Commit graph

245246 commits

Author SHA1 Message Date
David S. Miller
e474995f29 udp: Use flow key information instead of rt->rt_{src,dst}
We have two cases.

Either the socket is in TCP_ESTABLISHED state and connect() filled
in the inet socket cork flow, or we looked up the route here and
used an on-stack flow.

Track which one it was, and use it to obtain src/dst addrs.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 21:12:48 -07:00
Mahesh Bandewar
eed2a12f1e net: Allow ethtool to set interface in loopback mode.
This patch enables ethtool to set the loopback mode on a given interface.
By configuring the interface in loopback mode in conjunction with a policy
route / rule, a userland application can stress the egress / ingress path
exposing the flows of the change in progress and potentially help developer(s)
understand the impact of those changes without even sending a packet out
on the network.

Following set of commands illustrates one such example -
    a) ip -4 addr add 192.168.1.1/24 dev eth1
    b) ip -4 rule add from all iif eth1 lookup 250
    c) ip -4 route add local 0/0 dev lo proto kernel scope host table 250
    d) arp -Ds 192.168.1.100 eth1
    e) arp -Ds 192.168.1.200 eth1
    f) sysctl -w net.ipv4.ip_nonlocal_bind=1
    g) sysctl -w net.ipv4.conf.all.accept_local=1
    # Assuming that the machine has 8 cores
    h) taskset 000f netserver -L 192.168.1.200
    i) taskset 00f0 netperf -t TCP_CRR -L 192.168.1.100 -H 192.168.1.200 -l 30

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:59:12 -07:00
stephen hemminger
b9f47a3aae tcp_cubic: limit delayed_ack ratio to prevent divide error
TCP Cubic keeps a metric that estimates the amount of delayed
acknowledgements to use in adjusting the window. If an abnormally
large number of packets are acknowledged at once, then the update
could wrap and reach zero. This kind of ACK could only
happen when there was a large window and huge number of
ACK's were lost.

This patch limits the value of delayed ack ratio. The choice of 32
is just a conservative value since normally it should be range of
1 to 4 packets.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:51:57 -07:00
Alexey Dobriyan
47a0200d53 pktgen: use %pI6c for printing IPv6 addresses
I don't know why %pI6 doesn't compress, but the format specifier is
kernel-standard, so use it.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:50:31 -07:00
Ben Hutchings
9c412942a0 ipheth: Properly distinguish length and alignment in URBs and skbs
The USB protocol this driver implements appears to require 2 bytes of
padding in front of each received packet.  This used to be equal to
the value of NET_IP_ALIGN on x86, so the driver abused that constant
and mostly worked, but this is no longer the case.  The driver also
mixed up the URB and packet lengths, resulting in 2 bytes of junk at
the end of the skb.

Introduce a private constant for the 2 bytes of padding; fix this
confusion and check for the under-length case.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:45:13 -07:00
Yaniv Rosner
57cc71bc3c ethtool: Add 20G bit definitions
Add 20G supported and advertising bit definitions.
20G will be supported with the 57840 chips.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
------
 include/linux/ethtool.h |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:42:43 -07:00
David S. Miller
02e73c1edc Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge 2011-05-08 15:39:11 -07:00
David S. Miller
c5216cc70f tcp: Use cork flow info instead of rt->rt_dst in tcp_v4_get_peer()
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:28:29 -07:00
David S. Miller
f1c0a276ea sctp: Don't use rt->rt_{src,dst} in sctp_v4_xmit()
Now we can pick it out of the transport's flow key.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:28:29 -07:00
David S. Miller
ea4fc0d619 ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit().
Now we can pick it out of the provided flow key.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:28:28 -07:00
David S. Miller
d9d8da805d inet: Pass flowi to ->queue_xmit().
This allows us to acquire the exact route keying information from the
protocol, however that might be managed.

It handles all of the possibilities, from the simplest case of storing
the key in inet->cork.fl to the more complex setup SCTP has where
individual transports determine the flow.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:28:28 -07:00
David S. Miller
0e73441992 ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.
Operation order is now transposed, we first create the child
socket then we try to hook up the route.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 15:28:03 -07:00
David S. Miller
77357a9552 ipv4: Create inet_csk_route_child_sock().
This is just like inet_csk_route_req() except that it operates after
we've created the new child socket.

In this way we can use the new socket's cork flow for proper route
key storage.

This will be used by DCCP and TCP child socket creation handling.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 14:34:22 -07:00
David S. Miller
8663c938ce sctp: Store a flowi in transports to provide persistent keying.
Several future simplifications are possible now because of this.

