There is no need to reset hardware when Corrected Error(CE) happens.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add waiting logic for resetting as removing driver,
otherwise call trace will occur due to releasing resource.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable PASID by setting 'sqc' and 'cqc' pasid bits
per queue in Kunpeng 930.
For Kunpeng 920, PASID is effective for all queues once set
in SVA scenarios.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1.
'0' means ZIP is only registered to kernel crypto, and '1' means it's
registered to both kernel crypto and UACCE.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs'
set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the
thread which is sending request, the throughput will be just half.
So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work
on some different CPUS.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The 'qm->curr_qm_qp_num' is not initialized, which will result in failure
to write the current_q file.
Signed-off-by: Sihang Chen <chensihang1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As before, when the ZIP device is too busy to creat a request, it will
return '-EBUSY'. But the crypto process think the '-EBUSY' means a
successful request and wait for its completion.
So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zero length input will cause a call trace when use GZIP
decompress like this:
Unable to handle kernel paging request at virtual address
...
lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip]
Judge the input length and return '-EINVAL' when input is invalid.
Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...")
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ZIP debug registers aren't cleared even if its driver is removed,
so add a clearing operation when remove driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The parameter type of 'pci_set_drvdata' is 'struct hisi_qm',
so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm'
too.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to pass kernel CRYPTO test, ZIP module parameter
'pf_q_num' needs to be set as greater than 1.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Supplement some comments.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some macros which are defined in 'zip.h' are related to the struct
'hisi_zip_sqe' and are only used in 'zip_crypto.c'. So move them from
'zip.h' to 'zip_crypto.c'.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix some code for PClint warning:
Warning - Suspicious Cast
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add print for some error branches.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Macros 'QPC_COMP', 'QPC_DECOMP' and 'HZIP_CTX_Q_NUM' are relative and
incremental. So, use an enum instead.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace 'sprintf' with 'scnprintf' to avoid overrun.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update debugfs interface parameters
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Add prefix 'HZIP' for some macros
2.Add prefix 'hisi_zip' for some functions
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1.Remove the macro 'HZIP_VF_NUM'.
2.Remove 'list' of the struct 'hisi_zip'
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the devices are removed or not existing, the corresponding algorithms
which are registered by 'hisi-zip' driver can't be used.
Move 'hisi_zip_register_to_crypto' from 'hisi_zip_init' to
'hisi_zip_probe'. The algorithms will be registered to crypto only when
there is device bind on the driver. And when the devices are removed,
the algorithms will be unregistered.
In the previous process, the function 'xxx_register_to_crypto' need a lock
and a static variable to judge if the registration is the first time.
Move this action into the function 'hisi_qm_alg_register'. Each device
will call 'hisi_qm_alg_register' to add itself to qm list in probe process
and registering algs when the qm list is empty.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call trace will appear in the Hisilicon crypto driver unbinding or
disabling SRIOV during task running with TFMs on the corresponding
function.
The log looks like this:
[ 293.908078] Call trace:
[ 293.908080] __queue_work+0x494/0x548
[ 293.908081] queue_work_on+0x84/0xd8
[ 293.908092] qm_irq+0x4c/0xd0 [hisi_qm]
[ 293.908096] __handle_irq_event_percpu+0x74/0x2a0
[ 293.908098] handle_irq_event_percpu+0x40/0x98
[ 293.908099] handle_irq_event+0x4c/0x80
[ 293.908101] handle_fasteoi_irq+0xb0/0x170
[ 293.908102] generic_handle_irq+0x3c/0x58
[ 293.908103] __handle_domain_irq+0x68/0xc0
[ 293.908104] gic_handle_irq+0xb4/0x298
[ 293.908105] el1_irq+0xcc/0x180
[ 293.908107] arch_cpu_idle+0x38/0x228
[ 293.908110] default_idle_call+0x20/0x40
[ 293.908113] do_idle+0x1cc/0x2b8
[ 293.908114] cpu_startup_entry+0x2c/0x30
[ 293.908115] rest_init+0xdc/0xe8
[ 293.908117] arch_call_rest_init+0x14/0x1c
[ 293.908117] start_kernel+0x490/0x4c4
This patch adds a waiting logic as user doing the above two operations
to avoid panic. The two operations will hold on in the driver
remove function until the tasks release all their relative TFMs.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the drivers such as HPRE/SEC/ZIP do not implement
'pci_driver.shutdow', a RAS will be triggered at OS rebooting or shutting
down as the hardware device is processing request.
