SIZE ||
~~~~~~~~~~~~~~~ ^ ~~~~~~~~~
In older versions of this code, using PAGE_SIZE was the only
possibility, so this would have never worked on 64KB page kernels,
but the patch apparently did not address this case completely.
As Maxim Mikityanskiy suggested, 64KB chunks are really not all that
useful, so just shut up the warning by adding a cast.
Fixes: 282c0c798f ("net/mlx5e: Allow XSK frames smaller than a page")
Link: https://lore.kernel.org/netdev/20211013150232.2942146-1-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/a7b27541-0ebb-4f2d-bd06-270a4d404613@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240328143051.1069575-9-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description of mdio enable, mdio disable and mdio wait functions.
Add description of skb pointer in axidma_bd data structure.
Remove 'phy_node' description in axienet local data structure since
it is not a valid struct member.
Correct description of struct axienet_option.
Fix below kernel-doc warnings in drivers/net/ethernet/xilinx/:
1) xilinx_axienet_mdio.c:1: warning: no structured comments found
2) xilinx_axienet.h:379: warning: Function parameter or struct member
'skb' not described in 'axidma_bd'
3) xilinx_axienet.h:538: warning: Excess struct member 'phy_node'
description in 'axienet_local'
4) xilinx_axienet.h:1002: warning: expecting prototype for struct
axiethernet_option. Prototype was for struct axienet_option instead
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240328110713.12885-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang static checker(scan-buid):
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:503:2: warning:
Value stored to 'rsp_hdr' is never read [deadcode.DeadStores]
Remove these unused variables to save some space.
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240328020723.4071539-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core in mhi_driver_register() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20240327174810.519676-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NLMSGERR_ATTR_POLICY extack attribute has been ignored by ynl up to
now. Extend extack decoding to include _POLICY and the nested
NL_POLICY_TYPE_ATTR_* attributes.
For example:
./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--create --do newlink --json '{
"ifname": "12345678901234567890",
"linkinfo": {"kind": "bridge"}
}'
Netlink error: Numerical result out of range
nl_len = 104 (88) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'Attribute failed policy validation',
'policy': {'max-length': 15, 'type': 'string'}, 'bad-attr': '.ifname'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240328155636.64688-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann says:
====================
enabled -Wformat-truncation for clang
With randconfig build testing, I found only eight files that produce
warnings with clang when -Wformat-truncation is enabled. This means
we can just turn it on by default rather than only enabling it for
"make W=1".
Unfortunately, gcc produces a lot more warnings when the option
is enabled, so it's not yet possible to turn it on both compilers.
====================
Link: https://lore.kernel.org/r/20240326223825.4084412-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang warns that one error message is too long for its destination buffer:
drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:1876:4: error: 'snprintf' will always be truncated; specified size is 80, but format string expands to at least 94 [-Werror,-Wformat-truncation-non-kprintf]
Reword it to be a bit shorter so it always fits.
Fixes: 70f0302b3f ("net/mlx5: Bridge, implement mdb offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240326223825.4084412-5-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang complains that the temporary string for the name passed into
alloc_workqueue() is too short for its contents:
drivers/net/ethernet/qlogic/qed/qed_main.c:1218:3: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 18 [-Werror,-Wformat-truncation]
There is no need for a temporary buffer, and the actual name of a workqueue
is 32 bytes (WQ_NAME_LEN), so just use the interface as intended to avoid
the truncation.
Fixes: 59ccf86fe6 ("qed: Add driver infrastucture for handling mfw requests.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240326223825.4084412-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