For example, the sctp_addr unions can simply refer directly to
the flowi information.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 14:05:14 -07:00
David S. Miller
b57ae01a8a ipv4: Use cork flow in ip_queue_xmit()
All invokers of ip_queue_xmit() must make certain that the
socket is locked.  All of SCTP, TCP, DCCP, and L2TP now make
sure this is the case.

Therefore we can use the cork flow during output route lookup in
ip_queue_xmit() when the socket route check fails.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 14:05:14 -07:00
David S. Miller
6e86913810 ipv4: Use cork flow in inet_sk_{reselect_saddr,rebuild_header}()
These two functions must be invoked only when the socket is locked
(because socket identity modifications are made non-atomically).

Therefore we can use the cork flow for output route lookups.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 14:05:13 -07:00
David S. Miller
3038eeac02 ipv4: Lock socket and use cork flow in ip4_datagram_connect().
This is to make sure that an l2tp socket's inet cork flow is
fully filled in, when it's encapsulated in UDP.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:48:57 -07:00
David S. Miller
fdbb0f076b l2tp: Use cork flow in l2tp_ip_connect() and l2tp_ip_sendmsg()
Now that the socket is consistently locked in these two routines,
this transformation is legal.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:48:37 -07:00
David S. Miller
6af88da14e l2tp: Fix locking in l2tp_core.c
l2tp_xmit_skb() must take the socket lock.  It makes use of ip_queue_xmit()
which expects to execute in a socket atomic context.

Since we execute this function in software interrupts, we cannot use the
usual lock_sock()/release_sock() sequence, instead we have to use
bh_lock_sock() and see if a user has the socket locked, and if so drop
the packet.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:45:20 -07:00
David S. Miller
2f16270f41 l2tp: Fix locking in l2tp_ip.c
Both l2tp_ip_connect() and l2tp_ip_sendmsg() must take the socket
lock.  They both modify socket state non-atomically, and in particular
l2tp_ip_sendmsg() increments socket private counters without using
atomic operations.
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:39:01 -07:00
David S. Miller
da905bd1d5 tcp: Use cork flow in tcp_v4_connect()
Since this is invoked from inet_stream_connect() the socket is locked
and therefore this usage is safe.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:18:54 -07:00
David S. Miller
2c42758cf6 dccp: Use cork flow in dccp_v4_connect()
Since this is invoked from inet_stream_connect() the socket is locked
and therefore this usage is safe.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 13:18:53 -07:00
Stephen Hemminger
1ab7b6ac27 ethtool: remove phys_id from ethtool_ops
After that all the upstream kernel drivers now use phys_id,
and the old ethtool_ops interface (phys_id) can be removed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-08 12:49:33 -07:00
Daniele Furlan
27aea2128e batman-adv: remove duplicate code from function is_bidirectional_neigh()
In function is_bidirectional_neigh the code that find out the one hop
neighbor is duplicated.

Signed-off-by: Daniele Furlan <daniele.furlan@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Sven Eckelmann
6e215fd8eb batman-adv: Remove multiline comments from line ending
It is slightly irritating that comments after a long line span over
multiple lines without any code. It is easier to put them before the
actual code and reduce the number of lines which the eye has to read.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Antonio Quartulli
2dafb49d84 batman-adv: rename everything from *hna* into *tt* (translation table)
To be coherent, all the functions/variables/constants have been renamed
to the TranslationTable style

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Marek Lindner
01df2b65e9 batman-adv: Fix refcount imbalance in find_router
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Sven Eckelmann
3a4375a9f0 batman-adv: Avoid deadlock between rtnl_lock and s_active
The hard_if_event is called by the notifier with rtnl_lock and tries to
remove sysfs entries when a NETDEV_UNREGISTER event is received. This
will automatically take the s_active lock.

The s_active lock is also used when a new interface is added to a meshif
through sysfs. In that situation we cannot wait for the rntl_lock before
creating the actual batman-adv interface to prevent a deadlock. It is
still possible to try to get the rtnl_lock and immediately abort the
current operation when the trylock call failed.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Sven Eckelmann
c3caf5196c batman-adv: Remove unnecessary hardif_list_lock
hardif_list_lock is unneccessary because we already ensure that no
multiple admin operations can take place through rtnl_lock.
hardif_list_lock only adds additional overhead and complexity.

Critical functions now check whether they are called with rtnl_lock
using ASSERT_RTNL.

