Btrfs could still inline file data if its size is same as
page size, so don't skip max value here.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If flag NOCOMPRESS is set which means bad compression ratio,
we could avoid call cow_file_range_async() for this case earlier.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
If a file's compression ratios is bad, we will set NOCOMPRESS
flag for it, and it will skip compression for that inode next time.
However, if we remount fs to COMPRESS_FORCE, it still should try
if we could compress pages for that inode, this patch fix wrong
check for this problem.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
We were returning with 0 (success) because we weren't extracting the
error code from em (PTR_ERR(em)). Fix it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Btrfs defragment will utilize COW feature, which means this
did not work for nodatacow option, this problem was detected
by xfstests generic/018 with nodatacow mount option.
Fix this problem by forcing cow for a extent with state
@EXTETN_DEFRAG setting.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"Filipe is doing a careful pass through fsync problems, and these are
the fixes so far. I'll have one more for rc6 that we're still
testing.
My big commit is fixing up some inode hash races that Al Viro found
(thanks Al)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: use insert_inode_locked4 for inode creation
Btrfs: fix fsync data loss after a ranged fsync
Btrfs: kfree()ing ERR_PTRs
Btrfs: fix crash while doing a ranged fsync
Btrfs: fix corruption after write/fsync failure + fsync + log recovery
Btrfs: fix autodefrag with compression
Btrfs was inserting inodes into the hash table before we had fully
set the inode up on disk. This leaves us open to rare races that allow
two different inodes in memory for the same [root, inode] pair.
This patch fixes things by using insert_inode_locked4 to insert an I_NEW
inode and unlock_new_inode when we're ready for the rest of the kernel
to use the inode.
It also makes sure to init the operations pointers on the inode before
going into the error handling paths.
Signed-off-by: Chris Mason <clm@fb.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
While doing a ranged fsync, that is, one whose range doesn't cover the
whole possible file range (0 to LLONG_MAX), we can crash under certain
circumstances with a trace like the following:
[41074.641913] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
(...)
[41074.642692] CPU: 0 PID: 24580 Comm: fsx Not tainted 3.16.0-fdm-btrfs-next-45+ #1
(...)
[41074.643886] RIP: 0010:[<ffffffffa01ecc99>] [<ffffffffa01ecc99>] btrfs_ordered_update_i_size+0x279/0x2b0 [btrfs]
(...)
[41074.644919] Stack:
(...)
[41074.644919] Call Trace:
[41074.644919] [<ffffffffa01db531>] btrfs_truncate_inode_items+0x3f1/0xa10 [btrfs]
[41074.644919] [<ffffffffa01eb54f>] ? btrfs_get_logged_extents+0x4f/0x80 [btrfs]
[41074.644919] [<ffffffffa02137a9>] btrfs_log_inode+0x2f9/0x970 [btrfs]
[41074.644919] [<ffffffff81090875>] ? sched_clock_local+0x25/0xa0
[41074.644919] [<ffffffff8164a55e>] ? mutex_unlock+0xe/0x10
[41074.644919] [<ffffffff810af51d>] ? trace_hardirqs_on+0xd/0x10
[41074.644919] [<ffffffffa0214b4f>] btrfs_log_inode_parent+0x1ef/0x560 [btrfs]
[41074.644919] [<ffffffff811d0c55>] ? dget_parent+0x5/0x180
[41074.644919] [<ffffffffa0215d11>] btrfs_log_dentry_safe+0x51/0x80 [btrfs]
[41074.644919] [<ffffffffa01e2d1a>] btrfs_sync_file+0x1ba/0x3e0 [btrfs]
[41074.644919] [<ffffffff811eda6b>] vfs_fsync_range+0x1b/0x30
(...)