The log looks like this:
NOTICE: [NimbusSecNodeType1]:[2372L]This is sec, Base = 0x141800000
NOTICE: [NimbusSecHandle]:[2319L] SecIntSt = 0x3
NOTICE: [NimbusSecHandle]:[2320L] SecQmIntStatus = 0x2
NOTICE: [PrintSecurityType]:[344L] SecurityType is RECOVERABLE!
This patch offers a new API in qm to shutdown devices, and add shutdown
callbacks in ACC driver based on this new API.
So the running devices will be stopped when the OS reboot or shutdown.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now, there are three reasons of stopping: 'NORMAL', 'SOFT_RESET' and 'FLR'.
In order to keep this, explicitly pass the stop reason as an input
parameter of 'hisi_qm_stop' function.
Fixes: b67202e8ed30("crypto: hisilicon/qm - add state machine for QM")
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If users don't specify NUMA node, the driver will use the ZIP module near
the CPU allocating acomp. Otherwise, it uses the ZIP module according to
the requirement of users.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to be compatible with devices of different versions, V1 in the
accelerator driver is now isolated, and other versions are the previous
V2 processing flow.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add dump information of SQC/CQC/EQC/AEQC/SQE/CQE/EQE/AEQE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Hisilicon ZIP engine driver uses debugfs
to provides IO operation debug information
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently zip sqe is stored in hisi_zip_qp_ctx, which will bring corruption
with multiple parallel users of the crypto tfm.
This patch removes the zip_sqe in hisi_zip_qp_ctx and uses a temporary sqe
instead.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware device can be configured to report directly through MSI, but
this method will not go through RAS, configure all hardware errors that
should be processed by driver to NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some initial value assignment of struct hisi_qm could put into QM.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The codes related use_dma_api is useless which should be removed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add callback reset_prepare and reset_done in QM, The callback
reset_prepare will uninit device error configuration and stop
the QM, the callback reset_done will init the device error
configuration and restart the QM.
Uninit the error configuration will disable device block master OOO
when Multi-bit ECC error occurs to avoid the request of FLR will not
return.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
put q_num_set similar code into qm to reduce the redundancy.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Misc fixes on coding style:
1.Merge QM initialization code into a function
2.Merge QM's PF and VF initialization into a function
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hzip_dfx_regs is never changed and can be made const.
This allows the compiler to put it in the text section instead of the
data section.
Before:
text data bss dec hex filename
15236 6160 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
After:
text data bss dec hex filename
15620 5776 480 21876 5574 drivers/crypto/hisilicon/zip/zip_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The vfs_num module parameter has been used in zip driver, this patch adds
this for HPRE and SEC driver.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clean the duplicate SR-IOV related codes, put all into qm.c.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We plan to move vfs_num related code into qm.c, put the param
vfs_num into struct hisi_qm first.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Encapsulate hisi_qm_alloc_qps_node() to new interface to replace
find_zip_device(), which will fix the bug of creating QP failure
especially in multi-thread scenario.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register qm to uacce framework for user crypto driver
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the module_param uacce_mode, which is not used currently.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In error detect process, a lot of duplicate code can put into qm. We add
two callback(get_dev_hw_err_status and log_dev_hw_err) into struct
hisi_qm_err_ini to handle device error detect, meanwhile the qm error
detect not changed.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Configure zip RAS error type in error handle initialization,
Where ECC 1bit is configured as CE error, others are NFE.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The initialization and uninitialization of zip/hpre/sec/qm hardware error
is processed in respective drivers, which could be unified into qm.c. We
add struct hisi_qm_err_ini into struct hisi_qm, which involve all error
handlers of device and assignment should be done in driver probe.
Signed-off-by: Shukun Tan <tanshukun1@huawei.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We can configure sgl offset fields in ZIP sqe to let ZIP engine read/write
sgl data with skipped data. Hence no need to splite the sgl.
Fixes: 62c455ca85 (crypto: hisilicon - add HiSilicon ZIP accelerator support)
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Zhou Wang <wangzhou1@hisilicon.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