It indirectly fixes the problem that orig_hash_del_if() expects that
only one interface is deleted from hardif_list at a time, but
hardif_remove_interfaces() removes all at once and then calls
orig_hash_del_if().

Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:41 +02:00
Marek Lindner
61906ae86d batman-adv: multi vlan support for bridge loop detection
The bridge loop detection for batman-adv allows the bat0 interface
to be bridged into an ethernet segment which other batman-adv nodes
are connected to. In order to also allow multiple VLANs on top of
the bat0 interface to be bridged into the ethernet segment this
patch extends the aforementioned bridge loop detection.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:41 +02:00
Marek Lindner
28f8e546e6 batman-adv: remove misplaced comment
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:07 +02:00
David S. Miller
534eacb5d4 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6 2011-05-07 22:57:22 -07:00
David S. Miller
0f020dec54 hamachi: Put back RX_CHECKSUM
I deleted it by mistake in the TX_CHECKSUM removal
commit.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-07 22:31:35 -07:00
Emil Tantilov
58f6bcf96e ixgbe: add ethtool counters for OS2BMC
OS2BMC registers are available for X540.
This patch adds ethtool counters based on those registers.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:15:45 -07:00
Emil Tantilov
67a74ee2a2 ixgbe: add rxhash support
feed RSS hash into skb->rxhash

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:14:22 -07:00
Jeff Kirsher
936db3559f igb: convert to ethtool set_phys_id
Based on patch from Stephen Hemminger.
Convert igb driver to use new set_phys_id ethtool interface.

CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:11:57 -07:00
Jeff Kirsher
6435909199 e1000: convert to set_phys_id
Based on the original patch from Stephen Hemminger.
Convert to new LED control infrastucture and remove no longer
necessary bits.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:10:13 -07:00
Jeff Kirsher
a70b86ae20 e100: implemenet set_phys_id
Based on the original patch from Stephen Hemminger.
Implement set_phys_id to control LED.

CC: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-07 03:08:38 -07:00
David S. Miller
706527280e ipv4: Initialize cork->opt using NULL not 0.
Noticed by Joe Perches.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 16:01:15 -07:00
David S. Miller
b80d72261a ipv4: Initialize on-stack cork more efficiently.
ip_setup_cork() explicitly initializes every member of
inet_cork except flags, addr, and opt.  So we can simply
set those three members to zero instead of using a
memset() via an empty struct assignment.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-05-06 15:37:57 -07:00
David S. Miller
bdc712b4c2 inet: Decrease overhead of on-stack inet_cork.
When we fast path datagram sends to avoid locking by putting
the inet_cork on the stack we use up lots of space that isn't
necessary.

This is because inet_cork contains a "struct flowi" which isn't
used in these code paths.

Split inet_cork to two parts, "inet_cork" and "inet_cork_full".
Only the latter of which has the "struct flowi" and is what is
stored in inet_sock.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2011-05-06 15:37:57 -07:00
Roland Dreier
e328d41082 vmxnet3: Consistently disable irqs when taking adapter->cmd_lock
Using the vmxnet3 driver produces a lockdep warning because
vmxnet3_set_mc(), which is called with mc->mca_lock held, takes
adapter->cmd_lock.  However, there are a couple of places where
adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a
softirq that tries to take mc->mca_lock could happen while
adapter->cmd_lock is held, leading to an AB-BA deadlock.

I'm not sure if this is a real potential deadlock or not, but the
simplest and best fix seems to be simply to make sure we take cmd_lock
with spin_lock_irqsave() everywhere -- the places with plain spin_lock
just look like oversights.

The full enormous lockdep warning is:

 =========================================================
 [ INFO: possible irq lock inversion dependency detected ]
 2.6.39-rc6+ #1
 ---------------------------------------------------------
 ifconfig/567 just changed the state of lock:
  (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
 but this lock took another, SOFTIRQ-unsafe lock in the past:
  (&(&adapter->cmd_lock)->rlock){+.+...}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
 4 locks held by ifconfig/567:
  #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20
  #1:  ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0
  #2:  (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0
  #3:  (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280

 the shortest dependencies between 2nd lock and 1st lock:
   -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 {
      HARDIRQ-ON-W at:
                                            [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      SOFTIRQ-ON-W at:
                                            [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10
                                            [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                            [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                            [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                            [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                            [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                            [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                            [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                            [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                            [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                            [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                            [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                            [<ffffffff813745b6>] driver_register+0x76/0x140
                                            [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                            [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                            [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                            [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                            [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
      INITIAL USE at:
                                           [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                           [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                           [<ffffffff81571156>] _raw_spin_lock+0x36/0x70
                                           [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3]
                                           [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3]
                                           [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                           [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                           [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                           [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                           [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                           [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                           [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                           [<ffffffff813745b6>] driver_register+0x76/0x140
                                           [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                           [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                           [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                           [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                           [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    }
    ... key      at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3]
    ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0
    [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3]
    [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0
    [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50
    [<ffffffff81470127>] __dev_open+0xc7/0x100
    [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180
    [<ffffffff81470568>] dev_change_flags+0x28/0x70
    [<ffffffff814da960>] devinet_ioctl+0x730/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