The necessary conditions that lead to such crash are:
* an incremental fsync (when the inode doesn't have the
BTRFS_INODE_NEEDS_FULL_SYNC flag set) happened for our file and it logged
a file extent item ending at offset X;
* the file got the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode, due
to a file truncate operation that reduces the file to a size smaller
than X;
* a ranged fsync call happens (via an msync for example), with a range that
doesn't cover the whole file and the end of this range, lets call it Y, is
smaller than X;
* btrfs_log_inode, sees the flag BTRFS_INODE_NEEDS_FULL_SYNC set and
calls btrfs_truncate_inode_items() to remove all items from the log
tree that are associated with our file;
* btrfs_truncate_inode_items() removes all of the inode's items, and the lowest
file extent item it removed is the one ending at offset X, where X > 0 and
X > Y - before returning, it calls btrfs_ordered_update_i_size() with an offset
parameter set to X;
* btrfs_ordered_update_i_size() sees that X is greater then the current ordered
size (btrfs_inode's disk_i_size) and then it assumes there can't be any ongoing
ordered operation with a range covering the offset X, calling a BUG_ON() if
such ordered operation exists. This assumption is made because the disk_i_size
is only increased after the corresponding file extent item is added to the
btree (btrfs_finish_ordered_io);
* But because our fsync covers only a limited range, such an ordered extent might
exist, and our fsync callback (btrfs_sync_file) doesn't wait for such ordered
extent to finish when calling btrfs_wait_ordered_range();
And then by the time btrfs_ordered_update_i_size() is called, via:
btrfs_sync_file() ->
btrfs_log_dentry_safe() ->
btrfs_log_inode_parent() ->
btrfs_log_inode() ->
btrfs_truncate_inode_items() ->
btrfs_ordered_update_i_size()
We hit the BUG_ON(), which could never happen if the fsync range covered the whole
possible file range (0 to LLONG_MAX), as we would wait for all ordered extents to
finish before calling btrfs_truncate_inode_items().
So just don't call btrfs_ordered_update_i_size() if we're removing the inode's items
from a log tree, which isn't supposed to change the in memory inode's disk_i_size.
Issue found while running xfstests/generic/127 (happens very rarely for me), more
specifically via the fsx calls that use memory mapped IO (and issue msync calls).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
While writing to a file, in inode.c:cow_file_range() (and same applies to
submit_compressed_extents()), after reserving an extent for the file data,
we create a new extent map for the written range and insert it into the
extent map cache. After that, we create an ordered operation, but if it
fails (due to a transient/temporary-ENOMEM), we return without dropping
that extent map, which points to a reserved extent that is freed when we
return. A subsequent incremental fsync (when the btrfs inode doesn't have
the flag BTRFS_INODE_NEEDS_FULL_SYNC) considers this extent map valid and
logs a file extent item based on that extent map, which points to a disk
extent that doesn't contain valid data - it was freed by us earlier, at this
point it might contain any random/garbage data.
Therefore, if we reach an error condition when cowing a file range after
we added the new extent map to the cache, drop it from the cache before
returning.
Some sequence of steps that lead to this:
$ mkfs.btrfs -f /dev/sdd
$ mount -o commit=9999 /dev/sdd /mnt
$ cd /mnt
$ xfs_io -f -c "pwrite -S 0x01 -b 4096 0 4096" -c "fsync" foo
$ xfs_io -c "pwrite -S 0x02 -b 4096 4096 4096"
$ sync
$ od -t x1 foo
0000000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
*
0010000 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
*
0020000
$ xfs_io -c "pwrite -S 0xa1 -b 4096 0 4096" foo
# Now this write + fsync fail with -ENOMEM, which was returned by
# btrfs_add_ordered_extent() in inode.c:cow_file_range().
$ xfs_io -c "pwrite -S 0xff -b 4096 4096 4096" foo
$ xfs_io -c "fsync" foo
fsync: Cannot allocate memory
# Now do a new write + fsync, which will succeed. Our previous
# -ENOMEM was a transient/temporary error.
$ xfs_io -c "pwrite -S 0xee -b 4096 16384 4096" foo
$ xfs_io -c "fsync" foo
# Our file content (in page cache) is now:
$ od -t x1 foo
0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
*
0010000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
*
0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0050000
# Now reboot the machine, and mount the fs, so that fsync log replay
# takes place.
# The file content is now weird, in particular the first 8Kb, which
# do not match our data before nor after the sync command above.
$ od -t x1 foo
0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0010000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
*
0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
*
0050000
# In fact these first 4Kb are a duplicate of the last 4kb block.
# The last write got an extent map/file extent item that points to
# the same disk extent that we got in the write+fsync that failed
# with the -ENOMEM error. btrfs-debug-tree and btrfsck allow us to
# verify that:
$ btrfs-debug-tree /dev/sdd
(...)