  -> (_xmit_ETHER){+.....} ops: 6 {
     HARDIRQ-ON-W at:
                                          [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                          [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                          [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                          [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                          [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                          [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                          [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                          [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                          [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                          [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                          [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                          [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                          [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                          [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                          [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                          [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                          [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                          [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                          [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                          [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                          [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                          [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                          [<ffffffff813745b6>] driver_register+0x76/0x140
                                          [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                          [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                          [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                          [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                          [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
     INITIAL USE at:
                                         [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                         [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                         [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                         [<ffffffff81475618>] __dev_mc_add+0x38/0x90
                                         [<ffffffff814756a0>] dev_mc_add+0x10/0x20
                                         [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
                                         [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                         [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                         [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
                                         [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                         [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
                                         [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
                                         [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
                                         [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
                                         [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
                                         [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
                                         [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
                                         [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
                                         [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
                                         [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
                                         [<ffffffff81373a2e>] driver_attach+0x1e/0x20
                                         [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
                                         [<ffffffff813745b6>] driver_register+0x76/0x140
                                         [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
                                         [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
                                         [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                         [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
                                         [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
   }
   ... key      at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0
   ... acquired at:
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81475618>] __dev_mc_add+0x38/0x90
    [<ffffffff814756a0>] dev_mc_add+0x10/0x20
    [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0
    [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
    [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
    [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20
    [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70
    [<ffffffff8146a944>] register_netdevice+0x244/0x2d0
    [<ffffffff8146aa0f>] register_netdev+0x3f/0x60
    [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3]
    [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0
    [<ffffffff812dfde9>] pci_device_probe+0x119/0x120
    [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0
    [<ffffffff81373fcb>] __driver_attach+0xab/0xb0
    [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90
    [<ffffffff81373a2e>] driver_attach+0x1e/0x20
    [<ffffffff813735b8>] bus_add_driver+0xc8/0x290
    [<ffffffff813745b6>] driver_register+0x76/0x140
    [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0
    [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw]
    [<ffffffff81002165>] do_one_initcall+0x45/0x190
    [<ffffffff810aa76b>] sys_init_module+0xfb/0x250
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 {
    HARDIRQ-ON-W at:
                                        [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                        [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                        [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                        [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                        [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                        [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                        [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                        [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
    IN-SOFTIRQ-W at:
                                        [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
                                        [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                        [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                        [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
                                        [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
                                        [<ffffffff810666d0>] __do_softirq+0xc0/0x210
                                        [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
                                        [<ffffffff8100d42d>] do_softirq+0xad/0xe0
                                        [<ffffffff81066afe>] irq_exit+0x9e/0xb0
                                        [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
                                        [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
                                        [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
                                        [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
                                        [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
                                        [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
                                        [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
                                        [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
                                        [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
                                        [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
                                        [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
                                        [<ffffffff814da731>] devinet_ioctl+0x501/0x800
                                        [<ffffffff814db508>] inet_ioctl+0x88/0xa0
                                        [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
                                        [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
                                        [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
                                        [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
                                        [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b
    INITIAL USE at:
                                       [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10
                                       [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
                                       [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
                                       [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0
                                       [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430
                                       [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450
                                       [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183
                                       [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6
                                       [<ffffffff81002165>] do_one_initcall+0x45/0x190
                                       [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168
                                       [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10
  }
  ... key      at: [<ffffffff82801be2>] __key.40877+0x0/0x8
  ... acquired at:
    [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
    [<ffffffff8109a32c>] mark_lock+0x19c/0x400
    [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
    [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
    [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
    [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
    [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
    [<ffffffff810666d0>] __do_softirq+0xc0/0x210
    [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
    [<ffffffff8100d42d>] do_softirq+0xad/0xe0
    [<ffffffff81066afe>] irq_exit+0x9e/0xb0
    [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
    [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
    [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
    [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
    [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
    [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
    [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
    [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
    [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
    [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
    [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
    [<ffffffff814da731>] devinet_ioctl+0x501/0x800
    [<ffffffff814db508>] inet_ioctl+0x88/0xa0
    [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
    [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
    [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
    [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
    [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