item 6 key (257 EXTENT_DATA 0) itemoff 15819 itemsize 53
extent data disk byte 12582912 nr 8192
extent data offset 0 nr 8192 ram 8192
item 7 key (257 EXTENT_DATA 8192) itemoff 15766 itemsize 53
extent data disk byte 0 nr 0
extent data offset 0 nr 8192 ram 8192
item 8 key (257 EXTENT_DATA 16384) itemoff 15713 itemsize 53
extent data disk byte 12582912 nr 4096
extent data offset 0 nr 4096 ram 4096
$ umount /dev/sdd
$ btrfsck /dev/sdd
Checking filesystem on /dev/sdd
UUID: db5e60e1-050d-41e6-8c7f-3d742dea5d8f
checking extents
extent item 12582912 has multiple extent items
ref mismatch on [12582912 4096] extent item 1, found 2
Backref bytes do not match extent backref, bytenr=12582912, ref bytes=4096, backref bytes=8192
backpointer mismatch on [12582912 4096]
Errors found in extent allocation tree or chunk allocation
checking free space cache
checking fs roots
root 5 inode 257 errors 1000, some csum missing
found 131074 bytes used err is 1
total csum bytes: 4
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 123404
file data blocks allocated: 274432
referenced 274432
Btrfs v3.14.1-96-gcc7fd5a-dirty
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs fixes from Chris Mason:
"The biggest of these comes from Liu Bo, who tracked down a hang we've
been hitting since moving to kernel workqueues (it's a btrfs bug, not
in the generic code). His patch needs backporting to 3.16 and 3.15
stable, which I'll send once this is in.
Otherwise these are assorted fixes. Most were integrated last week
during KS, but I wanted to give everyone the chance to test the
result, so I waited for rc2 to come out before sending"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits)
Btrfs: fix task hang under heavy compressed write
Btrfs: fix filemap_flush call in btrfs_file_release
Btrfs: fix crash on endio of reading corrupted block
btrfs: fix leak in qgroup_subtree_accounting() error path
btrfs: Use right extent length when inserting overlap extent map.
Btrfs: clone, don't create invalid hole extent map
Btrfs: don't monopolize a core when evicting inode
Btrfs: fix hole detection during file fsync
Btrfs: ensure tmpfile inode is always persisted with link count of 0
Btrfs: race free update of commit root for ro snapshots
Btrfs: fix regression of btrfs device replace
Btrfs: don't consider the missing device when allocating new chunks
Btrfs: Fix wrong device size when we are resizing the device
Btrfs: don't write any data into a readonly device when scrub
Btrfs: Fix the problem that the replace destroys the seed filesystem
btrfs: Return right extent when fiemap gives unaligned offset and len.
Btrfs: fix wrong extent mapping for DirectIO
Btrfs: fix wrong write range for filemap_fdatawrite_range()
Btrfs: fix wrong missing device counter decrease
Btrfs: fix unzeroed members in fs_devices when creating a fs from seed fs
...
This has been reported and discussed for a long time, and this hang occurs in
both 3.15 and 3.16.
Btrfs now migrates to use kernel workqueue, but it introduces this hang problem.
Btrfs has a kind of work queued as an ordered way, which means that its
ordered_func() must be processed in the way of FIFO, so it usually looks like --
normal_work_helper(arg)
work = container_of(arg, struct btrfs_work, normal_work);
work->func() <---- (we name it work X)
for ordered_work in wq->ordered_list
ordered_work->ordered_func()
ordered_work->ordered_free()
The hang is a rare case, first when we find free space, we get an uncached block
group, then we go to read its free space cache inode for free space information,
so it will
file a readahead request
btrfs_readpages()
for page that is not in page cache
__do_readpage()
submit_extent_page()
btrfs_submit_bio_hook()
btrfs_bio_wq_end_io()
submit_bio()
end_workqueue_bio() <--(ret by the 1st endio)
queue a work(named work Y) for the 2nd
also the real endio()
So the hang occurs when work Y's work_struct and work X's work_struct happens
to share the same address.
A bit more explanation,
A,B,C -- struct btrfs_work
arg -- struct work_struct
kthread:
worker_thread()
pick up a work_struct from @worklist
process_one_work(arg)
worker->current_work = arg; <-- arg is A->normal_work
worker->current_func(arg)
normal_work_helper(arg)
A = container_of(arg, struct btrfs_work, normal_work);
A->func()
A->ordered_func()
A->ordered_free() <-- A gets freed
B->ordered_func()
submit_compressed_extents()
find_free_extent()
load_free_space_inode()
... <-- (the above readhead stack)
end_workqueue_bio()
btrfs_queue_work(work C)
B->ordered_free()
As if work A has a high priority in wq->ordered_list and there are more ordered
works queued after it, such as B->ordered_func(), its memory could have been
freed before normal_work_helper() returns, which means that kernel workqueue
code worker_thread() still has worker->current_work pointer to be work
A->normal_work's, ie. arg's address.
Meanwhile, work C is allocated after work A is freed, work C->normal_work
and work A->normal_work are likely to share the same address(I confirmed this
with ftrace output, so I'm not just guessing, it's rare though).
When another kthread picks up work C->normal_work to process, and finds our
kthread is processing it(see find_worker_executing_work()), it'll think
work C as a collision and skip then, which ends up nobody processing work C.
So the situation is that our kthread is waiting forever on work C.
Besides, there're other cases that can lead to deadlock, but the real problem
is that all btrfs workqueue shares one work->func, -- normal_work_helper,
so this makes each workqueue to have its own helper function, but only a
wraper pf normal_work_helper.
With this patch, I no long hit the above hang.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
When current btrfs finds that a new extent map is going to be insereted
but failed with -EEXIST, it will try again to insert the extent map
but with the length of sectorsize.
This is OK if we don't enable 'no-holes' feature since all extent space
is continuous, we will not go into the not found->insert routine.
But if we enable 'no-holes' feature, it will make things out of control.
e.g. in 4K sectorsize, we pass the following args to btrfs_get_extent():
btrfs_get_extent() args: start: 27874 len 4100
28672 27874 28672 27874+4100 32768
|-----------------------|
|---------hole--------------------|---------data----------|
1) not found and insert
Since no extent map containing the range, btrfs_get_extent() will go
into the not_found and insert routine, which will try to insert the
extent map (27874, 27847 + 4100).
2) first overlap
But it overlaps with (28672, 32768) extent, so -EEXIST will be returned
by add_extent_mapping().
3) retry but still overlap
After catching the -EEXIST, then btrfs_get_extent() will try insert it
again but with 4K length, which still overlaps, so -EEXIST will be
returned.
This makes the following patch fail to punch hole.
d77815461f btrfs: Avoid trucating page or punching hole in a already existed hole.
This patch will use the right length, which is the (exsisting->start -
em->start) to insert, making the above patch works in 'no-holes' mode.
Also, some small code style problems in above patch is fixed too.
Reported-by: Filipe David Manana <fdmanana@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe David Manana <fdmanana@suse.com>
Tested-by: Filipe David Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
If an inode has a very large number of extent maps, we can spend
a lot of time freeing them, which triggers a soft lockup warning.
Therefore reschedule if we need to when freeing the extent maps
while evicting the inode.
I could trigger this all the time by running xfstests/generic/299 on
a file system with the no-holes feature enabled. That test creates
an inode with 11386677 extent maps.
$ mkfs.btrfs -f -O no-holes $TEST_DEV
$ MKFS_OPTIONS="-O no-holes" ./check generic/299
generic/299 382s ...
Message from syslogd@debian-vm3 at Aug 7 10:44:29 ...
kernel:[85304.208017] BUG: soft lockup - CPU#0 stuck for 22s! [umount:25330]
384s
Ran: generic/299
Passed all 1 tests
$ dmesg
(...)
[86304.300017] BUG: soft lockup - CPU#0 stuck for 23s! [umount:25330]
(...)