 stack backtrace:
 Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1
 Call Trace:
  <IRQ>  [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170
  [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170
  [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110
  [<ffffffff8109a32c>] mark_lock+0x19c/0x400
  [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10
  [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400
  [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10
  [<ffffffff81012255>] ? native_sched_clock+0x15/0x70
  [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0
  [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70
  [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40
  [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280
  [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0
  [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0
  [<ffffffff810122b9>] ? sched_clock+0x9/0x10
  [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30
  [<ffffffff810666d0>] __do_softirq+0xc0/0x210
  [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30
  [<ffffffff8157b3dc>] call_softirq+0x1c/0x30
  [<ffffffff8100d42d>] do_softirq+0xad/0xe0
  [<ffffffff81066afe>] irq_exit+0x9e/0xb0
  [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b
  [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20
  <EOI>  [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13
  [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0
  [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0
  [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60
  [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60
  [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0
  [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0
  [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0
  [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20
  [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0
  [<ffffffff814d8223>] inet_del_ifa+0x13/0x20
  [<ffffffff814da731>] devinet_ioctl+0x501/0x800
  [<ffffffff8108a3af>] ? local_clock+0x6f/0x80
  [<ffffffff81575898>] ? do_page_fault+0x268/0x560
  [<ffffffff814db508>] inet_ioctl+0x88/0xa0
  [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70
  [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0
  [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190
  [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570
  [<ffffffff8117737e>] ? fget_light+0x33e/0x430
  [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b
  [<ffffffff81188d01>] sys_ioctl+0x91/0xa0
  [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 13:11:57 -07:00
Dan Rosenberg
a294865978 dccp: handle invalid feature options length
A length of zero (after subtracting two for the type and len fields) for
the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to
the subtraction.  The subsequent code may read past the end of the
options value buffer when parsing.  I'm unsure of what the consequences
of this might be, but it's probably not good.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 13:05:50 -07:00
David S. Miller
ad638bd16d hamachi: Delete TX checksumming code commented out since 1999
TX checksumming support has been ifdef commented out of this driver
for more than 10 years, and it makes references to aspects of the IPv4
stack from back then as well.

If someone has one of these rare cards and wants to properly resurrect
TX checksumming support, they can still get at this code in the
version control history.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-06 11:58:55 -07:00
David S. Miller
7143b7d412 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/tg3.c
2011-05-05 14:59:02 -07:00
David S. Miller
90864fbc76 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2011-05-05 14:09:28 -07:00
Anton Blanchard
228e548e60 net: Add sendmmsg socket system call
This patch adds a multiple message send syscall and is the send
version of the existing recvmmsg syscall. This is heavily
based on the patch by Arnaldo that added recvmmsg.

I wrote a microbenchmark to test the performance gains of using
this new syscall:

http://ozlabs.org/~anton/junkcode/sendmmsg_test.c

The test was run on a ppc64 box with a 10 Gbit network card. The
benchmark can send both UDP and RAW ethernet packets.

64B UDP

batch   pkts/sec
1       804570
2       872800 (+ 8 %)
4       916556 (+14 %)
8       939712 (+17 %)
16      952688 (+18 %)
32      956448 (+19 %)
64      964800 (+20 %)

64B raw socket

batch   pkts/sec
1       1201449
2       1350028 (+12 %)
4       1461416 (+22 %)
8       1513080 (+26 %)
16      1541216 (+28 %)
32      1553440 (+29 %)
64      1557888 (+30 %)

We see a 20% improvement in throughput on UDP send and 30%
on raw socket send.

[ Add sparc syscall entries. -DaveM ]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 11:10:14 -07:00
Kurt Van Dijck
87e9af6cc6 can: fix SJA1000 dlc for RTR packets
RTR frames do have a valid data length code on CAN.
The driver for SJA1000 did not handle that situation properly.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 11:02:22 -07:00
Jiri Pirko
1c5cae815d net: call dev_alloc_name from register_netdevice
Force dev_alloc_name() to be called from register_netdevice() by
dev_get_valid_name(). That allows to remove multiple explicit
dev_alloc_name() calls.

The possibility to call dev_alloc_name in advance remains.

This also fixes veth creation regresion caused by
84c49d8c3e

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:57:45 -07:00
Dmitry Kravkov
e892067497 bnx2x: function descriptions format fixed
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05 10:44:36 -07:00