[86304.300036] Call Trace:
[86304.300036] [<ffffffff81698ba9>] __slab_free+0x54/0x295
[86304.300036] [<ffffffffa02ee9cc>] ? free_extent_map+0x5c/0xb0 [btrfs]
[86304.300036] [<ffffffff811a6cd2>] kmem_cache_free+0x282/0x2a0
[86304.300036] [<ffffffffa02ee9cc>] free_extent_map+0x5c/0xb0 [btrfs]
[86304.300036] [<ffffffffa02e3775>] btrfs_evict_inode+0xd5/0x660 [btrfs]
[86304.300036] [<ffffffff811e7c8d>] ? __inode_wait_for_writeback+0x6d/0xc0
[86304.300036] [<ffffffff816a389b>] ? _raw_spin_unlock+0x2b/0x40
[86304.300036] [<ffffffff811d8cbb>] evict+0xab/0x180
[86304.300036] [<ffffffff811d8dce>] dispose_list+0x3e/0x60
[86304.300036] [<ffffffff811d9b04>] evict_inodes+0xf4/0x110
[86304.300036] [<ffffffff811bd953>] generic_shutdown_super+0x53/0x110
[86304.300036] [<ffffffff811bdaa6>] kill_anon_super+0x16/0x30
[86304.300036] [<ffffffffa02a78ba>] btrfs_kill_super+0x1a/0xa0 [btrfs]
[86304.300036] [<ffffffff811bd3a9>] deactivate_locked_super+0x59/0x80
[86304.300036] [<ffffffff811be44e>] deactivate_super+0x4e/0x70
[86304.300036] [<ffffffff811dec14>] mntput_no_expire+0x174/0x1f0
[86304.300036] [<ffffffff811deab7>] ? mntput_no_expire+0x17/0x1f0
[86304.300036] [<ffffffff811e0517>] SyS_umount+0x97/0x100
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Tested-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we open a file with O_TMPFILE, don't do any further operation on
it (so that the inode item isn't updated) and then force a transaction
commit, we get a persisted inode item with a link count of 1, and not 0
as it should be.
Steps to reproduce it (requires a modern xfs_io with -T support):
$ mkfs.btrfs -f /dev/sdd
$ mount -o /dev/sdd /mnt
$ xfs_io -T /mnt &
$ sync
Then btrfs-debug-tree shows the inode item with a link count of 1:
$ btrfs-debug-tree /dev/sdd
(...)
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 29556736 items 4 free space 15851 generation 6 owner 5
fs uuid f164d01b-1b92-481d-a4e4-435fb0f843d0
chunk uuid 0e3d0e56-bcca-4a1c-aa5f-cec2c6f4f7a6
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
inode generation 3 transid 6 size 0 block group 0 mode 40755 links 1
item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
inode ref index 0 namelen 2 name: ..
item 2 key (257 INODE_ITEM 0) itemoff 15951 itemsize 160
inode generation 6 transid 6 size 0 block group 0 mode 100600 links 1
item 3 key (ORPHAN ORPHAN_ITEM 257) itemoff 15951 itemsize 0
orphan item
checksum tree key (CSUM_TREE ROOT_ITEM 0)
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This is a better solution for the problem addressed in the following
commit:
Btrfs: update commit root on snapshot creation after orphan cleanup
(3821f34888)
The previous solution wasn't the best because of 2 reasons:
1) It added another full transaction commit, which is more expensive
than just swapping the commit root with the root;
2) If a reboot happened after the first transaction commit (the one
that creates the snapshot) and before the second transaction commit,
then we would end up with the same problem if a send using that
snapshot was requested before the first transaction commit after
the reboot.
This change addresses those 2 issues. The second issue is addressed by
switching the commit root in the dentry lookup VFS callback, which is
also called by the snapshot/subvol creation ioctl and performs orphan
cleanup if needed. Like the vfs, the ioctl locks the parent inode too,
preventing race issues between a dentry lookup and snapshot creation.
Cc: Alex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_next_leaf() will use current leaf's last key to search
and then return a bigger one. So it may still return a file extent
item that is smaller than expected value and we will
get an overflow here for @em->len.
This is easy to reproduce for Btrfs Direct writting, it did not
cause any problem, because writting will re-insert right mapping later.
However, by hacking code to make DIO support compression, wrong extent
mapping is kept and it encounter merging failure(EEXIST) quickly.
Fix this problem by looping to find next file extent item that is bigger
than @start or we could not find anything more.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
filemap_fdatawrite_range() expect the third arg to be @end
not @len, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The caller of btrfs_submit_direct_hook() will put the original dio bio
when btrfs_submit_direct_hook() return a error number, so we needn't
put the original bio in btrfs_submit_direct_hook().
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs updates from Chris Mason:
"These are all fixes I'd like to get out to a broader audience.
The biggest of the bunch is Mark's quota fix, which is also in the
SUSE kernel, and makes our subvolume quotas dramatically more
accurate.
I've been running xfstests with these against your current git
overnight, but I'm queueing up longer tests as well"
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: disable strict file flushes for renames and truncates
Btrfs: fix csum tree corruption, duplicate and outdated checksums
Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch
Btrfs: fix compressed write corruption on enospc
btrfs: correctly handle return from ulist_add
btrfs: qgroup: account shared subtrees during snapshot delete
Btrfs: read lock extent buffer while walking backrefs
Btrfs: __btrfs_mod_ref should always use no_quota
btrfs: adjust statfs calculations according to raid profiles
Truncates and renames are often used to replace old versions of a file
with new versions. Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.
Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.
This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held. It's rare, but these things can
deadlock.
This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: Chris Mason <clm@fb.com>
When failing to allocate space for the whole compressed extent, we'll
fallback to uncompressed IO, but we've forgotten to redirty the pages
which belong to this compressed extent, and these 'clean' pages will
simply skip 'submit' part and go to endio directly, at last we got data
corruption as we write nothing.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Chris Mason <clm@fb.com>
RENAME_NOREPLACE is trivial to implement for most filesystems: switch over
to ->rename2() and check for the supported flags. The rest is done by the
VFS.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull btrfs fixes from Chris Mason:
"This fixes some lockups in btrfs reported with rc1. It probably has
some performance impact because it is backing off our spinning locks
more often and switching to a blocking lock. I'll be able to nail
that down next week, but for now I want to get the lockups taken care
of.
Otherwise some more stack reduction and assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix wrong error handle when the device is missing or is not writeable
Btrfs: fix deadlock when mounting a degraded fs
Btrfs: use bio_endio_nodec instead of open code
Btrfs: fix NULL pointer crash when running balance and scrub concurrently
btrfs: Skip scrubbing removed chunks to avoid -ENOENT.
Btrfs: fix broken free space cache after the system crashed
Btrfs: make free space cache write out functions more readable
Btrfs: remove unused wait queue in struct extent_buffer
Btrfs: fix deadlocks with trylock on tree nodes
When we mounted the filesystem after the crash, we got the following
message:
BTRFS error (device xxx): block group xxxx has wrong amount of free space
BTRFS error (device xxx): failed to load free space cache for block group xxx
It is because we didn't update the metadata of the allocated space (in extent
tree) until the file data was written into the disk. During this time, there was
no information about the allocated spaces in either the extent tree nor the
free space cache. when we wrote out the free space cache at this time (commit
transaction), those spaces were lost. In fact, only the free space that is
used to store the file data had this problem, the others didn't because
the metadata of them is updated in the same transaction context.
There are many methods which can fix the above problem
- track the allocated space, and write it out when we write out the free
space cache
- account the size of the allocated space that is used to store the file
data, if the size is not zero, don't write out the free space cache.
The first one is complex and may make the performance drop down.
This patch chose the second method, we use a per-block-group variant to
account the size of that allocated space. Besides that, we also introduce
a per-block-group read-write semaphore to avoid the race between
the allocation and the free space cache write out.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
Pull btrfs updates from Chris Mason:
"The biggest change here is Josef's rework of the btrfs quota
accounting, which improves the in-memory tracking of delayed extent
operations.
I had been working on Btrfs stack usage for a while, mostly because it
had become impossible to do long stress runs with slab, lockdep and
pagealloc debugging turned on without blowing the stack. Even though
you upgraded us to a nice king sized stack, I kept most of the
patches.
We also have some very hard to find corruption fixes, an awesome sysfs
use after free, and the usual assortment of optimizations, cleanups
and other fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (80 commits)
Btrfs: convert smp_mb__{before,after}_clear_bit
Btrfs: fix scrub_print_warning to handle skinny metadata extents
Btrfs: make fsync work after cloning into a file
Btrfs: use right type to get real comparison
Btrfs: don't check nodes for extent items
Btrfs: don't release invalid page in btrfs_page_exists_in_range()
Btrfs: make sure we retry if page is a retriable exception
Btrfs: make sure we retry if we couldn't get the page
btrfs: replace EINVAL with EOPNOTSUPP for dev_replace raid56
trivial: fs/btrfs/ioctl.c: fix typo s/substract/subtract/
Btrfs: fix leaf corruption after __btrfs_drop_extents
Btrfs: ensure btrfs_prev_leaf doesn't miss 1 item
Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
btrfs: free delayed node outside of root->inode_lock
btrfs: replace EINVAL with ERANGE for resize when ULLONG_MAX
Btrfs: fix transaction leak during fsync call
btrfs: Avoid trucating page or punching hole in a already existed hole.
Btrfs: update commit root on snapshot creation after orphan cleanup
Btrfs: ioctl, don't re-lock extent range when not necessary
Btrfs: avoid visiting all extent items when cloning a range
...
When cloning into a file, we were correctly replacing the extent
items in the target range and removing the extent maps. However
we weren't replacing the extent maps with new ones that point to
the new extents - as a consequence, an incremental fsync (when the
inode doesn't have the full sync flag) was a NOOP, since it relies
on the existence of extent maps in the modified list of the inode's
extent map tree, which was empty. Therefore add new extent maps to
reflect the target clone range.
A test case for xfstests follows.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
In inode.c:btrfs_page_exists_in_range(), if the page we got from
the radix tree is an exception entry, which can't be retried, we
exit the loop with a non-NULL page and then call page_cache_release
against it, which is not ok since it's not a valid page. This could
also make us return true when we shouldn't.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
In inode.c:btrfs_page_exists_in_range(), if the page we get from the
radix tree is an exception which should make us retry, set page to
NULL in order to really retry, because otherwise we don't get another
loop iteration executed (page != NULL makes the while loop exit).
This also was making us call page_cache_release after exiting the loop,
which isn't correct because page doesn't point to a valid page, and
possibly return true from the function when we shouldn't.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
In inode.c:btrfs_page_exists_in_range(), if we can't get the page
we need to retry. However we weren't retrying because we weren't
setting page to NULL, which makes the while loop exit immediately
and will make us call page_cache_release after exiting the loop
which is incorrect because our page get didn't succeed. This could
also make us return true when we shouldn't.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Delayed extent operations are triggered during transaction commits.
The goal is to queue up a healthly batch of changes to the extent
allocation tree and run through them in bulk.
This farms them off to async helper threads. The goal is to have the
bulk of the delayed operations being done in the background, but this is
also important to limit our stack footprint.
Signed-off-by: Chris Mason <clm@fb.com>
__extent_writepage has two unrelated parts. First it does the delayed
allocation dance and second it does the mapping and IO for the page
we're actually writing.
This splits it up into those two parts so the stack from one doesn't
impact the stack from the other.
Signed-off-by: Chris Mason <clm@fb.com>
In these instances, we are trying to determine if a page has been accessed
since we began the operation for the sake of retry. This is easily
accomplished by doing a gang lookup in the page mapping radix tree, and it
saves us the dependency on the flag (so that we might eventually delete
it).
btrfs_page_exists_in_range borrows heavily from find_get_page, replacing
the radix tree look up with a gang lookup of 1, so that we can find the
next highest page >= index and see if it falls into our lock range.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Alex Gartrell <agartrell@fb.com>
I've noticed an extra line after "use no compression", but search
revealed much more in messages of more critical levels and rare errors.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This implements the tmpfile callback of struct inode_operations, introduced
in the linux kernel 3.11, and implemented already by some filesystems. This
callback is invoked by the VFS when the flag O_TMPFILE is passed to the open
system call.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
uncompress_inline() is dropping the error from btrfs_decompress() after
testing it and zeroing the page that was supposed to hold decompressed
data. This can silently turn compressed inline data in to zeros if
decompression fails due to corrupt compressed data or memory allocation
failure.
I verified this by manually forcing the error from btrfs_decompress()
for a silly named copy of od:
if (!strcmp(current->comm, "failod"))
ret = -ENOMEM;
# od -x /mnt/btrfs/dir/80 | head -1
0000000 3031 3038 310a 2d30 6f70 6e69 0a74 3031
# echo 3 > /proc/sys/vm/drop_caches
# cp $(which od) /tmp/failod
# /tmp/failod -x /mnt/btrfs/dir/80 | head -1
0000000 0000 0000 0000 0000 0000 0000 0000 0000
The fix is to pass the error to its caller. Which still has a BUG_ON().
So we fix that too.
There seems to be no reason for the zeroing of the page on the error
from btrfs_decompress() but not from the allocation error a few lines
above. So the page zeroing is removed.
Signed-off-by: Zach Brown <zab@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Pull second set of btrfs updates from Chris Mason:
"The most important changes here are from Josef, fixing a btrfs
regression in 3.14 that can cause corruptions in the extent allocation
tree when snapshots are in use.
Josef also fixed some deadlocks in send/recv and other assorted races
when balance is running"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (23 commits)
Btrfs: fix compile warnings on on avr32 platform
btrfs: allow mounting btrfs subvolumes with different ro/rw options
btrfs: export global block reserve size as space_info
btrfs: fix crash in remount(thread_pool=) case
Btrfs: abort the transaction when we don't find our extent ref
Btrfs: fix EINVAL checks in btrfs_clone
Btrfs: fix unlock in __start_delalloc_inodes()
Btrfs: scrub raid56 stripes in the right way
Btrfs: don't compress for a small write
Btrfs: more efficient io tree navigation on wait_extent_bit
Btrfs: send, build path string only once in send_hole
btrfs: filter invalid arg for btrfs resize
Btrfs: send, fix data corruption due to incorrect hole detection
Btrfs: kmalloc() doesn't return an ERR_PTR
Btrfs: fix snapshot vs nocow writting
btrfs: Change the expanding write sequence to fix snapshot related bug.
btrfs: make device scan less noisy
btrfs: fix lockdep warning with reclaim lock inversion
Btrfs: hold the commit_root_sem when getting the commit root during send
Btrfs: remove transaction from send
...
This patch fix a regression caused by the following patch:
Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
break while loop will make us call @spin_unlock() without
calling @spin_lock() before, fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
To compress a small file range(<=blocksize) that is not
an inline extent can not save disk space at all. skip it can
save us some cpu time.
This patch can also fix wrong setting nocompression flag for
inode, say a case when @total_in is 4096, and then we get
@total_compressed 52,because we do aligment to page cache size
firstly, and then we get into conclusion @total_in=@total_compressed
thus we will clear this inode's compression flag.
An exception comes from inserting inline extent failure but we
still have @total_compressed < @total_in,so we will still reset
inode's flag, this is ok, because we don't have good compression
effect.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
While running fsstress and snapshots concurrently, we will hit something
like followings:
Thread 1 Thread 2
|->fallocate
|->write pages
|->join transaction
|->add ordered extent
|->end transaction
|->flushing data
|->creating pending snapshots
|->write data into src root's
fallocated space
After above work flows finished, we will get a state that source and
snapshot root share same space, but source root have written data into
fallocated space, this will make fsck fail to verify checksums for
snapshot root's preallocating file extent data.Nocow writting also
has this same problem.
Fix this problem by syncing snapshots with nocow writting:
1.for nocow writting,if there are pending snapshots, we will
fall into COW way.
2.if there are pending nocow writes, snapshots for this root
will be blocked until nocow writting finish.
Reported-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs changes from Chris Mason:
"This is a pretty long stream of bug fixes and performance fixes.
Qu Wenruo has replaced the btrfs async threads with regular kernel
workqueues. We'll keep an eye out for performance differences, but
it's nice to be using more generic code for this.
We still have some corruption fixes and other patches coming in for
the merge window, but this batch is tested and ready to go"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
Btrfs: fix a crash of clone with inline extents's split
btrfs: fix uninit variable warning
Btrfs: take into account total references when doing backref lookup
Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
Btrfs: fix incremental send's decision to delay a dir move/rename
Btrfs: remove unnecessary inode generation lookup in send
Btrfs: fix race when updating existing ref head
btrfs: Add trace for btrfs_workqueue alloc/destroy
Btrfs: less fs tree lock contention when using autodefrag
Btrfs: return EPERM when deleting a default subvolume
Btrfs: add missing kfree in btrfs_destroy_workqueue
Btrfs: cache extent states in defrag code path
Btrfs: fix deadlock with nested trans handles
Btrfs: fix possible empty list access when flushing the delalloc inodes
Btrfs: split the global ordered extents mutex
Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
Btrfs: reclaim delalloc metadata more aggressively
Btrfs: remove unnecessary lock in may_commit_transaction()
Btrfs: remove the unnecessary flush when preparing the pages
Btrfs: just do dirty page flush for the inode with compression before direct IO
...
